Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Maintenance and Calibration of NEX CGI EXREF XRF Analyzer

Active

Federal

Response Deadline11/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing on-site maintenance, calibration, and technical support for the Applied Rigaku Technologies NEX CGI EXREF Energy Dispersive X-Ray Fluorescence Analyzer. Supporting prime contractors on Environmental Protection Agency National Enforcement Investigation Center projects, the selected provider will perform preventative maintenance and troubleshooting using specialized diagnostic tools and XRF calibration standards. The contractor must hold a certification from Applied Rigaku Technologies to ensure the equipment is serviced to standard. Key deliverables include a fully calibrated XRF analyzer and detailed service reports. This opportunity falls under NAICS code 811210 and is associated with the Environmental Protection Agency.

General Info

Certified maintenance, calibration, and technical support for EPA Rigaku XRF analyzer equipment.

Agency

Environmental Protection Agency → Lead

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of 68HERL27Q0008.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NEX CGII EDXRF Energy Dispersive X-Ray Analyzer

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 19

subcontract

Response DeadlineNov 3

Submission deadline

Response Deadline

11/03/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyEnvironmental Protection Agency → Lead

ContactsNo contacts available

OfficeN/A

Organization / AgencyEnvironmental Protection Agency → Lead

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs on-site maintenance, calibration, and technical support for prime contractors on EPA National Enforcement Investigation Center projects. Conducts preventative maintenance and troubleshooting of the Applied Rigaku Technologies NEX CGI EXREF (Energy Dispersive X-Ray Fluorescence) Analyzer using specialized XRF calibration standards and diagnostic tools. Requires certification by Applied Rigaku Technologies. Delivers a calibrated XRF analyzer and service reports.

Similar Contracts

Same NAICS industry code

G15-703408 - Vsign Annual Service

Solicitation # SRC0000037275

This solicitation, identified as G15-703408, is issued by the Alabama Department of Transportation, G15 Transportation Planning, for annual Vsign service and hardware maintenance for CCS sites. The contract is governed by the State of Alabama Office of the Chief Procurement Officer's Standard Terms and Conditions for Quick Quotes. The total contract value is capped at 25,000 dollars, covering the original agreement and any subsequent renewals. The period of performance allows for annual renewals by written agreement of both parties for a maximum total duration of five years from the effective date. Suppliers must submit responses electronically through the Alabama Buys portal by the deadline of October 26, 2026. Key requirements for bidders include certifications of tax compliance pursuant to Section 41-4-142 of the Code of Alabama 1975 and certification that the entity and its principals are not debarred or suspended from government participation. The contract stipulates that the supplier acts as an independent contractor and agrees to the jurisdiction of the City of Montgomery for any legal disputes. Additionally, the state reserves the right to request professional licenses, insurance certificates, or manufacturer authorizations following the bid opening.

Alabama Department of Transportation, G15 Transportation Planning

POSTED

about 21 hours ago

DEADLINE

SKID Truck and Pavement Sensor CalibrationThis subcontract involves the calibration of Force Plate SKID trucks and pavement sensors to support prime contractors on Texas Department of Transportation pavement testing projects. The primary objective is to ensure the measurement accuracy of data collection equipment and sensors used for evaluating road conditions, with the final deliverables consisting of calibrated equipment and formal certification reports. The opportunity is categorized under NAICS code 811210 and is associated with the Texas Department of Transportation. Interested parties should note that the response deadline is November 4, 2026, following a posting date of October 21, 2026.

Texas Department of Transportation

POSTED

about 21 hours ago

DEADLINE

MFP Maintenance and Repair ServicesThis subcontract for MFP Maintenance and Repair Services supports prime contractors managing print projects for the City of Dothan in Alabama. The scope of work involves performing both preventive and corrective maintenance on multi-function printers, including on-site repairs and the provision of loaner or replacement units within 24 hours if a device cannot be fixed immediately. The service provider is required to use diagnostic tools to maintain a strict hardware fleet standard, ensuring a minimum uptime of 98% per device each quarter. This contract emphasizes strict adherence to service level agreement uptime guarantees to ensure continuous operational efficiency for the agency.

POSTED

about 22 hours ago

DEADLINE

Flap Skew Detection Unit Overhaul ServicesThis subcontract for Flap Skew Detection Unit Overhaul Services involves performing comprehensive teardown, evaluation, repair, and reassembly of specialized units for prime contractors supporting NAVSUP Weapon System Support projects. The scope of work includes disassembling units, cleaning and inspecting components according to approved repair manuals, and replacing any parts that exceed established limits. To ensure quality and functionality, the contractor must utilize provided fixtures, jigs, and test equipment to verify that each unit reaches Ready for Issue status. All work must be performed in strict compliance with IPC/EIAJ-STD-001C and MIL-STD-454 standards. The project is based in Philadelphia and falls under NAICS code 811210. The final deliverable for this Department of Defense effort is a certified Ready for Issue unit.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 1 month

Repair and Modification of Thrust Shoe w/InstrThis subcontract involves the teardown, evaluation, repair, and modification of Thrust Shoe w/Instr (NSN 016233028) for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The selected provider must be an authorized distributor of the original manufacturer and is required to disassemble and assess assets using precision tooling and technical orders in accordance with CAGE 75333 and Ref No. 482480-008. The primary objective is the delivery of a fully repaired and modified asset that meets all specified functional requirements. This opportunity falls under NAICS code 811210, with a response deadline set for November 4, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Precision Cleaning and Testing (MIL-STD-1330)This subcontract involves providing precision cleaning and testing services for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work focuses on executing Oxygen Clean processes for various shipboard components, including those used in oxygen, helium, helium-oxygen, nitrogen, and hydrogen systems. The contractor must utilize certified precision cleaning facilities to ensure the total absence of contaminants in accordance with MIL-STD-1330 standards. The final deliverables include certified Oxygen Clean filter components accompanied by formal certification of cleanliness. This opportunity falls under NAICS code 811210.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Motorola Astro Core P25 Specialized Maintenance & RepairThis subcontract opportunity is for the Motorola Astro Core P25 Specialized Maintenance and Repair project supporting the Department of Veterans Affairs at the Palo Alto Health Care System. The selected contractor will be responsible for performing both regular preventative maintenance and emergency repairs on the Motorola Astro Core P25 radio infrastructure to ensure continuous system functionality. A critical requirement of the contract is the provision of 24/7 emergency callback support with a mandatory three-hour response time, resulting in a fully operational communication system and detailed maintenance logs. The procurement is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 811210. Managed by the Network Contract Office 21, the project is located in Palo Alto. Interested parties must submit their responses by November 4, 2026.

261-NETWORK Contract Office 21 (36C261)

POSTED

DEADLINE

Alcon Constellation LXT & Embedded Laser Maintenance ServicesThis subcontract involves providing specialized maintenance services for Alcon Constellation LXT Phacoemulsification units and embedded lasers at the Long Beach VA Medical Center. The scope of work includes performing preventative maintenance inspections according to OEM frequencies, executing corrective repairs, providing technical support, and installing necessary software updates. To ensure operational readiness and regulatory compliance, the contractor must provide 24-hour on-site response times and deliver service reports that meet Joint Commission standards. The project is managed under the Department of Veterans Affairs, specifically through Network Contract Office 22. Qualified providers must utilize Alcon-certified technicians with a minimum of two years of experience. The contract falls under NAICS code 811210 and is designated for performance in Long Beach, California.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Digital Computer Depot-Level RepairThis subcontract for Digital Computer Depot-Level Repair involves the physical repair and testing of C-5 Digital Computer units to support prime contractors on US Air Force projects. The scope of work includes executing depot-level hardware and software repairs utilizing specialized test benches and diagnostic software to ensure all units meet strict interface requirements. Additionally, the contractor is responsible for configuration management to track the status of all repairs and must deliver fully functional, tested computer units. The project is managed under the Department of Defense through agency FA8538 Afsc Pzaab, with performance taking place in Warner Robins, Georgia. Interested parties must ensure compliance with DFARS 252.204-7012 regulations. The opportunity was posted on October 21, 2026, with a response deadline of November 20, 2026, falling under NAICS code 811210.

FA8538 Afsc Pzaab

POSTED

DEADLINE

F-15 DMS Processor and Cartridge RepairThis subcontract, titled F-15 DMS Processor and Cartridge Repair, involves the testing and repair of specialized avionics processing units and data cartridges for prime contractors supporting Air Force Sustainment Center F-15 Digital Mapping System projects. The scope of work specifically includes the maintenance of Advanced Display Core Processors, Digital Map Processors, Mission Cartridges, and Theatre Cartridges. To successfully deliver these fully repaired and tested components, the contractor must utilize specialized test equipment and maintain access to production-level technical data. Managed by the Department of Defense under agency FA8538 Afsc Pzaab, the work is designated under NAICS code 811210 and will be performed in Warner Robins. The opportunity was posted on October 21, 2026, with a response deadline of November 5, 2026.

FA8538 Afsc Pzaab

POSTED

DEADLINE

Belimed Sterilizer and Washer Preventive Maintenance & Repair (PM&R)This subcontract involves providing planned maintenance inspections and corrective repair services for SteelcoBelimed sterilizers and washers at the VA Southern Arizona Health Care System. The selected vendor must be a certified Belimed provider capable of using OEM-specific diagnostic tools to ensure all equipment meets manufacturer specifications. Key deliverables include the restoration of fully operational equipment, detailed maintenance logs, and comprehensive service reports. Managed under the Department of Veterans Affairs Network Contract Office 22, the project falls under NAICS code 811210. The opportunity was posted on October 21, 2026, with a response deadline of October 28, 2026. The contractor will work as a subcontractor to prime contractors to maintain critical sterilization and washing infrastructure.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

UHF DMR Tier III System Maintenance ServicesThis subcontract for the Department of Veterans Affairs involves providing comprehensive maintenance, semiannual preventive services, and unscheduled repairs for UHF DMR Tier III systems within VA healthcare facilities. The scope of work includes the testing, calibration, and troubleshooting of Avtec radio communications systems as well as Tait repeaters and Motorola MOTOTRBO portable and mobile radios. To ensure system integrity, the contractor must provide factory-trained technicians who possess direct access to original equipment manufacturer software and calibration tools. The primary objective is to deliver a fully operational UHF DMR system supported by detailed maintenance logs. This opportunity falls under NAICS code 811210 and is managed by the Network Contract Office 8. Interested parties should note the response deadline of October 28, 2026.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

More opportunities from Environmental Protection Agency → Lead

Same awarding agency

NEX CGII EDXRF Energy Dispersive X-Ray Analyzer

Solicitation # 68HERL27Q0008

Solicitation 68HERL27Q0008 is a notice of intent for a sole source negotiated agreement to provide a one-year on-site service agreement for an Applied Rigaku Technologies NEX CGII Energy Dispersive X-Ray Fluorescence (EDXRF) Analyzer. The service will be performed at the EPA National Enforcement Investigation Center in Lakewood, Colorado, where the instrument is used to analyze forensic samples for civil and criminal investigations. The Environmental Protection Agency intends to award the contract to Applied Rigaku Technologies under FAR Part 12, as the original manufacturer possesses the proprietary equipment and specialized training required to maintain and repair the complex instrument. The period of performance is one year from the date of award, with the solicitation posted on October 19, 2026, and a response deadline of November 3, 2026. The procurement falls under NAICS code 334516 for Analytical Laboratory Instrument Manufacturing. Harold Day serves as the Contracting Officer, and payments are administered through the EPA office in Washington, DC. While the government intends to sole source the requirement, interested parties may challenge this intent by providing detailed evidence of their capabilities, qualifications, and itemized pricing within 15 calendar days of the notice.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

MICA Specialized Training DeliveryThe MICA Specialized Training Delivery subcontract involves providing specialized technical training services for prime contractors supporting Environmental Protection Agency MICA projects. The scope of work focuses on the delivery of comprehensive training programs and sessions under NAICS code 611430. The performance window for these services is scheduled from September 29, 2026, to October 14, 2026. The primary objective of the contract is the successful delivery of the completed training program to the lead agency.

Professional and Management Development Training

POSTED

DEADLINE

On-site Advanced Asbestos Fiber Analysis Training

Solicitation # 68HERL26Q0069

The U.S. Environmental Protection Agency intends to award a sole-source firm-fixed-price purchase order to Peter M. Cooke (UEI XKDPDB4BMHN6) for specialized onsite training. The scope of work involves an onsite microscopy course titled Advance Asbestos Identification using Polarized Light Microscopy, as well as selected subjects from the MICA course Quantitative Asbestos Analysis. This training is scheduled to take place from September 29, 2026, to October 14, 2026. The procurement is categorized under NAICS code 541990. As this is a notice of intent to award a sole-source contract, no formal solicitation is available, and the notice does not serve as a request for proposals. Interested parties wishing to demonstrate competition feasibility were required to contact the contracting officer, Andrea Courtney, within 10 calendar days of the notice.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS