Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

KNOB

Active
SPE7LX-26-U-8891Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified as KNOB under solicitation number SPE7LX-26-U-8891, is a total small business set-aside for the procurement of 68 units of a knob with NSN 5355-01-382-5286, requiring delivery within 88 days after award. The contract incorporates stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date. Zero-tolerance policies are enforced for hazardous materials: ozone-depleting chemicals are completely prohibited, and mercury or mercury-containing compounds are banned unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, or chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. All items must be asbestos-free, and any substitutions require formal approval under clause L30 and provision 4 conditions. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract explicitly prohibits the use of government identification on non-accepted supplies and mandates full and open competition under a small business set-aside, with Theodore Misiolek designated as the primary point of contact for inquiries.

General Info

KNOB contract for 68 knobs, small business set-aside, 88-day delivery, zero-tolerance for hazardous materials, strict quality standards, no asbestos, approved substitutions only.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

327999 - All Other Miscellaneous Nonmetallic Mineral Product ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUS
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
KNOB
KNOB
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
FULL AND OPEN COMPETITION APPLY
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
SPE7LX-26-U-8891
SECTION B
FOR NSN/Part Number: 5355-01-382-5286 Quantity: 68 EA Purchase Request: 1000237689QTY: 68 Delivery: 88 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 327999
New
DIBBS
COVER, DIALThe contract pertains to the procurement of one unit of a COVER, DIAL with NSN 5355-00-953-5506 under solicitation SPE7L1-26-T-856Z, issued by the Department of Defense's Land Supply Chain. The item is classified under NAICS code 327999 and is subject to DLA Packaging Requirements for Procurement, incorporating all applicable technical and quality standards identified by R or I numbers as defined in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website. Compliance with these standards is mandatory, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The supplier must ensure the item does not contain Class I ozone-depleting substances, in alignment with DLA technical and standardization directives from a 1993 meeting. Delivery is required within five days after date of award to Hill AFB, Utah, zip 84056-5713. The primary point of contact is Kristina Derry, reachable via email and phone listed in the contract data, and responses must be submitted by August 3, 2026. No government identification is to be removed from non-accepted supplies as per regulatory protocol.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL SHThe contract pertains to a nonmetallic special shaped section, supplied on a 25-foot coil, with a total quantity of 26 feet required under purchase request 7017561001 and NSN 9390011794508. Delivery must be completed within five days of order placement, with shipment originating FOB origin and a permitted quantity variance of plus 10 percent and no reduction. Inspection and acceptance both occur at the destination, and the item is classified as a critical application item requiring strict adherence to quality and technical standards outlined in the DLA Master List of Technical and Quality Requirements. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, using non-plastic materials where feasible to avoid environmental contamination, with specific packaging codes and methods defined to prevent distortion during transit and storage. Marking must conform to MIL-STD-129 with no special marking applied. The shipment is destined for Fort Hood, Texas, with a specified freight and markfor address tied to DLA warehouse building 89010. Transportation must use traceable, non-parcel post methods due to the RDD classification and should be dispatched promptly. The contract references defense-sensitive information and mandates removal of government identification from non-accepted supplies. The original required delivery date is July 10, 2026, with no need ship date specified. This solicitation, numbered SPE8E5-26-T-3639, was posted on July 21, 2026, with responses due by August 3, 2026, under NAICS code 327999. Primary point of contact is Nafis Beyah at the Defense Logistics Agency, and all contractual obligations are governed by the DLA’s governing policies as stipulated, including unit of issue alignment with ANSI X12 standards and compliance with all specified technical, quality, and packaging directives.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEET, NONMETALLIC, PROT
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
DIAL-KNOB, LOCK
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
Federal
53--KNOB
DLA Land And Maritime

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 327999
New
DIBBS
WINDOW, DIALThe contract solicitation SPE7LX-26-U-8875 issued by the Defense Logistics Agency under the Strategic Acquisition Program Directorate seeks the procurement of WINDOW, DIAL components identified by NSN 5355010688804, with an estimated quantity of 31 units under an Indefinite Delivery Contract (IDC). The item is classified as a critical application component supplied by SIMMONDS PRECISION PRODUCTS INC with part number 484592, and delivery is required FOB Origin within 573 days after order placement. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951 for packaging and MIL-STD-129 for marking and labeling. Palletization must comply with RP001 DLA Packaging Requirements, and all packaging must be physically marked per RQ017 for bare item identification. Quality assurance requires sampling in accordance with MIL-STD-1916 or ASQ H1331 using a zero-defect acceptance criterion unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the destination point, with no tolerance for variance in quantity. The contract requires electronic invoicing exclusively through WAWF and compliance with federal safety data sheet obligations under 52.223-3, including mandatory updates and submissions. The solicitation incorporates multiple FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility, sustainable products, cybersecurity safeguards, NIST SP 800-171 requirements, and prohibitions on confidential non-disclosure agreements. The contract is structured as a simplified acquisition under the IDC mechanism with a maximum estimated value of $350,000 and a guaranteed minimum of four units per order. No unit pricing is provided, and the 31-unit quantity is explicitly noted as non-binding and estimate-only. Proposals must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by the deadline of August 4, 2026, with no hardcopy submissions accepted. The award will likely follow a Lowest Price Technically Acceptable (LPTA) methodology, as suggested by the automated award designation and absence of complex evaluation criteria, with
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 327999
New
DIBBS
LOCK, SHAFTThe contract solicitation SPE7L3-26-T-103U seeks the procurement of 40 units of a LOCK, SHAFT identified by NSN 5355015149217 at a unit price of $40.000, for a total contract value of $40.000, to be delivered FOB origin within 110 days after award, with a need ship date of April 7, 2026 and an original required delivery date of June 16, 2026. Delivery is to be made to the DLA Distribution facility at New Cumberland, Pennsylvania, where inspection and acceptance by the Government will occur. All packaging must conform to ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which takes precedence, and palletization must comply with RP001. Marking and labeling must adhere to MIL-STD-129, including barcoding and proper identification of hazardous materials. Mercury and mercury-containing compounds are strictly prohibited unless specifically exempted for functional applications such as batteries, fluorescent lamps, sensors, or weapon systems, and any portable mercury-containing devices must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. The contractor must ensure all materials comply with hazardous material labeling requirements under 29 CFR 1910.1200 and are free from hexavalent chromium and other restricted substances. The solicitation requires compliance with multiple FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment verification, sustainable products, cybersecurity safeguards including NIST SP 800-171, safeguarding defense information, subcontracting, claims handling, and prohibitions on acquiring equipment from certain foreign entities. Payment must be submitted electronically through WAWF, and all offerors must have a current UEI and CAGE code registered in SAM, with socioeconomic status representations provided as applicable. Proposals must be submitted via DIBBS by the response deadline of July 23, 2026, and include required certifications on compliance with cybersecurity, whistleblower rights, former DoD official compensation restrictions, and export control. No contract options or additional line items are identified, and the award method is not explicitly stated, though the structure implies a potential LPTA approach.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 327999
New
DIBBS
DIAL, CONTROLThe contract pertains to the procurement of 26 units of a DIAL, CONTROL with NSN 5355-01-262-4156 under solicitation SPE7L3-26-T-103L, issued as a Women-Owned Small Business Set-Aside. The requirement mandates compliance with DLA Packaging Requirements for Procurement and incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The item is specified as not requiring Class I ozone-depleting substances, aligning with established DLA standardization guidelines. Delivery is required within 75 days after delivery order, with the place of performance set at Tracy, California, 95304-5000. The procurement is managed by the Department of Defense through the Land Supplier Operations Vehicle Support office, with Jennifer Taylor as the primary point of contact. The solicitation was posted on July 20, 2026, with responses due by July 23, 2026, under NAICS code 327999 for other miscellaneous manufacturing.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 327999
New
Federal
53--WINDOW,DIALThe solicitation seeks quotes for 31 units of Window Dial, NSN 5355010688804, to be delivered within 573 days of award under a potential Automated Indefinite Delivery Contract with a one-year term or until aggregate order value reaches $350,000, whichever comes first. The guaranteed minimum order quantity is four units annually, with an estimated four orders per year, and deliveries will be directed to various CONUS and OCONUS DLA depots via consolidation and containerization points. Only the approved source codes 89305 and 484592 are eligible. The solicitation is issued as an RFQ through SAM.gov with no hard copies available and no technical specifications, plans, or drawings provided. All responsible sources may submit electronic quotes by the deadline of August 4, 2026, and responses must be received electronically. The contract falls under NAICS code 327999 and is managed by DLA Land and Maritime from Columbus, Ohio. Questions must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided SAM.gov link.
DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 327999
New
DIBBS
Breather Cloth Manufacturing and SupplyThe contract is for the manufacture and supply of 70 units of Breather Cloth, a specialized industrial textile designed to meet military and federal packaging specifications. It is issued as a subcontract under a Service-Disabled Veteran-Owned Small Business Set-Aside, ensuring priority consideration for businesses owned and operated by service-disabled veterans. The North American Industry Classification System code 327999 identifies the work as other textile product mills, indicating the need for precise textile manufacturing capabilities aligned with defense standards. The place of performance is designated as Tinker Air Force Base with a zip code of 73145-8000, specifying where the delivered goods must be received and utilized. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, giving eligible vendors a limited window to submit proposals. The contracting agency is the Department of Defense through Depot Oklahoma, signaling the critical nature of the component for military logistics or equipment packaging applications.
DEPOT OKLAHOMA

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 327999
New
DIBBS
Manufacturing of Nonmetallic Protective SheetingThe contract involves the manufacturing of nonmetallic protective sheeting designated by NSN 9390-01-595-7239 and Part No. 6440389-01M1, requiring full compliance with military specifications and a mandatory Type I 18-month shelf-life standard. The material must be produced to meet exacting performance and durability criteria set forth by defense standards, ensuring suitability for protective applications in operational environments. The award is structured as a subcontract under the broader procurement efforts of the Defense Logistics Agency, with the Department of Defense as the overseeing agency. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, and the place of performance is specified as Joint Base Lewis McChord with ZIP code 98433-5000. The North American Industry Classification System code 327999 identifies the manufacturing category as other nonmetallic mineral product manufacturing. All production must align with the technical and logistical requirements established by the DLA, and the contract is accessible through the DIBBS platform for prospective bidders. There is no set-aside designation, indicating the opportunity is open to all qualified contractors regardless of business size or category.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 327999
New
DIBBS
SHEET, NONMETALLIC, PROTThe contract pertains to the procurement of a nonmetallic protective sheet and related special-shaped sections, identified by NSN 9390015957239 and part number 6440389-01M1, with a shelf life of 18 months classified as Type I, non-extendable. Deliveries are to be made FOB origin within five days of contract award, with no quantity variance allowed, and inspection and acceptance occur at the destination point. Packaging must strictly adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking compliance to MIL-STD-129 and a mandated 10x10 inch MRAP sticker in fluorescent yellow with bold black lettering, placed visibly on palletized shipments destined for DDC depots or CCPs, though OEM-specific colors are authorized for designated contractors under Lean Six Sigma guidelines. Deviations in sticker dimensions are permitted if space constraints prevent full compliance, and no quality notifications are required if stickers are missing or OEMs run out of yellow stock. Hazardous material shipping rules and traceable freight methods are enforced, with no parcel post allowed, and shipments must be delivered to specified military installation addresses in Indiana and Washington state under unique identifiers and project codes. The contract is issued under solicitation SPE8E5-26-T-3624, administered by the Defense Logistics Agency, and is subject to overarching technical and quality requirements referenced from the DLA Master List, with all terms governed by the version in effect at the solicitation or award date.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 326122
New
DIBBS
CLAMP, LOOPThis contract, identified by solicitation number SPE7LX-26-U-8911, is a Total Small Business Set-Aside for the procurement of CLAMP, LOOP with NSN 5340-01-611-4025 and part numbers 90531K and VT10592AA01-3HN from CUMMINS FILTRATION INC. and NORMA PENNSYLVANIA INC. DIV BREEZE respectively. The requirement, for 240 units at a unit price of $1 each, is designated as a DLA DIRECT, CONUS delivery with FOB ORIGIN terms and no quantity variance allowed. Delivery must be completed within 116 days, with inspection and acceptance occurring at the destination. Packaging must strictly comply with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. If the item is classified as hazardous under FED-STD-313, packaging must follow TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is permitted, but all packaging and labeling must conform to MIL-STD-129. Palletization must adhere to RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT. The contract is part of a broader framework incorporating technical and quality specifications referenced through R and I numbers found on the DLA website. The solicitation, issued by the Department of Defense’s Strategic Acquisition Program Directorate, is closed to small businesses only and was posted on July 21, 2026, with responses due by August 5, 2026. The unit of issue is each (EA), and quantities are fixed with no allowance for adjustment. The point of contact for inquiries is Theodore Misiolek, with details provided for email and phone. The contract references a comprehensive set of DLA packaging and quality standards that must be met without exception, and all packaging must be marked and labeled in compliance with MIL-STD-129. While the quantity listed is an estimate, the buyer is not obligated to purchase the full amount, but any awarded contract must strictly follow the defined technical, packaging, and delivery protocols outlined. The NSN and part number are critical identifiers for compliance and logistics tracking, and suppliers must ensure all documentation aligns with the DLA’s eProcurement and unit of issue guidelines.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAINThis contract pertains to the procurement of six plain seals identified by NSN 5330-01-503-4930 under solicitation SPE7LX-26-U-8895, with a delivery requirement of 301 days after award. The item is subject to extensive technical, quality, and export control requirements as defined by the DLA Master List of Technical and Quality Requirements, which incorporate MIL-STD-1916 or ASQ H1331 for sampling unless otherwise specified, with zero non-conformances required in the sample lot unless explicitly stated otherwise. Critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and unspecified attributes are treated as major. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag to prevent ultraviolet degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, weapon systems, or chemical reagents authorized by NAVSEA; where permitted, portable devices must include a second barrier of containment per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals, deviation requests, and source approval documentation, while inspection and acceptance may occur at origin, and all government identification must be removed from non-accepted items. Technical data associated with this contract is subject to export controls under ITAR or EAR, and access is restricted to DLA contractors certified under the US/Canada Joint Certification Program, who have completed required DOD training and been approved by DLA. All contractual obligations are governed by tailored higher-level quality requirements and specific documentation standards for verification and compliance.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
LEVER, LOCK-RELEASEThe contract pertains to the procurement of a Lever, Lock-Release with NSN 5340-01-453-2554 and part number A6210372, under solicitation SPE7LX-26-U-8896, issued by the Department of Defense’s Strategic Acquisition Program Directorate. A total quantity of 135 units is requested at a unit price of $135.00, for a total contract value of $18,225. Delivery is required within 65 days FOB origin, with no variance allowed in quantity. The item is covered under DLA Direct, CONUS terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s packaging requirements and MIL-STD-129 for marking and labeling, with non-hazardous material packaged per ASTM D3951 unless a higher-priority DLA Master List technical or quality requirement applies. Hazardous materials must follow TQ requirement IP025 per Fed-Std-313. The packaging must also adhere to the DLA Packaging Requirements for Procurement (RP001) and palletization standards. Identification of the item must conform to MIL-STD-130N for military property marking, and the contractor must ensure all government identification is removed from non-accepted supplies. The solicitation is open via DIBBS, and the contract is subject to the revision of the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date. The primary point of contact is Theodore Misiolek, with response due by August 5, 2026.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
DIBBS
TREAD, METALLIC, NONSKIDThe contract is for the procurement of two units of metallic nonskid tread with the NSN 2540-01-593-9652 under solicitation SPE7LX-26-U-8910, designated as a Total Small Business Set-Aside. Delivery is required within 109 days after award, and responses must be submitted by August 5, 2026. The item is governed by DLA packaging and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with specific provisions including tailored higher-level quality standards, configuration change management, inspection and acceptance at origin, and strict controls on government identification removal from non-accepted supplies. Only qualified manufacturers listed on approved QPLs or QMLs may supply components, and the contract enforces compliance with MIL-STD-1916 or comparable zero-based sampling plans, assigning verification levels and AQLs according to criticality of attributes. Ozone-depleting chemicals are strictly prohibited, and substitute chemicals require prior approval unless explicitly permitted by specification. Technical data is subject to export controls under ITAR or EAR, restricted to contractors with approved JCP certification, completed DLA training, and authorized access. The contract mandates CMMC Level 2 certification for third-party assessors and requires phosphate coating suppliers to meet specific certification standards. The approved source of supply has been updated from Devcon Corp to ITW Polymers Adhesives North America for part numbers PK9500-3/2 and PK9500-3/2-7. The contracting office is the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek as the primary point of contact.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 314910
New
DIBBS
BAG, CARTRIDGE CLIPThe contract is for the procurement of a neoprene-coated cloth cartridge clip, a critical gun part designated as a Category I munitions item under demilitarization requirements, with strict compliance mandated for technical specifications referenced in the DLA Master List of Technical and Quality Requirements. The item, identified by NSN 1005-01-182-4536 and part number 65751-03013-041, must conform to exact engineering drawings and revision standards, and the actual manufacturer must be formally identified and approved prior to award, with any subsequent changes requiring official contract modification. The product is subject to Product Verification Testing (PVT) before each shipment, requiring five samples from each subcontractor involved in production, one of which may be destroyed during testing, and all samples must be properly marked and traced to their source. Inspection and acceptance occur at the manufacturer’s facility under the Quality Assurance Representative, following zero-defect sampling criteria aligned with MIL-STD-1916 or comparable zero-based plans, with critical attributes held to the highest verification levels and specified AQLs. Packaging must adhere to MIL-STD-2073-1E and DLA requirements, including marking per MIL-STD-129, and no ozone-depleting chemicals are permitted under any circumstances. The contract is a total small business set-aside under NAICS code 314910, with a delivery window of 134 days, FOB origin, no quantity variance allowed, and a unit price of $5.00 for a total of five units.
Textile Bag and Canvas Mills

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP.This contract, identified as CLAMP, LOOP, is a solicitation under number SPE7LX-26-U-8888 issued by the Strategic Acquisition Program Directorate within the Department of Defense for the procurement of eight units of a specific clamp and loop component with NSN 5340-00-582-1474. The solicitation is a total small business set-aside under NAICS code 332510, with responses due by August 5, 2026, and an anticipated delivery deadline of 48 days after award. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, subject to any amendment updates. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific functional applications including batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary to prevent leakage, per NAVSEA 5100-003D. All government identification must be removed from non-accepted supplies, and full compliance with these stipulations is mandatory for contract fulfillment.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTINGThe contract is for the procurement of three mounting brackets with NSN/Part Number 5340-01-693-6794 under solicitation SPE7LX-26-U-8898, with a delivery requirement of 81 days after contract award. The acquisition is structured as a Total Small Business Set-Aside under NAICS code 332510, indicating exclusive eligibility for small businesses. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons or entities without prior authorization from the Department of State or Commerce, including foreign national employees of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory DOD export control training and the DLA questionnaire, may access the controlled data. The solicitation was posted on July 21, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek serving as the primary point of contact.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332994
New
DIBBS
HOUSING ASSY, FEEDERThe item specified is a Housing Assembly, Feeder, manufactured via metal casting, requiring specialized tooling for production, with sourcing and technical support available through DLA’s Aviation, Land & Maritime Supply Chains. The procurement is governed by a comprehensive set of technical, quality, and compliance requirements including CMMC Level 2 certification for third-party assessors, tailored higher-level quality standards for manufacturers and non-manufacturers, and strict configuration change management protocols requiring formal engineering change proposals or variance requests. Inspection and acceptance must occur at origin, and non-accepted items must have all government identification removed. Physical identification of the bare item is mandated, and technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting disclosure to foreign persons without prior Department of State or Commerce authorization, with DFARS 252.225-7048 fully applicable. Access to this controlled data is restricted to DLA contractors who hold JCP certification, have completed mandatory DOD export control training, and received formal approval from DLA. The solicitation, identified as SPE7LX-26-U-8906, is a total small business set-aside under NAICS code 332994, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Four units are required with a delivery deadline 186 days after award. The solicitation closed on August 5, 2026, with a posted date of July 21, 2026. Demilitarization requirements apply as this item falls under Category I Munitions List items per DoDM 4160.28-Vol. 3, and it is subject to DLA packaging standards and covered defense information protocols. All technical and quality specifications referenced must be drawn from the DLA Master List in effect on the solicitation issue date. The primary point of contact for inquiries is Theodore Misiolek of DLA, reachable via email or phone provided.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLYThis contract specifies the procurement of a power supply with NSN 6130-01-502-8006, quantity of six units, under solicitation SPE7LX-26-U-8892, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required FOB origin within 104 days with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while strictly adhering to all DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging, MIL-STD-129 for marking and labeling, and PALLETIZATION standards. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs. The item is designated a critical application, and mercury or mercury-containing compounds are strictly prohibited except for specific exempted uses such as batteries, fluorescent lights, or instrumentation per NAVSEA guidance, with portable mercury-containing devices requiring shockproof design and secondary containment. All technical and quality requirements referenced by R or I numbers in the DLA Master List govern over general standards. The unit of issue is each, and the contract is issued under DLA Direct, CONUS coverage.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
CLEVIS, ROD ENDThe item specified is a CLEVIS, ROD END with NSN 5340-01-579-1843, for a quantity of 61 units, under purchase request 1000237681, with delivery required within 111 days after order. The procurement is conducted under solicitation SPE7LX-26-U-8901, issued on July 21, 2026, with responses due by August 5, 2026. This is a total small business set-aside under FAR 19.5, classified under NAICS code 332722, and managed by the Strategic Acquisition Program Directorate within the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item includes export-controlled technical data subject to ITAR or EAR, restricting disclosure or export to authorized parties only. Access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and authorized clearance via the DLA. DFARS 252.225-7048 governs the handling of this data, including restrictions on foreign nationals, even when employed by U.S. entities. Government identification must be removed from non-accepted supplies, and the primary point of contact for inquiries is Theodore Misiolek, reachable via email and phone.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
BALL JOINTThe contract is for the procurement of a ball joint with NSN 3040-01-600-1867 and part number 2998K321 from McMaster-Carr Supply Co, under solicitation SPE7LX-26-U-8915, with a total quantity of 16 units at a unit price of $16.00, resulting in a total price of $256.00. The requirement is designated as a Total Small Business Set-Aside under NAICS code 333613, and delivery must be made within 49 days FOB origin with no tolerance for quantity variance. All items must be packaged and marked in strict compliance with MIL-STD-129 and ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence over any material standard. Inspection and acceptance occur at the destination point, and packaging must follow DLA’s Packaging Requirements for Procurement (RP001), including palletization standards. The U/I is EA and the QUP is specified as 001, meaning each unit pack contains one item. The solicitation was posted on July 21, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. Primary point of contact is Theodore Misiolek, reachable via phone or email. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable version determined by the solicitation issue date for simplified acquisitions. The item is covered under DLA Direct, CONUS, and the contract explicitly states that the estimated quantity may not be fully purchased by the IDC. All documentation and labeling must conform to the referenced standards and DLA directives without exception.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
BRAKE, BASEThis contract is for the procurement of 21 units of BRAKE, BASE with NSN 3040-01-165-4444 under solicitation SPE7LX-26-U-8900, a total small business set-aside classified under NAICS code 333613. The delivery is due within 99 days after contract award, with responses due by August 5, 2026. The specification incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions controlled by the solicitation issue date for simplified acquisitions. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The product must not contain any Class I ozone-depleting chemicals, and any substitutions require prior approval unless explicitly authorized by the specification. Inspection and acceptance are to occur at origin, and configuration changes must be managed through an Engineering Change Proposal with formal request for variance if deviations are necessary. Technical data associated with this item is subject to export controls under ITAR or EAR, with restrictions on disclosure to foreign persons both domestically and abroad, requiring compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed required DLA training and questionnaires. The contracting office is the Strategic Acquisition Program Directorate within the Department of Defense, with Theodore Misiolek as the primary point of contact.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details