Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

LEVER, MANUAL CONTROL

Active
SPE7L1-27-T-3364Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7L1-27-T-3364 is a small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of 15 manual control levers, identified by NSN 3040006013642. The contract requires delivery within 167 days after order, with an original required delivery date of February 21, 2027, and a need ship date of May 3, 2027. Delivery is FOB Origin, with the destination and acceptance point located at the DLA Distribution Depot Hill at Hill AFB, Utah. The contractor must adhere to strict quality and technical standards, including ISO 9001:2015 compliance and sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must follow ASTM D3951 and RP001, with marking and labeling conducted according to MIL-STD-129. Key regulatory requirements include CMMC Level 2 Self-Assessment, the Buy American Act, and the Berry Amendment. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system.

General Info

Small business contract for 15 manual control levers for DLA Weapons Support.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

333613 - Mechanical Power Transmission Equipment Manufacturing

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN
Office AddressUSA
Contacts
DILLON JAMES
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LEVER,MANUAL CONTROL
LEVER,MANUAL CONTROL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
CRITICAL APPLICATION ITEM
MID-AMERICA AEROTECH, LLC 0UES3 P/N 14309
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7L1-27-T-3364
SECTION B
PR: 7018997927 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018997927 0001 EA 15.000
NSN/MATERIAL:3040006013642
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML +1 (555) 000-0000
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
Need Ship Date:05/03/2027 Original Required Delivery Date:02/21/2027
SPE7L1-27-T-3364 NSN/Part Number: 3040-00-601-3642 Quantity: 15 EA Purchase Request: 7018997927QTY: 15 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
Precision Manufacturing of Bearing Retainers and RollersThis subcontract involves the precision manufacturing of 26 bearing retainers and rollers for the DLA Weapons Support ASC Commodities Division. The components must be produced in strict accordance with drawings 76301 ST4M151, 76301 ST4M162, and 98752 200415485, while adhering to quality assurance reference QAP 13873 QAP-B02. Performance of the contract will take place in Norfolk. Eligible contractors must possess precision machining equipment and hold either SAE AS9003 or ISO 9001 certification. Additionally, the provider must be certified under the US/Canada Joint Certification Program. The solicitation was posted on November 4, 2026, with a response deadline of November 12, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
MIL-SPEC Packaging and HAZMAT Shipping ProviderThis subcontract involves providing specialized military packaging and hazardous materials shipping services for prime contractors under Defense Logistics Agency supply contracts. The selected provider is responsible for delivering a fully packaged and marked battery box to the USS Tripoli LHA 7 via HAZMAT certified transport on a FOB Destination basis. All work must strictly adhere to military standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and IP025 for the handling of hazardous materials. The performance of this contract takes place at FPO 96694-2900, with a response deadline set for November 16, 2026.
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7L1-27-T-3389
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
RETAINER AND ROLLERS, B
Solicitation # SPE4A6-27-T-8289
Solicitation SPE4A6-27-T-8289 is issued by the Defense Logistics Agency (DLA) Weapons Support ASC Commodities Division for the procurement of 26 units of bearing retainers and rollers under NSN 3110-00-589-7960. These items are designated as critical application items and must be produced according to specific technical data packages, including drawings 76301 ST4M151, 76301 ST4M162, and 98752 200415485, as well as quality assurance reference QAP 13873 QAP-B02. The delivery is required within 171 days after the award date, with the place of performance and delivery located in Norfolk, Virginia, under FOB Origin terms. The contract imposes strict domestic sourcing requirements, mandating that the bearings be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the total cost of bearing components originating from these regions. Quality standards require the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging and marking must adhere to MIL-DTL-197M, MIL-STD-2073-1E, and MIL-STD-129, with a specific prohibition on the use of mercury or mercury compounds. Inspection and acceptance will occur at the origin. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with various FAR and DFARS clauses, including those regarding the safeguarding of covered defense information and the prohibition of covered defense telecommunications equipment. Technical data associated with this contract is subject to export control under ITAR or EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification. Offers are submitted via the DIBBS portal, and a price evaluation preference is available for HUBZone Small Business Concerns.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIGID
Solicitation # SPE7L1-27-T-3374
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
Precision Spur Gearshaft FabricationThis small business set-aside subcontract involves the primary machining and fabrication of 21 spur gearshafts for the Department of Defense, specifically supporting DLA Weapons Support Land projects. The scope of work requires precision turning, milling, and gear cutting in accordance with NSN 3040-00-877-3619 and RA001 requirements, utilizing specialized CNC gear hobbing and precision grinding techniques. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 certification and ensure full compliance with the Berry Amendment. The project is categorized under NAICS code 333613, with a response deadline of November 19, 2026. The final deliverable consists of 21 finished spur gearshafts meeting all specified technical standards.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
Federal
IBCTSUP-RED GEAR OVERHAUL PARTS AND TECH SERVICES
Solicitation # 70ZU0227RIBCT0001
The Department of Homeland Security, through the CG-SEA-C22 agency, intends to award a sole source, firm-fixed-price indefinite quantity contract to Timken Gears & Services Inc (dba Philadelphia Gear). The primary objective is the overhaul of reduction gears installed on 225 foot WLB buoy tenders within the Icebreaker, Buoy, and Construction Tender Product Line. This effort includes the provision of genuine Original Equipment Manufacturer parts, overhaul kits, and technical services. The contract is structured with a base period running from December 7, 2026, to December 6, 2027, followed by four optional one-year extension periods ending December 6, 2031. Technical requirements mandate that all repairs be performed to OEM specifications, with strict adherence to preservation, packaging, and marking standards such as SFLC-D-084-0481 and MIL-STD-2073-1E. Preservation treatments must protect components against corrosion and seal hardening for at least two years. Quality assurance is critical, requiring the contractor to maintain an inspection system compliant with ANSI/ASQ Q9003 and a calibration program traceable to the National Institute of Standards. Final acceptance of overhauled items is subject to validation by an onsite Government Quality Assurance Representative. The award process is based on the determination of technical capability and fair and reasonable pricing, evaluated against Independent Government Cost Estimates and past performance records. Administrative requirements include electronic invoicing via the Invoice Processing Platform and the use of specific routing codes. The solicitation is not set aside for small businesses and requires a comprehensive proposal submission, including a technical capability statement and a detailed pricing sheet, to be submitted by the November 5, 2026, deadline.
CG-SEA-C22

POSTED

about 6 hours ago

DEADLINE

in 16 days
View Details
NAICS: 333613
New
Federal
Cylinder Assembly - 7HH 3040-01-426-0986
Solicitation # SPRMM1-26-Q-KD85
Solicitation SPRMM1-26-Q-KD85 is a request for quotations issued by DLA Mechanicsburg for the manufacture and delivery of one Cylinder Assembly, A, identified by NSN 7HH 3040-01-426-0986. The item must adhere to the design represented by Cage Code reference 8FGX3 509E211RYG-4 and Technical Data Package version 003. The delivery is required within 30 days, FOB Destination to the Pearl Harbor Naval Shipyard IMF. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer. Technical acceptability requires full compliance with the solicitation terms and instructions in Section L, including the provision of traceability evidence for the manufacturing source and pricing data to establish fairness. Packaging must comply with MIL-STD-2073 using packaging code FFF, and physical identification must follow MIL-STD-130. Administrative requirements include electronic invoicing via PIEE-WAWF and compliance with cybersecurity standards under clause 252.204-7012. The solicitation also incorporates Buy American preferences and requires the submission of Safety Data Sheets for any hazardous materials. Contractors are responsible for all inspection requirements and must maintain inspection records for 365 days following final delivery.
SPRMM1 DLA Mechanicsburg

POSTED

about 6 hours ago

DEADLINE

in 26 days
View Details
NAICS: 333613
New
Federal
CYLINDER ASSEMBLY
Solicitation # N0010427QZA14
This solicitation, number N00104-27-Q-ZA14, is issued by Navsup Weapon Systems Support Mech for the manufacture or refurbishment of one Cylinder Assembly (NSN 3040-01-110-7355). The scope of work includes the teardown, evaluation, repair, and modification of the assembly in accordance with Drawing 3187504, with specific quality assurance oversight provided by the DCMA Navy Special Emphasis Organization. The requirement is processed under Emergency Acquisition Flexibilities and is DO certified for national defense under the Defense Priorities and Allocations System. Final delivery must occur within 196 days of the contract's effective date, with a requested Repair Turnaround Time of 151 days measured from the physical receipt of the asset. The government intends to make a single award based on a trade-off where past performance is considered more important than price. Offerors must provide an estimated price for the full repair effort, a cost for a new unit, and specific data including tear down and evaluation rates, throughput constraints, and induction expiration dates. The contract involves handling confidential technical data, specifically Drawing 4456141, requiring the contractor to have authorized access to classified documents. Compliance requirements include MIL-STD-2073 for packaging, Wide Area WorkFlow for electronic invoicing, and adherence to Buy American and Cybersecurity Maturity Model Certification standards.
Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333613
New
DIBBS
30--GEARSHAFT,SPUR
Solicitation # SPE7L3-27-U-0055
Solicitation SPE7L3-27-U-0055 is a total small business set-aside for the procurement of 21 spur gearshafts, identified by NSN 3040-00-877-3619. This indefinite delivery contract requires delivery within 127 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The procurement is managed by the DLA Weapons Support Land Supplier Operations Vehicle Support office in Columbus, Ohio, and utilizes the Wide Area WorkFlow system for electronic invoicing and payment processing. The contract mandates strict adherence to quality and material standards, requiring manufacturers to comply with SAE AS9003 or ISO 9001. There is a strict prohibition on the intentional use of mercury or mercury-containing compounds in the hardware and packaging. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific palletization requirements outlined in RP001. Additionally, the contract incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and cybersecurity reporting requirements under DFARS 252.204-7012.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
Supply of Distributor Air Start Cam for Fairbanks Morse Diesel EngineThis subcontract involves the manufacture or procurement of one Distributor Air Start Cam, identified by NSN 3040-00-406-3254 and Part Number 16104412, for use in Fairbanks Morse Diesel Engine Model 38D8-1/8. The project is managed under the DLA Weapons Support Land Supply Chain and requires strict adherence to DLA Master List RA001 quality standards. All items must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129 specifications. The completed component is to be delivered FOB Destination to NAVIMFAC PACNORWEST in Silverdale, Washington. This requirement falls under NAICS code 333613 and is issued by the Department of Defense. Interested parties must respond by the deadline of November 16, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
MIL-SPEC Packaging and Palletization ProviderThis subcontract opportunity is for a MIL-SPEC Packaging and Palletization Provider to support prime contractors delivering supply contracts for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The selected provider will be responsible for the preservation, packaging, marking, and palletization of shipments, ensuring all work is performed at Hill AFB. The scope of work requires strict adherence to military standards, including packaging per MIL-DTL-197M, data standards per MIL-STD-2073-1E, and markings per MIL-STD-129. Additionally, palletization must follow RP001 DLA Packaging Requirements for Procurement using approved MIL-SPEC materials to ensure the secure delivery of preserved and marked shipments.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332722
New
DIBBS
Manufacturing of Access Covers (NSN 5340-01-237-3027)This subcontract involves the manufacture and supply of four precision-engineered access covers under NSN 5340-01-237-3027 for the Department of Defense, specifically supporting DLA Weapons Support Land Supply Chain contracts. The project requires a provider with specialized precision machining and forming capabilities to fabricate the covers in strict accordance with Drawing 98752 60244-40578 (Rev C/A) and Drawing 98752 60244-40577 (Rev C) per TDP Rev A Gen 4. The work is categorized under NAICS code 332722 and will be performed at Tinker AFB. Interested parties must respond by November 16, 2026, to fulfill the requirements for these critical components.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 488510
New
DIBBS
International HAZMAT Freight Forwarder (Japan Destination)This subcontract involves the transport and delivery of hazardous engine primer fuel for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider is responsible for the international freight forwarding of these materials to the Distribution Management Office at Camp Kinser, Japan, which includes managing all necessary international customs coordination. To ensure compliance and safety, the contractor must adhere to MIL-STD-2073-1E and MIL-STD-129 for all packaging and marking. Additionally, the provider must hold valid IATA and IMDG certifications to legally and safely execute the international shipment of hazardous materials.
Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 325998
New
DIBBS
Supplier of Engine Primer Fuel (NSN 2910-01-568-0531)This subcontract involves the supply of engine primer fuel for prime contractors supporting DLA Weapons Support Land Supply Chain projects. The contractor is responsible for providing one unit of Deere and Company part number AT171162, identified by NSN 2910-01-568-0531, ensuring full compliance with DLA Master List technical requirements RA001 and RQ011. The delivery must be made to Camp Kinser, Japan, and must include a corresponding Safety Data Sheet. To be eligible for this contract, the supplier must maintain HAZMAT handling certification and adhere to all Buy American Act regulations. The opportunity is categorized under NAICS code 325998 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 16, 2026.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333249
New
DIBBS
Supply of Manual Control Levers (NSN 3040006013642)This subcontract involves the supply of 15 manual control levers, specifically identified by NSN 3040006013642, to support prime contractors delivering DLA supply contracts. The agreement is managed under the Department of Defense through the DLA Weapons Support Land Supply Chain, with the place of performance located at Hill AFB. The contractor must ensure that all deliverables strictly adhere to quality assurance standards defined in RQ001 Tailored Higher Level Contract Quality Requirements. Additionally, all packaging must comply with RP001 DLA Packaging Requirements to ensure the integrity of the components during delivery.
Other Industrial Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and Hazardous Materials HandlingThis subcontract focuses on providing specialized military-grade packaging and logistics services for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work includes the packaging, labeling, and palletizing of hardware in strict compliance with MIL-STD-129 and DLA requirements. Additionally, the contractor is responsible for managing hazardous materials protocols and providing necessary Safety Data Sheets for all coatings and packaging materials used. The final deliverables consist of fully packaged and palletized shipments delivered to DLA Distribution in Cherry Point, North Carolina. This opportunity falls under NAICS code 488510 and is managed by the Department of Defense. Interested parties must adhere to the response deadline of November 16, 2026.
Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332322
New
DIBBS
Precision Fabrication of Angle Brackets (NSN 5340-01-185-4560)This subcontract involves the precision fabrication of 497 angle brackets for the DLA Weapons Support Land Supply Chain. The manufacturer must produce the parts according to drawing 78286 SS1048 using traditional subtractive or formative methods, such as CNC milling, stamping, or bending, while strictly avoiding additive manufacturing processes. To be eligible, contractors must be JCP certified for technical data access and maintain compliance with ITAR/EAR regulations and either SAE AS9003 or ISO 9001 quality standards. The project is associated with NAICS code 332322 and specifies a place of performance in Cherry Point.
Sheet Metal Work Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
Exhaust Pipe Supply (NSN 2990-01-148-8195)This subcontract involves the manufacture or procurement of one exhaust pipe specifically designed for fuel servicing tank trucks under the DLA Weapons Support Land Supply Chain. The component must adhere to NSN 2990-01-148-8195 specifications for Mack Trucks and Kovatch Corp. Technical requirements include the application of P-19 preservative to all bare ferrous metal surfaces, with packaging and marking conducted in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The project is categorized under NAICS code 336390 and requires delivery of the packaged unit FOB Origin to Fort Sill, Oklahoma. Interested parties must respond by the deadline of November 16, 2026, to support the Department of Defense agency requirements.
Other Motor Vehicle Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 493110
New
DIBBS
MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports the DLA Weapons Support Land Supply Chain under the Department of Defense. The selected provider will perform specialized military-grade packaging, marking, and palletization for prime contractors, ensuring all items are sealed in medium-duty, waterproof, greaseproof, and opaque bags. All work must strictly adhere to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization, requiring the use of specific MIL-SPEC marking and labeling equipment to deliver shipments ready for transport. The project is categorized under NAICS code 493110 and will be performed in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 16, 2026, following the posting date of November 4, 2026.
General Warehousing and Storage

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 326199
New
DIBBS
Critical Application O-Ring SupplierThis subcontract involves the manufacture or procurement of 361 O-rings under NSN 5331014426598 to support prime contractors for the DLA Weapons Support Land Supply Chain. The supplier must ensure all materials are asbestos-free and adhere to critical application quality standards, with strict compliance required for the Buy American Act and asbestos-free material certification. The contract requires the delivery of the units FOB Origin to the DLA Distribution DDSP New Cumberland Facility. This opportunity falls under NAICS code 326199 and is managed by the Department of Defense.
All Other Plastics Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 561910
New
DIBBS
MIL-STD Packaging and MarkingThis subcontract involves providing military-grade packaging and marking services for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work requires the application of markings according to MIL-STD-129 and the execution of packaging per MIL-STD-2073-1E, specifically utilizing standardized military marking equipment and WRAP MAT:FA materials. The project entails the processing and delivery of 21 units packaged for shipment to DLA Distribution DDSP New Cumberland. This effort falls under NAICS code 561910 and is managed under the Department of Defense.
Packaging and Labeling Services

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 331210
New
DIBBS
Berry Amendment Compliant Metal SupplyThis subcontract involves the supply of raw metal stock, such as castings, bars, or billets, to support prime contractors for the DLA Weapons Support Land Supply Chain. The scope of work focuses on providing domestic materials that adhere to specific alloy and grade requirements for NSN 5340-01-737-0366, with final delivery of the certified stock to the designated fabricator in New Cumberland. To ensure regulatory compliance, the supplier must provide Material Test Reports certifying that all materials meet the standards of the Buy American Act and the Berry Amendment. This procurement falls under NAICS code 331210 and is managed by the Department of Defense.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332710
New
DIBBS
Manual Control Lever FabricationThis subcontract involves the precision machining, milling, and fabrication of 21 manual control levers for the DLA Weapons Support Land Supply Chain. The project requires the use of CNC milling and turning equipment to produce components that strictly adhere to NSN 5340-01-737-0366 and RA001 technical specifications. Performance of the work will take place in New Cumberland. To be eligible, the contractor must maintain ITAR/EAR compliance, a CMMC Level 2 self-assessment, and certification under the US/Canada Joint Certification Program. The contract falls under NAICS code 332710, with a response deadline set for November 16, 2026.
Machine Shops

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS