This Solicitation opportunity from Department Of Energy was posted on July 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Laboratory Steam Sterilizer

Closed

6-B185-Q-00354-00Federal

Submission Closed07/22/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

International

University of Alberta - Request for Proposal - CFI High-Performance Liquid Chromatography-Mass Spectrometer (HPLC-MS) and Ultra High Performance Liquid Chromatography (UHPLC) System

Solicitation # AB-2026-06236

The University of Alberta is seeking proposals for the supply, installation, and ongoing support of a High-Performance Liquid Chromatography-Mass Spectrometer (HPLC-MS) and Ultra High-Performance Liquid Chromatography (UHPLC) system. This equipment will be utilized by the Faculty of Science, Department of Chemistry, specifically within the Mass Spectrometry Facility to support various projects involving ESI-HRMS, LC-MS, and LC-MS/MS analyses. This solicitation, identified by number AB-2026-06236, was posted on September 11, 2026, with a response deadline of October 6, 2026. Interested parties should direct inquiries to the primary point of contact, Satinder Atwal, the Senior Supply Consultant.

University of Alberta

POSTED

DEADLINE

Supply of DustTrak DRX Model 8533 External Pumps

POSTED

DEADLINE

Supply of Automated Cell Counter and Analyzer

National Institutes Of Health Olao

POSTED

DEADLINE

Handheld XRF Analyzer Supplier

POSTED

DEADLINE

SCMOS Widefield Camera and Adapter Supplier

National Institutes Of Health Olao

POSTED

DEADLINE

Supply of Flash Point Tester

POSTED

DEADLINE

QX700 E Droplet Digital PCR System Supply

National Institutes Of Health Olao

POSTED

DEADLINE

Temp Controlled 42 Plate Hotel

Solicitation # AB482902

Brookhaven Science Associates (BSA) is soliciting quotations for the procurement of a temperature-controlled plate storage incubator with two stackers and a built-in barcode reader, along with comprehensive on-site installation and training for integration with the Art Robbins CryCam UV imaging system at Brookhaven National Laboratory (BNL). The system must support SBS/ANSI-SLAS, low-profile SBS, and Linbro plates, maintaining temperatures between 4C and 25C. This is a small business set-aside solicitation for a firm fixed price purchase order, with the award based on the lowest total evaluated price from a responsive and responsible offeror. Quotations are due by October 2, 2026, and must remain valid for at least sixty days. The procurement includes strict shipping and pricing requirements. For items under 150lbs, shipping may occur via BSA's FedEx account; otherwise, pricing must be all-inclusive of freight, tariffs, and handling. For foreign products over 150lbs where all-inclusive pricing is unavailable, BNL will act as the Importer of Record under DAP Incoterms. Suppliers must provide the country of origin, Unique Entity Identifier (UEI), and applicable ECCN and HTS codes. All electrical equipment must be certified by a Nationally Recognized Testing Laboratory, and onsite personnel must adhere to stringent security badging and safety protocols, including specific documentation requirements for non-U.S. citizens. The contract incorporates BSA General and Supplemental Terms and Conditions for non-commercial items and onsite work, as well as various FAR clauses.

Brookhaven National Labor -Doe Contractor

POSTED

DEADLINE

Acquisition for 10X Genomics GEN X Epi Multiome

Solicitation # NINDS09281

National Institutes Of Health Olao

POSTED

DEADLINE

Solicitation # 140G0126Q0293

The USGS Geological Survey Florence Bascom Geoscience Center (FBGC) is soliciting quotes under solicitation 140G0126Q0293 for the purchase of a lightweight vibra-coring system to evaluate sub-bottom stratigraphy in coastal areas, rivers, and lakes. The required system must weigh between 100 and 200 lbs, provide at least 3000 lb/ft of adjustable impact force, and exceed 1000 vibrations per minute. Technical specifications include compatibility with 3 and 4-inch core barrels, the ability to collect cores longer than 5 meters, and flexibility to switch between DC-AC or 120-220v power supplies. The procurement also includes the acquisition of a power transformer and 250 meters of cable, with all items to be delivered to Reston, VA, within 60 days after receipt of order. This is a total small business set-aside under NAICS code 334516, with a size standard of 1,000 employees. The contract will be awarded to the responsible offeror providing the lowest priced quotation that receives an acceptable technical compliance rating. Vendors must be registered in the System for Award Management (SAM) and comply with the Buy American Act. Quotes are due by September 16, 2026, with an anticipated award date of September 17, 2026. Payment will be processed electronically through the Invoice Processing Platform (IPP), and invoices must be submitted within 90 calendar days following the expiration of the period of performance.

Ofc Of Acqusition Grants-National

POSTED

DEADLINE

Astromaterials Glovebox Systems - Design & Fabrication (A-BOX)

Solicitation # 80JSC026A-BOX

This notice, issued by NASA’s Johnson Space Center under solicitation number 80JSC026A-BOX, is a Request for Information (RFI) for the design, fabrication, testing, delivery, and installation of controlled-atmosphere glovebox systems to support the Astromaterials Research and Exploration Science Curation Facility. The systems are intended for handling lunar and planetary samples, including those from Artemis missions, and must operate in ambient, cold (−85 to −20 °C), and ultra-cold/cryogenic (< −85 °C) environments while maintaining inert atmosphere conditions. Technical requirements are aligned with the American Glovebox Society Guidelines AGS-G001-2007 (3rd Edition), and compliance with quality standards such as ISO9001, AS9100, and NQA-1 is mandatory. The RFI seeks industry input on feasibility, capabilities, and cost estimates, with no formal proposals required. Access to the technical library containing detailed requirements is granted through SAM.gov after completing a two-step verification process and submitting a formal request form to NASA, with all requestors responsible for U.S. export control compliance. The response deadline has been extended to August 5, 2026, at 4:00 PM Central Time. The RFI emphasizes small business participation and solicit feedback on realistic subcontracting goals, barriers to entry for small businesses, and strategies to enhance involvement such as modularizing scope or encouraging teaming arrangements. NASA is considering potential set-asides for Small Business, Small Disadvantaged Business, HUBZone, Veteran-Owned, Service-Disabled Veteran-Owned, and Women-Owned Small Businesses. Organizational conflicts of interest (OCI) are a significant concern due to the nature of prior involvement in astromaterials handling and related design work; respondents must disclose any potential OCI and propose mitigation strategies, though NASA’s review at this stage does not constitute formal approval or assurance. Responses must be submitted electronically via email to the designated contracting officer and contract specialist, formatted according to Attachment II—Capabilities Questions and Responses—which addresses small business utilization, OCI, technical capability, and business considerations. The place of performance is the ARES Curation Facility in Houston, Texas, and final delivery and installation will occur there. No contract value, pricing, or award criteria are provided, as this is purely an information-gathering phase to inform future procurement strategy. Any information submitted is treated as voluntarily provided under FOIA and will not be publicly

NASA Johnson Space Center

POSTED

DEADLINE

Leica VT1200S Vibrating Blade - Brand name only

Solicitation # 36C25226Q0680

Solicitation 36C25226Q0680 is a brand-name-only request for quote issued by the Department of Veterans Affairs for the procurement of one new, non-refurbished Leica VT1200 S Fully Automated Vibrating Blade Microtome System. This equipment is required by the Research Department at the Jesse Brown VA Medical Center in Chicago, Illinois, to support diabetes mellitus research involving the generation of precision-cut liver slices. The procurement includes the microtome configuration, a NEMA5 15 C13 power cord, VT 1200 Silver Service, and Vibrocheck. The contract is set aside for HUBZone Small Businesses, and the award will be granted based on the Lowest Price Technically Acceptable (LPTA) offer. The successful contractor must deliver the equipment to the Jesse Brown VA Medical Center Warehouse within 30 to 45 calendar days after the award under FOB Destination terms, with shipping fees capped at 250 dollars. No onsite installation is required, but the contractor must provide the manufacturer's standard warranty. Quotes are due by September 16, 2026, at 1 PM CDT and must be submitted electronically to the contracting officer. Offerors must comply with Buy American certifications and specific security and access procedures at the delivery site. Payment will be made electronically upon receipt of the equipment.

252-NETWORK Contract Office 12 (36C252)

POSTED

about 19 hours ago

DEADLINE

in 4 days

AI Contract Overview

The solicitation seeks a laboratory steam sterilizer with an internal volume of 9.7 cubic feet (275 liters), featuring a single door pass-through configuration, and requiring on-site installation along with removal of the existing unit. The unit must operate within temperature ranges of 230°F to 275°F for gravity and vacuum cycles, and 219°F to 275°F for liquid cycles, with an optional low-temperature cycle down to 169°F. Interior dimensions are specified as 21 inches wide by 21 inches high by 38 inches deep, with exterior dimensions for the single-door model measuring 30 inches wide by 74 inches high by 68.125 inches deep. The sterilizer must be manually operated, powered by facility steam, and equipped with an ejector for air removal, installed as a freestanding cabinet requiring enclosure panels. The procurement is governed by a lowest price, technically acceptable methodology, with proposals due by 5:00 PM CST on July 22, 2026, and must include a fully executed ANL-70 Request for Quotation. The contract is issued under solicitation number 6-B185-Q-00354-00 by Argonne National Laboratory, a Department of Energy contractor, with performance taking place in Lemont, Illinois. Compliance with the ANL-70A Representation and Certifications document is mandatory, requiring submission of unique entity identification, SAM compliance verification, small business status, and certifications against counterfeit parts, conflict of interest, and Buy American requirements. Contractors must also comply with cybersecurity standards, including SOC2, PCI-DSS, HITRUST, and NIST frameworks, and are obligated to notify the Laboratory within ten business days of any data breach. On-site work is subject to stringent safety regulations including Title 10 CFR Part 851 and applicable OSHA standards, requiring submission of Job Safety Analyses, Safety Data Sheets, personnel qualifications, and radiation protection plans. All personnel aged 18 or older must present a REAL ID for access, and the Laboratory will not reimburse costs or delays resulting from denied entry. The contract price excludes state and local taxes, which must be itemized separately on invoices. Payment methods include check for domestic vendors and wire transfer for foreign vendors, the latter requiring completion of the ANL-1094 form. Title passes to the Government upon acceptance, with risk of loss

General Info

Procure 9.7 cu ft steam sterilizer, single door, on-site install, meet temp specs, comply with ANL-70A and cybersecurity standards, deliver by July 22, 2026, Lemont, IL.

Agency

Department Of Energy → Argonne National Labor - DOE ContractorView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

Lemont, IL, 60439, USA

Set-Aside

NONE

Documents

(4)

ANL-70A Pre-Award Representations and Certifications

PDF•6 pages•representations-and-certifications

ANL-70+Request+for+Quotation.doc

DOC

ANL-366M Moderate Risk On-Site Supplemental Conditions

PDF•contract-document

Appendix A-71COM-22 Contract Terms and Conditions

PDF•7 pages•contract-document

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 17

Solicitation

Response DeadlineJul 22

Deadline has passed

Submission Closed

07/22/2026, 10:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Energy → Argonne National Labor - DOE Contractor

Contacts1 person available

OfficeLemont, IL, 60439, USA

Organization / Agency

Department Of Energy → Argonne National Labor - DOE Contractor

View Agency Profile

Office AddressLemont, IL, 60439, USA

Contacts

Laura Sanchez

contact@example.gov

Full Description

*THIS RFQ WILL BE EVALUATED BASED ON LOWEST PRICE, TECHNICALLY ACCEPTABLE METHODOLOGY*

Looking to source a laboratory steam sterilizer with on-site installation and removal of old unit.

Please review all applicable documentation and provide a proposal response no later than 5:00 PM CST July 22, 2026.

Within your proposal, please include a fully executed copy of the ANL-70 Request for Quotation.

Any questions can be directed to the Contracting Officer.

Thank you in advance for your participation.

Laboratory Steam Sterilizer Specifications

Internal Volume:

9.7 cu. ft. (275 L)

Door Configurations:

Single Door, Pass-through

Design Operating Temperature:

Gravity/Vacuum Cycles: 230°–275°F (110°–135°C)
Liquid Cycles: 219°–275°F (104°–135°C)
Optional Low Temp Cycle: 169°–212°F (76°–100°C)

Interior Dimensions (w × h × d):

21" × 21" × 38" (532 × 532 × 965 mm)

Exterior Dimensions (w × h × d):

Single Door: 30" × 74" × 68.125" (762 × 1880 × 1222 mm)

Door Operation:

manual (standard)

Steam Source:

facility/house steam (standard)

Alr Removal:

ejector (standard)

Recesses and Barrlers:

freestanding (cabinet enclosure panels required)

More opportunities from Department Of Energy → Argonne National Labor - DOE Contractor

Same awarding agency

NAICS: 54171

New

Federal

Chain Reaction Innovations - Energy Technology Innovation

Solicitation # 6-BB47-P-00203-00

The Chain Reaction Innovations program, managed by Argonne National Laboratory for the Department of Energy, is seeking individual innovators for its 2027 cohort to accelerate the commercialization of high-impact physical science and energy technology. This initiative supports early-stage innovations that align with the DOE mission of advancing national, economic, and energy security. Selected participants are embedded within Argonne National Laboratory for up to 24 months, receiving a personal stipend, travel allowance, and health benefits through an ORISE fellowship. The engagement is structured via non-negotiable Cooperative Research and Development Agreements (CRADAs), beginning with a scope and planning phase of typically less than six months focused on market studies and the development of an Intellectual Property Management Plan. Eligibility is restricted to individuals who are U.S. citizens or lawful permanent residents with at least five years of R&D experience; incorporated entities are prohibited from applying. Evaluation is based on the project leader's technical strength and entrepreneurial drive, the project concept's technical merit and economic impact on the U.S., and the overall fit with laboratory resources. Applicants must submit a comprehensive package via the online portal, including a one-page resume, a five-page technical deck, and detailed narratives regarding their vision and business idea. Continuation into the second year of the program is subject to a midpoint review at the end of the first year to ensure performance meets minimum criteria.

POSTED

DEADLINE

Career Transition and Outplacement ServicesThis subcontract with the Argonne National Laboratory under the Department of Energy provides professional outplacement and career transition services for prime contractors. The scope of work includes delivering coaching, resume assistance, and job search support to employees who have been involuntarily separated due to layoffs. These services are to be provided for one year following termination and can be delivered either through virtual platforms or on-site at the contractor's facility in Lemont. The agreement is governed by the ANL-71COM standard terms and conditions and falls under NAICS code 541612. The primary objective is the successful delivery of completed career transition services to affected personnel.

Human Resources Consulting Services

POSTED

DEADLINE

Outplacement Services

Solicitation # 6-B191-P-00213-00

Argonne National Laboratory, operated by UChicago Argonne, LLC, is seeking a contractor to provide professional and confidential outplacement services for employees involuntarily separated due to workforce restructuring. The scope of work focuses on career transition support, specifically emphasizing skills assessment and resume preparation. Required services include two-day workshops for groups and individuals, online programs, executive one-on-one private sessions, and ongoing counseling for one year following the termination date. These services may be delivered at the contractor's facility or through virtual and remote methods. The contract is structured as a Basic Ordering Agreement with a primary period of performance starting October 4, 2026, for one year, with two additional one-year option periods. Work will be authorized through firm fixed price work orders. Award selection is based on best-value tradeoffs, with the technical proposal—covering similar work experience, technical approach, and personnel qualifications—carrying the most weight. Proposals must be submitted in three parts: technical, business/management, and price. The business/management portion includes a pass-fail evaluation of corporate and financial stability, while the price proposal follows a specific format for various service units. All offerors must provide completed representations and certifications, including compliance with FAR standards regarding telecommunications equipment and human trafficking.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Specialized Packaging & Crating

Power Boiler and Heat Exchanger Manufacturing

POSTED

DEADLINE

Software Development (Embedded/Control)

Custom Computer Programming Services

POSTED

DEADLINE

Specialized Sensor/Optical Component Supply

Motor and Generator Manufacturing

POSTED

DEADLINE

Electronic PCB Assembly & Integration

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Precision Component Fabrication

POSTED

DEADLINE

Technical Research & Development ConsultantThis subcontract for a Technical Research and Development Consultant supports prime contractors on Department of Energy Chain Reaction Innovations projects. The selected provider will perform paper-based analysis and research scope refinement for development phases, ensuring all work aligns with the DOE LEEP technology mission space. Key responsibilities include creating high-level technical overviews utilizing engineering tools and technical simulation software. The contract is managed by Argonne National Laboratory for the Department of Energy and is based in Lemont, Illinois. Required deliverables include research scope refinement documents, technical analysis reports, and a five-page technical deck. The response deadline for this opportunity is October 30, 2026.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

IP Landscape and Management ConsultantThe IP Landscape and Management Consultant subcontract, issued by Argonne National Laboratory for the Department of Energy, focuses on supporting prime contractors within Chain Reaction Innovations projects. The selected consultant will be responsible for performing comprehensive IP landscape surveys and developing formal IP management plans. This work involves utilizing specialized software like Derwent or LexisNexis to conduct patent searches and analysis to ensure freedom to operate, requiring a high level of legal expertise in patent law and strict adherence to conflict of interest policies. The primary deliverables for this engagement are a detailed IP Landscape Survey and a DOE-approved IP Management Plan. The project is based in Lemont, Illinois, under NAICS code 541110. Interested parties must submit their responses by October 30, 2026, at 9:00 AM.

POSTED

DEADLINE

Market Analysis and Commercialization ConsultantThis subcontract opportunity with Argonne National Laboratory for the Department of Energy focuses on providing market analysis and commercialization consultancy for prime contractors involved in Chain Reaction Innovations projects. The selected consultant will be responsible for conducting comprehensive market studies, identifying target customers, analyzing barriers to entry, and utilizing financial modeling tools and market intelligence databases to develop viable path-to-market strategies. A deep understanding of the national and energy security missions of the DOE is required to successfully deliver the necessary market study reports and strategic documentation. The project is categorized under NAICS code 541613 and will be performed in Lemont, Illinois. Interested parties should note that the solicitation was posted on July 21, 2026, with a response deadline of October 30, 2026, at 9:00 AM.

Marketing Consulting Services

POSTED

about 2 months ago

DEADLINE

in about 2 months

View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS