Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Landscape Architecture

Active

International

Response Deadline10/30/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Landscape Architecture supports prime contractors on facility projects for the Municipality of Chatham-Kent. The scope of work focuses on site aesthetics, including the design of green spaces, picnic areas, and playgrounds. The selected provider is responsible for developing comprehensive landscaping plans, detailed planting schedules, and playground equipment specifications that strictly adhere to established safety standards. The final deliverables consist of a complete landscaping plan and a playground design package. Interested parties should note that the solicitation was posted on October 13, 2026, with a response deadline of October 30, 2026. The project falls under NAICS code 541310.

General Info

Landscape architecture subcontract for Chatham-Kent facility projects focusing on green spaces and playgrounds.

Agency

Municipality of Chatham-Kent

NAICS

541310 - Architectural Services

Place of Performance

CAN

Set-Aside

NONE

Documents

This scope was carved out of R26-281.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

R26-281 - Engineering Design Services for the South Kent Baseball Diamond Complex

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 03:00:00 PM UTCin about 17 hours

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMunicipality of Chatham-Kent

ContactsNo contacts available

OfficeN/A

Organization / AgencyMunicipality of Chatham-Kent

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs design for site aesthetics, playgrounds, and green space for prime contractors on Municipality of Chatham-Kent facility projects. Designs playground and picnic areas and overall site landscaping. Develops planting schedules and playground equipment specifications adhering to safety standards. Delivers landscaping plan and playground design package.

Similar Contracts

Same NAICS industry code

City-Wide Form-Based Cambridge Development Code RFQ

Solicitation # BPM059552

The City of Cambridge, Maryland, is seeking a professional planning firm to develop a new, city-wide, transect-oriented, form-based Cambridge Development Code. This project aims to replace the existing Unified Development Code from 2014 and implement the Inspire Cambridge Comprehensive Plan by utilizing New Urbanism principles. The new code will focus on creating walkable blocks, mixed-use housing, and accessible public spaces across seven designated districts, including Downtown, Traditional Neighborhood, and Special Overlay districts. Key deliverables include a comprehensive administration section, a detailed regulating plan map, and specific building form standards that adhere to Maryland land use laws and FEMA floodproofing requirements. Proposals are due by 3:00 PM EST on December 1, 2026. The selection process is based on a scoring system that heavily weights the experience and qualifications of the project director and team, specifically regarding form-based codes, rural-to-urban transects, and illustrative skills. Interested firms must provide a detailed cost proposal including hourly billing rates and a project timeline. The selected firm will enter into a professional services contract and must maintain general liability insurance of at least 1,000,000 dollars per occurrence, naming the City as an additional insured. All inquiries must be directed to the Planning and Zoning Director, and any unauthorized contact with other city officials will result in disqualification.

City of Cambridge

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Feasibility Visioning ArchitectThis subcontract opportunity is for a Feasibility Visioning Architect to support prime contractors on projects for the Science Museum Group in London, UK. The selected professional will be responsible for developing architectural design concepts and conducting comprehensive feasibility assessments to determine project viability. Key deliverables include the production of visioning design documents and detailed feasibility study reports. The role requires a licensed professional architect proficient in the use of BIM, CAD, and 3D rendering tools. All work must be performed in strict compliance with UK building regulations. Interested parties should note that the response deadline for this opportunity is November 24, 2026.

Science Museum Group

POSTED

about 7 hours ago

DEADLINE

Masterplan Feasibility Visioning Architect

Solicitation # SCM4222M

The Science Museum Group is soliciting a contract for a Masterplan Feasibility Visioning Architect under solicitation number SCM4222M. This open competition procurement seeks professional services encompassing advisory architectural services, architectural design, and general architectural, engineering, and planning services. The estimated total value of the contract is 100,000 GBP excluding VAT, or 120,000 GBP including VAT. The estimated period of performance is approximately seven months, running from January 26, 2027, to August 26, 2027. Interested parties must submit their tenders electronically via the designated portal by November 24, 2026, at 3:00pm, with an enquiry deadline of November 19, 2026. All procurement inquiries should be directed to the Science Museum Group procurement email address.

Science Museum Group

POSTED

about 7 hours ago

DEADLINE

Airport Architectural DesignerThis subcontract opportunity is for an Airport Architectural Designer to provide specialized design services for the Bulloch County Board of Commissioners in Georgia. The selected contractor will work under prime contractors to develop architectural designs for various airport facilities, including terminals, hangars, and maintenance buildings. The primary objective is to integrate aesthetic appeal with the rigorous functional requirements of transportation infrastructure, resulting in the delivery of comprehensive architectural blueprints, site plans, and detailed building specifications. The project falls under NAICS code 541310 and was posted on October 29, 2026. Interested parties must submit their responses by the deadline of December 3, 2026, at 8:00 PM. This engagement focuses on ensuring that all airport buildings and facilities meet the specific operational needs of the county's aviation infrastructure.

Bulloch County Board of Commissioners

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Architectural & Engineering (A&E) Design ServicesThis subcontract for Architectural and Engineering Design Services involves providing comprehensive design support for prime contractors on FAA Air Traffic Control Tower projects located at Fort Lauderdale. The scope of work encompasses the full design lifecycle, including validation, preliminary, and final design phases, with a specific focus on equipment layouts and utility connections. Technical execution requires the use of AutoCAD 2019 and Revit for 3D BIM development in accordance with the FAA BIM Guide. All deliverables, including design packages and BIM models, must comply with FAA-STD-002, CSI MasterFormat, and TFDS v2.4 standards. The project is managed under NAICS code 541310 for the Department of Transportation.

697DCK Regional Acquisitions Svcs

POSTED

about 10 hours ago

DEADLINE

National Architect-Engineer Indefinite Delivery/Indefinite Quantity (IDIQ) Contract

Solicitation # National_AE_IDIQ

Pbs Centralized Acquisition Services Idv - West

POSTED

about 10 hours ago

DEADLINE

Architect & Engineering Services, Indefinite-Delivery, Indefinite-Quantity (IDIQ) Multiple Award (A&E) Contracts needed for new construction, renovation, alteration and repairs required by Federal Prison Industries (FPI)

Solicitation # DJU1630000393

Federal Prison Industries (UNICOR) is soliciting proposals for an Indefinite-Delivery, Indefinite-Quantity (IDIQ) Multiple Award contract for Architect and Engineering (A&E) services. The scope of work includes new construction, renovation, alteration, and repairs, with specific task order components covering pre-design site visits, design development, construction documents, bid notification services, and construction administration. This is an 8(a) set-aside procurement with a performance period consisting of a one-year base period and four optional one-year extension periods, totaling up to 60 months. The contract is structured as a Firm Fixed Price agreement using loaded hourly rates, with a guaranteed minimum of 10,000 dollars per awardee for each contract period and a statutory fee limitation of six percent of the estimated construction cost. Selection is conducted via Qualifications-Based Selection (QBS) in accordance with the Brooks Architect-Engineer Act. Offerors must submit SF 330 Parts I and II and demonstrate competence in professional qualifications, specialized experience in correctional environments, capacity, past performance, technical approach, and geographic knowledge. Once qualifications are met, the final award is based on the proposal of fair and reasonable hourly rates, overhead, and profit. Due to the nature of the work, contractor personnel will occupy Public Trust Positions and must adhere to strict Department of Justice security protocols, including non-disclosure agreements, mandatory cybersecurity training, and rigorous PII safeguarding requirements. Proposals are due by October 31, 2026.

Inc Federal Prison Industries

POSTED

about 10 hours ago

DEADLINE

Accessible Beach Hut Design & EngineeringThe Accessible Beach Hut Design and Engineering subcontract involves the architectural and structural design of two beach huts located in Bude, Cornwall, for prime contractors working with Corserv Solutions Limited. The scope of work focuses on creating layouts for accessible public accommodation, utilizing CAD software to produce detailed technical drawings, blueprints, and comprehensive material lists. A critical requirement of the project is ensuring all designs comply with public accessibility standards and utilize materials specifically resistant to salt spray to withstand the coastal environment. The contract requires the delivery of complete design specifications to ensure the structures are durable and inclusive.

Corserv Solutions Limited

POSTED

about 11 hours ago

DEADLINE

2027-2030 On-Call Engineering And Professional Services

Solicitation # 49733

The City of San Rafael is soliciting Statements of Qualifications from consultants and contractors to provide on-call engineering and professional services across Civil, Electrical, Environmental, and Structural disciplines. The city intends to establish a roster of up to five firms per discipline for a three-year term beginning July 1, 2027, and ending June 30, 2030, with an option for a one-year extension. Eligible firms must maintain a principal office in the San Francisco Bay Area. Work will be assigned via individual Task Orders for services such as design, planning, technical studies, project management, and staff augmentation, with compensation based on either fixed fees or hourly rates. Submittals are due by November 19, 2026, at 2:00 PM via Bid Express and must be limited to 10 pages for a single discipline, with an additional five pages allowed for each extra discipline. Evaluation is based on a 100-point system weighing recent experience, responsiveness, stakeholder collaboration, project completion history, reference checks, completeness, and location. Selected contractors must adhere to the city's standard Service Level Agreement, provide comprehensive insurance coverage including workers' compensation and professional liability, and comply with state prevailing wage laws for contracts exceeding 1,000 dollars. Invoicing occurs monthly with payment terms of 30 days, and all authorized work is subject to appropriated funding.

City of San Rafael

POSTED

about 12 hours ago

DEADLINE

Architectural & Engineering (A&E) ServicesThis subcontract for Architectural and Engineering Services supports Ventura Housing warehouse conversion projects in Ventura, California. The selected provider will be responsible for the full design lifecycle, including initial assessments, programming, conceptual design, and the production of final construction documents. Key operational tasks involve conducting field verifications, interviewing staff, and performing cost estimating to ensure all design documents are accurate and capable of securing necessary permits. The primary deliverables for this engagement include conceptual layouts, design development documents, final construction documents, and all required permits. This opportunity falls under NAICS code 541310 and requires responses by November 18, 2026.

Ventura Housing

POSTED

about 12 hours ago

DEADLINE

Lead Architectural Design & ProgrammingThis subcontract for Lead Architectural Design and Programming supports the Michigan Department of Technology, Management and Budget on MDOC capacity realignment projects. The selected provider will be responsible for overall architectural design, space planning, and programming, specifically developing schematic designs and contract documents at the 50 percent and 90 percent stages for a 176-bed Level V and a 240-bed Level IV housing facility. Key deliverables include signed and sealed drawings and reports, with a requirement that all specifications adhere to CSI MasterFormat and coordinate across various engineering disciplines. Qualified candidates must possess specialized experience in Level IV and V security correctional design and demonstrate the ability to meet LEED Silver standards. This opportunity falls under NAICS code 541310 and requires a response by November 5, 2026.

POSTED

about 18 hours ago

DEADLINE

RFP-171-270000000167-2 | 472/26527.ABG; St. Louis & Oaks CFs-Capacity Realignment

Solicitation # RFP-171-270000000167-2

The Michigan Department of Technology, Management and Budget (DTMB) is soliciting professional services for the MDOC Capacity Realignment project to address a statewide shortage of higher-risk prisoner beds. The scope of work involves the design and construction of new housing facilities at two locations: a 176-bed Level V facility at the St. Louis Correctional Facility and 240 Level IV beds at the Oaks Correctional Facility. The project encompasses six comprehensive phases, ranging from program analysis and schematic design through final design and both office and field construction administration. Key technical requirements include designing facilities to a LEED Silver sustainability level, ensuring compliance with ADA Accessibility Guides and the State of Michigan Barrier-Free Access Code, and evaluating existing generator backup system capacities. Proposals are due by November 5, 2026, via the SIGMA VSS portal and are evaluated based on a weighted scale of 80% for the technical proposal and 20% for the cost proposal. Awardees must appoint a Project Manager and key personnel capable of responding to state inquiries within 24 hours. The contract requires strict adherence to Michigan's prevailing wage laws, occupational health and safety acts, and non-discrimination policies. Payments will be disbursed exclusively via Electronic Funds Transfer (EFT) within 30 calendar days of invoice approval. Eligible firms must provide certifications of Michigan-based business status and responsibility certifications as part of their submission.

POSTED

about 18 hours ago

DEADLINE

More opportunities from Municipality of Chatham-Kent

Same awarding agency

One (1) 4WD Ext Cab Half Ton Pickup

Solicitation # R26-300

The Municipality of Chatham-Kent is seeking proposals for the procurement of one 4WD Extended Cab Half-Ton Pickup truck. This solicitation, identified as R26-300, is open for submissions starting October 28, 2026. Interested parties must submit their responses by the deadline of November 12, 2026, at 3:00 PM. The contract will be performed within Canada under the authority of the Municipality of Chatham-Kent.

New Car Dealers

POSTED

DEADLINE

Cost Estimating & Quantity SurveyingThe Municipality of Chatham-Kent is seeking a subcontractor for cost estimating and quantity surveying services for CKPUC facility projects. The selected provider will be responsible for performing detailed quantity take-offs and developing Class A capital cost estimates with a required accuracy range of -5% to +10%. These estimates must encompass utility relocation and environmental clean-up costs, and all deliverables, including the Schedule of Items and Quantities, must be prepared using official CKPUC templates. Preference will be given to candidates who are Certified Cost Professionals. This opportunity is categorized under NAICS code 541330 and is based in Canada. Interested parties must submit their responses by November 10, 2026.

Engineering Services

POSTED

DEADLINE

Resident Engineering & Site InspectionThe Resident Engineering and Site Inspection subcontract for the Municipality of Chatham-Kent involves providing on-site construction oversight and quality assurance for prime contractors working on CKPUC facility projects. The selected provider will be responsible for conducting site inspections, reviewing contractor schedules and shop drawings, responding to requests for information, and preparing payment certificates. Key deliverables include the submission of site inspection reports, meeting minutes, and approved shop drawings. Qualified candidates must possess construction inspection certifications and demonstrate a thorough understanding of prevailing wage compliance. This opportunity is categorized under NAICS code 541330 and is based in Canada. Interested parties must submit their responses by the deadline of November 10, 2026.

Engineering Services

POSTED

DEADLINE

Civil/Hydraulic Engineering DesignThis subcontract for Civil/Hydraulic Engineering Design supports prime contractors on facility projects for the Municipality of Chatham-Kent in Canada. The selected provider will be responsible for performing hydraulic analysis and civil site layout design, which includes developing hydraulic profiles, performing calculations, and creating detailed layout plans, orientations, and sections. Additionally, the contractor must utilize hydraulic modeling software to generate equipment lists and data sheets for all major equipment. A Professional Engineer license is a mandatory requirement for this engagement. The primary deliverables consist of comprehensive hydraulic profiles, layout plans, and equipment data sheets. Interested parties should note the response deadline of November 10, 2026, for this opportunity categorized under NAICS code 541330.

Engineering Services

POSTED

DEADLINE

Instrumentation & Controls (I&C) / SCADA EngineeringThis subcontract for Instrumentation and Controls (I&C) and SCADA Engineering supports prime contractors on facility projects for the Municipality of Chatham-Kent. The selected provider will be responsible for specialized design work, including the development of P&IDs for pumps and instruments, the creation of network architecture for SCADA integration, and the authoring of Process Control Narratives to manage pump sequencing, alarms, and interlocks. All work must strictly adhere to CKPUC SCADA Standards. Key deliverables for this engagement include updated control schematics, network architecture diagrams, and comprehensive Process Control Narratives. The project falls under NAICS code 541330 and is based in Canada. Interested parties must submit their responses by the deadline of November 10, 2026.

Engineering Services

POSTED

DEADLINE

Electrical Engineering DesignThis subcontract for Electrical Engineering Design supports prime contractors on CKPUC facility projects for the Municipality of Chatham-Kent in Canada. The scope of work involves comprehensive electrical engineering and design services, including the development of single line diagrams, electrical site plans for power supply and load allocation, and electrical floor plans. Additionally, the selected provider will design control panel elevations for electrical and SCADA systems and conduct sizing calculations for permanent generators. The contract requires the performing party to hold a Professional Engineer license to ensure technical compliance and safety. Key deliverables include detailed electrical design drawings, schedules, and specifications. Interested parties should note the response deadline of November 10, 2026, for this opportunity categorized under NAICS code 541330.

Engineering Services

POSTED

DEADLINE

Chatham Sanitary PS #3 Pump Upgrades

Solicitation # R26-252

The Municipality of Chatham-Kent is seeking professional engineering services for the upgrade and expansion of the Chatham Sanitary Pumping Station No. 3 (CHPS #3) and its associated sanitary forcemain infrastructure. The project is structured in three phases: Phase 1 focuses on station upgrades including pump rehabilitation, electrical, SCADA, and structural improvements; Phase 2 involves a Schedule B Municipal Class Environmental Assessment and the design of a new twin sanitary forcemain with a Thames River crossing; and Phase 3 covers the preliminary design for long-term capacity upgrades to support future growth. The selected respondent will be responsible for hydraulic modeling, flow monitoring, equipment selection, and obtaining necessary approvals from the Ministry of the Environment, Conservation and Parks. The contract will be awarded based on best value, evaluating factors such as experience, personnel quality, work plan credibility, and financial benefit. Key contractual requirements include a mandatory continuity of the Team Lead and a 5 percent holdback on monthly invoices until the as-constructed package is accepted. Technical requirements include SCADA integration in coordination with a nominated consultant and adherence to strict quality assurance programs. Financial estimates for the project range between 1.7 million and 5 million dollars, with specific budget allocations for subsurface utility engineering, topographic and geotechnical investigations, and hydrogeological studies.

Engineering Services

POSTED

DEADLINE

Building Architecture (Ancillary & Centralized)This subcontract involves providing architectural design services for support buildings on Municipality of Chatham-Kent facility projects. The scope of work includes the design of a centralized building featuring changing rooms, washrooms, a canteen, and concessions, as well as an ancillary building dedicated to mechanical rooms and equipment storage. All work must be completed using BIM/CAD software in strict accordance with applicable Building Codes and Zoning by-laws. The selected provider will be responsible for delivering comprehensive architectural floor plans, elevations, and detailed building specifications. This opportunity is categorized under NAICS code 541310, with a response deadline set for October 30, 2026.

Architectural Services

POSTED

DEADLINE

in about 17 hours

Electrical & Lighting DesignThis subcontract for Electrical and Lighting Design involves providing specialized electrical engineering services for the Municipality of Chatham-Kent. The selected provider will work with prime contractors to design electrical servicing and specialized sports lighting for various facility projects, including sports fields, parking lots, and pathways. All work must be performed in strict adherence to the Canadian Electrical Code (CEC), utilizing photometrics simulation software to ensure precision. The primary deliverables for this engagement include comprehensive electrical site plans, detailed lighting layouts, and accurate load calculations. Interested parties must submit their responses by October 30, 2026, as specified in the solicitation posted on October 13, 2026.

Engineering Services

POSTED

DEADLINE

in about 17 hours

Transportation & Traffic EngineeringThis subcontract for Transportation and Traffic Engineering involves providing traffic impact analysis and design services for road and intersection improvements on Municipality of Chatham-Kent facility projects. The scope of work includes the design of traffic signals at Communication Road and Allison Line, as well as the development of sidewalk extensions and auxiliary turning lanes utilizing traffic simulation software. All work must be performed in strict adherence to municipal and provincial traffic guidelines. The selected contractor is responsible for delivering comprehensive traffic signal plans, sidewalk layouts, and detailed intersection drawings. This opportunity is categorized under NAICS code 541330 and is associated with the Municipality of Chatham-Kent. Interested parties should note the response deadline of October 30, 2026.

Engineering Services

POSTED

DEADLINE

in about 17 hours

Municipal Water & Wastewater Design (Septic/Irrigation)This subcontract for the Municipality of Chatham-Kent involves providing specialized engineering design services for potable water, fire protection, and sanitary systems. The selected provider will work with prime contractors to develop water distribution plans, irrigation specifications, and dedicated on-site septic bed designs. All work must be performed using hydraulic calculation tools that adhere to the specific standards set by the local health unit and municipal guidelines. The project focuses on critical infrastructure components including potable water connections and fire protection services. Interested parties should note that the response deadline is October 30, 2026. This opportunity falls under NAICS code 541330, focusing on engineering services to support various facility projects within the municipality.

Engineering Services

POSTED

DEADLINE

in about 17 hours

Civil Site Engineering & Stormwater Management (SWM)This subcontract for Civil Site Engineering and Stormwater Management involves providing specialized civil engineering services for the Municipality of Chatham-Kent. The scope of work focuses on site grading, drainage, and environmental water management, specifically designing on-site stormwater management ponds and internal drainage swales to handle surface runoff and overland flow. All technical designs must be developed using hydrological modeling software in strict accordance with Ministry of Environment guidelines. The selected provider will be responsible for delivering comprehensive stormwater management plans, detailed grading plans, and specific drainage specifications to prime contractors. This opportunity is categorized under NAICS code 541330, with a response deadline set for October 30, 2026.

Engineering Services

POSTED

DEADLINE

in about 17 hours

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS