Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

LED Component Manufacturing and Supply

Active

Federal

Response Deadline08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the full lifecycle production and delivery of a single light emitting diode unit identified by NSN 5980-01-608-7031, encompassing all phases from raw material sourcing and fabrication to rigorous quality control, final packaging, and shipment to a designated U.S. government location. This is a subcontract under the Department of Defense’s Maritime Supply Chain, with performance required at a facility in Talladega, Alabama, and the work must comply with all applicable defense production standards and specifications. The solicitation was posted on July 30, 2026, with responses due by August 13, 2026, and is categorized under NAICS code 334413 for semiconductor and other electronic component manufacturing. While no set-aside type or point of contact is specified, the requirement is strictly for a single unit, indicating a highly specialized application likely tied to critical defense systems. All deliverables must meet exacting U.S. government quality and traceability requirements, and the vendor is responsible for end-to-end accountability including documentation, compliance, and on-time delivery to the specified ZIP code area in Talladega.

General Info

Produce and deliver one NSN 5980-01-608-7031 LED unit per DoD specs to Talladega, Alabama by August 13, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334413 - Semiconductor and Related Device ManufacturingView NAICS

Place of Performance

TALLADEGA, AL, 35160-3608, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Full lifecycle production and delivery of one unit of a light emitting diode (LED) under NSN 5980-01-608-7031, including sourcing raw materials, fabrication, quality control, packaging, and shipment to a U.S. government destination.

Similar Contracts

Same NAICS industry code

High-Reliability Transistor Manufacturing and TestingThe contract requires the manufacture, testing, and delivery of 199 units of JANTX2N6287 military-specification transistors, with strict adherence to defense-grade reliability standards. Each unit must undergo comprehensive Product Verification Testing to ensure performance under extreme conditions, alongside robust ESD and EMI protection measures to safeguard functionality in sensitive operational environments. Full traceability is mandated throughout the production lifecycle, from raw materials to final assembly, ensuring accountability and compliance with military procurement protocols. The transistors are to be delivered to Hill AFB, Utah, with the contract structured as a subcontract under the Department of Defense’s Maritime Supply Chain initiative. The NAICS code 334413 confirms the scope falls under semiconductor and related device manufacturing. Bids must be submitted by August 14, 2026, following the solicitation posted on July 31, 2026, with all work required to meet the high-reliability specifications defined by military standards.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-26-Q-1321

This contract specifies the procurement of a JANTX2N6287 transistor under Federal Supply Class 5961, with a quantity of 199 units to be delivered within 171 days after award. The item is classified as a commercial item and a critical application component, subject to stringent quality and traceability requirements. It must be manufactured by a qualified entity listed on the Qualified Manufacturers List or Qualified Products List, and all suppliers must comply with DLA’s Qualified Suppliers List and Qualified Testing Suppliers List for semiconductors. Traceability documentation must be maintained per DLA Procurement Note C03, and the product must conform to MIL-PRF-19500/505F and MIL-PRF-19500R specifications. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for specific functional applications as defined by NAVSEA. All packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including ESD and EMI protection per MIL-PRF-81705, with barrier materials sourced exclusively from qualified manufacturers listed on QPL-81705. Components require ESD and physical protection to prevent damage to leads and terminals, with specific packaging codes and cushioning standards enforced. Each unit package must be marked in accordance with IPC/JEDEC J-STD-609 to indicate lead content and other attributes, and all labeling must comply with MIL-STD-129, including the special marking code ZZ for ESD sensitivity. The item is to be delivered FOB origin to the DLA Distribution Depot at Hill AFB, Utah, with firm fixed pricing and zero quantity variance permitted. Inspection and acceptance occur at the destination, and the contract mandates full compliance with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

DISPLAY, OPTOELECTRONIC

Solicitation # SPE7M5-26-U-0052

This solicitation, issued under number SPE7M5-26-U-0052 by the Defense Logistics Agency's Land and Maritime Active Devices Division, is for 401 units of a critical application display optoelectronic item identified by NSN 5980014788549 and specific part numbers from Pacific Consolidated Industries and Advanced Micro Instruments. The contract is structured as an indefinite delivery contract below the simplified acquisition threshold, with a one-year period of performance and a guaranteed minimum of 60 units per order, requiring a minimum delivery order quantity of 100 units. Pricing is set at $401.00 per unit, with an estimated total contract value of $350,000. Delivery is required 112 days after order placement under FOB Origin terms, though the item is designated for destination inspection and acceptance. The item must be manufactured in accordance with limited rights data, which the Government will not provide, restricting eligible vendors to those with direct access to the proprietary specifications. Strict environmental controls prohibit the intentional use of mercury or mercurial compounds except in specific functional applications such as batteries, sensors, or instruments per NAVSEA 5100-003D, and any portable mercury-containing devices must feature shockproof design with a secondary containment boundary. The use of Class I ozone-depleting substances in any phase of production is strictly forbidden absent written approval from the Contracting Officer. Packaging and handling are subject to rigorous federal standards to ensure product integrity and compliance with environmental and security protocols. All items must be packaged per MIL-STD-2073-1E using specific codes for preservation, wrapping, cushioning, and containerization, including the use of K3 wrapping material and NB cushioning with a minimum thickness rating of A. Critical ESD and EMI protection is mandatory, requiring the use of qualified DOD-approved materials per MIL-PRF-81705 Type I barrier material for both ESD and EMI defense, with Type III wrap required if cushioning is not otherwise specified. Suppliers must confirm all packaging materials are sourced from manufacturers listed on the QPL-81705 registry. Special marking code 39-39 must be applied per MIL-STD-129 to indicate the item’s ESD-sensitive nature, and palletization must adhere to DLA packaging requirements RP001. Hazardous materials, if any, require labeling compliant

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Perovskite Solar Cell Sample FabricationThe contract calls for the fabrication of perovskite solar cell samples designed to be flight-ready and compatible with ground-control operations, specifically engineered to withstand the extreme conditions of the space environment for testing on the International Space Station through the MISSE platform. These solar cells must demonstrate durability under prolonged exposure to vacuum, radiation, thermal cycling, and atomic oxygen, ensuring reliable performance in low Earth orbit. The work requires precise material processing, encapsulation techniques, and rigorous pre-flight qualification to meet NASA's standards for space hardware. The solicitation is issued as a subcontract under NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with a NAICS code of 334413 indicating specialized manufacturing in photovoltaic solar cell production. Interested parties must submit responses by the deadline of August 4, 2026, with the opportunity posted on July 31, 2026. The performance location is not specified beyond the broader context of ISS deployment via MISSE, and no set-aside provisions or point of contact details are provided. The project aims to advance space-based solar energy technologies through the evaluation of next-generation perovskite materials under actual orbital conditions.

NASA Shared Services Center

POSTED

DEADLINE

NIST NB686090-26-01960 Nitrogen RF Plasma Source

Solicitation # NIST_NB686090-26-01960_Nitrogen_RF_Plasma_Source

The contract solicitation titled NIST NB686090-26-01960 Nitrogen RF Plasma Source is issued by the National Institute of Standards and Technology under the U.S. Department of Commerce, with the solicitation number NIST_NB686090-26-01960_Nitrogen_RF_Plasma_Source. It was posted on July 31, 2026, and responses are due by August 12, 2026, at 11:00 PM Eastern Time. This is a combined solicitation with no set-aside designation, meaning all eligible businesses may compete. The NAICS code 334413 identifies the industry as Semiconductor and Related Device Manufacturing. The performing work is expected to take place in Colorado, 80305, while the contracting office is located in Gaithersburg, Maryland, 20899. The primary point of contact for inquiries is Matthew Delgado, reachable via email at matthew.delgado@nist.gov. Further details and documentation are available through the provided SAM.gov link.

Department Of Commerce Nist

POSTED

DEADLINE

Semiconductor Rectifier Manufacturing and SupplyThe contract is for the manufacture and supply of a military-spec semiconductor rectifier device identified by NSN 5961-01-099-2517, designed to meet the stringent requirements of MIL-DTL-19491 and associated technical standards. The item is a critical electronic component intended for defense applications, requiring high reliability, environmental resilience, and precise electrical performance under adverse conditions. The procurement is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, to foster industry participation from qualified smaller manufacturers. The solicitation was posted on July 30, 2026, with a firm response deadline of August 10, 2026, and is managed by the Active Devices Division within the Department of Defense. Performance is to be delivered to the specified location in New Cumberland, Pennsylvania, with the NAICS code 334413 indicating the industry classification for semiconductor and related device manufacturing. The contract is solicited through the DIBBS system, and while no point of contact is listed, all submissions must align with the technical and regulatory obligations of the military specification and the small business set-aside requirements to be considered eligible.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

LED Component Supply (Commercial Off-the-Shelf)The contract calls for the supply of three units of the DIALIGHT LED part number 556-1304-304, identified by the National Stock Number 5980-01-496-4133, specifically for integration into defense systems. The components must be provided as Commercial Off-the-Shelf items while adhering strictly to all applicable military technical standards and ensuring complete traceability throughout the supply chain to guarantee authenticity, performance, and reliability in mission-critical environments. The delivery is to be made to the designated place of performance in Dahlgren, Virginia, with a zip code of 22448-5000, under the oversight of the Department of Defense’s Active Devices Division. The solicitation, posted on July 30, 2026, mandates responses be submitted by August 10, 2026, and is structured as a subcontract under NAICS code 334413, which pertains to the manufacturing of electronic components. Although no set-aside designation or point of contact details are specified, the contract is accessible through the DIBBS platform for authorized participants. All suppliers must be prepared to meet the stringent quality and documentation requirements inherent to defense procurement, with no exceptions allowed for non-compliant or untraceable components.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Qualified Linear Microcircuit (NSN: 5962012623919)The contract requires the supply and delivery of 155 units of a qualified linear microcircuit identified by NSN 5962012623919, meeting stringent military and federal specifications. All units must be sourced exclusively from suppliers listed on the Qualified Manufacturer List or Qualified Supplier List for Linear Devices to ensure compliance with performance and reliability standards. Each component must adhere to strict packaging, marking, and traceability protocols, including full lot traceability and proper documentation to support military-grade quality assurance. The items are destined for performance at a location in Columbus, Ohio, with delivery expected to meet defined contractual timelines. This is a subcontract issued under the NAICS code 334413 for Semiconductor and Related Device Manufacturing, managed by the Department of Defense’s Nuclear Reactor Program. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026. While the specific contracting office details and point of contact are not provided, the transaction is facilitated through the DLA Troop Support procurement system via the given UI link. No set-aside classification is indicated, suggesting the opportunity is open to all qualified subcontractors regardless of business size or status.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Precision Electronic Connector ManufacturingThe contract involves the manufacture and delivery of seven units of a CONNECTOR, RECEPTACLE with National Stock Number 5935016898713, strictly adhering to the Department of Defense’s technical standards RQ002, RQ011, and RQ017. This subcontract is under the Precision Electronic Connector Manufacturing initiative, with performance required at Tracy, California, 95304-5000. All work must comply with the technical and quality specifications defined by the Defense Logistics Agency to ensure compatibility and reliability in military applications. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and the North American Industry Classification System code for the work is 334413. The contracting activity is managed by the Active Devices Division under the Department of Defense, and the primary point of reference for the solicitation is available through the DIBBS portal.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Electronic Component Manufacturing – NSN 0001S00000052The contract requires the manufacture and delivery of four units of a specialized electronic component identified by NSN 0001S00000052, with strict adherence to Defense Logistics Agency technical specifications, packaging requirements, labeling standards, and U.S. export control regulations. All components must be produced to meet the exacting quality and compliance benchmarks established by the Department of Defense. The place of performance is designated as New Cumberland, Pennsylvania, with the contract issued under the NAICS code 334413, indicating it pertains to electronic component manufacturing. The subcontract opportunity was posted on July 30, 2026, withresponses due by August 7, 2026, and is managed by the ASC Supplier Operations OEM Division under the broader umbrella of the Department of Defense.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Optoelectronic Coupler Supply (P/N 2966650)The contract calls for the supply of 113 units of a commercial off-the-shelf optoelectronic coupler with part number 2966650 and NSN 5980-12-375-8396, sourced from Phoenix Contact, ensuring full compliance with Department of Defense quality and technical standards. The item is classified under NAICS code 334413, indicating it falls within the electronic component manufacturing sector, and the procurement is structured as a subcontract under the Maritime Supply Chain organization of the Department of Defense. All delivered units must meet stringent military specifications and be certified for use in defense applications. Performance of this contract is required at the location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 30, 2026, and all proposals must be submitted by August 13, 2026, to be considered. The contract is administered through the DLA DIBBS system, and the specific identification number for the request is SPE7M126Q1313. Although no point of contact or set-aside designation is provided, the procurement is targeted toward meeting urgent defense readiness needs with a standardized, pre-qualified component.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Qualified Semiconductor Device Supply (QML/QPL-Certified Diode Manufacturing)The contract entails the supply of 155 units of JANTX1N5807 military-grade diodes, fully certified under QML per MIL-PRF-19500/477N and MIL-PRF-19500R standards, ensuring compliance with stringent defense electronics requirements. Each unit must be manufactured with full traceability from raw materials through final assembly, adhering to the rigorous quality and reliability benchmarks mandated for critical military and aerospace applications. The diodes are intended for use in high-reliability systems under the Nuclear Reactor Program, a component of the Department of Defense, and must meet all performance, environmental, and documentation specifications outlined in the referenced military specifications. The solicitation is structured as a subcontract with a response deadline of August 10, 2026, and was posted on July 30, 2026, under NAICS code 334413 for semiconductor and related device manufacturing. Performance of the contract will be carried out at Robins AFB, Georgia, with a zip code of 31098-1887. All delivered components must be qualified and listed on the Qualified Manufacturers List, with documentation attesting to traceability, testing, and conformance to applicable defense standards. The procurement is part of a broader effort to maintain inventory integrity and ensure component authenticity for mission-critical defense systems.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

Quality Assurance & Inspection SupportThe contract requires independent quality inspection and sampling activities conducted in accordance with MIL-STD-1916 or ASQ H1331 standards to ensure zero-defect acceptance of goods prior to delivery. The work is intended to support government inspection efforts at the destination and must guarantee that all products meet stringent quality thresholds without defects. The performance location is Jacksonville, Florida, with the zip code 32212-0103, and the contract is classified as a subcontract under NAICS code 541380, indicating it falls within the scientific and technical consulting services category. The solicitation was posted on July 31, 2026, with a deadline for responses set for August 5, 2026, and is managed by the Maritime Supply Chain under the Department of Defense, emphasizing its alignment with military logistics and supply chain integrity requirements.

Testing Laboratories and Services

POSTED

DEADLINE

Packaging and Marking Services (Non-Hazardous)The contract calls for the design, production, and application of durable labels and packaging materials for the shipment and storage of non-hazardous items, fully compliant with MIL-STD-129 standards. This includes accurate marking of National Stock Numbers and proper unit-of-issue identification to ensure traceability and regulatory adherence throughout the defense logistics chain. The work must meet stringent military specifications for durability, legibility, and environmental resilience under storage and transit conditions. Performance is required at Jacksonville, Florida, with a response deadline of August 5, 2026, and the solicitation is classified as a subcontract under NAICS code 323111, which pertains to printing and related support activities. The contracting entity is the Maritime Supply Chain under the Department of Defense, indicating this effort supports naval or maritime logistics operations. All deliverables must be finalized and delivered in alignment with federal procurement protocols and quality assurance requirements for defense-grade packaging and labeling systems.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the preparation and submission of hazard warning labels and material safety data sheets for hazardous materials used in production or packaging, ensuring full compliance with 29 CFR 1910.1200 and MIL-STD-129 standards. All deliverables must accurately reflect the chemical composition, hazards, handling procedures, and emergency measures associated with each material, with labels designed to meet federal and military specifications for visibility, durability, and information clarity. The work is scoped to support defense-related production activities and must be completed in alignment with the specified regulatory frameworks to ensure workplace safety and operational readiness. This subcontract is issued under the NAICS code 541690 and is associated with the Department of Defense through the Maritime Supply Chain organization. The place of performance is located in Jacksonville, Florida, with the required responses due by August 5, 2026. The solicitation was posted on July 31, 2026, and all submissions must be finalized before the deadline. While the contracting office details are not fully specified, the performance location and regulatory requirements indicate strict adherence to defense logistics protocols and hazardous materials management standards.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Manufacture of Fault-Locating Indicator (MIL-PRF-83287/01-16)The contract specifies the full manufacturing of 18 units of a fault-locating indicator meeting the stringent requirements of MIL-PRF-83287G Revision G and the associated QPL/QML standards, ensuring compliance with Department of Defense military performance specifications. The scope encompasses end-to-end production including all necessary testing, packaging, and delivery under FOB origin terms, placing responsibility on the contractor for meeting quality and readiness benchmarks prior to shipment. All units must satisfy rigorous defense-grade reliability and functional criteria to be accepted under the established qualification listings. The solicitation, issued under the NAICS code 334514 for other electronic component manufacturing, is classified as a subcontract with a response deadline of August 5, 2026, and was posted on July 31, 2026. Performance is required to be fulfilled at the designated location in Jacksonville, Florida, with the contracting entity operating under the Maritime Supply Chain division of the Department of Defense. While no set-aside status or point of contact details are provided, the contract demands full adherence to federal defense procurement protocols and delivery standards applicable to critical military electronic components.

Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

DEADLINE

Domestic and International Transportation of Defense Aerospace SuppliesThe contract pertains to the domestic and international transportation of finished aerospace components, requiring full compliance with DLA freight protocols and DFARS sea transport reporting standards. All shipments must adhere to strict defense supply chain regulations, ensuring secure, timely, and auditable movement of sensitive aerospace materials under the jurisdiction of the Department of Defense. The place of performance is designated as Hill AFB with a zip code of 84056-5734, indicating the primary operational base for logistics coordination, while the work spans both land and sea routes across global jurisdictions. The solicitation is classified as a subcontract under NAICS code 484121, which corresponds to truck transportation for special purposes, implying an emphasis on specialized handling of defense-related cargo. The opportunity was posted on July 31, 2026, with responses due by August 5, 2026, providing a narrow five-day window for interested parties to submit proposals. The contracting agency is MARITIME SUPPLY CHAIN under the Department of Defense, indicating a focus on integrating maritime logistics into the broader defense aerospace supply network. Compliance with sea transport reporting requirements under DFARS is mandatory, necessitating robust documentation and tracking capabilities from all subcontractors.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Hazardous Materials Compliance and Safety Data Sheet (SDS) ManagementThe contract requires the identification of hazardous materials within brake assemblies, particularly focusing on the presence of hexavalent chromium, which is strictly prohibited under DFARS regulations. The contractor must prepare accurate and compliant Safety Data Sheets (SDS) in accordance with OSHA’s Hazard Communication Standard, ensuring all chemical hazards are properly documented, labeled, and communicated to end users. Compliance with both federal occupational safety standards and defense acquisition regulations is mandatory, with special attention to eliminating restricted substances and maintaining full traceability of materials throughout the supply chain. The work is to be performed at Hill AFB, Utah, 84056-5734, and falls under NAICS code 541620 for environmental consulting services. This is a subcontract opportunity with a response deadline of August 5, 2026, and was posted on July 31, 2026. The contracting entity is under the Department of Defense through the Maritime Supply Chain, and all deliverables must align with DoD-specific compliance requirements to ensure the brake assemblies meet military-grade safety and environmental standards. Failure to identify or properly document hazardous constituents could result in non-compliance and disqualification.

Environmental Consulting Services

POSTED

DEADLINE

Specialized Packaging and Preservation Services for Military Aerospace PartsThe contract requires specialized packaging, preservation, and labeling of aerospace components to meet military standards, ensuring all parts undergo rigorous cleaning, protective wrapping, and containerization in compliance with DLA and MIL-STD guidelines. This work is critical for maintaining the integrity, functionality, and longevity of sensitive aerospace hardware during storage and transit under demanding environmental conditions. All processes must adhere strictly to established defense protocols to guarantee readiness and reliability for military operations. Performances are designated to occur at Hill Air Force Base, Utah, with a response deadline of August 5, 2026, and the solicitation posted on July 31, 2026. The contract falls under the NAICS code 493190, categorizing it as a subcontract within the warehousing and storage sector, and is managed by the Department of Defense through its Maritime Supply Chain organization. Compliance with all technical specifications, documentation standards, and packaging requirements is mandatory, with failure to meet these criteria considered a material breach of contractual obligations.

Other Warehousing and Storage

POSTED

DEADLINE

Precision Aerospace Machining of Landing Gear ComponentsThe contract entails the precision manufacture and CNC machining of disc brake and lining assemblies specifically for the C-5A aircraft landing gear, adhering strictly to established military specifications and detailed engineering drawings. The work must meet rigorous aerospace standards to ensure mission-critical performance and safety, with all components produced to exact tolerances and subjected to required quality controls inherent in defense-grade manufacturing. This is a subcontract opportunity under the NAICS code 336412, which classifies it within the Aircraft Parts and Auxiliary Equipment Manufacturing sector. Performance of the contracted work is designated for Hill Air Force Base, Utah, with a response deadline of August 5, 2026, and the solicitation was posted on July 31, 2026. The contracting entity operates under the Department of Defense through the Maritime Supply Chain organization, indicating alignment with broader defense logistics and procurement goals. All materials, processes, and deliverables must comply with federal defense requirements, and suppliers are expected to demonstrate proven capability in high-stakes aerospace machining, with an emphasis on traceability, documentation, and adherence to technical directives without deviation.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

QSLD-Compliant Component SourcingThe contract requires the sourcing and supply of authentic JANTX2N6287 transistors exclusively from suppliers listed under QML and QSLD standards, ensuring adherence to stringent military-grade component integrity requirements. Full chain of custody must be maintained throughout procurement, handling, and delivery to guarantee traceability and prevent the introduction of counterfeit parts. All activities must comply with established anti-counterfeit protocols mandated for defense applications, with documentation supporting every stage of the supply chain. Performance is designated for Hill Air Force Base, with the contract operating under the NAICS code 423490 and issued as a subcontract by the Department of Defense through the Maritime Supply Chain organization. The solicitation was posted on July 31, 2026, and responses are due by August 14, 2026, with the goal of securing qualified sources capable of delivering mission-critical components that meet exacting aerospace and defense specifications.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Supply Chain Traceability Documentation and ComplianceThe contract requires the successful bidder to maintain and deliver comprehensive supply chain traceability documentation in strict compliance with DFARS 252.204-7020 and DLAD C03 regulations, ensuring full audit readiness and accurate reporting through the Wide Area Workflow system. This subcontract mandates end-to-end visibility of parts and materials throughout the supply chain, including source verification, component origins, and manufacturing pathways, to meet Department of Defense requirements for defense-related acquisitions. Performance is designated at Hill AFB, Utah, with a closing date for responses set for August 14, 2026, and the work falls under NAICS code 541611 for management consulting services supporting defense logistics operations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Military-Compliant Marking and Labeling ServicesThe contract requires the application of MIL-STD-129 compliant markings and labeling on military-grade items, ensuring full adherence to Department of Defense standards for identification and traceability. Specific requirements include the inclusion of ESD-sensitive indicators coded as ZZ and accurate identification of lead finishes according to J-STD-609, which governs solderability and surface finish specifications for electronic components. All labeling must be durable, clear, and conform precisely to the prescribed military formatting to ensure compatibility with logistics and inventory systems throughout the supply chain. The work is a subcontract under the Maritime Supply Chain division of the Department of Defense, with performance required at Hill AFB, Utah, in the zip code 84056-5734. The opportunity was posted on July 31, 2026, and bids must be submitted by August 14, 2026. The NAICS code 811411 indicates this pertains to commercial and industrial machinery and equipment repair and maintenance services, though the focus here is strictly on labeling and marking compliance. All work must meet exacting defense standards without exception to ensure seamless integration into military logistics and handling procedures.

Home and Garden Equipment Repair and Maintenance

POSTED

DEADLINE

ESD/EMI-Compliant Packaging and Preservation ServicesThe contract requires the provision of packaging services that fully comply with MIL-STD-2073-1E standards to safeguard sensitive electronic components from electrostatic discharge and electromagnetic interference during transit. All packaging materials must be sourced from the Qualified Products List QPL-81705 to ensure compatibility and performance under strict military environmental and handling conditions. The scope includes not only the selection and assembly of compliant packaging but also the preservation techniques necessary to maintain component integrity from preparation through shipment. Work must be performed to meet rigorous DoD quality expectations with a focus on ESD/EMI protection throughout the logistics chain. The contract is issued as a subcontract under the NAICS code 322291 and is managed by the Maritime Supply Chain under the Department of Defense. Performance is required at Hill AFB, Utah, with a specific zip code of 84056-5734. The solicitation was posted on July 31, 2026, and all offers must be submitted by August 14, 2026. Contractors must demonstrate proven experience in military-grade packaging, adherence to approved material lists, and the ability to deliver fully compliant solutions within the specified timeframe. All submissions must align with the detailed requirements outlined in the referenced DIBBS solicitation.

Sanitary Paper Product Manufacturing

POSTED

DEADLINE