Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Lightweight Nylon and Fringe Supplier

Active

Federal

Response Deadline11/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract under the Department of Defense C and T Supply Chain involves the provision of raw materials for prime contractors. The selected supplier is responsible for delivering bulk lightweight nylon fabric and matching fringe that strictly adhere to MIL-DTL-2692 specifications. To ensure quality and safety, the supplier must provide comprehensive material certifications for supply chain traceability and guarantee that all materials are entirely free of mercury or mercury compounds. The project falls under NAICS code 313320 and is managed by DLA Troop Support. Performance for this contract is centered in zip code 85043, with the supplier delivering the required materials directly to the manufacturer. Interested parties should note the response deadline of November 6, 2026.

General Info

Agency

Department Of Defense → C AND T SUPPLY CHAIN

NAICS

313320 - Fabric Coating Mills

Place of Performance

AZ, 85043, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE1C1-27-Q-0141.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FLAG, INDIVIDUAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 30

subcontract

Response DeadlineNov 6

Submission deadline

Response Deadline

11/06/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → C AND T SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → C AND T SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw materials for prime contractors on DLA Troop Support C and T Supply Chain projects. Provides lightweight nylon fabric and matching fringe meeting MIL-DTL-2692 specifications. Must provide material certifications for supply chain traceability and ensure materials are free of mercury or mercury compounds. Delivers bulk fabric and fringe to the manufacturer.

Similar Contracts

Same NAICS industry code

Supply of Berry Amendment Compliant Tactical Fabrics and ComponentsThis subcontract involves the supply of raw materials and components for prime contractors working on DLA Troop Support Medical Supply Chain projects for the Department of Defense. The scope of work requires the provision of Olive Drab Green high-denier nylon or polyester fabric, matching MOLLE webbing, heavy-duty zippers, and clear medical-grade PVC or TPU specifically for the production of tear-away pouches. A critical requirement of this contract is Berry Amendment certification to ensure all materials are produced domestically. The selected supplier is responsible for delivering bulk fabric, webbing, and zippers directly to the manufacturer. The project falls under NAICS code 313320 and is managed by the Medical Supply Chain MD Surg FSF.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Air Breathing Hose Assemblies (NSN 4240-01-509-5489)This subcontract involves the manufacture or sourcing of nine air breathing hose assemblies matching the technical specifications for NSN 4240015095489. The contractor is responsible for supplying these items to prime contractors fulfilling DLA Troop Support contracts, with delivery coordinated through the First Destination Transportation program to Tracy, California. Eligible providers must possess a valid UEI and CAGE code to participate. The opportunity is categorized under NAICS code 313320 and is associated with the Department of Defense via Construction and Equipment MRO SVC I. Responses are required by November 9, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

HOSE ASSEMBLY, AIR BREA

Solicitation # SPE8E9-27-T-0344

Solicitation SPE8E9-27-T-0344, issued by DLA Troop Support Construction and Equipment MRO SVC I, is a request for the procurement of nine air breathing hose assemblies, identified by NSN 4240015095489. The contract is established under the First Destination Transportation program with delivery terms set as FOB Origin. The required delivery date is January 27, 2027, with a need ship date of October 31, 2026, and a delivery window of 54 days after the order. Inspection and acceptance will occur at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-STD-130N for military property identification. Technical and quality requirements are governed by the DLA Master List, and the contract prohibits the intentional addition of mercury to hardware. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Compliance with various FAR and DFARS clauses is mandatory, including the Buy American Act, Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

MIL-DTL-32439 Textured Nylon Cloth SupplyThis subcontract involves the supply of textured nylon cloth for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The required material must strictly adhere to MIL-DTL-32439, Type I, Class 3, Style A specifications, specifically in Green Color No. 34094 as defined by FED-STD-595. All deliveries must consist of certified rolls of cloth accompanied by material certification proving full compliance with these military standards. The project falls under NAICS code 313320 and is designated for performance in Tracy, California. Interested parties should note the response deadline of November 9, 2026, for this procurement effort.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1934

This solicitation, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of one air duct hose, identified by NSN 4720-01-306-6828. This is a small business set-aside acquisition with a required delivery period of 20 days after receipt of order, shipping FOB Destination to the USS TULSA (LCS-16). The procurement is subject to strict quality and technical standards, requiring manufacturers to maintain an inspection system compliant with ISO 9001:2015 or an equivalent standard. Offers utilizing additive manufacturing processes are ineligible for award. The contract includes significant regulatory requirements, including CMMC Level 2 certification for cybersecurity and strict adherence to ITAR and EAR export controls for technical data. Packaging and marking must comply with RP001, MIL-STD-129, and MIL-STD-2073-1E, with inspection and acceptance occurring at the point of origin. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment. The solicitation is managed by William Cooley, and responses must be submitted by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacturing of Air Duct Hose (NSN 4720-01-306-6828)This subcontract involves the manufacturing and supply of a specialized air duct hose, identified by NSN 4720-01-306-6828, for the DLA Weapons Support Fluid Handling Division to support the USS TULSA. The contractor is responsible for fabricating the hose in strict accordance with MIL-PRF-62028D and provided reference drawings, ensuring all quality control measures meet ISO 9001 standards. Compliance requirements include mandatory CMMC Level 2 certification and ITAR/EAR authorization. The final deliverable must be packaged according to MIL-STD-2073-1E, marked per MIL-STD-129, and accompanied by a Certificate of Conformance. The project falls under NAICS code 313320 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-27-Q-0084

Solicitation SPE7M4-27-Q-0084 is a firm fixed price request for quotation issued by the DLA Weapons Support Fluid Handling Division for the procurement of one air duct hose, identified by NSN 4720-01-306-6828, for the USS TULSA (LCS-16). The requirement is a small business set-aside under NAICS code 313320. Delivery is required within 132 days after receipt of order, with the place of performance located at FPO 96691. Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contractor must adhere to ISO 9001 quality standards and provide a certificate of conformance. Technical compliance is required according to specific reference drawings and performance specification MIL-PRF-62028D. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively. Inspection and acceptance will occur at the origin. Key administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with CMMC Level 2 cybersecurity certification. Additionally, the item is subject to export controls under ITAR or EAR, requiring authorized access to technical data.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-27-T-1871

Solicitation SPE7M4-27-T-1871 is a request for quotations from the DLA Weapons Support Fluid Handling Division for the procurement of 48 nonmetallic hose assemblies, identified by NSN 4720-01-121-9928. The requirement is classified as a critical application item, with an original required delivery date of January 22, 2027, and a need ship date of March 23, 2027. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution Corpus Christi, Texas. The procurement falls under NAICS code 313320 and may be eligible for automated award or the HUBZone price evaluation preference. The contract mandates strict adherence to technical and quality requirements, including the prohibition of Class I ozone-depleting chemicals. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 DLA requirements. Administrative compliance requires the use of the Wide Area Workflow system for invoicing and registration in the System for Award Management. Key regulatory clauses include DFARS 252.204-7012 for cybersecurity safeguarding, DFARS 252.225-7001 for the Buy American and Balance of Payments Program, and various FAR sections regarding destination inspection and telecommunications restrictions. Quotations are due by November 6, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-27-T-1873

Solicitation SPE7M4-27-T-1873 is a request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of 17 nonmetallic hose assemblies, identified by NSN 4720015153130. This HUBZone set-aside acquisition is managed under the First Destination Transportation program with delivery terms set as FOB Origin. The required delivery date is October 31, 2027, with a need ship date of May 24, 2027, and a delivery window of 198 days. Inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, with a specific shelf-life requirement of 120 months for Type I items. Technical and quality requirements are governed by the DLA Master List, and the use of Class I ozone-depleting chemicals is strictly prohibited. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act and safeguarding of covered defense information. Quotes must be submitted via the DIBBS portal.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-1270

Solicitation SPE7L3-27-T-1270 is a request for quotations issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of two seals, identified by NSN 5330-01-148-9648. The items must be delivered to Silverdale, Washington, with a required delivery date of October 20, 2026, or within 20 days after the order is placed. This procurement is not a small business set-aside and requires offerors to be registered in the System for Award Management. The contract mandates strict adherence to technical and quality requirements via RA001 and specifies that no asbestos is permitted in the items. Packaging must comply with MIL-STD-2073-1E and RP001, with a specific requirement for items in Federal Supply Classifications 5330/5331 to be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent UV deterioration. Marking must follow MIL-STD-129. Inspection and acceptance will occur at the destination under FAR 52.246-1. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Offerors must also comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Rubbercraft Gasket (NSN 5330-00-072-1981)This subcontract involves the supply of a critical application gasket, specifically Rubbercraft Corporation of California part number 2388-48, with NSN 5330-00-072-1981. The procurement is managed for the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency. The contract requires that the delivered item be asbestos-free in accordance with FED-STD-313 and adhere to all critical application item quality standards. The opportunity is categorized under NAICS code 313320 and was posted on October 21, 2026, with a response deadline of November 2, 2026. The primary objective is to provide these essential components to prime contractors who are fulfilling broader DLA supply contracts.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Air Duct Hose Supplier (NSN 4720-01-306-1028)This subcontract opportunity is for the supply of eight specialized air duct hoses for the DLA Weapons Support Fluid Handling Division. The required hoses must feature a 3/4 inch nominal inner diameter and a 5.0 inch nominal overall length, adhering strictly to the DLA Master List of Technical and Quality Requirements. All items must be packaged in accordance with ASTM D3951, MIL-STD-129, and RP001 standards. Eligible suppliers must maintain JCP certification and obtain ITAR/EAR export control approval. Additionally, contractors are required to be compliant with NIST SP 800-171 and CMMC Level 2 security standards. The place of performance is located in Tracy, California, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → C AND T SUPPLY CHAIN

Same awarding agency

MIL-SPEC Packaging and Distribution ServicesThis subcontract for MIL-SPEC Packaging and Distribution Services involves providing specialized military packaging, marking, and shipping for prime contractors supporting the Department of Defense C and T Supply Chain. The scope of work requires bundling insignia in plastic bags and sealed outer bags in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and ASTM standards, utilizing industrial labeling equipment to ensure all government-compliant marking is accurate. The project culminates in the delivery of 4,000 packaged insignia to Arizona Industries for the Blind located in Phoenix, Arizona. This effort falls under NAICS code 561910 and is managed through the DLA Troop Support agency.

Packaging and Labeling Services

POSTED

about 10 hours ago

DEADLINE

OCP Shoulder Sleeve Insignia ProductionThis subcontract for the Department of Defense C and T Supply Chain involves the production of 4,000 custom embroidered shoulder sleeve insignia. The manufacturer is responsible for delivering high-density embroidery with a minimum stitch count of 4,600, utilizing OCP green and black thread and applying hook fastener tape backing. To qualify for this project, the contractor must possess industrial embroidery machinery and hold certification by The Institute of Heraldry. The work supports prime contractors on DLA Troop Support projects and is categorized under NAICS code 314910, with performance taking place in zip code 85043.

Textile Bag and Canvas Mills

POSTED

about 10 hours ago

DEADLINE

Supply of TIOH-Certified Service RibbonsThis subcontract with C AND T SUPPLY CHAIN involves the manufacture and supply of 8,000 TIOH-certified service ribbons under NSN 8455-01-468-7238 for prime contractors supporting DLA Troop Support. The contractor must ensure all ribbons are produced according to Department of Defense heraldic standards and obtain official certification from The Institute of Heraldry. The agreement requires the submission of five first article samples for approval and adherence to MIL-STD-2073-1E packaging standards. All 8,000 completed award ribbons must be delivered within 120 days after the receipt of the order.

All Other Miscellaneous Textile Product Mills

POSTED

about 10 hours ago

DEADLINE

Domestic Textile Material SupplyThis subcontract opportunity with C AND T Supply Chain, under the Department of Defense, involves the procurement of raw textile materials, yarn, or woven ribbon stock. These materials are intended for prime contractors fulfilling DLA Troop Support supply contracts, specifically for the production of AWAR ribbons. All supplied materials must strictly adhere to specified color and material requirements. A critical requirement of this contract is full compliance with the Berry Amendment, necessitating that 100% of the materials be of US origin. Suppliers are required to provide formal certification of domestic origin upon delivery. The response deadline for this opportunity is November 11, 2026, with performance centered in zip code 85043.

Broadwoven Fabric Mills

POSTED

about 10 hours ago

DEADLINE

Manufacture of Service Ribbons (AWAR)This subcontract with C AND T SUPPLY CHAIN for the Department of Defense involves the full-scale manufacture of 2,000 Service Ribbons (AWAR) to support DLA Troop Support supply contracts. The contractor must fabricate the ribbons according to NSN 8455-00-257-0517 specifications, which includes the production of five first article samples. Production requires the use of industrial textile looms and materials that are fully compliant with the Berry Amendment. The final delivery of 2,000 completed ribbons must adhere to packaging and marking standards MIL-STD-2073-1E and MIL-STD-129. This project falls under NAICS code 314110, with the place of performance located in zip code 85043. The response deadline for this requirement is November 11, 2026.

Carpet and Rug Mills

POSTED

about 10 hours ago

DEADLINE

MIL-STD-129 Compliant Packaging and ShippingThis subcontract, managed by C AND T Supply Chain for the Department of Defense, involves providing specialized packaging and transportation services for prime contractors on DLA Troop Support supply contracts. The primary scope of work includes the secure packaging and labeling of flags in strict accordance with MIL-STD-129 and DLA requirements, with a specific prohibition against the use of mercury or mercury compounds in any packaging materials. The contractor is responsible for coordinating and executing the delivery of these materials to Arizona Industries for the Blind located in Phoenix, Arizona. This opportunity falls under NAICS code 488510 and requires adherence to rigorous military standards to ensure the integrity and compliance of the shipped goods.

Freight Transportation Arrangement

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Signal Flag ManufacturerThis subcontract opportunity with C AND T SUPPLY CHAIN for the Department of Defense involves the manufacture of international code alphabetic signal flags. The selected vendor must fabricate 50 finished flags using acrylic bunting in strict accordance with MIL-DTL-2692 and drawing 16696-6B, specifically including Type I, Class 1A heading. A critical requirement for this contract is that the vendor must be certified by The Institute of Heraldry. The scope of work includes the delivery of the final product along with two first article samples for comprehensive visual and dimensional examination. Interested parties must submit their responses by November 10, 2026, for performance in the 85043 zip code area under NAICS code 314910.

Textile Bag and Canvas Mills

POSTED

about 10 hours ago

DEADLINE

Military Specification Packaging and Shipping ProviderThis subcontract, issued by C AND T Supply Chain for the Department of Defense, requires a provider to perform preservation, packaging, and marking of military textile goods for prime contractors on DLA Troop Support projects. The scope of work specifically involves the processing of flags, ensuring all packaging adheres to MIL-STD-2073-1E and MIL-F-2692 standards, while marking must comply with MIL-STD-129. The contractor is responsible for providing the necessary marking equipment and utilizing mercury-free packaging materials. Logistical requirements include coordinating and delivering the finished goods to Arizona Industries for the Blind in Phoenix, Arizona. The opportunity is categorized under NAICS code 488510, with a response deadline set for November 11, 2026.

Freight Transportation Arrangement

POSTED

about 10 hours ago

DEADLINE

Acrylic Bunting Signal Flag ManufacturerThis subcontract through C AND T SUPPLY CHAIN for the Department of Defense requires the manufacture of 150 acrylic bunting signal flags. The flags must be Size 3-1/2, Designator 1, and produced in strict accordance with specification MIL-DTL-2692 and drawing 16696-11C. The manufacturer is required to utilize industrial sewing equipment and acrylic bunting fabric while ensuring full compliance with the Buy American Act. The contractor must provide two first article samples for visual and dimensional examination prior to the final delivery of the 150 completed flags. This project falls under NAICS code 314910 and is performed in zip code 85043. Interested parties must respond by November 11, 2026.

Textile Bag and Canvas Mills

POSTED

about 10 hours ago

DEADLINE

Custom Embroidered Army SES Flag ManufacturerThis subcontract involves the manufacture of 60 custom embroidered flags for the Department of the Army under the DLA Troop Support C and T Supply Chain. The project requires the use of industrial embroidery machinery to produce flags from lightweight nylon with Type II headings and fringe, strictly adhering to Drawing 5-1-816 and MIL-DTL-2692 specifications. All finished products are to be delivered to Phoenix, Arizona. Qualified contractors must be capable of providing CMMC Level 2 self-assessment support to meet security requirements. The opportunity is categorized under NAICS code 314910, with a response deadline set for November 6, 2026.

Textile Bag and Canvas Mills

POSTED

about 10 hours ago

DEADLINE

Supply of Military-Grade Acrylic BuntingThis subcontract involves the procurement of military-grade acrylic bunting fabric to support prime contractors on DLA Troop Support C and T Supply Chain projects. The selected provider must source and deliver bulk fabric that strictly adheres to the material requirements of MIL-DTL-2692, providing a quantity sufficient for the production of 702 size 4 flags. The contract mandates full compliance with the Buy American and Balance of Payments Program and requires formal material certification for MIL-DTL-2692. Managed under the Department of Defense, the project falls under NAICS code 313310 and specifies a place of performance in zip code 85043.

Textile and Fabric Finishing Mills

POSTED

about 10 hours ago

DEADLINE

Manufacturing of International Code Signal FlagsThis subcontract involves the manufacturing of 702 alphabetic international code signal flags for prime contractors supporting DLA Troop Support C and T Supply Chain projects. The flags must be fabricated from acrylic bunting material according to Size 4 dimensions, specifically a 4 foot 4.5 inch hoist and fly. Production must adhere to Type I, Class 1A heading specifications as outlined in drawing 16696-6B and MIL-DTL-2692. The contractor is required to utilize industrial sewing equipment and maintain strict compliance with the Buy American and Balance of Payments Program. This Department of Defense project falls under NAICS code 314910, with performance taking place in zip code 85043. The final deliverable consists of 702 completed signal flags.

Textile Bag and Canvas Mills

POSTED

about 10 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-27-T-0950

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

CLOSED

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-27-T-0945

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

CLOSED

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-27-T-0976

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS