This Solicitation opportunity from Government of Canada was posted on February 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Lenovo Nutanix Appliances HW and SW M&S

Closed

BPM025410International

Submission Closed02/25/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811210

New

International

Laboratory Systems Integration TechnicianThis subcontract opportunity is for a Laboratory Systems Integration Technician to support prime contractors on Department of Fisheries and Oceans projects within Canada. The role involves the physical installation and configuration of pH control systems, specifically requiring the wiring of probes from over 76 units to a central control hub. Technical responsibilities include configuring digital and analog outputs, implementing low-voltage shielding for mV signals, and testing dynamic feedback loops within humid tank room environments to deliver a fully commissioned integrated system. The solicitation was posted on November 10, 2026, with a response deadline of November 26, 2026. Falling under NAICS code 811210, this project is managed through the Government of Canada. Interested parties must ensure all technical requirements for system integration and environmental testing are met to successfully deliver the commissioned project.

Government of Canada / Gouvernement du Canada

POSTED

DEADLINE

Sharp Copier Technical Repair ServicesThis subcontract for Sharp Copier Technical Repair Services involves the diagnosis and repair of a Sharp MX-5141 copier supporting prime contractors on projects for the Alabama Crime Victims Compensation Commission. The scope of work focuses on resolving specific print quality issues, including ghosting and speckling, through mechanical or software repairs and comprehensive functionality testing to ensure the device is fully operational. Qualified providers must hold manufacturer-certified technician status for Sharp equipment and maintain professional insurance. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026. This opportunity falls under NAICS code 811210.

Crime Victims Compensation Commission

POSTED

DEADLINE

Solicitation # SRC0000037647

The Alabama Crime Victims Compensation Commission is seeking a qualified vendor to diagnose and repair a Sharp MX-5141 copier located in Montgomery, Alabama. The device is currently experiencing print quality issues, specifically ghosting and speckling when printing documents from computers. The selected vendor must include all fees in the total cost of repair, and the commission reserves the right to withhold the award based on budget limitations. This solicitation is managed through the Alabama Buys portal, with a total contract value not to exceed 25,000 dollars, including any potential annual renewals for up to five years. The State of Alabama maintains the right to inspect all work before acceptance and may request proof of professional licenses, certificates of insurance, or manufacturer reseller authorizations after the bid opening. Vendors must comply with state tax registrations, E-Verify enrollment, and immigration laws, and must certify that they are not debarred or suspended from government contracting. Payment will be issued via electronic methods, including state-issued credit cards or EFT, and the contract is subject to proration if sufficient revenues are unavailable.

Crime Victims Compensation Commission

POSTED

DEADLINE

Compressor Commissioning and Technical Training SpecialistThis subcontract for the City of Austin involves providing a Compressor Commissioning and Technical Training Specialist to support power plant projects for Austin Energy. The selected specialist will be responsible for performing technical validation, startup services, and personnel training for prime contractors, specifically focusing on the Decker Creek Power Station. Key technical requirements include expertise in industrial air systems and PLC-based control systems to ensure all equipment is operational and meets specifications. The scope of work includes conducting Factory Acceptance Testing and providing comprehensive on-site commissioning and startup support. Deliverables for the contract consist of detailed FAT reports and formal commissioning sign-offs. Additionally, the specialist will deliver essential technical training to plant operators to ensure the safe and efficient management of the installed systems.

POSTED

DEADLINE

PCR Instrument Installation and Performance Testing SpecialistThis subcontract opportunity is for a PCR Instrument Installation and Performance Testing Specialist to support prime contractors on projects for the Government of Ontario Ministry of Environment, Conservation and Parks. The selected provider will be responsible for the delivery, physical installation, calibration, and performance validation of PCR instruments to ensure they are fully operational and certified according to the specified statement of work. The contractor must maintain WSIB coverage and strictly adhere to all occupational health and safety regulations throughout the performance of the contract in Canada. Interested parties must submit their responses by November 26, 2026.

Environment, Conservation and Parks

POSTED

DEADLINE

Aerospace Calibration and Measurement ServicesThe Aerospace Calibration and Measurement Services subcontract involves the calibration of measuring and test equipment for prime contractors supporting DLA Aviation projects. The scope of work focuses on calibrating precision tools and maintaining detailed certification records for equipment utilized in the production of Primary Press Regulators. To ensure technical accuracy and quality, all services must be performed by a certified calibration laboratory in strict compliance with ISO 10012 or NCSL Z540.3 standards. Managed under the Department of Defense for the Pa DLA Aviation office in Philadelphia, the contract requires the delivery of validated equipment accompanied by official calibration certificates. This opportunity falls under NAICS code 811210, with a response deadline set for December 10, 2026.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

PSU Technical Maintenance and CalibrationThis subcontract, titled PSU Technical Maintenance and Calibration, involves providing technical upkeep and calibration for Portable Sampling Units used in DHS FEMA biodetection projects. The scope of work includes executing siting, performing preventative maintenance, and conducting unscheduled repairs of sampling hardware. Additionally, the contractor is responsible for tracking operational run-times and calibration frequencies to ensure adherence to program standards, with final deliverables consisting of calibrated units and detailed maintenance logs. The project is managed under the Department of Homeland Security's Support Services SECTION (SS40) and is based in Washington, DC. Due to the nature of the work, personnel are required to pass a DHS background check and sign a non-disclosure agreement. Interested parties must respond by December 4, 2026, for this opportunity categorized under NAICS code 811210.

Support Services SECTION(SS40)

POSTED

DEADLINE

Preventative Maintenance and Repair for Stratasys J850 3D PrinterThis subcontract involves providing specialized preventative maintenance and repair services for the Stratasys J850 3D printer located at Aberdeen Proving Ground in support of Army Research Laboratory facility projects. The scope of work includes conducting service visits every 3,500 hours or annually, delivering phone-based technical support, and performing necessary software and firmware updates. To ensure equipment integrity, the contractor must utilize OEM-certified personnel and proprietary diagnostic tools, providing detailed electronic maintenance reports following each visit. Managed under the Department of Defense through W6QK Acc-Apg Adelphi, the opportunity falls under NAICS code 811210. Interested parties must adhere to the response deadline of November 17, 2026. This engagement is designed for a qualified provider capable of maintaining high-precision additive manufacturing equipment within a secure government facility.

POSTED

DEADLINE

Authorized Malvern Panalytical Maintenance ServicesThis subcontract involves providing specialized inspection, preventive maintenance, and emergency repair services for the Empyrean Series III Powder X-ray diffractometer in support of Naval Air Warfare Center projects. The scope of work includes annual preventive maintenance visits and performance verification, with a specific focus on repairing goniometers, capillary spinners, and PIXcel 1D detectors. To ensure technical compliance, all services must be performed by authorized Malvern Panalytical technicians. The primary objective of the contract is to ensure the diffractometer remains fully operational, with the final deliverables consisting of a functioning system and detailed maintenance logs. This effort falls under NAICS code 811210 and is managed through the Department of Defense.

Naval Air Warfare Center

POSTED

DEADLINE

Solenoid Valve Teardown and Repair ServicesThis subcontract involves providing specialized teardown, evaluation, and repair services for Solenoid Valves (NIIN 016038265) in support of NAVSUP Weapon Systems Support Mech projects for the Department of Defense. The scope of work includes disassembling valves to assess wear, performing repairs according to technical orders and drawings, and conducting testing to ensure compliance with OEM specifications. The contractor is responsible for applying physical identification in accordance with MIL-STD-130, REV N, and must support Government Source Inspection. Final deliverables include the repaired valves accompanied by the necessary test certificates. This opportunity falls under NAICS code 811210, with a response deadline of December 10, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Authorized Pyxis Equipment Maintenance and RepairThe Authorized Pyxis Equipment Maintenance and Repair subcontract involves providing comprehensive repairs and preventive maintenance inspections for Pyxis Automated Dispensing Cabinets within Department of Veterans Affairs pharmacy projects. The scope of work includes conducting scheduled inspections, performing corrective hardware repairs, and installing components using manufacturer-specific diagnostic tools to ensure operational efficiency. To maintain equipment warranties, the service provider must hold a CareFusion Field Service Technician Affiliate certification and deliver detailed inspection reports upon completion. This opportunity is managed by the 247-NETWORK Contract Office 7 for the Department of Veterans Affairs, with the place of performance located in Dublin. The contract falls under NAICS code 811210 and requires responses by November 19, 2026. Successful contractors will be responsible for delivering fully operational units to the prime contractor to support critical pharmacy infrastructure.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

Critical Component Repair ServicesThis subcontract for Critical Component Repair Services involves providing specialized repair and troubleshooting for aerospace projects under the 748th SCMG. The scope of work focuses on returning Critical Safety Items, Critical Application Items, and Hardness Critical Items to a serviceable state. To ensure quality and safety, the contractor must obtain ESA source approval and maintain strict compliance with AFMCI 23-113 and DFARS 246.202-4 standards. Managed by the Department of Defense under NAICS code 811210, the contract requires the delivery of certified serviceable components. The place of performance is located in zip code 73145. The solicitation was posted on November 10, 2026, with a response deadline set for January 1, 2028.

F3YCCF 448 Scmw

POSTED

about 19 hours ago

DEADLINE

in about 1 year

AI Contract Overview

Shared Services Canada has issued solicitation BPM025410 for the procurement of post-warranty hardware and software maintenance and support services for Lenovo Nutanix Appliances. This federal requirement focuses on providing essential break/fix services and general maintenance for Lenovo Servers to ensure operational continuity. The contract is intended to be awarded for a one-year term, with the primary place of performance located in the National Capital Region of Canada. Interested bidders must submit their responses by the deadline of February 25, 2026. The procurement process is managed by Shared Services Canada, with Cesare Eleanor serving as the primary point of contact. Detailed requirements regarding the scope of work and specific deliverables are outlined in the associated Statement of Work and List of Deliverables provided within the solicitation documents.