Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on April 6, 2021. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

LGA North Drainage Pumps

Closed
W912EF21Q0072Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333914
New
DIBBS
LUBRICANT PACKER, BEARI
Solicitation # SPE8EE-27-T-0265
Solicitation SPE8EE-27-T-0265 is a fixed-price request for quotations issued by the DLA Troop Support Construction and Equipment Manufacturing and Construction office for the procurement of 14 units of Lubricant Packer, Bearing (NSN 4930-00-052-1764). The requirement falls under NAICS code 333914 and is managed under the First Destination Transportation program with shipping terms set as FOB Origin. Delivery is required within 167 days after the order, with a need ship date of April 26, 2027, and a destination of DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality standards, including MIL-STD-130N for identification and MIL-STD-129 for shipment marking. Packaging must comply with MIL-STD-2073-1E and DLA requirement RP001, with specific instructions to apply P-19 preservative to exterior bare ferrous metal surfaces. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Evaluation of offers requires a complete data package, and the government will not consider items produced via additive manufacturing. Additionally, the procurement incorporates various DFARS and FAR clauses regarding cybersecurity, the Buy American Act, and HUBZone price evaluation preferences. Quotations must be submitted via the DIBBS portal by November 9, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 19 hours ago

DEADLINE

in 11 days
NAICS: 333914
New
DIBBS
SLEEVE, SHAFT, PUMP
Solicitation # SPE7M0-26-T-9435
Solicitation SPE7M0-26-T-9435 is a request for quotations issued by the Department of Defense, specifically the DLA Land and Maritime Maritime Supply Chain ESOC Buys, for the procurement of one pump shaft sleeve identified by NSN 4320-01-123-0197. The requirement specifies a delivery timeline of five days after the order is placed, with the destination and acceptance point located at W8VP NJ ARNG CSMS 1 in Manchester, New Jersey. The procurement is categorized under NAICS code 333914 and includes specific approved part numbers from Curtiss-Wright Electro-Mechanical. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence over ASTM standards. Palletization must follow RP001 requirements. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Key regulatory clauses are incorporated, including the Buy American and Balance of Payments Program, safeguarding of covered defense information under DFARS 252.204-7012, and prohibitions on the acquisition of certain telecommunications equipment. Evaluation for award will consider the HUBZone price evaluation preference, and offers utilizing additive manufacturing are ineligible unless specifically authorized.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 4 days

General Info

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment Manufacturing

Place of Performance

Dayton, WA, 99328, USA

Set-Aside

SBA

Documents

4

A.03.09+Pump+Drawing+%281%29.pdf

PDF

A.03.09+Pump+Drawing+%282%29.pdf

PDF

B.08.02+KO+released+Solicitation+W912EF21Q0072.pdf

PDF

B.08.03+KO+released+Solicitation+Amendment+W912EF20Q0072+0001.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseClosed
Posted

Presolicitation

Type Changed

Presolicitation → Solicitation

Notice updated

The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → US Army Engineer District Walla Wal
Contacts1 person available
OfficeWALLA WALLA, WA, 99362-1876, USA
Office AddressWALLA WALLA, WA, 99362-1876, USA

Full Description

Show more
Please see attached Solicitation, Solicitation Amendment, and attached drawings of existing pumps. The US Army Corps of Engineers, Walla Walla District is issuing a solicitation for the purchase of three (3) new vertical turbine pumps. The NAICS code applicable to this acquisition is 333914, with a Small Business Size Standard of 750 employees as determined by 13 CFR 121.104. Competition for this requirement is Set-Aside for small business. Offers received from other than small business offerors will not be considered. When available, the solicitation documents for this project W912EF21Q0072 will be provided via Beta.SAM https://www.beta.sam.gov on or around 26 March 2021. Please do not submit a quote without the solicitation package that will be provided to industry by the Government as specified above. The solicitation will be a Request for Quote (RFQ). The official quotation due date will be contained in the solicitation and any solicitation amendments that may be issued. TECHNICAL SPECIFICATIONS The successful bidder shall provide three (3) vertical turbine pumps along with associated motors that will be mounted to fit the existing discharge piping and sump configuration currently installed at Little Goose Lock and Dam and conform to the specifications listed in section 3.0 entitled SPECIFICATIONS, as described in the technical specifications within the solicitation document. Submittals shall include a copy of the O&M manual, specification sheets, and warranty. Submittals will be reviewed by the Mechanical Engineer at Little Goose Lock and Dam. The vertical turbine pumps shall be covered by a minimum one-year warranty on all parts, labor, and workmanship from factory defects. The factory representative and/or a contractor's service technician shall furnish instructions for recommended installation of the pump assembly and include instructions for the recommended commissioning process. Important Note: the Beta.SAM response date listed elsewhere in this synopsis is for Beta.SAM archive purposes only. It does not necessarily reflect the actual due date that the RFQ is due. NO CD's OR HARD COPIES WILL BE AVAILABLE. Offeror's are responsible for checking the reference page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for a bidder's inability to access the document posted at the referenced website. To obtain automatic notifications of updates to this solicitation, you MUST log in to Beta.SAM.gov and add the solicitation to your Watchlist. If you would like to list your firm so others can see you are an interested vendor, you must click the quote mark Add Me to Interested Vendors button in the listing for this solicitation on Beta.SAM.gov. All quotes received by the closing date that are small businesses will be considered by the Government. To be eligible for contract award, offerors must be registered in the System for Award Management (SAM). Register via the SAM website at https://www.beta.sam.gov or contact SAM Customer Service at +1 (555) 000-0000. Offerors must also complete Offeror Representations and Certifications on-line at https://www.beta.sam.gov.

More opportunities from Department Of Defense → US Army Engineer District Walla Wal

Same awarding agency

NAICS: 332812
New
Federal
Dworshak Skeleton Bay Draft Tube Bulkhead Rehabilitation
Solicitation # W912EF27QA0020001
The US Army Corps of Engineers, Walla Walla District, is soliciting offers for the rehabilitation of twelve draft tube bulkheads and associated seal keeper bars at the Dworshak Dam. This small business set-aside project requires the contractor to provide all personnel, materials, equipment, and transportation to move the bulkheads from Dworshak Dam to a repair facility and back. The scope of work includes existing coating removal, weld inspection and repair according to AWS D1./D1.M standards, and the application of new coatings in compliance with SSPC SP 5/NACE No. 1 and Section 09 97 02.00 28 for hydraulic structures. The government provides the bulkheads as government furnished property, with each unit having an estimated value of 850,000 dollars. The project is structured in three phases, with each phase involving two top and two bottom bulkheads. Performance is scheduled between November 23, 2026, and July 5, 2027, with specific pickup and return windows for each phase. Deliveries and retrievals must be coordinated 15 days in advance and occur Monday through Thursday. Key requirements include a one-year warranty on the coating system, the submission of general inspection reports within five business days of each inspection, and the provision of manufacturer safety data sheets and CERL Lab certification for all paint materials. The contractor must also ensure all paint is stored and packaged according to strict safety and stability guidelines to prevent degradation.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 811310
Federal
LLA Fish Pump - Motor Rewind
Solicitation # W912EF27QA006
Solicitation W912EF27QA006 is a combined synopsis and request for quotation issued by the US Army Engineer District Walla Walla for motor rewind and asbestos abatement services at the Lower Granite Dam in Pomeroy, Washington. The scope of work involves the rewinding, refurbishing, and addition of eight resistance temperature detectors to three polyphase AC squirrel cage induction motors used for fish pumps. This includes one Hitachi dual winding motor and two Ideal Electric single-winding motors. To ensure operational continuity, the project will be executed by rewinding one motor per year, with a total performance period extending through December 2029. The contract is a firm-fixed-price acquisition and is not set aside for small business concerns, although evaluation preferences are provided for HUBZone small businesses. Key technical requirements include the use of a minimum class F motor insulation system and strict adherence to core loss and hot spot specifications. Deliverables include the refurbished motors, final operation and maintenance manuals, and on-site commissioning support. The government has established a seven-business-day window for the acceptance or rejection of services following delivery. Liquidated damages are specified for delays, with daily rates increasing annually from FY28 through FY30. Offerors must comply with various federal regulations, including the Buy American and Balance of Payments Program, E-Verify personnel screening, and DFARS cybersecurity reporting standards.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

7 days ago

DEADLINE

in 25 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS