Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

This Solicitation opportunity from Government of Canada was posted on February 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Light Utility Vehicle Wheeled (LUVW) – Repair and Overhaul (R&O) – Alternators and Starters

Closed
W8486-260468International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Federal
U.S. Army Contracting Command – Anniston Army Depot (CCTA-HDA) Organic Industrial Base (OIB) Modernization Commercial Solutions Opening (CSO)
Solicitation # W911KF25SC002
The U.S. Army Contracting Command – Anniston Army Depot is issuing a Commercial Solutions Opening (CSO) under solicitation number W911KF25SC0002 to modernize its Organic Industrial Base (OIB) through the acquisition of commercial products, commercial services, and non-developmental items authorized by 10 U.S.C. §3458, as amended by Section 1823 of the National Defense Authorization Act for Fiscal Year 2026. This CSO serves as a general announcement mechanism to competitively select proposals via peer, technical, and operational review, enabling streamlined procurement under FAR Part 12 Commercial Item Procedures with fixed-price contracting. The contract vehicle is structured as a Single Award Task Order Contract (SATOC), allowing for multiple task orders to be issued against the base agreement through September 30, 2030, with no predetermined aggregate value. The award basis is best value, using a trade-off approach that considers technical merit, schedule realism, and fair and reasonable pricing rather than lowest price technically acceptable. Proposals must be submitted in two volumes: a technical proposal excluding cost information and a separate price proposal with detailed cost breakdowns, each adhering to AoI-specific formatting, submission deadlines, and electronic requirements. The scope of work spans multiple specialized Areas of Interest including minor construction requirements, a Computer Numerical Control Gantry Machining Center, solid waste disposal with a base period and four option years, material laboratory services, FM200 fire suppression inspections, test track camera system installation, and safety breathing equipment. All work is to be performed at Anniston Army Depot, Alabama, and contractors must comply with federal, state, and local laws, as well as government-defined quality and reliability standards without specific MIL-STDs listed. Proposals are evaluated on technical approach, performance schedule, and price reasonableness, with final award dependent on funding, negotiation outcomes, and alignment with the Army’s Convergent Manufacturing goals to enhance agility, digital enterprise, automation, and cybersecurity across the OIB. Submission is strictly electronic via email or designated portals per AoI, with no reimbursement for proposal costs, and all offerors must be registered in SAM.gov. While no specific security clearances or key personnel requirements are mandated, compliance with DOD STIGs for IT systems and the Procurement Integrity Act is implied, and intellectual property rights are negotiable. Contract administration is overseen by Amber Burdett and Diana Ponder, with invoicing
W6QK Acc Anad

POSTED

about 20 hours ago

DEADLINE

in about 4 years

General Info

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

*World, CAN

Set-Aside

NONE

Documents

(6)

Amendment 002 to Solicitation W8486

PDFamendment

w8486-260468---luvw---smp---ro---starters-and-alternators-rfp-eng-oct-6.pdf

PDF

W8486-260468 - Repair and Overhaul of LUVW Starters and Alternators

PDFrfp

W8486-260468 - RFP for Alternator and Starters Repair and Overhaul

PDFrfp

W8486-260468A Repair and Overhaul of Starters and Alternators for Utility Vehicles

PDFrfp

W8486-260468A Light Utility Vehicle Wheeled Repair and Overhaul RFP

PDFrfp

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
Contacts
Karen PoirierPoint of Contact

Full Description

Show more
Amendment 002 for W8486-260468-001-SV for error in quantities was uploaded, prior to contract being awarded, quantities was discovered and amended. Bidders were notified and corrected prior to any bid being awarded. File Number: W8486-260468A LUVW Repair & Overhaul Starters and Alternators PROPOSED PROCUREMENT The Department of National Defence (DND) has a requirement for Repair and Overhaul (R&O) of Light Utility Vehicle Wheeled (LUVW) Starters and Alternators, to have all necessary processes performed to return the items to a fully serviceable condition. The work includes disassembly, cleaning, inspection, repairs, overhaul, reassembly, calibration, testing, and packaging & preservation process. The following items will be required to be serviced: Starters 2920-12-390-4158, P/N: NCAGE 461151010188: D80846 175EA Alternators 2920-12-362-5308, P/N: NCAGE 6121500250:CN7Z7 110 EA, also, with a repair cost for beyond the economical repair (BER) of light utility vehicle with wheels (LUVW) The work under this requirement will be carried out over an initial period of a three (3) year period with a possible 3 (1) year option period from the effective date of the contract award. The crown retains the rights to negotiate with suppliers on any procurement. Documents may be submitted in either official language of Canada. Submission of Bids This requirement uses electronic receipt of bids by e-mail only. For details, please review the section entitled Electronic Submission of Bids in the solicitation document. Bids must be submitted by e-mail only to the following e-mail address: DLP53BidsReceiving.DAAT53Receptiondessoumissions@forces.gc.ca Debriefings Bidders may request a debriefing on the results of the bid solicitation process. Bidders should make the request to the Contracting Authority within fifteen (15) working days from receipt of the results of the bid solicitation process. The debriefing may be provided in writing, by telephone or in person.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 333994
New
International
Two (2) quantities of Ballistic Plasticine Oven
Solicitation # W8486-270930/A
The Department of National Defence is seeking two Ballistic Plasticine Ovens under Supply Arrangement E60PV-19EQUI, which is reserved exclusively for pre-qualified suppliers of laboratory and scientific equipment, parts, accessories, services, and supplies. Bids are only accepted from vendors already holding this supply arrangement, and any proposals from non-qualified suppliers will not be evaluated. The procurement follows a lowest priced responsive proposal strategy under the Canadian Free Trade Agreement and the Canada–Korea Free Trade Agreement, with the solicitation published on CanadaBuys (SAP Ariba) for 40 calendar days and open for bids for a minimum of 15 calendar days. The equipment must be delivered to Edifice 239, local 107, 2459 route de la Bravoure (COTÉ SUD), Québec, QC, G3J 1X5 within eight weeks of contract award. The technical specifications are mandatory and comprehensive: the oven must operate on a 208V to 400V, 3-phase, 50/60 Hz power supply and not exceed dimensions of 1.3m width, 1.2m depth, and 1.8m height. It must maintain a working temperature range from ambient +10°C to at least 300°C, with temperature setpoint adjustments from +20°C to +300°C and resolution of ≤0.1°C below 100°C and ≤0.5°C at or above 100°C. The oven requires two independent Pt100 Class A or better temperature sensors in redundant configuration, an adaptive PID control system with adjustable heating distribution and airflow, and a feature that delays process timing until the setpoint is reached. Internal dimensions must provide a volume between 1000L and 1100L with internal width ≥1000mm, height ≥1100mm, and depth ≥800mm. The chamber must be constructed of corrosion-resistant stainless steel with all internal components made of similar material. It must include forced air circulation via at least two circulating units with adjustable airflow, programmable temperature profiles, over- and under-temperature safety protections, and a minimum chamber load capacity of 290 kg. Only suppliers meeting all technical criteria with the lowest aggregated price will be recommended for award.
Industrial Process Furnace and Oven Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 335139
New
International
Solar Powered LED Strobe Lights
Solicitation # W8486-260728/A
The Department of National Defence is seeking solar-powered LED strobe lights with a red light output, specified under UNSPSC 39110000 and part number 3337-00001, with NCAGE code 0GWV8 or an equivalent alternative. The requirement is for delivery to two locations: 25 CFSD Montreal at 6363 Rue Notre Dame St E in Montreal, Quebec, and 7 CFSD Edmonton at 195 Ave & 82nd Street in Edmonton, Alberta. Each item is quoted per unit, and bidders proposing substitute or equivalent products must clearly identify the brand, model, part number, and NCAGE code of the alternative being offered. The Crown reserves the right to negotiate terms with any supplier during the procurement process. All documentation may be submitted in either English or French, Canada’s official languages. The solicitation, titled Solar Powered LED Strobe Lights, is identified by number W8486-260728/A and was posted on July 29, 2026, with a deadline for responses set for September 7, 2026, at 7:00 PM Eastern Time. The procurement is conducted under the Government of Canada’s federal procurement framework, managed by the Department of National Defence, with Robert Coffin serving as the primary contracting authority, reachable via robert.coffin@forces.gc.ca. The place of performance covers both Quebec and Alberta, excluding the National Capital Region. Bidders must ensure compliance with delivery specifications and provide full details for any proposed alternative product to be considered valid.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 24 days
View Details
NAICS: 541360
New
International
TBIPS - G.1. Geomatics Analyst – Level 2
Solicitation # W6369-26-X056
The Department of National Defence is soliciting the provision of three Level 2 Geomatics Analysts to support the Mapping and Charting Establishment Engineering Section for a period of three years from the date of award. Based in the National Capital Region, these resources will dedicate 240 days per year each to enhance geomatics engineering capabilities, IT infrastructure, and production workflows. Key responsibilities include the manipulation of aeronautical and geospatial data, the development of new datasets and applications, and the generation of digital aeronautical charts that adhere to Royal Canadian Air Force Operational Airworthiness requirements. This work directly supports critical programs such as the Continental Mapping and Low-Level Routes Update and the Maritime Helicopter Program, as well as various RCAF Project Management Offices. This procurement is conducted under the Task-Based Informatics Professional Services supply arrangement, restricting eligibility to Tier 1 qualified holders. A critical requirement for this contract is a minimum Secret level security clearance for both the facility and individual personnel, including adherence to a Custom Security Requirement Classification List. The solicitation, identified by number W6369-26-X056, requires proposals to be submitted to the contracting authority, Samer Fattouch, by August 24, 2026. While the contract is governed by trade agreements including CETA, CPTPP, and WTO-AGP, specific pricing and evaluation weights are not disclosed in the provided documentation.
Geophysical Surveying and Mapping Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334519
New
International
RFP- Digital Firefighting Equipment W0103-18944414 Solicitation
Solicitation # W0103-18944414
The Department of National Defence, through CFB Esquimalt’s Naval Training Group (Pacific), is soliciting digital firefighting equipment to enhance training capacity at containerized Damage Control Training Facilities under the Royal Canadian Navy’s Naval Environment Training Program. The procurement, identified by solicitation number W0103-18944414, requires the supply and delivery of specialized systems including multi-panel digital fire simulators, Portable Fire Extinguisher Trainers, smoke generators, and integrated scenario control systems, with all deliverables due no later than 9 November 2026. The contract is structured under a Lowest Price Technically Acceptable model, with technical compliance being mandatory and award based solely on the lowest evaluated price among compliant offers. All equipment must support realistic, deployable, and modernized firefighting training without requiring permanent facility modifications, and must comply with mandatory technical specifications outlined in Annex A and the Contract Security Program, including adherence to the Security Requirements Check List and Supplemental Security and Classification Guide. Performance is governed by a firm-fixed-price structure with delivery terms defined under Delivered Duty Paid (DDP) Incoterms® 2020, meaning the contractor assumes all costs and risks until delivery at designated RCN locations, primarily centered at CFB Esquimalt in Victoria, British Columbia. Contract administration requires electronic invoicing through the Sourcing and Procurement Division at 17000 STN Forces, Victoria, BC, with payments processed via direct deposit or wire transfer. Security requirements are strict: the contractor must hold an active Designated Organization Screening from Public Works and Government Services Canada, and all personnel accessing sites must possess RELIABILITY STATUS clearances. Subcontracts involving security-sensitive work require prior written approval. Environmental standards mandate reusable, returnable, or recyclable packaging, with exemptions only for hazardous material handling or temperature-controlled transport needs. The contractor is also bound by anti-forced labor provisions, international sanctions compliance, and prohibitions on contingency fees or third-party inducements. Invoices must include the Contract Reference Number, Procurement Business Number, and applicable financial codes. No U.S. military standards such as MIL-STD-129 or MIL-STD-2073 apply; Canadian procurement policies and documentation procedures govern all aspects of the contract. The offeror must submit certifications confirming eligibility under the Federal Contractors Program for Employment Equity and compliance with Canada’s Procurement Code of Conduct, with failure to certify triggering mandatory submission of an Integrity Declaration Form.
Other Measuring and Controlling Device Manufacturing

POSTED

1 day ago

DEADLINE

in 12 minutes
View Details