Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on August 14, 2019. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Maintenance and Repair of commercial kitchen equipment

Closed
W911S2-19-U-DFEQFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 3 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
RFP 07-135 Roseville Electric Utility – Air Compressor Maintenance
Solicitation # 07-135
The City of Roseville is soliciting proposals under RFP 07-135 for a consultant to provide comprehensive scheduled preventive and corrective maintenance for air compressors and auxiliary systems, including Ingersoll Rand equipment. The services will be performed at the Roseville Energy Park and Sunset Energy Center in California. The selected consultant will be responsible for providing all necessary labor, technical expertise, specialized tooling, and materials. This is a prevailing wage project with an initial contract duration of five years, estimated to commence in April or May. Proposals must be submitted by December 16, 2026, via email to the City Clerk or through physical delivery in a sealed container with the required Attachment H label. The award will be based on a formal evaluation panel process considering the firm's experience and qualifications (25 points), the proposed project plan (35 points), and cost (40 points), with potential interviews for top candidates. Requirements for the successful bidder include obtaining a City of Roseville business license, providing 100% faithful performance and labor and materials bonds, and maintaining specific insurance policies. Consultants must also disclose any conflicts of interest and adhere to the Levine Act regarding political contributions.
City of Roseville

POSTED

about 6 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Roseville Electric Utility – Gas Compressor Maintenance
Solicitation # 07-137
The City of Roseville is soliciting proposals for Gas Compressor Maintenance Services to support the Roseville Energy Park and the Roseville Energy Center and RPEAK. The selected contractor will provide all labor, supervision, technical expertise, specialized tooling, equipment, and materials necessary for both scheduled preventive and corrective maintenance on natural gas compressors, specifically Gas Packagers and Ariel models, and their associated auxiliary systems. The contract is intended to run for an initial term of five years, with services estimated to commence in April or May. This is a prevailing wage project requiring adherence to all fair employment laws, with certified payroll required for contracts exceeding 25,000 dollars. The successful proposer must provide a 100 percent Faithful Performance Bond and a 100 percent Labor and Materials Bond. Proposals are due by December 17, 2026, and must include a Proposer’s Certification, a Non-collusion Declaration, a Levine Act Disclosure Statement, and proof of active registration with the California Secretary of State. Award will be made to the responsible proposer determined to be the most advantageous to the City through a formal evaluation panel process. Invoicing is to be submitted monthly, delineated by task and personnel, with payment terms set at 30 days following receipt of satisfactory services.
City of Roseville

POSTED

about 6 hours ago

DEADLINE

in about 2 months

General Info

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Fort Drum, FORT DRUM, NY, 13602, USA

Set-Aside

NONE

Documents

4

DRAFT_PWS_Final_DFAC_Equipment_Maintenance.pdf

PDF

SSS_-_smallbusiness-DFAC_equipment_maint-repair.pdf

PDF

Technical_Exhibit_A-Example_listing_of_equipment.pdf

PDF

Technical_Exhibit_B-Example_listing_of_equipment.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-Ft Drum
Contacts1 person available
OfficeFORT DRUM, NY, 13602-5220, USA
Office AddressFORT DRUM, NY, 13602-5220, USA
Contacts
Ernie IxtlahuacContract Specialist

Full Description

Show more
SOURCES SOUGHT THIS IS A Sources Sought Notice ONLY. The U.S. Government desires to procure scheduled and unscheduled maintenance, and repairs of commercial kitchen equipment on a small business set-aside basis, provided 2 (two) or more qualified small businesses respond to this sources sought synopsis with information sufficient to support a set-aside. Your responses to the information requested will assist the Government in determining the appropriate acquisition method, including whether a set-aside is possible. We encourage all small business concerns, in all socioeconomic categories (e.g., 8(a) Business Development Program, Small Disadvantage Business (SDB), Historically Underutilized Business Zone(HUBZone), Service-Disabled Veteran-Owned Small Business (SDVOSB), Women-Owned Small Business concerns (WOSB)), to identify their capabilities in meeting the requirement at a fair market price. This notice is issued solely for information and planning purposes - it does not constitute a Request for Quote (RFQ), Invitation for Bid (IFB), Request for Proposal (RFP) or a promise to issue a RFQ, IFB or RFP in the future. This notice does not commit the U.S. Government to contract for any supply or service. Further, the U.S. Government is not seeking quotes, bids or proposals at this time and will not accept unsolicited proposals in response to this sources sought synopsis. The U.S. Government will not pay for any information or administrative costs incurred in response to this notice. Submittals will not be returned to the responder. Not responding to this notice does not preclude participation in any future RFQ or IFB or RFP, if any is issued. If a solicitation is released, it will be synopsized on the Governmentwide Point of Entry (GPE). It is the responsibility of potential offerors to monitor the GPE for additional information pertaining to this requirement. BACKGROUND: The service shall provide labor, supplies, and equipment required to perform scheduled and unscheduled maintenance, and repairs of commercial kitchen equipment on Fort Drum, NY. All commercial kitchen equipment maintenance and supporting functions will be operated / provided in accordance manufacturer specifications and / or accepted industry standards for the safe and efficient operation of equipment repair and supporting functions The anticipated NAICS code is: 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance, Small Business size standard is $7.5 mil. A draft Performance Work Statement is provide for your better understanding of the Government's need. PURPOSE OF THIS SOURCES SOUGHT: To request information on capabilities of potential offerors to provide the services described herein to determine if this will be set-aside. While not a firm cutoff, providing responses to this announcement no later than 1:00 p.m. Eastern Standard Time (EST) on 29 August 2019 will facilitate planning and ensure your capability receives maximum consideration. Only electronic submissions will be accepted. Interested business concerns should provide a brief "capabilities statement" package (submissions are limited to no more than 25 pages in length, single spaced, and 12 font minimum) demonstrating its capabilities in reference to this requirement. A generic capability statement is not acceptable. No particular format is mandated. The Government prefers that your firm submits its response in Microsoft Word, Adobe Acrobat, or a combination of both and the document must be searchable. The capability package shall be sent by email to: Contract Specialist: Ernie Ixtlahuac Email: contact@example.gov Procuring Contracting Officer: Victoria Schermerhorn Email: contact@example.gov Your email subject line should reflect: "Firm's Name, Response to the Sources Sought Synopsis for the maintenance and repair of commercial kitchen equipment at Fort Drum, NY, W911S2-19- U-DFEQ. The size limit of each email, with all attachments, cannot exceed 9 megabytes (MB) due to the Government's email system restrictions. DO NOT SEND ZIPPED files as the Government's information network will remove all zipped files. In response to this sources sought, please provide: 1. A company profile to include name of your firm, point of contact, phone number, email address, number of employees, annual revenue history, CAGE code, and DUNs number. Respondents must also indicate whether they qualify as a Small Business, SDB, 8(a), EDWOSB, WOSB, HUBZone, or SDVOSB. 2. In responding to this synopsis, provide what you believe are the key tasks that need to be accomplished to be successful to conduct maintenance and repair of commercial kitchen equipment at Fort Drum, NY. In essence, what key tasks should be used for determining minimum capability. 3. Identify whether your firm is interested in competing for this requirement as a prime contractor. If you are subcontracting any of the services out, contemplating a Joint Venture, and/or creating a teaming arrangement then please provide the name of these companies and what work they will be performing, if available. Please provide your company's specific experience in performing medical air evacuation services and providing comparable services. Ensure the information is in sufficient detail regarding previous experience in performing medical air evacuation services (indicate whether as a prime contractor or subcontractor) on similar requirements include the services provided. If applicable, please provide the same experience information from any Subcontracts, Joint Venture, and/or teaming partners you may propose with. 4. Identify what percentage of work will be performed by the small business prime contractor and all similarly situated entity subcontractors. Note: In accordance with FAR 52.219-14 Limitations on Subcontracting (CLASS DEVIATION 2019-O0003): "Similarly situated entity" means a first-tier subcontractor, including an independent contractor, that has the same small business program status as that which qualified the prime contractor for the award and that is considered small for the NAICS code the prime contractor assigned to the subcontract the subcontractor will perform. An example of a similarly situated entity is a first-tier subcontractor that is a HUBZone small business concern for a HUBZone set-aside. In addition, the Contractor agrees in performance of a contract for services, it will not pay more than 50 percent of the amount paid by the Government for contract performance to subcontractors that are not similarly situated entities. 5. Identify type(s)/certifications(s) of proposed subcontractors (such as SDB, 8(a), HUBZone, SDVOSB, and WOSB). 6. Information on the financial capacity of your business to meet financial obligations (i.e. payroll, payment of subcontractors, etc.). 7. Identify how the Army can best structure these contract requirements to facilitate competition by and among small business concerns. 8. Identify any condition or action that may be having the effect of unnecessarily restricting competition with respect to this acquisition. Please contact the MICC Advocate for Competition, Scott Kukes, at contact@example.gov or +1 (555) 000-0000, if you believe that this action is unreasonably restricting competition. Include the subject of the acquisition, this announcement, and the MICC POC information from the FBO notice. Provide the specific aspects that unreasonably restrict competition and the rationale for such conclusion.

More opportunities from Department Of Defense → W6QM Micc-Ft Drum

Same awarding agency

NAICS: 327310
New
Federal
BULK CEMENT FOR SILO
Solicitation # W911S227U0091
Solicitation W911S227U0091 is a Firm Fixed Price contract for the supply and delivery of approximately 1,500,000 lbs of Bulk Portland Cement, General Concrete Construction, Type 1L Gray Color, without air entraining features. The material must meet ASTM C595 and AASHTO M 240 standards and be delivered to the west side silo at the McAlester Army Ammunition Plant in Oklahoma. This is a Total Small Business Set-Aside with a 12-month period of performance starting no earlier than November 9, 2026. To be eligible, contractors must be located within a 200-mile radius of the McAlester Ammunition Plant and submit offers on an F.O.B. destination basis. Deliveries must be made using self-unloading pneumatic trucks with a 4 inch connection located 4 feet off the ground, with all deliveries occurring between 0700 and 1500 hours. The contractor must be capable of delivery on demand within two days of notification. Each delivery requires a Certificate of Conformance and a Safety Data Sheet. Award will be based on the most advantageous offer considering price and technical factors. All quotes must be submitted through the PIEE Solicitation module and include a completed Attachment 1 regarding certifications and country of origin. The contract incorporates various FAR and DFARS clauses, including Buy American requirements and specific cybersecurity reporting standards.
Cement Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
Federal
Automated Traffic Enforcement Trailer
Solicitation # W911S226U4411
Solicitation W911S226U4411 is a Total Small Business Set-Aside for the procurement of a complete, towable, autonomous mobile traffic enforcement trailer and laser-based measuring system for the Department of Defense at Fort McCoy, Wisconsin. The primary requirement is for one Automated Traffic Monitoring System Trailer, specifically the POLISCAN Speed FM1 or an approved equal, capable of tracking multiple vehicles across at least four adjacent traffic lanes to enforce speed limits and red-light violations. The contract includes a requirement for eight hours of on-site operator training at Fort McCoy and a minimum 12-month comprehensive manufacturer's warranty. All equipment must be new, and the system must be calibrated to federal and state standards to ensure data is legally admissible in court. The award will be granted to the responsible offeror whose proposal is most advantageous to the government based on price and technical evaluations. Delivery is required F.O.B. Destination to Fort McCoy, with a preferred delivery window of 30 days. Offerors must submit their proposals via the PIEE Solicitation module, including technical, price, and past performance documentation. A critical requirement for responsiveness is the completion of Attachment 1 regarding certifications and the identification of the country of origin. The contract incorporates various regulatory clauses, including Buy American preferences, cybersecurity reporting under DFARS 252.204-7012, and prohibitions on certain telecommunications equipment.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 7 days
View Details
NAICS: 321991
New
Federal
Tiny Home
Solicitation # W911S227U0094
Solicitation W911S227U0094 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the provision and installation of a prebuilt modular tiny home for personnel housing in Upstate New York. This acquisition is a Total Small Business Set-Aside under NAICS code 321999. The required unit must be designed for year-round, four-season occupancy, with a minimum size of 480 square feet and maximum exterior dimensions of 13 feet 8 inches by 39 feet 7 inches. It must accommodate at least four occupants, including one queen bed and one set of twin bunk beds, and utilize a NEMA-rated enclosure for 50-amp electrical service. Only new equipment is acceptable, and the unit must comply with all applicable federal, state, and local codes, including NFPA standards for fire suppression and extinguishers. The government will evaluate offers based on price and technical factors, awarding the contract to the responsible offeror whose proposal is most advantageous. As a brand name or equal solicitation, those offering equal products must provide detailed brand, model, and descriptive literature, along with any planned modifications. Quotes must be submitted exclusively through the PIEE Solicitation module to avoid being rejected as nonresponsive. A critical requirement for submission is the completion of Attachment 1 regarding certifications and country of origin. Delivery is preferred within 30 days on an F.O.B. destination basis. Final acceptance requires witnessing by a Fire Protection Engineer and the submission of all relevant testing reports and closeout documentation.
Manufactured Home (Mobile Home) Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 14 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS