Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

MANIFOLD ASSEMBLY, H

Active
SPE7M3-26-T-7858Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of three hydraulic manifold assemblies identified by NSN 4730-01-669-8492 and part number 85060087, furnished by Delta Power Hydraulic Co, under solicitation SPE7M3-26-T-7858. Delivery is required within 104 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The items must be packaged per ASTM D3951 and labeled according to MIL-STD-129, with palletization strictly adhering to DLA Packaging Requirements for Procurement. All packaging and labeling must reflect the specified unit of issue and quantity per unit pack as outlined in the contract. The DLA Master List of Technical and Quality Requirements supersedes any conflicting standards, including ASTM D3951. The contract explicitly prohibits the intentional introduction of mercury or mercury-containing compounds into the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specifically authorized by NAVSEA, with portable mercury-containing devices requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. Class I ozone-depleting chemicals are strictly banned from all supplied items, overriding any specification requirements unless the replacement chemical is explicitly permitted by the specification or approved by the contracting authority. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for November 30, 2026. All technical and quality requirements are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on the acquisition size. The point of contact for inquiries is William Cain of the Department of Defense’s Fluid Handling Division.

General Info

Procure three hydraulic manifolds, deliver to New Cumberland by Nov 30, 2026, per DLA packaging and mercury/ozone rules.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

326122 - Plastics Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7M3-26-T-7858.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
William Cain
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MANIFOLD ASSEMBLY,H
MANIFOLD ASSEMBLY, HYDRAULIC.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
DELTA POWER HYDRAULIC CO 30058 P/N 85060087
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M3-26-T-7858
SECTION B
PR: 7017226160 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017226160 0001 EA 3.000
NSN/MATERIAL:4730016698492
DELIVERY (IN DAYS):0104
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:11/30/2026 Original Required Delivery Date:11/30/2026
SPE7M3-26-T-7858 NSN/Part Number: 4730-01-669-8492 Quantity: 3 EA Purchase Request: 7017226160QTY: 3 Delivery: 104 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326122
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE7M3-26-T-7849
The contract is for one unit of a machine thread plug identified by NSN 4730-01-696-9906 under solicitation SPE7M3-26-T-7849, with a response deadline of August 17, 2026 and a delivery requirement of 20 days after contract award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by whether the acquisition is simplified or large, and whether any solicitation amendments have been issued. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The item is subject to strict prohibitions against Class I ozone-depleting chemicals, which override any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly authorized. Tailored higher-level contract quality requirements apply to both manufacturers and non-manufacturers, and inspection and acceptance may occur at the origin. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, including foreign nationals working for U.S. entities, and requires prior authorization from the Department of State or Commerce. Access to the controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed the required DOD training and questionnaire and have received DLA approval. The place of performance is Mechanicsburg, Pennsylvania, 17050-2411, and the point of contact is William Cain of the Fluid Handling Division within the Department of Defense.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
ADAPTER, STRAIGHT, PI
Solicitation # SPE7M3-26-T-7844
The contract pertains to the procurement of four straight adapters, part number 4730-01-699-3772, under solicitation SPE7M3-26-T-7844, with a delivery requirement of 20 days after award. The item is governed by stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and the drawing is source-controlled, meaning only the listed approved sources may supply the item unless otherwise authorized. Offerors seeking to qualify future products must contact the cognizant design activity noted on the drawing. The contract prohibits the use of Class I ozone-depleting chemicals in any delivered items, overriding any conflicting specifications without relaxing product performance requirements, and mandates that substitutes be pre-approved. Sampling for quality assurance must comply with MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at predefined levels unless stated otherwise in governing documents. Configuration changes require formal engineering change proposals and variance requests, and all technical data associated with the item is subject to export controls under ITAR or EAR, with distribution restricted to contractors who have obtained JCP certification, completed required DLA training, and received explicit authorization. The contracting office is the Defense Logistics Agency’s Fluid Handling Division, with performance occurring in San Diego, California, and inquiries directed to William Cain at the provided contact details.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
REDUCER BODY, TUBE
Solicitation # SPE7M3-26-T-7846
The contract is for one unit of a reducer body tube with NSN 4730-01-678-0409 and part number AL4009349, awarded under solicitation SPE7M3-26-T-7846. Delivery is required within 20 days of contract award, with FOB origin terms and inspection and acceptance occurring at the destination. The item must comply with MIL-STD-2073-1E packaging standards, including specific packaging methods, materials, and marking requirements per MIL-STD-129, with no special marking code applied. Palletization must adhere to DLA packaging requirements, and all materials must strictly avoid ozone-depleting chemicals and mercury or mercury-containing compounds, except for specified functional uses like batteries, fluorescent lights, and certain instruments as outlined by NAVSEA, which also mandate shock-proof construction and secondary containment for portable mercury-containing devices. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The item is sourced from General Dynamics Ordnance and Tactical or Flyer Defense, LLC, and the delivery destination is identified as Smith Barracks in Baumholder, Germany, with transportation procedures governed by DLAD procedural notes C19 and C20. The purchase request number is 7017744559, and the required delivery date is August 3, 2026.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
NIPPLE, SPECIAL
Solicitation # SPE7M3-26-T-7845
The contract specifies the procurement of a NIPPLE,SPECIAL with NSN 4730-01-644-7554 and part number 0209713, requiring delivery of one unit within ten days under the solicitation number SPE7M3-26-T-7845. Delivery is FOB origin with zero tolerance for quantity variance and inspection and acceptance occurring at the destination. Strict prohibitions forbid the use or incorporation of any Class I ozone depleting chemicals, overriding all specification requirements without waiving product performance standards; any substitute chemicals require prior approval unless already authorized. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s RP001 requirements, and all labeling and marking must follow the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM standards. The unit of issue is each (EA), packaged one per unit (QUP: 001), and must be shipped by the fastest traceable means, excluding parcel post, to the designated government freight address in Huntsville, Alabama. The required delivery date is August 3, 2026, and the contract mandates strict adherence to government-specific identifiers and tracking codes including RDD 555, project code 9GQ TP 3, and supplier code W31LPY. All documentation must reference the DLA’s official unit of issue data and technical quality standards as published on their authorized website.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
ELBOW, PIPE TO TUBE
Solicitation # SPE7M0-26-T-031M
The contract is for one unit of an elbow fitting, specifically a pipe to tube component identified by NSN 4730-01-299-7309 and part number 16-12CTX-B from Parker-Hannifin Corporation, under solicitation SPE7M0-26-T-031M. Delivery is required within five days of award, with shipment to be made FOB origin in accordance with strict packaging standards including ASTM D3951 and MIL-STD-129 labeling, while adhering to DLA’s Master List of Technical and Quality Requirements which override any conflicting specifications. The item must not contain any Class I ozone-depleting chemicals, and any substitute materials require prior approval unless explicitly permitted by specification. Packaging must comply with DLA’s procurement guidelines including palletization standards, and the unit of issue is a single ea with no tolerance for quantity variance. Delivery destination is the Marine Wing Support Squadron 272 in Jacksonville, North Carolina, with all shipments required to use the fastest traceable transport method, explicitly prohibiting parcel post. The original required delivery date is July 24, 2026, and all government-specific identifiers, including the project code TP 1 and freight tracking number, must be accurately applied to the shipment.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
ELBOW, TUBE TO BOSS
Solicitation # SPE7M1-26-U-5052
This contract specifies the procurement of an elbow fitting, tube to boss, identified by NSN 4730-01-331-8713 and part numbers from approved manufacturers including Deere & Company, Parker-Hannifin Corporation, Eaton Aeroquip LLC, Danfoss Power Solutions II LLC, and SAE International, all conforming to SAE J1453-3 standards. The requirement is for 22 packing groups, with each packing group containing ten units, totaling 220 items. The contract is issued under solicitation SPE7M1-26-U-5052 as a total small business set-aside, with delivery scheduled within 42 days of award, FOB origin, and inspection and acceptance occurring at destination. All materials must comply with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, and zero ozone-depleting chemicals are strictly prohibited. Packaging must adhere to ASTM D3951, MIL-STD-129 labeling, and DLA packaging requirements, including palletization per RP001, with no variance allowed in quantity. The unit of issue is packing group, and pricing is fixed at $22.00 per unit, with total estimated value reflecting the full quantity.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 326122
New
DIBBS
Precision Plastic Component Manufacturing
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
Hose Nipple Supply and Packaging
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M0-26-T-029V
The contract is for the procurement of a metallic tube with NSN 4710-01-682-4309 and purchase request number 7017719849, requiring a quantity of six feet delivered within five days. Delivery is FOB origin with a quantity variance of plus 10 percent and minus zero percent, and inspection and acceptance occur at the destination. The product must comply with SAE AMS5647 specifications and is subject to DLA’s packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and marking codes without special identification. Ozone-depleting chemicals are strictly prohibited, and any substitute materials must be approved unless already authorized by the specification. Packaging must be palletized per DLA guidelines, and shipments must use traceable freight methods—parcel post is expressly forbidden. The delivery destination is Little Rock Air Force Base, Arkansas, and the contract mandates adherence to all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The contract is issued under solicitation SPE7M0-26-T-029V with a required delivery date of August 3, 2026, and a response deadline of August 17, 2026, under the NAICS code 326122 for the Department of Defense.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7L1-26-Q-1439
This contract is for the procurement of a metal tube assembly identified by NSN 4710-01-675-9509 and part number P5574-2 from TRANSDIGM INC, with a required quantity of 69 units to be delivered within 246 days of award. The item must strictly conform to the source-controlled drawing numbered 53711-7124755 Revision C dated 04/09/2016, and only suppliers listed on that drawing are currently approved, though additional qualified sources may exist without being reflected on the drawing. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The product must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly permitted by the specification. Mercury or mercury-containing compounds are prohibited unless used in specified functional applications such as batteries, fluorescent lights, sensors, weapon systems, or Navsea-approved reagents, in which case portable devices must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking following MIL-STD-129 and no special marking codes. Items must be palletized according to DLA standards and shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, with no variance permitted in quantity, and the contract incorporates all applicable DLA procedural notes for transportation and logistics.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 326122
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M0-26-T-031A
This contract is for the procurement of 20 units of a hose clamp, identified by NSN 4730-01-562-6063 and supplier part number 5388K24 from McMaster-Carr Supply Co, classified as a commercial off-the-shelf item. Delivery is required within five days of award, with FOB origin terms, and no quantity variance is permitted. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 and MIL-STD-129 standards, with DLA’s Master List of Technical and Quality Requirements taking precedence. The unit of issue is each, with a total price of $20.00 per unit, and the full contract is governed by DLA packaging requirements under RP001. The item must be palletized as specified, shipped via the fastest traceable method excluding parcel post, and delivered to the designated military logistics address in Hagerstown, Maryland. Shipping and marking must reference the provided DLA identifiers and contact details, including the military freight identifier W90HYJ and the government-controlled tracking code W90HYJ62110020. The required delivery date is August 4, 2026, and this solicitation is issued under contract SPE7M0-26-T-031A, with procurement under the NAICS code 326122 for the Department of Defense.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M0-26-T-030E
This contract is for the procurement of a metal tube assembly identified by NSN 4710-01-482-5087 and part number 3929466, supplied by Cummins Inc. under solicitation SPE7M0-26-T-030E. The requirement calls for a single unit to be delivered within five days of contract award, FOB origin, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which take precedence. Packaging, marking, and labeling must adhere to MIL-STD-129, and palletization must follow DLA packaging standards RP001. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The delivery must be shipped via traceable means, excluding parcel post, to the specified military address at Fort Lee, Virginia, and must be marked with the designated government control identifiers. The shipment is classified as RDD with NMCS designation and must be sent using a fast, trackable transportation service. The contract includes specific government-only codes for internal tracking and disposition, and the original required delivery date is August 4, 2026. The unit of issue is each, and while the contract lists a purchase request number, the quoted quantity is one unit with a corresponding price of one dollar. The supplier must ensure all technical and quality specifications from the DLA Master List are met, and the solicitation response is due by August 17, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332996
New
DIBBS
ELBOW, PIPE TO TUBE
Solicitation # SPE7M3-26-T-7852
The contract is for the procurement of 169 units of an elbow fitting designed to connect pipe to tube, identified by NSN 4730-00-090-8665 and part number MS51813-3, manufactured in compliance with MIL-DTL-18866K and MS51813G specifications. The item must adhere to strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, with procurement governed by full and open competition. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Delivery is required within 154 days from the contract award, with the product to be shipped FOB origin and subjected to inspection and acceptance at the destination. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 guidelines, with no special marking required and palletization aligned with DLA packaging standards. The unit of issue is each, with a fixed quantity and zero variance allowed, priced at $169.00 per unit for a total contract value of $28,561. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 19, 2027, and an original delivery deadline of January 5, 2027. Transportation details follow DLA Procurement Notes C19 and C20, and all correspondence must reference the solicitation number SPE7M3-26-T-7852.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-300Q
This contract is for a single nonmetallic hose assembly, part number P206TC0639080808-13, manufactured by Parker-Hannifin Corporation, with NSN 4720017315766. The item is classified as a restricted source requiring government engineering approval and prohibits the use of Class I ozone-depleting chemicals, with all substitutes subject to prior approval regardless of specification allowances. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking in accordance with MIL-STD-129 and palletization per RP001. The delivery is FOB origin with a strict 10-day lead time, zero variance in quantity, and inspection and acceptance occurring at the destination. The sole delivery address is the U.S. Army unit at Fort Riley, Kansas, with a required delivery date of August 3, 2026. Transportation directives follow DLA Procurement Notes C19 and C20, and the item is identified under solicitation SPE7M4-26-T-300Q, issued under NAICS code 326220 by the Department of Defense’s Fluid Handling Division. The contract is subject to technical and quality requirements from the DLA Master List, with the controlling revision tied to the solicitation issue date.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
REDUCER, HOSE
Solicitation # SPE7M3-26-T-7847
The contract is for a single reducer hose component with NSN 4730-01-652-2628, solicited under SPE7M3-26-T-7847 by the Department of Defense’s Fluid Handling Division. The item must be delivered within 10 days of award, and responses are due by August 17, 2026. The vendor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization to qualify. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure to foreign persons inside or outside the United States without prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with an approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled technical data, and approved access through the DLA questionnaire are permitted to handle such data. The point of contact for inquiries is William Cain, reachable via email and phone provided in the contract details.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M4-26-T-300T
This contract specifies the procurement of a nonmetallic hose assembly with NSN 0001S00000053, totaling 15 units to be delivered within 286 days after order. The solicitation is issued under number SPE7M4-26-T-300T with a response deadline of August 17, 2026, and is designated as a Total Small Business Set-Aside under NAICS code 332912. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. Packaging, identification, configuration management, and export control directives are strictly enforced, including compliance with ITAR or EAR regulations for technical data, which restricts access to foreign persons unless authorized. Only DLA contractors approved under the US/Canada Joint Certification Program, having completed mandatory training and documentation, may handle such controlled data. The item must be marked per physical identification requirements, and non-accepted supplies must be stripped of government identification. Inspection and acceptance are to occur at the origin, and the place of performance is located in New Cumberland, Pennsylvania, with a primary point of contact at Blake Tushar of the Fluid Handling Division under the Department of Defense.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-300U
Offerors must comply with strict requirements for this solicitation, including the prohibition of covered telecommunications equipment or services under FAR 52.204-24 and DFARS 252.204-7016, ensuring no equipment or services from restricted foreign sources are used in performance. Domestic material restrictions under the Berry Amendment and Buy American Act apply, with the Berry Amendment threshold lowered to $150,000, requiring detailed disclosure of any non-domestic materials and strict adherence to DFARS clauses 252.225-7006, 252.225-7012, and 252.225-7015. Small business joint ventures must submit specific representations for eligible categories including small business, service-disabled veteran-owned, WOSB, EDWOSB, and HUBZone. Vendors are strongly encouraged to quote quantity ranges due to fluctuating demand, as this allows buyers to consolidate or adjust requirements without administrative delays, though this does not apply to Auto IDC. Proposals including items produced via additive manufacturing are ineligible for award unless prior written approval is granted. Vendors must register through the new AMPS system within two months to retain access to the Vendor Shipment Module, with those using VSM WebServices required to update their internal schema to avoid disrupted shipping. All offers must be submitted via DIBBS, and if unable to quote by the closing date, a “No Bid” submission with anticipated date or reason is mandatory to avoid misinterpretation of non-responsiveness. Fast Pay is not applicable. The item under solicitation is a hose assembly with NSN 4720-01-625-6296, quantity 16 units, with a 140-day delivery requirement, and the point of contact is Blake Tushar.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
COUPLING, PIPE
Solicitation # SPE7M3-26-T-7837
This contract specifies the procurement of 304 stainless steel pipe couplings with a 150-lb class, threaded internal 1-1/2 NPT size, designated by NSN 4730-00-194-6702 and part numbers CAMCO 1120015 and ATI LADISH 32615T3041 1-2. The item is classified as a critical application component and must comply with all DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specified functional uses like batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents approved by NAVSEA; portable devices containing mercury must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. Packaging must adhere to DLA’s RP001 requirements, MIL-STD-129 marking and labeling, and palletization standards, with all items delivered FOB origin in accordance with the specified unit of issue and quantity variance of exactly zero percent. Delivery is required within 20 days to the USNS HECTOR A CAFFERATA at Dock 5, 8511 Kerns Street, San Diego, CA 92154, via traceable freight—parcel post is prohibited. The contract number is SPE7M3-26-T-7837, with a required delivery date of August 3, 2026, and a unit price of $15.00 for 15 units. The contracting office is the Department of Defense’s Fluid Handling Division, with William Cain as the primary point of contact.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332322
New
DIBBS
ELBOW, TUBE
Solicitation # SPE7M3-26-T-7848
The contract pertains to the procurement of 13 units of an ELBOW, TUBE with NSN 4730-00-913-6961, manufactured via a forging process that requires specialized tooling. The item is subject to strict export controls under either ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons, including foreign national employees and overseas subsidiaries, regardless of location. Access to this data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA. Further, the contract mandates CMMC Level 2 certification for any third-party assessment organization involved in cybersecurity compliance. The solicitation number is SPE7M3-26-T-7848, posted on August 5, 2026, with responses due by August 17, 2026. The NAICS code is 332322, and the point of performance is Cherry Point, NC, with a delivery timeframe of 396 days ADO. The contracting officer is Nicholas Davis, reachable via email and phone provided, and procurement details are linked through the DIBBS portal.
Sheet Metal Work Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, PI
Solicitation # SPE7M3-26-T-7840
The contract involves the procurement of five straight pipe-to-tube adapters made of stainless steel with an outer diameter of 0.375 inches, specified by part number SS600-71-4 from Swagelok, and identified by NSN 4730-01-216-4064. The items must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must follow MIL-STD-129 markings and RP001 DLA packaging standards. The unit of issue is each, with a fixed quantity of five units and no variance allowed, priced at $5.00 per unit for a total of $25.00. Delivery is required within 20 days FOB origin to the designated military destination at Dock 5, 8511 Kerns Street, San Diego, CA 92154, with inspection and acceptance occurring at the delivery point. Shipping must be via traceable freight methods, explicitly prohibiting parcel post. Packaging must be unitized per the contract’s specified Quantity per Unit Pack, and palletization must adhere to DLA guidelines. The contract is issued under solicitation SPE7M3-26-T-7840 with a required delivery date of August 3, 2026, and the point of contact is William Cain from the Fluid Handling Division of the Department of Defense.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
LOCKNUT, TUBE FITTIN
Solicitation # SPE7M3-26-T-7857
This contract specifies the procurement of 782 units of a locknut for tube fittings made from 7075-T73 aluminum alloy with a nominal tube size of 0.375 inch and 0.5625-18UNJF threads, compliant with SAE AS5179D and AS4841 standards. The item is classified as a critical application component and must be manufactured or assembled by an accredited entity listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Products List, accessible via eauditnet.com. All supplies must adhere to strict technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards, including ASTM D3951. The use of ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval. Packaging must comply with MIL-STD-129 and RP001 DLA packaging requirements, and items are to be palletized accordingly. The unit of issue is each, with no quantity variance permitted. Inspection and acceptance occur at the destination, and delivery is FOB origin with a required delivery timeline of 154 days, targeting January 19, 2027, as the ship date. All markings, labeling, and documentation must meet federal specifications, and shipment must follow DLA transport procedures C19 and C20 to the designated delivery point at Robins Air Force Base, Georgia.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
TEE, PIPE
Solicitation # SPE7M3-26-T-7843
This contract pertains to the procurement of TEE, PIPE with NSN 4730015230941, requiring delivery of four units under solicitation SPE7M3-26-T-7843. The items must be delivered within 20 days to the designated military destination at USNS HECTOR A CAFFERATA (ESB-8) in San Diego, California, with FOB origin terms and no quantity variance permitted. All packaging must comply with ASTM D3951 and MIL-STD-129, adhering strictly to DLA’s Packaging Requirements for Procurement, with precedence given to the DLA Master List of Technical and Quality Requirements over any other standard. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Shipment must be via traceable freight methods—parcel post is prohibited—and all items must be labeled and palletized according to specified guidelines. The unit of issue is each, with a total contract value of $16.00, and acceptance occurs at the destination point. The required delivery date is August 3, 2026, with submission deadlines and sourcing details governed by DLA procedures, and all technical and quality controls referenced through the DLA master list. Contact for inquiries is William Cain of the Fluid Handling Division, Department of Defense.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details