Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of The Treasury was posted on June 30, 2021. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Maintenance and Repair for BPS 3000 and BPS 2000 Inspection Equipment

Closed
2031ZA21N00044Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541330
New
Federal
INDEFINITE DELIVERY/INDEFINITE QUANTITY MULTIPLE AWARD CONTRACT FOR MULTIDISCIPLINE ARCHITECT-ENGINEER SERVICES IN SUPPORT OF CONSTRUCTION PROJECTS LOCATED PRIMARILY IN THE NORFOLK DISTRICT AREA OF RESPONSIBILITY (AOR)
Solicitation # W9123626R1CCA
The U.S. Army Corps of Engineers Norfolk District is soliciting proposals for a Multiple Award Task Order Contract (MATOC) Indefinite Delivery/Indefinite Quantity (IDIQ) for multidiscipline Architect-Engineer services. This unrestricted procurement, conducted under the Brooks Act, seeks approximately six highly qualified firms to provide design, planning, and engineering support for Civil Works and Military Construction projects. The contract has a total combined fee ceiling of 240 million dollars over a five-year base ordering period, with an estimated start date of June 2027. While primarily supporting the Norfolk District Area of Responsibility, capacity may be shared with the North Atlantic Division and other Department of War Agencies upon approval. Award decisions are based on technical qualifications evaluated through SF 330 submissions, focusing on professional qualifications, capacity to manage up to five concurrent task orders, past performance, knowledge of the local area, and experience with alternate delivery methods. Key personnel must hold active professional licensure in a U.S. state or territory. Large business awardees are required to submit a comprehensive subcontracting plan with specific goals for various small business categories. Task orders will be issued as firm-fixed price contracts, with a maximum value of 50 million dollars per order and a guaranteed minimum of 5,000 dollars per contractor.
W2SD Endist Norfolk

POSTED

about 6 hours ago

DEADLINE

in 14 days
NAICS: 541330
New
Federal
FTSS V Maritime COMS RFP
Solicitation # N6134026R1014
Solicitation N6134026R1014 is a Request for Proposal issued by the NAWC Training Systems Division for a recompete of Maritime Contractor Operations and Maintenance Services (COMS). The effort involves providing operations and maintenance for Naval Aviation Simulators at Naval Air Station Jacksonville, Florida, and Naval Air Station Whidbey Island, Washington. This requirement is being awarded as a Task Order under the Fielded Training Systems Support (FTSS V) contract and is limited exclusively to Lot 1 MAC holders. The contract utilizes a Firm Fixed Price structure for mobilization and performance, with the potential for a six-month extension per FAR 52.217-8. The government will employ a streamlined evaluation process under FAR 16.507, utilizing a tradeoff between evaluated prices and the Technical Factor, specifically the Staffing Approach. The Technical Factor is designated as significantly more important than price. Additionally, offerors must be rated acceptable in Small Business Participation to be eligible for award, with large businesses required to commit to a minimum small business participation goal of 8.0 percent of the total price. Proposals must be submitted electronically via the PIEE Solicitation Module, with a technical volume limited to 15 pages. Awardees are required to maintain CMMC Level 1 cybersecurity self-assessments and comply with DFARS 252.204-7012 safeguarding requirements.
Nawc Training Systems Division

POSTED

about 6 hours ago

DEADLINE

in 15 days
NAICS: 541330
New
Federal
C1AZ--657A4-26-125 Conduct Roof Deck Assessment Building 8 ME FY27 NRM
Solicitation # 36C25526R0183
The Department of Veterans Affairs Network Contracting Office 15 is requesting Standard Form 330 qualifications packages for architectural and engineering services to conduct a roof deck assessment at Building 8 of the John J. Pershing VA Medical Center in Poplar Bluff, Missouri. This procurement is 100 percent set-aside for Service-Disabled Veteran-Owned Small Business firms and is being conducted in accordance with the Brooks Act and FAR Subpart 36. The objective of the assessment is to evaluate the deterioration of the concrete roof deck and supporting welded steel bar joists, identify structural deficiencies and water infiltration, and recommend immediate life-safety mitigations and long-term repairs. The anticipated contract will be a Firm Fixed Price award with a design completion period of approximately 100 calendar days. The scope of work includes visual inspections, concrete sounding, non-destructive reinforcement scanning using Ground Penetrating Radar or electromagnetic locators, and an integrity assessment of steel bar joists and masonry parapets. Deliverables range from preliminary layouts and design development submissions to final bid documents provided in PDF, Auto-CAD 2025, and Revit formats, as well as final as-built drawings. Selection will be based on professional qualifications, specialized experience in active healthcare facilities, capacity to accomplish the work, past performance, and estimating effectiveness. Interested firms must submit their electronic SF 330 package, including a design quality management plan and a signed certification of compliance regarding subcontracting limitations, by October 28, 2026, at 2:00 PM Central Time.
255-NETWORK Contract Office 15 (36C255)

POSTED

about 6 hours ago

DEADLINE

in 14 days
NAICS: 541330
New
Federal
RFP for Advanced Signatures Technologies (AST)
Solicitation # N0016726R3104
The Department of the Navy, Naval Surface Warfare Center, Carderock Division (NSWCCD), is soliciting Advanced Signatures Technologies (AST) Support Services under the SeaPort-NxG Multiple Award Contract. This total small-business set-aside requirement focuses on integrating emerging software technologies into existing systems-of-systems to support naval signatures tactical guidance, training, and synthetic simulation. The scope of work includes advancements in Big Data processing, cloud computing, predictive data analytics, and the development of software capabilities for data storage, simulation, and visualization for systems both afloat and ashore. The contractor must utilize Agile and DevSecOps methodologies, adhering to Intelligence Community data standards and strict cybersecurity requirements. The contract is structured with a five-year period of performance, consisting of a one-year base period and four one-year option periods. Pricing is based on Cost-Plus-Fixed-Fee (CPFF) for labor and cost-only for other direct costs (ODCs). Award will be determined based on best value, with technical approach being the most important factor, followed by past performance and cost. Due to the nature of the work, all personnel must be U.S. citizens with at least a Secret clearance, and the contractor must comply with rigorous security specifications, including those detailed in DD Form 254 for access to SCI and other classified networks.
Nswc Carderock

POSTED

about 6 hours ago

DEADLINE

in 12 days
NAICS: 541330
New
Federal
Draft RFP for DRPM RAS ME RAS 1.0 and MCM RAS 2.0 Professional Support Services
Solicitation # N0016426R3003_DRAFT
The Naval Surface Warfare Center Crane Division is issuing a draft SeaPort-NxG solicitation for professional support services to assist the Direct Reporting Portfolio Manager for Robotic and Autonomous Systems. The scope of work focuses on acquisition and life cycle support and management for the RAS 1.0 Mission Enablers and RAS 2.0 Mine Countermeasures program offices. This requirement is a 100 percent small business set-aside under NAICS code 541330, restricted to current SeaPort-NxG MAC holders. Performance is required across multiple CONUS locations, including Arlington, Washington DC, and San Diego, as well as OCONUS locations in Singapore and Bahrain. The government intends to award a cost-plus-fixed-fee contract based on a best-value determination using a trade-off process. Evaluation is based on three factors: technical approach, management, and personnel (most important), past performance (pass/fail), and cost realism. Key deliverables include monthly status and financial reports and cyber incident information reports, with quality monitored via a Quality Assurance Surveillance Plan. Proposals must be submitted through the PIEE Solicitation Module and must adhere to strict page limitations and formatting requirements. Contractors are also required to provide an organizational conflict of interest mitigation plan and maintain registration in the System for Award Management.
Nswc Crane

POSTED

about 6 hours ago

DEADLINE

in 9 days

General Info

NAICS

541330 - Engineering Services

Place of Performance

DC, 20028, USA

Set-Aside

SBA

Documents

1

BPS+PWS.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of The Treasury → Office Of The Chief Procurement Officer
Contacts2 people available
OfficeWASHINGTON, DC, 20228, USA
Office AddressWASHINGTON, DC, 20228, USA
Contacts
Ladousca Mitchell

Full Description

Show more
Maintenance and Repair for BPS 3000 and BPS 2000 Inspection Equipment This is a Sources Sought Notice for a Market Research ONLY to determine the availability of small businesses. This NOTICE is for informational planning purposes only and it should not to be construed as a commitment by the Government for any actual procurement of materials, machinery, or services. The purpose of this NOTICE is to gain knowledge of potential small business sources interested in providing services for Maintenance and Repair for BPS 3000 and BPS 2000 Inspection Equipment. This NOTICE does not constitute a solicitation or a promise of a solicitation in the future and does not commit the Government to a contract for any supply or service. Respondents are advised that the Government will not pay for any information or administrative costs incurred in response to this NOTICE. All costs associated with responding to this NOTICE are solely at the responding parties expense. No proprietary, classified, confidential, or sensitive information should be included in your response. The Government reserves the right to use any non-proprietary technical information in any resultant solicitation(s). If so, respondents are solely responsible for properly marking and identifying such information within their responses. Responses to this Notice are not offers and cannot be accepted by the Government to form a binding contract or agreement. The Bureau of Engraving and Printing (BEP) will not be obligated to pursue any particular acquisition alternative as a result of this Notice. Responses to this Noticed will not be returned. Not responding to this Notice does not preclude participation in any future solicitation, if one is issued. This is a non-personnel services contract to provide Maintenance and Repair for BPS 3000 and BPS 2000 Inspection Equipment. The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government. Bureau of Engraving & Printing Office of the Chief Procurement Officer Attn: LaDousca Mitchell, Contract Specialist or Alejandro Bulux, Contract Officer 301 14th Street, SW Washington, D.C. 20228-0001 Email responses to this Notice shall be sent to the attention of individuals listed above. Respondents are requested to submit the aforementioned Capability Statement to the point of contact identified below by no later than 12:00 PM Eastern Time, 9 July, 2021. The following information shall be included: Business type (large business, small business, small disadvantaged business, 8(a)-certified small disadvantaged business, HUBZone, woman-owned small business, veteran-owned small business, service-disabled veteran-owned small business), Indian Economic Enterprises (IEE), or Indian Small Business Economic Enterprises (ISBEE)) based upon North American Industry Classification System (NAICS) code 541330, Engineering Services. Please refer to Federal Acquisition Regulation FAR 19 for additional detailed information on Small Business Size Standards. The FAR is available at https://www.acquisition.gov/browse/index/far As outlined below, companies should provide a brief description of their capabilities and other related details in support of this potential requirement. A short summary describing their capabilities to provide these products and services. Please provide information on your organization in the following areas: - Company Name - Company Mailing Address - Points of Contact (email address, phone number) - Socio-economic information (business size, women-owned, Indian -owned, veteran owned, etc.) as it relates to NAICS Code 561210 Facilities Support Services - If you are an Indian-Owned company (in accordance with the Buy Indian Act 25 USC 47 and DIAR Regulations) - Cage code - DUNS number - Capability to provide requirement - Summary of the types of services performed and experience as it relates to this requirement - Other relevant market information

More opportunities from Department Of The Treasury → Office Of The Chief Procurement Officer

Same awarding agency

NAICS: 541990
New
Federal
Maintenance Service for Portable Fire Extinguishers - BPA
Solicitation # 2031ZA27Q00004
Solicitation 2031ZA27Q00004 is a request for quotations for a single-award, firm fixed-price Blanket Purchase Agreement (BPA) to provide portable fire extinguisher maintenance services for the Bureau of Engraving and Printing (BEP) DC Facility. The contract is a total small business set-aside under NAICS 541990. The period of performance is five years, spanning from December 1, 2026, through November 30, 2031. The scope involves the inspection, maintenance, testing, repair, and replacement of approximately 1,000 portable fire extinguishers across the BEP main and annex buildings in Washington, D.C. Services will be managed through annual BPA calls for inspections and as-needed calls for specific repairs or replacements. The contractor must be ICC/NAFED certified and adhere to NFPA-10 and OSHA 29 CFR Part 1910 standards. Key technical requirements include six-year teardowns, hydrostatic testing at five or twelve-year intervals, and the provision of metal valve replacement extinguishers. An annual equipment report is required within 48 hours of service completion. Award will be granted to the lowest-priced, technically acceptable offer with no adverse past performance. Evaluation is based on the completeness of the technical approach and the level of risk associated with the proposal. Offerors must submit their quotes in two volumes: a technical capability volume and a pricing volume using the provided pricing sheet. Submissions must be made by October 30, 2026. The contractor is required to maintain worker's compensation, general liability, and automobile liability insurance. All payment requests must be processed electronically through the Invoice Processing Platform (IPP).
All Other Professional, Scientific, and Technical Services

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 236220
Federal
Cooling Tower, Roofing, and Structural Construction
Solicitation # 2031ZA26R00027
Solicitation 2031ZA26R00027 is a design-build project issued by the Bureau of Engraving and Printing for the assessment, demolition, and replacement of cooling towers and associated infrastructure at the District Currency Facility Main Building in Washington, DC. The scope of work includes replacing two Evapco cooling towers and one BAC tower, along with the associated structural steel platforms, roofing, mechanical, electrical, and SCADA control systems. The project requires lead-based paint abatement and adherence to IPC, ASHRAE, ASME, and National Electrical Code standards. The estimated contract value ranges between 1 million and 5 million dollars, with a performance period not to exceed 730 calendar days from the notice to proceed. This is a total small business set-aside under NAICS 236220. The government will utilize a best value trade-off methodology for award, where non-price factors—specifically corporate experience and past performance—are weighted more heavily than the technical approach, key personnel, project plan, and price. Proposals must be submitted in two separate volumes, with the technical volume limited to 15 pages. Per Amendment 0001, the response deadline has been extended to November 9, 2026. Awarded contractors must provide a performance bond for 10 percent of the contract amount and comply with Davis-Bacon Wage Determinations.
Commercial and Institutional Building Construction

POSTED

13 days ago

DEADLINE

in 19 days
View Details
NAICS: 561210
Federal
WASTEWATER PRETREATMENT PLANT OPERATION AND MAINTENANCE SERVICES
Solicitation # 2031ZA26R00023
The Bureau of Engraving and Printing is soliciting firm-fixed-price contractor services for the 24/7 management, operation, and maintenance of the Industrial Wastewater Pretreatment Plant at its Washington, DC facility. The scope of work encompasses four primary systems: the Wiping Solution Wastewater Pretreatment Plant, the Plating Wastewater Pretreatment Plant, the Grease Trap Wastewater Pretreatment Plant, and the Wiping Solution Recycling Plant, as well as an on-site laboratory and materials storage area. The contractor is responsible for technical support, storm water activities, and the procurement of specific process chemicals and materials, including sodium hydroxide, sulfuric acid, and sodium bisulfite, while adhering to strict environmental, health, and safety standards and DC Water discharge permits. This 8(a) set-aside contract consists of a phase-in period and a base year running from November 1, 2026, through October 31, 2027, with four optional 12-month extension years. The total contract ceiling is estimated between 8.1 million and 9.1 million dollars. Award evaluation may be based on either a trade-off method, where technical capability and past performance are significantly more important than price, or a lowest price technically acceptable basis. Key deliverables include monthly workforce reports and the implementation of a quality management system, with labor categories ranging from program and plant managers to laboratory technicians and maintenance staff.
Facilities Support Services

POSTED

15 days ago

DEADLINE

in 6 days
View Details
NAICS: 561730
Federal
DCF Snow and Ice Removal Services
Solicitation # 2031ZA27Q00002
The Bureau of Engraving and Printing is soliciting a firm-fixed-price purchase order for snow and ice removal services at the District Currency Facility in Washington, D.C. This total small business set-aside under NAICS 561730 requires the contractor to provide all personnel, equipment, and materials to ensure safe access and egress to the main and annex buildings. The period of performance consists of one base year starting November 20, 2026, with four subsequent option years, extending the potential contract through November 19, 2031. The contractor must maintain 24/7 operational readiness from November 20 through April 20 each year to perform seasonal readiness, ice control, snow removal based on accumulation levels, and off-site snow hauling. Award decisions are based on a tradeoff between technical capability and approach, past performance, and price, with technical and past performance factors being significantly more important than price. Additionally, offerors must demonstrate compliance with Treasury APU 26-01, including a certification that the small business prime contractor will perform at least 51 percent of the cost of contract performance for personnel. The contractor is responsible for developing a Quality Control Plan within 30 days of award and must adhere to strict security protocols, including the prohibition of weapons on BEP premises and the use of visible identification badges. Invoicing is managed electronically through the Invoice Processing Platform.
Landscaping Services

POSTED

15 days ago

DEADLINE

in 9 days
View Details
NAICS: 541990
Federal
Maintenance Service for Portable Fire Extinguishers
Solicitation # 2031ZA27Q00001
Solicitation 2031ZA27Q00001 is a request for quotation issued by the Department of the Treasury, Bureau of Engraving and Printing, for portable fire extinguisher maintenance services at its Washington, D.C. facilities. This is a 100 percent small business set-aside under NAICS 541990. The contract is a firm-fixed-price purchase order consisting of one base year and four option years, with a total duration not to exceed 60 months. Services are to be performed annually in December and include the inspection, testing, repair, and replacement of approximately 1,000 portable fire extinguishers in accordance with NFPA-10 and OSHA 29 CFR Part 1910 standards. Specific requirements include annual tagging, six-year teardowns for dry chemical extinguishers, and hydrostatic testing every five years for CO2 types and twelve years for dry chemical types. The government will award the contract to the lowest priced, technically acceptable offeror with no adverse past performance. Offerors must submit quotes in two separate volumes: a technical capability volume limited to 10 pages and a pricing volume. To be eligible, contractors must be ICC/NAFED certified and maintain worker's compensation, general liability, and automobile liability insurance. An optional site visit is scheduled for October 15, 2026, and the deadline for quote submission is October 22, 2026, at 3:00 PM ET. Payment will be processed electronically via the Invoice Processing Platform in accordance with the Prompt Payment Act.
All Other Professional, Scientific, and Technical Services

POSTED

16 days ago

DEADLINE

in 1 day
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS