Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

LEEC Sectional Body Store Supplier and Installer

Active

International

Response Deadline11/25/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract agreement involves the supply and installation of a standalone LEEC sectional body store and a modular mortuary unit for prime contractors working on projects for the Betsi Cadwaladr University Health Board. The scope of work encompasses the provisioning of the sectional body store, the erection of the modular unit, and full commissioning to ensure the facility is completely operational and ready for use. The procurement process for this project began on October 26, 2026, with a response deadline set for November 25, 2026. Classified under NAICS code 332311, the contract focuses on delivering a fully commissioned, standalone modular mortuary solution to meet the specific healthcare infrastructure needs of the health board.

General Info

Supply, installation, and commissioning of a modular mortuary for Betsi Cadwaladr Health Board.

Agency

Betsi Cadwaladr University Health Board

NAICS

332311 - Prefabricated Metal Building and Component Manufacturing

Place of Performance

GBR

Set-Aside

NONE

Documents

This scope was carved out of ocds-h6vhtk-07906d.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BCU-ITT-64411 - YGC Drop Down Mortuary

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 26

subcontract

Response DeadlineNov 25

Submission deadline

Response Deadline

11/25/2026, 12:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyBetsi Cadwaladr University Health Board

ContactsNo contacts available

OfficeN/A

Organization / AgencyBetsi Cadwaladr University Health Board

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and installs a standalone LEEC sectional body store and modular mortuary unit for prime contractors on Betsi Cadwaladr University Health Board projects. Provisions the sectional body store, erects the modular unit, and performs commissioning to ensure operational readiness. Delivers a fully commissioned, operational standalone modular mortuary unit.

Similar Contracts

Same NAICS industry code

Pre-Engineered Custom Waterproofing Walkway CanopiesThis subcontract involves the fabrication, supply, and installation of pre-engineered custom canopy systems for prime contractors operating on international airport projects in Florida. The scope of work focuses on the delivery of fully installed and waterproofed walkway structures, utilizing custom components to ensure total waterproofing integrity. All work must be performed in strict accordance with AISC and IBC Specifications. Interested parties should note that the response deadline for this opportunity is November 25, 2026, with the project falling under NAICS code 332311.

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Supplier of Structural Channels (NSN 2590-01-680-6100)This subcontract involves the manufacture or sourcing of four structural channels under NSN 2590-01-680-6100 to support prime contractors delivering for the DLA Weapons Support Land Supply Chain. The selected supplier must ensure all units are identified according to MIL-STD-130N and packaged in compliance with MIL-STD-2073-1E and RP001. Performance for this contract will take place in Ft Riley. Eligible providers must maintain ITAR and EAR compliance and hold certification under the US/Canada Joint Certification Program. The solicitation was posted on October 25, 2026, with a response deadline of November 5, 2026. This requirement falls under NAICS code 332311 for the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Western Area Power Administration (WAPA) Sierra Nevada Region (SNR) has a requirement for a equipment shelter at the Elverta Maintenance Facility (EMF) in Elverta, CA, to include onsite installation.The Western Area Power Administration, under the Department of Energy's Sierra Nevada Region, is forecasting a requirement for an equipment shelter to be located at the Elverta Maintenance Facility in Elverta, California. This project encompasses both the procurement of the shelter and its complete onsite installation. The opportunity is categorized under NAICS code 332311 and is designated as a small business set-aside. Western Metal Supply Company, Inc. is listed as the incumbent contractor for this requirement. Interested parties may coordinate with the Small Business Program Managers for further information.

Western Area Power Administration

POSTED

DEADLINE

Modular Building Manufacturing & SupplyThis subcontract for Modular Building Manufacturing and Supply supports Los Angeles Unified School District facility projects by providing pre-engineered and prefabricated permanent modular building systems. The scope of work involves off-site factory fabrication of modular units, including all necessary interiors and equipment, followed by the delivery of completed units to the project site. To ensure compliance with district and environmental standards, the provider must secure DSA PC approval and supply Environmental Product Declarations and embodied carbon data aligned with zero-net-energy and CHPS standards. The project is located within the Los Angeles-Long Beach-Santa Ana area, with a response deadline set for December 28, 2026.

Los Angeles Unified School District

POSTED

DEADLINE

R-27018 Permanent Modular Buildings

Solicitation # R-27018

The Los Angeles Unified School District is issuing Request for Information R-27018 to identify providers capable of delivering pre-engineered or prefabricated permanent modular buildings for TK-12 classrooms and associated support spaces. The primary objective is to gather market data to establish minimum performance standards and guide specifications for future design-build procurements. The District is specifically seeking systems that are approved by or pursuing approval from the Division of the State Architect (DSA) via Pre-Checked drawings to ensure installations can be completed without significant modification. Interested parties must submit their responses via Ariba Discovery by December 28, 2026. Required documentation includes a narrative response limited to twenty pages, a performance response matrix, planning cost and schedule information, and evidence of DSA approval. Additionally, respondents must provide technical drawings, performance certifications, and photographs of completed California K-12 projects. The District is focusing on sustainability features such as all-electric design and CHPS alignment, as well as compliance with prevailing wage requirements and safety standards for school facilities. As this is an RFI, it is for planning purposes only and does not constitute a formal solicitation or a commitment to contract.

Los Angeles Unified School District

POSTED

DEADLINE

Metal Building Installation/ErectionThis subcontract for Metal Building Installation and Erection involves the offloading and assembly of prefabricated storage buildings for the Macon-Bibb County Vehicle Maintenance Department. The selected contractor will be responsible for erecting structures according to manufacturer specifications, which includes securing frames to anchor bolts and installing vertical roofing, siding, windows, and roll-up garage doors. The scope of work requires the use of cranes and lifts to deliver a fully installed and secured commercial storage facility. The project is managed under the Macon Bibb County Board of Commissioners in Georgia. Interested parties must submit their responses by the deadline of November 19, 2026. This opportunity is categorized under NAICS code 332311 and is intended for those capable of performing specialized metal building assembly as a subcontractor to prime contractors.

Macon Bibb County Board of Commissioners

POSTED

DEADLINE

Supply of 4' x 4' Containerized Portable CabinThis subcontract agreement with Pakistan State Oil Company Ltd involves the fabrication and delivery of a 4ft x 4ft prefabricated, containerized portable cabin. The unit must be constructed from containerized steel or composite materials and delivered directly to the PSO Chakpirana Depot in Pakistan to support prime contractors on depot projects. To be eligible for the contract, the supplier must maintain active taxpayer status, supported by a valid National Tax Number and GST/PST certificates. The project requires the delivery of one completed unit, with the response deadline for the solicitation set for November 4, 2026.

Pakistan State Oil Company Ltd

POSTED

DEADLINE

PSO OP 50102 FK - Supply of Containerized Portable Cabin Measuring 4 ft × 4 ft at PSO Chakpirana Depot

Solicitation # OP 50102 FK

The Pakistan State Oil Company Limited Islamabad Divisional Office is soliciting bids for the supply of a containerized portable cabin measuring 4 ft by 4 ft for the PSO Chakpirana Depot. This procurement is being conducted in accordance with PPRA Clause 32 (1)(b), with e-bids required to be submitted through the SAP Ariba Portal. The deadline for responses is November 4, 2026, between 8:30 AM and 2:15 PM. Conditional or partial proposals will be rejected, and late submissions will not be accepted. Eligible bidders must demonstrate adequate financial capabilities and relevant past experience. Mandatory requirements include being an active taxpayer with valid NTN and GST/PST certificates, and providing a scanned copy of the CNIC for the owner or authorized representative. Additionally, vendors must certify that they have not been blacklisted by PSO or any other firm and have not been involved in any fatal accidents during the execution of a project or contract within the last five years. To request tender documents, bidders must upload a signed and stamped request on official letterhead along with the required tax and identity documentation to the portal.

Pakistan State Oil Company Ltd

POSTED

DEADLINE

Spiral Torsion Spring FabricationThis subcontract involves the manufacture and supply of four high-precision spiral torsion springs for the DLA Weapons Support Land Supply Chain. The fabrication must adhere to NSN 5360-01-476-0871 and comply with the DLA Master List of Technical and Quality Requirements, utilizing MIL-STD-1916 or ASQ H1331 sampling and MIL-STD-129 marking. Performance will take place in Phoenix, Arizona, under NAICS code 332311. The contractor must utilize precision spring-winding machinery and source domestic materials in accordance with the Buy American Act and the Berry Amendment. Strict regulatory compliance is mandatory, including CMMC Level 2 certification and adherence to ITAR and EAR regulations. Responses for this requirement are due by November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Metal Tube Assembly SupplierThis subcontract involves the supply of two metal tube assemblies for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing these assemblies to strictly adhere to NSN 4710014421274 specifications. Performance will take place in San Diego, California, under NAICS code 332311. To ensure operational quality and safety, the supplier must maintain a quality management system compliant with ISO 9001:2015 and follow Federal Standard No. 313 regarding hazardous materials. Additionally, all items must be prepared for Destination Inspection in accordance with FAR 52.246-2. The response deadline for this requirement is October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Fabrication of Access Covers (NSN 5340-01-130-6033)This subcontract, set aside for total small businesses under NAICS 332311, requires the precision sheet metal fabrication of 251 Access Covers for the DLA Weapons Support Land Supply Chain. All parts must be manufactured according to NSN 5340-01-130-6033 specifications, with a strict prohibition on the use of additive manufacturing. Finished components must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129 and delivered to DLA Distribution DDSP in New Cumberland, Pennsylvania. To be eligible, contractors must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Bus Shelters and Amenities

Solicitation # 26-15

Ben Franklin Transit (BFT) is soliciting proposals under RFP 26-15 for a contractor to design, fabricate, and deliver prefabricated bus stop shelters for use at individual stops, transit centers, and in partnership with local entities. The project requires shelters to be designed by a Registered Architect and structurally engineered to be weatherproof, vandal-resistant, and maintenance-free, utilizing clear tempered safety glass and anti-graffiti coating. All units must comply with ADA requirements and applicable building codes. The contract includes an initial minimum order of ten shelters, with the option for BFT to purchase additional units of varying sizes over a potential five-year term. Deliverables must be shipped knock-down and individually packaged with comprehensive technical documentation, assembly instructions, and estimated setup times. The initial order must be delivered within 120 calendar days of the Notice to Proceed. Proposals are due by December 8, 2026, and will be evaluated on a best-value basis, focusing on structural integrity, durability, aesthetics, and long-term performance. Applicants must provide a statement of qualifications including three to six projects completed within the last five years and certifications regarding debarment and non-collusion. The contract is governed by Washington State and Federal jurisprudence, with jurisdiction in Benton County, Washington. Payment terms are set at thirty calendar days following the receipt of a proper invoice. BFT also emphasizes equal opportunity and encourages participation from certified Disadvantaged Business Enterprises.

POSTED

DEADLINE

in about 1 month

More opportunities from Betsi Cadwaladr University Health Board

Same awarding agency

External Works and Infrastructure ContractorThis subcontract opportunity is for an External Works and Infrastructure Contractor to support prime contractors on projects for the Betsi Cadwaladr University Health Board. The selected provider will be responsible for performing modifications to existing site infrastructure and executing various external works, including paving, drainage, and utility connections. These tasks will require the use of specialized piping and earthmoving equipment to ensure the successful delivery of modified infrastructure. The solicitation was posted on October 26, 2026, with a response deadline set for November 25, 2026. Falling under NAICS code 237310, the contract focuses on the technical execution of site modifications to meet the specific requirements of the health board's facilities.

Highway, Street, and Bridge Construction

POSTED

about 5 hours ago

DEADLINE

Concrete Foundation ContractorThis subcontract opportunity is for a Concrete Foundation Contractor to support prime contractors on projects for the Betsi Cadwaladr University Health Board. The selected provider will be responsible for comprehensive site preparation and the installation of concrete bases, which includes excavation, leveling, and the pouring of foundations using ready-mix concrete, formwork, and necessary compaction equipment. The ultimate goal is to deliver a completed foundation base that is fully prepared for unit placement. The solicitation was posted on October 26, 2026, with a response deadline of November 25, 2026, at 12:00 PM. Falling under NAICS code 238110, this contract focuses on specialized concrete work to ensure structural stability for health board facilities. Interested parties can find further details through the official tender notice.

Poured Concrete Foundation and Structure Contractors

POSTED

about 5 hours ago

DEADLINE

BCU-ITT-64411 - YGC Drop Down Mortuary

Solicitation # ocds-h6vhtk-07906d

The Betsi Cadwaladr University Health Board is seeking a qualified contractor for the installation of a new modular mortuary facility and associated external works at Glan Clwyd Hospital in Bodelwyddan. The project involves the provision of a standalone LEEC sectional body store to increase mortuary capacity, executed through a phased programme that includes installing a concrete foundation base, erecting and commissioning the modular unit, and modifying existing infrastructure. The estimated contract value is 303,000 GBP excluding VAT, with a performance period scheduled from January 11, 2027, to March 31, 2027. Submission of tenders must be completed via the Bravo portal by midday on November 25, 2026. A mandatory site visit is required for all bidders to avoid disqualification, and arrangements should be made through Andrew Day. The contract will be awarded to the most advantageous tender based on a weighting of 60% cost and 40% quality. Evaluation will be conducted using a two-envelope system, separating commercial submissions from technical capabilities, including methodology, resource capacity, and risk management. Voluntary, community, and social enterprises are identified as having particular suitability for this procurement.

Commercial and Institutional Building Construction

POSTED

about 5 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS