Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

LIGHT, PANEL

Active
SPE4A6-26-T-85A1Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement of two LIGHT,PANEL units under solicitation SPE4A6-26-T-85A1, with a delivery deadline of 171 days after contract award. The items must strictly conform to the source-controlled drawing referenced in the solicitation, and only approved sources listed on the drawing are initially authorized, though additional sources may be approved later. All items must comply with stringent technical and quality requirements referenced from the DLA Master List, and the use of Class I ozone-depleting chemicals is strictly prohibited, even if specifications previously allowed them, with any substitute chemicals requiring prior approval. The product is subject to export control under ITAR or EAR regulations, meaning technical data associated with it cannot be disclosed to foreign persons without authorization from the Department of State or Commerce, and contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DLA training, and receive specific approval to handle the controlled data. Item Unique Identification is not required per the service customer's request, and all supplies must adhere to DLA packaging standards and removal procedures for government identification on non-accepted items. The contracting activity is the ASC Commodities Division within the Department of Defense, with performance taking place in New Cumberland, PA, and inquiries should be directed to the primary point of contact, Chinh Le.

General Info

Procure two LIGHT,PANEL units under ITAR/EAR control, deliver in 171 days, comply with DLA standards, no ozone-depleting chemicals.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

333515 - Cutting Tool and Machine Tool Accessory ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-85A1.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
CHINH LE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LIGHT,PANEL
LIGHT,PANEL
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED
DRAWING AND AS OF THE DATE OF THIS SOLICITATION
ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE
BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED
PART NUMBERS ARE PROVIDED, THE ITEMS
FURNISHED MUST MEET THE REQUIREMENTS OF THE
CITED DRAWING. OFFERORS WHO ARE INTERESTED IN
QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE
ACQUISITION MUST CONTACT THE COGNIZANT DESIGN
ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED
DRAWING.
ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES
THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT
THIS TIME.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be
SPE4A6-26-T-85A1
SECTION B
exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 6220-01-593-8778 Quantity: 2 EA Purchase Request: 7017109231QTY: 2 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333515
New
DIBBS
TREPANNING TOOL, MACHINThe contract calls for the procurement of 10 units of a trepanning tool, machine cutter, hole broaching, identified by NSN 3455011951701 and part number 11104 from Hougen Manufacturing, Inc., with delivery required within five days after award to the Letterkenny Army Depot in Chambersburg, Pennsylvania. The contract is issued under solicitation SPE8E5-26-T-3632, with a response deadline of July 31, 2026, and a required delivery date of July 17, 2026. The delivery is FOB origin, meaning the contractor assumes responsibility for packaging and loading the items at their facility, after which the government assumes all transportation risk and cost. The unit price is $4.73 per unit, totaling $47.30 for the base quantity. All items must be packaged per ASTM D3951, but compliance with the DLA Master List of Technical and Quality Requirements takes precedence over this standard. Packaging and labeling must strictly adhere to MIL-STD-129, including correct Unit of Issue and Quantity per Unit Pack, with palletization following RP001 DLA Packaging Requirements. Items must be shipped by the fastest traceable means, excluding parcel post, and marked with the designated freight and delivery address, including the government-specific marking code W25G1Q61940055. The contract incorporates multiple FAR and DFARS clauses governing safety, cybersecurity, procurement integrity, and compliance. Key clauses include 52.240-93 and 252.204-7012 for safeguarding covered defense information, 252.240-7997 for NIST SP 800-171 assessments, 252.223-7008 prohibiting hexavalent chromium, and 252.225-7048 for export-controlled item compliance. Inspection and acceptance occur at the destination, with the government assuming responsibility for both processes under FAR 52.246-2. Contractors must be registered in SAM, hold a valid UEI and CAGE code, and comply with all socioeconomic representation requirements if claiming small business status. Hazardous materials must be labeled per 29 CFR 1910.1200, and any exemptions must
Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333515
New
DIBBS
CENTER, LATHEThe contract specifies the procurement of seven center lathe units with NSN 3460-01-109-4773 under solicitation SPE8E9-26-T-3187, issued by the Department of Defense through the Construction & Equipment MRO Service I. Delivery is required within 20 days of award, FOB origin, with no quantity variance permitted, and inspection and acceptance occur at the destination. Packaging must comply fully with MIL-STD-2073-1E, MIL-PRF-23199E, and MIL-STD-129 for marking, and barcoding must adhere to ISO/IEC 16388. Palletization follows DLA packaging requirements, and shipment must use traceable freight methods, explicitly prohibiting parcel post. The delivery address is in Savannah, Georgia, and the item is supplied by CARO INC. DBA South Bend Lathe under part number CE1890. All technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with sampling protocols mandating MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, where critical, major, and minor attributes require verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required unless otherwise stated, and MIL-STD-105/ASQ Z1.4 may only be used to determine sample size. Mercury and mercury-containing compounds are strictly prohibited from direct contact with supplied hardware except for specific functional applications such as batteries, fluorescent lights, instruments, sensors, weapon systems, or chemically specified reagents, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The solicitation response deadline is July 30, 2026, with an original required delivery date of July 15, 2026, and primary contract oversight is managed by Matthew Kruc of DLA.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333515
New
DIBBS
INSERT, CUTTING TOOLThe contract is for the procurement of nine cutting tool inserts, identified by part number NTP-3L/K68 and NSN 3455011028634, under solicitation SPE8E5-26-T-3623 issued by the Defense Logistics Agency. Delivery is required within 20 days to the destination specified as Muwaffaq Salti Air Base in Jordan, with FOB destination terms and no variance allowed in quantity. All items must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, using the specified packaging code and methods including dry preservation and no special marking. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The contractor, Kennametal Inc. Div Charlotte, must ensure all supplies are properly prepared, labeled, and shipped without government identification if not accepted. Transportation logistics follow DLAD Proc Note C19 and C20, with government use identifiers and freight details confirmed. The required delivery date is set for July 15, 2026, and the contract is classified under NAICS code 333515 for industrial machinery manufacturing.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333515
New
DIBBS
SUPPORT, AUXILIARY AThis contract, issued by the Defense Logistics Agency under solicitation number SPE8E5-26-T-3630, is for the procurement of one unit of a supported auxiliary component with NSN 3460-01-341-6141 and part number 1-232-5006, to be delivered FOB destination within 20 days. The item must comply with stringent packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, with no special marking and palletization aligned to DLA packaging guidelines. Zero tolerance is enforced for quantity variance, and inspection and acceptance occur at the destination. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the supplied hardware except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or NAVSEA-approved chemical reagents, with portable mercury-containing devices requiring shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are verified at predefined levels: VII for critical, IV for major, and II for minor. The contract incorporates technical and quality requirements from the DLA Master List, including covered defense information provisions, and mandates adherence to the DoD unit of issue standards. Delivery is directed to USS BULKELEY DDG 84 at FPO AE 09565 with vessel shipment procedures governed by DLAD Proc Notes C19 and C20, and the contracting officer’s point of contact is Ira Hedgepeth.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333515
New
DIBBS
Precision Milling Cutter SupplyThe contract requires the supply of a single side milling cutter identified by NSN 3455-01-420-0298, with strict adherence to military standards for full traceability, proper packaging, precise marking, and timely delivery. All deliverables must meet stringent quality and documentation requirements to ensure compatibility and reliability in defense applications. The procurement is classified as a subcontract under NAICS code 333515, indicating specialized manufacturing of metal cutting tools, and is being administered by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 15, 2026, with a firm response deadline of July 22, 2026, and all activities are linked to the official DIBBS platform for transparency and compliance.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

in 1 day
View Details
NAICS: 333515
New
DIBBS
INSERT, CUTTING TOOLThe contract is for the procurement of six inserts for cutting tools, identified by NSN 3455-01-412-4557, under solicitation number SPE8E5-26-T-3605, issued by the Defense Logistics Agency on behalf of the Department of Defense. The requirement is for delivery within ten days of award, with the place of performance specified as Fort Irwin, California, 92310-9986. The solicitation was posted on July 15, 2026, and responses are due by July 27, 2026. This procurement falls under NAICS code 333515, indicating it is for industrial machinery and equipment manufacturing. The contract incorporates all applicable technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date for simplified acquisitions. DLA packaging requirements apply, and the provision for removal of government identification from non-accepted supplies is in effect. Additionally, Covered Defense Information potentially applies, and any contractor handling the materials must comply with related safeguards. Primary point of contact is Don Trachtman, reachable via email and phone listed in the contract data.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 333515
New
DIBBS
FILE, ROTARYThis contract issued by the Defense Logistics Agency under solicitation SPE8E5-26-T-3601 pertains to the procurement of 10 units of a rotary component identified by NSN 3455-01-253-6024 and part number AA51171A-2A2B, with a unit price of $10.00 per item and a total contract value of $100.00. Delivery is required within 20 days of contract award, FOB origin, with no variance allowed in quantity and inspection and acceptance to occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, strictly adhering to DLA’s Master List of Technical and Quality Requirements which supersede any conflicting standards. Palletization must follow RP001: DLA Packaging Requirements for Procurement, and all shipments must utilize traceable freight methods—parcel post is explicitly prohibited. The delivery address is designated as FB6511, 3212 Annapolis St, JB Andrews MD 20762-5011, with a freight shipping contact number provided for coordination. The original required delivery date is July 13, 2026, and the contract includes specific government use identifiers including IPD, DIC, DIST, and ADV codes for internal tracking. The solicitation was posted on July 15, 2026, with a response deadline of July 27, 2026, and the North American Industry Classification System code is 333515. Point of contact for inquiries is Khue Nguyen at DLA, reachable by phone or email. Compliance with DLA’s technical and quality requirements as referenced in the Master List is mandatory and controls over any other cited specifications.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 333515
New
DIBBS
CUTTER, MILLING, SIDEThe contract specifies the procurement of one milling cutter, side, identified by NSN 3455-01-420-0298, under solicitation SPE8E5-26-Q-0344, issued by the Defense Logistics Agency. The item is supplied by ILCO UNICAN CORP DBA WOLF SALES with part number P-X23MC under a firm fixed price arrangement with no tolerance for quantity variance. Delivery is required within 180 days after award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and cushioning, while markings adhere to MIL-STD-129 with no special codes. All packaging and palletization must follow DLA’s RP001 packaging requirements. The shipment is directed to USS OSCAR AUSTIN DDG 79 at FPO AE 09581, with transportation governed by DLAD procedural notes C19 and C20. Mercury and mercury-containing compounds are strictly prohibited unless exempted for specific applications such as batteries, lamps, sensors, or weapon systems, and even then must meet containment and safety standards per NAVSEA 5100-003D. Technical and quality requirements referenced are pulled from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition type. The contract includes federal shipping and tracking identifiers including V21953, RDD 999, and TCN V219536182ER90, and requires compliance with all DLA procedures for defense supply chain logistics. The government-issued material need date is July 9, 2026, and the solicitation response deadline is July 22, 2026, with Devin Duffy as the designated point of contact.
Defense Logistics Agency

POSTED

6 days ago

DEADLINE

in 1 day
View Details
NAICS: 333515
New
DIBBS
CUTTER, MILLING, ANGLThe contract specifies the procurement of six milling cutters with a 2 3/4 inch diameter, 60-degree included angle, 1/2 inch face width, and a 1 inch hole diameter, all governed by technical standards including a Rockwell C62 to C66 hardness requirement for the cutting end and verification through testing. Each cutter must feature 18 to 20 teeth and comply with ASME B94.19 Revision A General 2 specifications. The contract strictly prohibits the intentional inclusion of mercury or mercury compounds in any supplied hardware, except for permitted exceptions such as batteries, fluorescent lamps, instruments, sensors, weapon systems, and chemical reagents authorized by NAVSEA, with mercury-containing portable devices requiring shockproof construction and a secondary containment barrier as stipulated by NAVSEA 5100-003D. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requiring zero non-conformances unless otherwise directed. Packaging must adhere to MIL-STD-2073-1E with preservation method 30, no cleaning or drying, and wrapped in unspecified materials, with unit containers as EP and intermediate containers left undefined, all marked in accordance with MIL-STD-129 using special marking code 00–00 to indicate no special markings. Palletization follows DLA’s RP001 packaging requirements. The item, identified by NSN 3455-00-240-7322, is priced at a firm fixed rate with zero tolerance for quantity variance, delivered FOB origin within 60 days after contract award, and inspected and accepted at destination. Transportation and shipping instructions direct delivery to DLA Distribution Depot Oklahoma at Tinker AFB, with reference to DLAD procedural notes C19 and C20 for freight details. The contract, issued under solicitation SPE8E9-26-Q-0548, was posted on July 14, 2026, with responses due by July 21, 2026, and the material is required for delivery by June 16, 2027, under a
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

7 days ago

DEADLINE

in 38 minutes
View Details
NAICS: 333515
International
Fiber Laser Cutting System Supply and DeliveryThe contract specifies the supply and delivery of a high-precision enclosed fiber-laser cutting system designed for processing aluminum and copper components used in battery prototyping. The system must be an off-the-shelf product, with no modifications or customizations permitted, and must be guaranteed as non-counterfeit to ensure compliance with quality and safety standards. Delivery is required under DAP Ottawa terms per Incoterms® 2020, meaning the seller is responsible for all costs and risks until the equipment is placed at the designated destination in Ottawa, Canada, but the buyer assumes responsibility for unloading and local duties or taxes. The solicitation is issued under the NAICS code 333515, which corresponds to machine tool manufacturing, and is classified as a subcontract opportunity by the National Research Council of Canada, acting on behalf of the Government of Canada. The response deadline is set for July 27, 2026, and the contract is open for bidders to submit proposals through the Canada Buys platform. The place of performance is clearly identified as Ottawa, Canada, with no other locations accepted, and the equipment must be fully operational upon delivery to support immediate integration into ongoing battery development workflows.
National Research Council of Canada

POSTED

19 days ago

DEADLINE

in 6 days
View Details
NAICS: 333515
International
Fiber Laser Cutter for Aluminum and CopperThe National Research Council Canada is soliciting offers for a high-precision, enclosed fiber-laser cutting system designed to reliably cut aluminum and copper components for battery prototyping, with the requirement that the system have a fiber-type laser, a minimum power output of 3000W, and a 10:1 operational turn-down ratio from 10% to 100% power. The machine must feature a work area between 400x300mm and 635x635mm, a Z-axis of at least 50mm, and positioning precision of 0.1mm or better, with cutting speeds of at least 1 meter per minute on 4.064mm aluminum and 3.175mm copper. The system must include auto-tracking laser head technology, a fully enclosed operational area, an integrated gas assist system supporting oxygen, nitrogen, and air, and an active protection system to manage back-reflected laser energy. Delivery, installation, commissioning, and training are included in the scope, with the primary delivery point located at NRC Building U91, 2320 Lester Road, Ottawa, ON K1V 1S2. All submissions must comply with environmentally preferable packaging standards, excluding only packaging tape and specialized packaging for technical performance needs, and all shipments must include a packing slip with item, quantity, part numbers, description, contract number, CRN, and PBN, along with a transportation bill of lading accompanying the original invoice unless it is a collect shipment. Offers must be submitted electronically by July 27, 2026, at 14:00 EDT to the designated NRC email address, structured as three separate attachments labeled Technical Offer, Financial Offer, and Forms, with no compressed files or external links permitted and a total message size under 10MB. Only Canadian suppliers are eligible under the Policy on Reciprocal Procurement, and proposals must include completed Annex A - Offer Submission Form and Annex B - Offeror Declaration Form, along with an Integrity Declaration Form. All technical proposals must meet mandatory requirements identified with “must” or “mandatory” as defined in Annex F, and only those passing this gate will be invited to submit sample cuts for evaluation under Section 4.2 of Annex C within 15 business days of receiving materials, accompanied by a cutting report detailing equipment, operator, power rating, and gas parameters. The award will be based on the lowest
National Research Council of Canada

POSTED

19 days ago

DEADLINE

in 6 days
View Details
NAICS: 333515
Federal
Electrochemical Plating Line Design & IntegrationThe contract entails the design, fabrication, and full integration of a turnkey electrochemical plating line consisting of nine tanks along with associated control systems, rectifiers, and sensors, engineered to align seamlessly with the existing P6 and P7 plating lines to ensure operational consistency and scalability. The system must be fully functional upon delivery, meeting all technical specifications and performance benchmarks required for industrial-grade electrochemical processing. All components are to be standardized to the established platform to simplify maintenance, training, and future upgrades. The work is to be performed at a location with a zip code of 92135, and the contract falls under NAICS code 333515, indicating it is classified as industrial machinery manufacturing. It is structured as a subcontract under the Department of Defense, specifically managed by DLA Aviation, and was posted on July 1, 2026. Although the solicitation number and point of contact are not provided, the contract is accessible through the SAM.gov portal for further details and compliance tracking. There is no set-aside designation specified, indicating the opportunity is open to all eligible subcontractors without restrictions based on business size or ownership type.
DLA Aviation

POSTED

21 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 483111
New
DIBBS
Transportation and Delivery Logistics (Including Sea Transport)The contract encompasses the comprehensive arrangement and execution of transportation logistics, with a specific focus on sea transport, to support Department of Defense operations. All activities must strictly comply with DFARS 252.247-7023, ensuring adherence to defense-related transportation regulations, and must utilize the Wide Area WorkFlow system for invoicing to meet federal financial reporting standards. The solicitation is a subcontract under a Total Small Business Set-Aside designation, restricting eligibility solely to small businesses as defined by the Small Business Administration, and is classified under NAICS code 483111 for water transportation of crude oil or petroleum products. Performance is designated for Cherry Point with a zip code of 28533-5040, indicating the primary operational location for delivery and logistics activities. The opportunity was posted on July 20, 2026, with a response deadline of July 28, 2026, and is managed by the ASC Commodities Division under the Department of Defense.
Deep Sea Freight Transportation

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and SDS ManagementThe contract requires the identification, documentation, and timely submission of Safety Data Sheets for all hazardous materials used in packaging or preservation processes, ensuring full compliance with OSHA’s Hazard Communication Standard and Federal Standard No. 313. All SDS must be accurate, up to date, and formatted according to regulatory requirements to support workplace safety and regulatory audits. The work is tied to hazardous material handling within the Department of Defense’s ASC Commodities Division, with performance specifically located at Cherry Point, North Carolina, 28533-5040. This is a Small Business Set-Aside subcontract under NAICS code 541620, restricted to small businesses as defined by the SBA, and is open for response until July 28, 2026. The solicitation is managed through the DLA DIBBS system and does not specify a point of contact, requiring potential offerors to review the complete posting on the provided DIBBS link for full submission requirements. Compliance with federal safety standards is mandatory, and failure to properly document and submit SDS could result in non-compliance and contract termination.
Environmental Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Preservation, and Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services for bearings, strictly adhering to the standards outlined in MIL-DTL-197M, MIL-STD-2073-1E, and MIL-STD-129. All work must include thorough quality verification procedures and comprehensive recordkeeping to ensure full compliance with Department of Defense requirements. The services are intended for delivery to the specified place of performance in Cherry Point, North Carolina, with all packaging and labeling executed to meet rigorous military specifications for durability, traceability, and environmental protection throughout the supply chain. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, limiting eligibility exclusively to small businesses certified by the SBA. The North American Industry Classification System code 493190 applies, indicating the work falls under other warehousing and storage services. The opportunity was posted on July 20, 2026, with a firm response deadline of July 28, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Interested parties must submit proposals through the designated DIBBS portal by the specified deadline to be considered for award.
Other Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
Cylindrical Roller Bearing Supply (Source-Controlled Manufacturer)The contract mandates the supply of 55 units of a cylindrical roller bearing identified by Part No. 580274-1 and NSN 3110010087937, manufactured and tested exclusively by an approved source under proprietary limited rights data and stringent military specifications. The product must comply with all required technical and quality standards as defined by defense protocols, ensuring reliability and performance in critical military applications. Production and delivery are subject to strict sourcing controls, requiring adherence to certified manufacturing processes and testing procedures validated by authorized entities. This is a subcontract under a Total Small Business Set-Aside designation, restricted to small businesses as defined by the SBA and governed by FAR 19.5. The North American Industry Classification System code 332991 applies, indicating the work falls under other fabricated metal product manufacturing. The contract was posted on July 20, 2026, with responses due by July 28, 2026, and the place of performance is designated as Cherry Point, North Carolina, with a zip code of 28533-5040. The awarding agency is the ASC Commodities Division under the Department of Defense, and the procurement is accessible via the DIBBS system for interested small business vendors.
Ball and Roller Bearing Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811212
New
DIBBS
Government Inspection and Acceptance SupportThe contract requires comprehensive support for government inspection and acceptance activities at the point of origin, strictly adhering to MIL-STD-1916 and ASQ Z1.4 quality standards. The contractor must ensure zero non-conformances throughout the inspection process, maintaining rigorous quality control measures and detailed documentation to demonstrate compliance. All quality records must be systematically maintained, readily accessible, and aligned with Department of Defense expectations for traceability and audit readiness. Coordination with Defense Logistics Agency inspectors on-site is mandatory, requiring seamless communication, timely responses, and full cooperation during all phases of inspection and acceptance. This is a subcontract under the Department of Defense’s ASC Commodities Division, categorized under NAICS code 811212, indicating services related to institutional and commercial laundry and dry cleaning, though the specific nature of the items being inspected is not detailed. The opportunity was posted on July 20, 2026, with a response deadline of July 28, 2026. The place of performance and point of contact information are unspecified, and the work is expected to be conducted at the supplier’s origin location under the direct oversight of DLA personnel. All activities must be executed with the highest level of precision and accountability to meet federal quality and acceptance requirements without deviation.
Computer and Office Machine Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication and Labeling ComplianceThe contract requires the preparation and submission of hazard warning labels in full compliance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and the Defense Federal Acquisition Regulation Supplement clause DFARS 252.223-7001, ensuring that all hazardous or regulated materials are properly labeled and documented. This includes the development of accurate and up-to-date Safety Data Sheets (SDS) to meet federal regulatory requirements for chemical safety and information dissemination across the defense supply chain. The work must align with established government standards for hazard classification, labeling elements, and SDS formatting to support safe handling, storage, and transportation of controlled substances. This subcontract is issued under the NAICS code 541690, which pertains to other scientific and technical consulting services, and is managed by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 20, 2026, with a firm response deadline of July 28, 2026. Performance is expected to support military logistics and supply operations, though specific location details are not provided. Participation requires demonstrated expertise in regulatory compliance, hazardous materials management, and the ability to deliver documentation that meets stringent DOD and federal safety mandates without deviation.
Other Scientific and Technical Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541990
New
DIBBS
Military Shipment Marking and Bar-CodingThe contract requires the application of exterior container markings and bar codes in strict accordance with MIL-STD-129, ensuring all label formats, content, and placement meet military standards for shipment identification. Additionally, where applicable, permanent item identification must be implemented following MIL-STD-130N guidelines to ensure traceability and compliance across the supply chain. This effort is critical for accurate logistics handling, inventory control, and operational readiness within Department of Defense operations. The solicitation is structured as a subcontract under NAICS code 541990, open for response until July 28, 2026, and is managed by the ASC Commodities Division of the Department of Defense. There is no set-aside designation specified, and the place of performance details are not provided, though performance is expected to align with DoD logistics requirements. Interested parties must access the full solicitation through the DIBBS portal to understand submission protocols and technical expectations, ensuring all marking and identification work is completed to federal military specifications without deviation.
All Other Professional, Scientific, and Technical Services

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging and Preservation ServicesThe contract requires the packaging and preservation of fasteners in strict compliance with MIL-STD-2073-1E, ensuring all items undergo thorough cleaning and drying processes followed by thread protection using a wrap or sleeve designated by Packaging Code ZZ. Fasteners must be containerized using Unit/Intermediate Container D3 at Packing Level B to meet military standards for shipment and storage readiness. This work is part of a subcontract under the ASC COMMODITIES DIVISION of the Department of Defense, with a solicitation window open from July 20, 2026, through July 28, 2026. The North American Industry Classification System code 493190 applies, indicating services related to courier and messenger services and warehousing and storage, reflecting the logistical and preservation nature of the work. All performance must conform to military specifications without exception, and the contract is open to qualified subcontractors responding through the DLA DIBBS portal.
Other Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332721
New
DIBBS
Precision Fastener Manufacturing and SupplyThe contract requires the manufacture or supply of exactly 50 units of a close tolerance screw designated by NSN 5305-01-047-8822, engineered to meet stringent military specifications. Full traceability of materials and manufacturing processes is mandatory, ensuring each unit can be documented from raw material sourcing through final inspection. The deliverables are subject to ITAR and EAR regulations, necessitating strict compliance with export control requirements for all associated technical data, documentation, and communications. Performance is tied to defense standards, and the work falls under NAICS code 332721, indicating precision hardware manufacturing. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, under a subcontract structure managed by the ASC Commodities Division of the Department of Defense. All activities must align with federal defense procurement protocols, and the point of performance is not geographically specified, suggesting potential flexibility in production location as long as compliance and delivery obligations are met.
Precision Turned Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA standards for hazard communication regarding pins or packaging that may contain hazardous substances, mandating the provision of Material Safety Data Sheets and appropriate hazard warning labels. All elements of communication must align with federal safety regulations to ensure proper identification and handling of chemical risks associated with the products. The work is governed under NAICS code 541690 and is structured as a subcontract awarded by the ASC Commodities Division of the Department of Defense, with performance expected at a facility in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Interested parties must submit responses by the deadline of July 28, 2026, following the solicitation posted on July 20, 2026, through the DIBBS platform.
Other Scientific and Technical Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CDI SafeguardingThe contract requires implementation of NIST SP 800-171 security controls to safeguard Covered Defense Information handled by the contractor, ensuring compliance with federal cybersecurity standards for protecting sensitive unclassified information related to DoD operations. All systems and processes must be configured to meet the full scope of the NIST framework, including access control, audit accountability, incident response, and data encryption, to mitigate risks associated with unauthorized access or data breaches. The contractor is obligated to detect, report, and respond to any cyber incident involving Covered Defense Information within 72 hours of discovery, following established DoD protocols for incident reporting and forensic documentation. This subcontract, issued by the ASC Commodities Division under the Department of Defense, pertains to work performed at the place of performance in New Cumberland, Pennsylvania, with a NAICS code of 541512 indicating IT services and related consulting. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026, with no set-aside classification specified. Compliance with the contractual cybersecurity mandates is non-negotiable and directly tied to the contractor’s ability to handle federal defense information. Failure to adhere to the required controls or timely incident reporting may result in contract termination, penalties, or loss of eligibility for future DoD work.
Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Shipping of Defense SuppliesThe contract requires the transport and delivery of packaged defense fasteners within 144 days, adhering strictly to military shipping standards and mandatory WAWF reporting protocols. The scope encompasses both domestic and international shipping operations, ensuring timely and compliant movement of critical defense supplies to the designated performance location in New Cumberland, Pennsylvania, with the zip code 17070-5002. All logistics must align with the NAICS code 484220, which classifies the activity under truck transportation of freight. The contract is structured as a subcontract under the ASC Commodities Division of the Department of Defense, with a response deadline set for July 28, 2026, and the solicitation was posted on July 20, 2026. Compliance with defense logistics regulations and accurate documentation through WAWF are non-negotiable requirements for successful contract execution.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details