Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Lower Wing / Elevon Heater Carriages

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The NASA Shared Services Center is forecasting a likely recompete for the procurement of Lower Wing and Elevon Heater Carriages. The current contract, held by CJI Process Systems, Inc., is valued at 142,900 dollars and is expected to end on December 8, 2026. This requirement is classified under NAICS code 333242 and utilizes a firm fixed price pricing structure. The work will be performed in Edwards, California, and was previously competed under simplified acquisition procedures. Interested parties should note that while the RFQ and Statement of Work are available, technical drawings are provided only upon request to entities capable of receiving encrypted emails and handling Controlled Unclassified Information. Primary coordination for this opportunity is managed by Tracy Bremer and Will Garrett.

General Info

NASA forecasts a recompete for Lower Wing and Elevon Heater Carriages in California.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

NAICS

333242 - Semiconductor Machinery Manufacturing

Place of Performance

Edwards, CA, 93523, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 8

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Contacts2 people available

OfficeSTENNIS SPACE CENTER, MS, 39529, USA

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressSTENNIS SPACE CENTER, MS, 39529, USA

Contacts

Tracy Bremer

contact@example.gov

Will Garrett

contact@example.gov

Full Description

Show more

Predicted recompete opportunity based on federal award data.
Current Contract: 80NSSC26P1685 Incumbent: CJI PROCESS SYSTEMS, INC. Contract Value: $142,900 Potential End Date: 2026-12-08T00:00:00.000Z Competition: COMPETED UNDER SAP Pricing: FIRM FIXED PRICE Classification: recompete-likely (Confidence: medium - 55/100)

See attached RFQ, SOW, and QandA
**Drawings are only available by request. Requestor must be able to receive encrypted e-mails and be capable of recieving/viewing CUI data.**

Similar Contracts

Same NAICS industry code

Supply of Fuel System Runner (NSN 8145016188173)This subcontract involves the procurement of 18 units of the Runner component, identified by NSN 8145016188173 and part number HM032-064-1, to support prime contractors for DLA Troop Support supply contracts. The components must be manufactured according to Robertson Fuel Systems specifications and delivered to DLA Distribution San Joaquin in Tracy. The agreement mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, the provider must comply with DFARS 252.204-7012 cybersecurity standards. The contract falls under NAICS code 333242 and is associated with the Department of Defense.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 6 hours ago

DEADLINE

Supplier of Aircraft Filter Elements (NSN 1730015289951)This subcontract involves the supply of 12 specialized aircraft filter elements, specifically part number CSE-044004 under NSN 1730015289951, to support prime contractors fulfilling Department of Defense supply contracts. The selected supplier must adhere to strict DLA quality standards for aircraft components and provide valid UEI and CAGE codes to ensure regulatory compliance. The contract requires the delivery of the 12 units FOB Origin within 167 days after the order is placed. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 333242. Interested parties must submit their responses by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 6 hours ago

DEADLINE

Direct Action Shock Absorber SupplierThis subcontract opportunity is for the manufacture or procurement of 45 direct action shock absorber assemblies under NSN 2510-01-663-3913. The project supports prime contractors for the Department of Defense, specifically within the DLA Weapons Support Land Supplier Opns Vehicle SPT agency. All deliverables must adhere to strict DLA technical requirements and be delivered to the performance location in Tracy, California. The contract is designated as a Total Small Business Set-Aside under NAICS code 333242. Interested parties must be registered in both the System for Award Management and the Wide Area Workflow system to be eligible. The response deadline for this solicitation is November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Shaft Assembly, Flexible (NSN 3040-01-256-2256)This subcontract involves the procurement of one Flexible Shaft Assembly under NSN 3040-01-256-2256 for prime contractors supporting DLA supply contracts. The selected provider is responsible for manufacturing or sourcing the part in strict accordance with specified technical requirements, with a particular prohibition against the use of unauthorized additive manufacturing. The contractor must ensure all items are packaged and marked according to DLA standards before delivery to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. This requirement is managed by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Vehicular Component Bracket Supply (NSN 2590016916589)This subcontract involves the supply of 114 vehicular component brackets, identified by NSN 2590016916589, to support prime contractors fulfilling DLA supply contracts. The selected provider is responsible for manufacturing or sourcing these parts to ensure they meet all required technical specifications. Performance will take place in Tracy, California, under the oversight of the Department of Defense and the DLA Weapons Support LSO Combat Vehicles and Armament. To be eligible, contractors must maintain an active SAM registration and a valid CAGE code. Strict adherence to DFARS and DLAD regulations is mandatory for the duration of the agreement. The solicitation was posted on October 27, 2026, with a response deadline set for November 9, 2026, falling under NAICS code 333242.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Plain Rod End BearingsThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, involves the procurement or manufacture of 21 plain rod end bearings identified by NSN 3120011310153. The supplier is responsible for providing these components to prime contractors on Department of Defense projects, with the option to utilize approved additive manufacturing processes. The contract requires strict compliance with First Destination Transportation program requirements and specifies delivery terms as FOB Origin. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 333242. The response deadline for this opportunity is November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Vehicular Universal Joints (NSN 2520014597041)This subcontract involves the supply of vehicular universal joints under NSN 2520014597041 to support prime contractors delivering on DLA supply contracts. The Department of Defense, specifically the DLA Weapons Support Land Supply Chain, requires hardware that meets strict technical specifications, which may be produced using traditional manufacturing methods or approved additive manufacturing processes. All delivered components must be transported to designated government facilities. Compliance with NIST SP 800-171 DOD Assessment Requirements is mandatory for this engagement. The opportunity is categorized under NAICS code 333242, with a response deadline set for November 12, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Grooved Pulleys (NSN 3020015124577)This subcontract involves the manufacture and supply of grooved pulley components, specifically identified by NSN 3020015124577, to support prime contractors fulfilling Department of Defense requirements for the DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work requires the use of precision machining for groove cutting and boring to ensure all parts meet strict DLA technical specifications and NIST SP 800-171 security standards. The agreement stipulates that the physical components must be delivered FOB Origin within a 21-day timeline. Classified under NAICS code 333242, the contract was posted on October 27, 2026, with a response deadline of November 10, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Positive Clutch Replacement Parts SupplyThis subcontract, managed by the Navsup Weapon Systems Support Mech under the Department of Defense, involves the supply of certified replacement parts for the Positive Clutch, specifically NSN 7HH 3010-01-266-6858. The scope of work includes providing internal components, seals, and hardware to prime contractors supporting Navy repair contracts. All deliverables must adhere to the Technical Data Package requirements and be sourced from domestic or qualifying country end products in compliance with the Trade Agreements Act. Additional requirements include the provision of Unique Item Identifiers for any items with a value of $5,000 or more. The opportunity is categorized under NAICS code 333242, with a response deadline set for November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supply of Sleeve Bearings (NSN 3120014786135)This subcontract involves the supply of 34 sleeve bearings under National Stock Number 3120014786135 for prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The selected provider is responsible for manufacturing or sourcing parts that strictly adhere to technical specifications and performing all necessary quality control measures. All items must be packaged according to RP001 DLA Packaging Requirements for Procurement and delivered via Government-Arranged Transportation. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 333242.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Flexible Coupling Hub (NSN 3010-01-595-5489)This subcontract involves the procurement and delivery of one Flexible Coupling Hub, identified by NSN 3010015955489, for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supply Chain. The selected provider must ensure the part adheres to the DLA Master List of Technical and Quality Requirements and follows L31 Additive Manufacturing guidelines if additive processes are utilized during production. The contract requires the delivery of a single unit via FOB Origin within a strict 20-day timeline. Performance is centered in Beaufort, South Carolina, under NAICS code 333242. Interested parties must respond by November 5, 2026, to meet the requirements of this Department of Defense acquisition.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Wheel End Assemblies (NSN 2530-01-660-1230)This subcontract involves the supply of four Wheel End Assemblies to prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. The required items must match Columbus Jack Corporation part number 9649-46 and NSN 2530-01-660-1230. Delivery is set for FOB Origin to the DLA Distribution DDSP New Cumberland Facility. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E, MIL-STD-129, RP001, and IP056. Additionally, the supplier is required to ensure full compliance with 29 CFR 1910.1200 and maintain mercury-free preservation standards. The opportunity is categorized under NAICS code 333242, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Environmental Regulatory Review and ARARS Analysis SupportThis subcontract, titled Environmental Regulatory Review and ARARS Analysis Support, involves providing technical review and regulatory compliance services for prime contractors operating at the NASA Wallops Flight Facility. The scope of work focuses on the evaluation of LTM reports, RI work plans, and SI reports, alongside the review of PFAS monitoring and treatability reports. A critical component of the role is identifying Commonwealth of Virginia ARARS for Response Actions and conducting on-site visits to audit these actions. The successful provider must possess deep expertise in CERCLA and a comprehensive understanding of Virginia hazardous waste laws to deliver technical comment memos and ARARS documentation. Managed through the NASA Shared Services Center, the performance of these services will take place in Wallops Island, Virginia, under NAICS code 541620.

Environmental Consulting Services

POSTED

about 11 hours ago

DEADLINE

On-site System Installation and User TrainingThis subcontract, managed by the NASA Shared Services Center for the National Aeronautics and Space Administration, involves the on-site installation and user training for the DSA100E system at the Langley Research Center in Hampton, Virginia. The selected provider will be responsible for the physical setup, unpacking, and installation of the system, ensuring all instrument checks meet KRUSS specifications to deliver a fully commissioned and calibrated system. A critical requirement for this engagement is that the provider must hold factory-trained KRUSS certification. In addition to the technical setup, the contractor is required to provide between four and eight hours of operational training for prime contractors to ensure personnel are proficient in using the equipment. The solicitation was posted on October 28, 2026, with a response deadline of October 30, 2026, under NAICS code 811210.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 11 hours ago

DEADLINE

Desktop Instrument Control Module (COMPDESK)The Desktop Instrument Control Module subcontract, managed by the NASA Shared Services Center, provides specialized laboratory workstations for prime contractors operating on projects at the NASA Langley Research Center in Hampton, Virginia. Each workstation consists of a configured desktop computer and a 22 inch HD monitor, featuring Windows 11 Pro 64 bit, 16GB of RAM, and a 256GB SSD. To ensure immediate operational readiness, all systems come pre-installed with KRUSS ADVANCE software and are backed by a two year manufacturer warranty. This procurement falls under NAICS code 334111 and is designed to support technical instrument control requirements within the agency's research facilities.

Electronic Computer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Kruss ADVANCE Software ModulesThis subcontract, managed by the NASA Shared Services Center, provides proprietary software licenses for prime contractors working on projects at the NASA Langley Research Center in Hampton. The scope of work includes the delivery, installation, and activation of specific software modules, namely AD3221 for Contact Angle, AD3223 for Surface and Interfacial Tension, and AD62 for Surface Free Energy. To ensure operational functionality, the software must be fully compatible with DSA100E hardware and provide comprehensive support for Young-Laplace models. The procurement falls under NAICS code 513210 and is designated for the support of specialized research and analysis within the agency.

Software Publishers

POSTED

about 11 hours ago

DEADLINE

Kruss Dynamic Surface Analyzer (DSA100E) SupplyThis subcontract through the NASA Shared Services Center involves the procurement and installation of a Kruss Dynamic Surface Analyzer DSA100E for prime contractors supporting projects at the NASA Langley Research Center in Hampton. The requirement is for a fully automatic, software-controlled contact angle goniometer consisting of a CF04 High Resolution/High Speed Camera, a CM3200 Optical system with manual zoom, and an FM3200 Standard frame. The delivered hardware system must be fully operational and meet specific technical performance standards, including a measuring range of 0.01 to 2000 mN/m with a resolution of 0.01 mN/m. This acquisition falls under NAICS code 334516 and is intended to provide critical measurement capabilities for agency research initiatives.

Analytical Laboratory Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

Quantum Support Contract ReinstatementThis subcontract, issued by the NASA Shared Services Center, focuses on the administrative processing and fee payment required to reinstate lapsed Quantum support contracts for prime contractors. The primary objective is to ensure continuity of coverage for specified hardware through the validation and processing of reinstatement fees. Eligible providers must hold Authorized Quantum Partner or Reseller status to perform these services. The opportunity was posted on October 28, 2026, with a response deadline of November 4, 2026, falling under NAICS code 541519.

Other Computer Related Services

POSTED

about 11 hours ago

DEADLINE

Onsite Installation of Quantum Customer Replaceable Units (CRUs)This subcontract involves the physical onsite installation and configuration of Quantum Customer Replaceable Units for prime contractors supporting the NASA Shared Services Center at the Glenn Research Center. The scope of work specifically covers libraries with up to six drives, adhering to Bronze 5x9xNBD standards to ensure the delivery of fully operational hardware components. Due to the nature of the facility and the technology involved, personnel must maintain ITAR and EAR compliance and obtain personal identity verification for site access. The project is categorized under NAICS code 811219, with a response deadline set for November 4, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 11 hours ago

DEADLINE

Quantum Scalar 3 Library Maintenance and Support ServicesThe Quantum Scalar 3 Library Maintenance and Support Services subcontract provides annual Bronze level technical support and maintenance for prime contractors operating on NASA Shared Services Center projects at the Glenn Research Center. The scope of work includes managing 5x9xNBD CRU support for specific hardware, including 3U Control Modules, 25-Slot Upgrades, and LTO8 Half Height Tape Drive Modules, while ensuring the delivery of active annual coverage and necessary replacement parts. Operating under NAICS code 811219, the contract requires strict adherence to ITAR and EAR export controls to maintain security and regulatory compliance. This agreement ensures the continued operational efficiency of critical data storage infrastructure through dedicated technical maintenance and hardware support.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 11 hours ago

DEADLINE

Vertrod Thermal Impulse Pneumatic Heat Sealer SupplierThis 8(a) sole source subcontract through the NASA Shared Services Center involves the procurement of two Vertrod 48 PS Thermal Impulse Pneumatic Pivot Style Heat Sealer Machines for prime contractors operating at the NASA-Stennis Space Center. The required equipment must feature 48 inch seal lengths in both 3/8 inch and 1/2 inch widths, single side heater bars, and pneumatic low pressure jaw close safety systems. To meet operational standards, all machines must be compatible with ISO7 clean room environments. The supplier is responsible for delivering two fully configured and tested units, which include a 3 year limited warranty. This procurement falls under NAICS code 333993 and was posted on October 28, 2026, with a response deadline of November 2, 2026.

Packaging Machinery Manufacturing

POSTED

about 11 hours ago

DEADLINE

ISO 14952 Level 300A Precision CleaningThis small business set-aside subcontract involves providing high-level technical cleaning services for prime contractors supporting the NASA Shared Services Center. The primary objective is the precision cleaning of filter components to meet ISO 14952 latest revision level 300A standards, ensuring that all parts are free of residue and particle contamination for use in space-flight environments. To achieve these rigorous specifications, the contractor must utilize cleanroom facilities or specialized chemical cleaning baths. All delivered components must be accompanied by ISO 14952 Level 300A certification. This opportunity falls under NAICS code 811310 and is specifically designated as a total small business set-aside.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 11 hours ago

DEADLINE

Hydrostatic and Pneumatic Pressure Testing ServicesThis small business set-aside subcontract involves providing specialized hydrostatic and pneumatic pressure testing services for prime contractors supporting the NASA Shared Services Center. The scope of work requires the use of high-pressure rigs capable of exceeding 6000 PSI to conduct hydrostatic tests at 1.5 times the maximum allowable working pressure and pneumatic tests at 1.1 times the maximum allowable working pressure. Additionally, the contractor is responsible for performing non-destructive testing and inspections for nominal operating loads in strict accordance with ASME Boiler and Pressure Vessel Codes. All completed work must be documented through the delivery of certified test data and QC07 Evidence of Test reports.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 11 hours ago

DEADLINE

Supply of Norman Filter Company Repair Kits (P/N: KIT-45-588-M)This small business set-aside subcontract involves the procurement and delivery of Norman Filter Company repair kits, part number KIT-45-588-M, to support prime contractors on NASA Shared Services Center projects at the Kennedy Space Center. The required kits must be constructed from 316/316L Stainless Steel conforming to AMS QQ-S-763, featuring PTFE O-rings and wire pleated woven wire mesh. To ensure safety and quality, all supplies must adhere to the ASME Boiler and Pressure Vessel Code and maintain a 4:1 Burst Pressure Safety Factor. The successful contractor is required to provide both a Manufacturer’s Certificate of Compliance and Pressure Vessel Certification. The solicitation was posted on October 28, 2026, with a response deadline of November 4, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

six-circle diffractometer

Department Of Commerce Nist

POSTED

over 1 year ago

DEADLINE

CR2032 Standard Kits & Components

Solicitation # 5-B187-Q-00501-00

Argonne National Labor - DOE Contractor

POSTED

over 1 year ago

CLOSED

over 1 year ago

Sources Sought Wirebond Pull Tester

Department Of Commerce Nist

POSTED

over 1 year ago

DEADLINE

Photoresist Direct Write Lithography System

Naval Research Laboratory

POSTED

over 1 year ago

DEADLINE

Dry Pumps, Kashiyama Model MU100GP, Ebara Model ESR20N, or equivalent

Department Of Commerce Nist

POSTED

over 1 year ago

DEADLINE

Department Of Commerce Nist

POSTED

over 1 year ago

DEADLINE

Wafer Grinder and CMP Tools

Solicitation # N0017325QMB04

Naval Research Laboratory

POSTED

over 1 year ago

CLOSED

over 1 year ago

IPG 20KW Laser Collimator

Solicitation # N6426725Q4025

Naval Surface Warfare Center

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

IPG 20KW Laser Collimator

Solicitation # N6426725Q4025

DEPT OF THE NAVY

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

Supply of HP Collimator for IPG 20 kW Laser System

Naval Surface Warfare Center

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

Ion Beam Etch System Supply and Integration

Argonne National Labor - DOE Contractor

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

Ion Beam Etch System

Solicitation # 4-B175-Q-00762-00

Argonne National Labor - DOE Contractor

POSTED

almost 2 years ago

CLOSED

almost 2 years ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS