Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on April 4, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Large Vertical Array Production

Closed
N00024-25-R-6108Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334511
New
Federal
COMPUTER,FUEL MANAG
Solicitation # N0038327QAA08
Solicitation NO0383-27-Q-AA08, issued by NAVSUP Weapon Systems Support Philadelphia, is a requirement for the repair, testing, and inspection of the Computer, Fuel Manage (NIIN 015238319, P/N 512010-03-01). The scope of work requires the contractor to return assets to a Ready For Issue condition, specifically including the replacement of all seven transorbs on the internal Fuel Interface Card per Engineering Investigation WC2EI-H1Y-0002-21S. The contractor is responsible for providing all necessary tooling, fixtures, and materials, with a strict prohibition on the use of MIL-W-81381 wire in favor of SAE-AS22759 series wire. Performance is subject to a one-year induction period from the date of award, and the contractor must adhere to specific Repair Turnaround Times and report all transactions via the Commercial Asset Visibility system. The government intends to make a single award based on a best-value determination, prioritizing past performance over price. Technical requirements include compliance with ISO 9001 or SAE AS9100 quality standards and ANSI/NCSL Z540 or ISO-10012-1 calibration standards. Packaging must adhere to MIL-STD-2073-1 and ASTM D3951-18, with marking following MIL-STD-129. Administrative requirements include electronic invoicing through Wide Area Workflow and compliance with various FAR and DFARS clauses, including Buy American and cybersecurity reporting. The contractor is also required to manage Beyond Economical Repair and Missing on Induction determinations through DCMA and the Procuring Contracting Officer.
Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

in about 1 month

General Info

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Place of Performance

DC, USA

Set-Aside

NONE

Documents

1

N00024-25-R-6108 Terms of Use Agreement - GFI

PDF, High priority: read this firstspecial-notice
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

5 updates
PhaseClosed
Posted

Sources Sought

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

Response deadline changed from Feb 26, 2025 to Mar 12, 2025. The notice description changed.

Notice updated

Response deadline changed from Mar 12, 2025 to Apr 4, 2025. The notice description changed.

Notice updated

Response deadline changed from Apr 4, 2025 to Apr 18, 2025. The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsea Hq
Contacts2 people available
OfficeWASHINGTON NAVY YARD, DC, 20376-5000, USA
Office AddressWASHINGTON NAVY YARD, DC, 20376-5000, USA

Full Description

Show more
THIS IS A SOURCES SOUGHT NOTICE ONLY. THIS IS NOT A REQUEST FOR PROPOSALS. THE NAVY IS PUBLISHING THIS SOURCES SOUGHT NOTICE FOR MARKET RESEARCH PURPOSES ONLY. 02/06/25 1130 - Amended to include Terms of Use Agreement. 02/06/25 1445 - Amended to revise Terms of Use Agreement. The previous version is hereby null and void. Request all interest parties use revised form attached to this sources sought. 02/12/25 1100 - Amended to extend notice close date to 12 Mar 2025. 02/25/25 0745 - Amended to extend notice close date to 04 Apr 2025. 04/04/25 0830 - Amended to extend notice close date to 18 Apr 2025 In accordance with FAR 10 and 15.201, the Naval Sea Systems Command (NAVSEA) is issuing this sources sought announcement to support market research in anticipation of a potential future procurement. In this regard, NAVSEA seeks to obtain a list of potential interested and qualified sources with experience and expertise necessary to develop and produce a Large Vertical Array (LVA) for SONAR. Interested parties shall provide the below required information in a capability statement. Information regarding the content and format of responses is set forth below. The LVA will have application to the Ohio Class and Virginia Blocks III and IV submarine classes. The LVA shall consist of acoustic sensors, outboard electronic bottles (OBE), cables, and fixtures for manufacturing and installation to the submarine hull. The acoustic sensors will be arranged in the form of acoustic modules as documented in the specifications. Respondents shall describe their capability to produce large submarine hull-mounted arrays and describe their capability of sustaining a throughput of up to two LVA systems a year on this program. The materials utilized shall be capable of sustaining years long periods of submersion in salt water and withstand the harsh environments at varying ocean depths. Respondent systems shall be required to demonstrate the capability to be integrated and interoperable with the AN/BQQ-10(V) Sonar System installed on US Submarines. The outboard electronics will be predicated on an open-system architecture with no proprietary hardware or software included. The LVA outboard components shall meet the requirements of the performance specification, with a particular focus on ensuring arrays meet Grade B shock requirements. The performance specification documents will not be posted as an attachment to this sources sought notice. General system requirements are controlled documents and shall be available only to those companies with a validated security clearance at a minimum of CONFIDENTIAL clearance level and a signed Terms of Use (TOU) agreement, which is attached. To attain validation of clearance, prospective respondents must submit a written request to Matthew Nalls at matthew.a.nalls2.civ@us.navy.mil, and Stuart Burman at stuart.burman2.civ@us.navy.mil with the attached TOU completed and signed. The controlled documents may only be provided to prospective respondents following approval by the NAVSEA Office of Security Programs and the Contracting Officer; and after approval, the documents will be mailed to the respondents. The written request must include: Company Name and Address CAGE Code Point of Contact, Email, and Phone Level of Facility Clearance / Level of Storage Capability Facility Security Officer Name, Email, and Phone Classified Mailing Address Classified Mailing POC Name, Email, and Phone The below documents are not classified and will be distributed electronically to those sources with a valid CAGE code after validation of submitted TOU. At this time, national policy does not support release of the performance specification documents to foreign sources. Acoustic Panel Performance Specification OBE Performance Specification OBE to Network Interface Requirements Specification (IRS) / Interface Design Description OBE to Sensor Interface Requirements Specification (IRS) / Interface Design Description Outboard Cable Assemblies Specification Cable, Hybrid, Submarine Outboard Specification Conformal Acoustic Velocity SONAR (CAVES) Sensor Performance Specification Respondents shall provide information addressing the following areas: 1) Sensor and Array Performance and Survivability of the acoustic sensor a. Provide a detailed technical approach to ensure the LVA will meet all requirements after installation b. Provide technical details supporting the sensor specifications addressing the acoustic performance, EMI requirements, reliability, and maintainability 2) Provide the overall technical approach to interface the LVA with existing OHIO Class and VIRGINIA Block III and planned Block IV platforms and subsystems a. Provide overall technical approach to interface the OBE with the AN/BQQ-10 system and the acoustic sensor b. Provide an overall technical approach to address space, weight and power requirements 3) Maintainability is addressed in each respective system performance specification. a. Provide the overall technical approach to demonstrate below the waterline system survivability of a 25 year service life for OHIO Class and VIRGINIA Block III and Block IV, inclusive of periodic inspection and repair of the pressure hull b. Provide the overall technical approach to demonstrate OBE survivability of a 25 year service life for OHIO Class and VIRGINIA Block III and Block IV c. Provide the overall technical approach to the accessibility and ability to replace OBEs and outboard cables on the OHIO Class and VIRGINIA Class Block III and Block IV by intermediate maintenance activities d. Provide the overall technical approach to demonstrate the ability to replace, at a minimum, a single array stave 4) Development and Fabrication Schedule a. Provide an estimated schedule for the design/development of production and installation fixtures b. Provide an estimated time necessary to finalize a Production Baseline c. Provide an estimated schedule for production of the LVA. Discuss any qualifications and testing unique to the LVA that must be completed in order to successfully deliver the array. 5) Provide a Rough Order of Magnitude Cost (ROM) itemized by the below categories. Provide additional details and cost/production assumptions, as necessary. a. Material Quantities and Cost of an OHIO Class LVA b. Labor Quantities and Cost of an OHIO Class LVA c. Material Quantities and Cost of a VIRGINIA Class LVA d. Labor Quantities and Cost of a VIRGINIA Class LVA e. Cost of any research, development, design, qualifications and testing unique to the LVA that must be completed in order to successfully deliver the array. 6) If significant subcontracting or teaming is anticipated to execute the requirement, briefly address the administrative and management structure of such arrangements. Significant subcontracting is identified as any vendor that will complete more than 20% of a LVA effort (i.e., production, qualification, testing) or a vendor that provides more than 20% of material for a LVA effort. Provide the percent of work planned to be completed by the vendor(s) other than the prime contractor and identify the estimated amount and the estimated cost of the labor and material associated with each subcontracted vendor. 7) Describe barriers to competition that may preclude potential sources from participating in a competition to develop and produce LVAs. Sources may make suggestions as to how the Government might alleviate the identified barriers to competition. 8) Provide relevant past performance references, descriptions, and contract number(s) for performance within the last ten (10) years in the design or production of systems similar in scope and complexity to the LVA. For those respondents who have CPARS ratings, within the past 10 years, which relate to work relevant to that of this notice, provide the associated CPARS evaluation(s). Interested sources shall provide unclassified company literature and/or provide a capability summary not to exceed 25 pages in length of 12-point, Times New Roman font addressing the topics described above. Responses should include the following information: Organization name, DUNS code, CAGE code, point of contact, address, email address, website address, telephone number, workforce size and type of ownership for the organization. Respondents shall submit their information via DoD SAFE to Matthew Nalls. Telephonic responses are not acceptable. Contracting Office Address: SEA 02 1333 Isaac Hull Avenue SE Washington Navy Yard, District of Columbia 20376 United States Primary Point of Contact.: Matthew Nalls, Contract Specialist matthew.a.nalls2.civ@us.navy.mil Phone: 202-271-6197 Secondary Point of Contact: Stuart Burman, Contracting Officer Stuart.burman2.civ@us.navy.mil Phone: 202-714-7059 Important notice: The Government may not respond to any specific questions or comments submitted in response to this sources sought notice or information provided as a result of this sources sought notice. Any information submitted by respondents as a result of this sources sought notice is strictly voluntary. This sources sought notice is for information planning purposes and the Government will not pay or otherwise reimburse respondents for any questions submitted or information provided as a result of this announcement. All documentation shall become the property of the Government. The Government is not soliciting, nor will it accept proposals as a result of this sources sought notice. This sources sought notice is a market research tool being used to determine the existence of qualified experienced sources. All firms responding to this sources sought notice are advised that their response to this notice is not a request to be considered for a contract award. If a solicitation is issued, it will be announced later via solicitation module within the Procurement Integrated Enterprise Environment (PIEE) located at https://piee.eb.mil/, which will be cross-posted to the System of Award Management (SAM) webpage located at http://www.sam.gov. All interested parties must respond to that solicitation announcement separately from the response to this sources sought notice. Response to this notice is not a request to be added to a bidders list or to receive a copy of a solicitation. This announcement is not a contract, request for proposal, a promise to contract, or a commitment of any kind on the part of the Government. THE GOVERNMENT DOES NOT INTEND TO AWARD A CONTRACT ON THE BASIS OF THIS SOURCES SOUGHT NOTICE. Mailing Address: COMMANDER NAVAL SEA SYSTEMS COMMAND ATTN: MATTHEW NALLS / SEA 02614 1333 ISAAC HULL AVENUE SE STOP 2050 WASHINGTON NAVY YARD, DC 20376-2050

More opportunities from Department Of Defense → Navsea Hq

Same awarding agency

NAICS: 334511
New
Federal
AN/BYG-1 Applications Re-Architecture
Solicitation # N0002426R6222
Solicitation N0002426R6222, issued by the Naval Sea Systems Command (Navsea HQ), seeks a contractor for the AN/BYG-1 Applications Re-Architecture. This effort involves the re-architecting of applications associated with the AN/BYG-1 system. The solicitation was posted on October 7, 2026, with a response deadline of November 5, 2026. The primary point of contact for the effort is Michael Ravnitzky, with Matthew C. Hedrick serving as the Contracting Officer. Due to the sensitive nature of the work, strict security and data handling requirements are in place. Offerors must possess a SECRET security clearance and provide a verified DD Form 2345 Military Critical Technical Data Agreement and a signed Terms of Use Agreement to access Government Furnished Information, source code, and technical documents. All data must be handled in accordance with NISPOM standards, and the transmission of information to foreign nationals or outside the United States is prohibited without a valid export license. Furthermore, the use of public cloud repositories or external AI tools for processing technical data is strictly forbidden. Contractors are required to destroy all provided data within 180 days of the RFP closing and maintain destruction records for five years.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 16 days
View Details
NAICS: 334511
New
Federal
Navy Electronic Chart Display and Information System (ECDIS) Hardware and Software Production
Solicitation # N00025-26-R-5246
The U.S. Navy, through the Portfolio Acquisition Executive Mission Systems and Program Manager Warfighting / Applications (PMW/A 520), is soliciting proposals for the development, production, integration, testing, fielding, and lifecycle sustainment of the Electronic Chart Display and Information System (ECDIS) hardware and software. This full and open competition supports both surface and subsurface platforms, specifically focusing on the manufacture and assembly of AN/SYN-1 and Scalable IBS (S-IBS) hardware, alongside the maintenance and modification of software using Government Furnished Information. The contract is structured with one base year and four one-year option periods beginning in FY27, with award anticipated in Q4 FY27. The procurement utilizes a best-value tradeoff process, prioritizing technical approach and management approach over total evaluated cost and price, while past performance is rated on an acceptable or unacceptable basis. Hardware deliverables are priced via a stepladder structure, while software and hardware engineering support are provided as cost-plus-fixed-fee level-of-effort tasks. Key requirements include a Secret facility and personnel clearance, compliance with ANSI/ASQ/ISO9001:2015 quality standards, and strict adherence to cybersecurity and CUI protection frameworks. Deliveries are generally FOB Destination, with specific timelines ranging from 60 days to 18 months after award or option exercise.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 3 months
View Details
NAICS: 336611
New
Federal
USS MAKIN ISLAND (LHD 8) FY28 Docking Selected Restricted Availability (DSRA) Request for Proposal(s)
Solicitation # N0002426R4421
The Naval Sea Systems Command (NAVSEA) is soliciting proposals for the USS MAKIN ISLAND (LHD 8) Fiscal Year 2028 Docking Selected Restricted Availability (DSRA). This Signature Availability is a comprehensive effort combining maintenance, modernization, and repair, requiring a contractor with substantial West Coast facilities, including a capable pier and dry-dock. The scope of work is extensive, with estimated man-days of approximately 284,631 for maintenance and 38,416 for modernization, covering areas such as hull structure, propulsion and electric plants, auxiliary systems, and structural welding. The government anticipates making a single Firm Fixed-Price award in or before March 2027, with performance beginning in November 2027 and an expected completion date of October 30, 2029. The procurement is not set aside for small businesses due to the complexity and magnitude of the requirements. Proposals will be evaluated based on Best Value using trade-off procedures, focusing on technical eligibility, physical resource capacity, past performance, manpower, small business participation, and the proposed schedule and execution approach. Key deliverables include an integrated production schedule and an initial duration analysis due 60 days post-award. The contract includes specific provisions for growth work, including an estimated 211,989 direct labor hours and over 9.5 million dollars in materials, as well as a Small Dollar Value Growth incentive program. Offerors must be registered in the System for Award Management and submit proposals via the PIEE Solicitation Module by November 9, 2026.
Ship Building and Repairing

POSTED

5 days ago

DEADLINE

in 20 days
View Details
NAICS: 333415
Federal
Shipboard Air Conditioning Plant System Sustainment Plan (SSP)
Solicitation # N0002427R4452
Navsea HQ is conducting market research under solicitation N0002427R4452 to identify capable sources for the Shipboard Air Conditioning Plant System Sustainment Plan (SSP). This initiative aims to standardize and scale the sustainment of centrifugal, reciprocating, and rotary air conditioning plants for U.S. Navy surface ships worldwide. The government is evaluating various acquisition strategies, including a single-award Indefinite Delivery, Indefinite Quantity (IDIQ) contract or multiple-source arrangements, to improve materiel condition and operational availability across diverse ship classes and geographic locations. The contemplated scope of work encompasses six primary capability areas: executing Major AC Plant Pit Stops and overseeing Minor Pit Stops, both of which must be completed within a mandatory six-week window; providing embedded AC&R technical expertise at Shore Intermediate Maintenance Activities (SIMAs) for Sailor training and oversight; supplying OEM AC plant materiel and repair parts; managing a global warehouse and rotable pool for Overhaul Parts Packages (OPPs); providing configuration-specific engineering, technical data, and integrated product support; and delivering global unplanned and emergent field services. Interested respondents must submit a response by October 28, 2026, including a completed Capability Certification Matrix and supporting evidence of their ability to perform these requirements organically or through teaming arrangements.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

7 days ago

DEADLINE

in 8 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS