Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

MANIKIN, RESUSCITATION

Active
SPE2DH-26-T-6233Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation from the Department of Defense Medical Supply Chain FSH is for the procurement of one adult CPR training manikin, identified by NSN 6910-01-708-0577. The required equipment is a gender-neutral manikin with a medium skin tone, featuring a CPR rate monitor with LED indicators for 100-120 compressions per minute and an audible clicking mechanism for depth verification. The set must include a nylon carry case and ten face shield lung bags, and it requires two AA batteries for operation. The contract specifies a delivery timeline of 20 days after the order is placed. Compliance with DLA packaging requirements and technical quality standards is mandatory, as outlined in the DLA Master List. This federal acquisition is managed by the Department of Defense under solicitation number SPE2DH-26-T-6233, with the place of performance located at FPO 96692.

General Info

DoD procurement of one adult CPR training manikin under solicitation SPE2DH-26-T-6233.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

BOX 1, FPO, AP, 96692, USA

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-6233.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUSA
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MANIKIN,RESUSCITATION TRAINING
MANIKIN, RESUSCITATION TRAINING
..
ADULT CPR TRAINING MANIKIN; MEDIUM SKIN TONE;
GENDER NEUTRAL; EQUIPPED WITH CPR RATE MONITOR
THAT CONSISTS OF LED LIGHT TO INDICATE DELIVERY
OF 100-120 COMPRESSIONS PER MINUTE; REQUIRES
TWO (2) AA BATTERIES; ALSO EMITS A CLICKING
SOUNDING AS CHEST IS PUSHED TO APPROPRIATE DEPTH;
INCLUDES: 10 FACE SHIELD/LUNG BAGS AND NYLON
CARRY CASE.
..
UNIT OF ISSUE: SET (SE)
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
ADEQUATE DATA FOR THE NSN/Part Number: 6910-01-708-0577 Quantity: 1 SE Purchase Request: 7017992739QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
FITTING, HOSE END
Solicitation # SPE7M4-26-T-364W
This solicitation, number SPE7M4-26-T-364W, is issued by the Department of Defense Fluid Handling Division for the procurement of 22 hose end fittings under NSN 1680-00-969-9818. The delivery requirement is 156 days after receipt of order. Offerors are encouraged to provide quantity ranges to accommodate potential changes in demand and must disclose any non-domestic materials to comply with the Buy American Act and Berry Amendment. Additionally, bidders must certify that they will not provide covered telecommunications equipment or services and must avoid using additive manufacturing processes unless specifically authorized. The procurement process requires the use of DIBBS for quoting, including the submission of No Bid responses if a quote is delayed. Small business joint ventures must provide specific representations and certifications as outlined in FAR and DFARS. Furthermore, all contractors must prepare for a transition to the Account Management and Provisioning System for Vendor Shipment Module access to ensure continued shipping capabilities to the DLA.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
DIBBS
NRP, MEDIA CONVERTER
Solicitation # SPE8EF-26-T-1677
This solicitation, identified as SPE8EF-26-T-1677, is issued by the Department of Defense for the procurement of three media converters under NSN 1730-01-628-1414. The contract requires delivery within 48 days after receipt of the order, with performance taking place in New Cumberland, Pennsylvania. The response deadline for this federal requirement is September 8, 2026. The agreement mandates strict adherence to several technical and quality standards, including CMMC Level 2 Self-Assessment and the handling of Covered Defense Information. Suppliers must comply with DLA packaging requirements and the removal of government identification from non-accepted supplies. All technical and quality requirements are governed by the DLA Master List as specified in the solicitation terms.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A1-26-T-2688
This solicitation, number SPE4A1-26-T-2688, is issued by the Department of Defense Aviation Supply Chain for the procurement of 74 units of structural support, identified by NSN 1560-01-133-2696. The delivery requirement is 349 days after receipt of order, with the response deadline set for September 2, 2026. Offerors are encouraged to provide quantity ranges in their quotes to accommodate potential changes in demand and must disclose any non-domestic materials to comply with the Buy American Act and Berry Amendment restrictions. Contractors must represent that they will not provide covered telecommunications equipment and must adhere to specific registration requirements for the Vendor Shipment Module via the Account Management and Provisioning System. Additionally, additive manufacturing is prohibited unless specifically authorized by the contracting officer. Small business joint ventures are required to submit specific representations and certifications, and those unable to quote by the deadline should submit a No Bid status with an anticipated quote date to maintain communication with the buyer.
AVIATION SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BEAM, AIRCRAFT
Solicitation # SPE4A7-26-T-690M
This solicitation, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, is for the procurement of two aircraft beams identified by NSN 1560-01-593-6042. The contract requires delivery within 914 days after order and specifies performance at Tinker AFB. The acquisition is governed by NAICS code 336413 and includes strict adherence to DLA packaging, inspection, and configuration change management requirements. Compliance with high-level security and regulatory standards is mandatory, including CMMC Level 2 certification via a C3PAO and the protection of covered defense information. Because the item involves technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training and questionnaires to access the necessary data.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
EYE, MANIKIN, RESUSCITAT
Solicitation # SPE2DH-26-T-6231
This solicitation, issued by the Department of Defense Medical Supply Chain, is for the procurement of user-repairable replacement eyes for the 6-in-1 TCCC resuscitation training manikin. The requirement consists of one package containing two eyes, identified by NSN 6910-01-702-9059. The contract specifies a delivery timeline of 20 days after the order is placed. All supplies must adhere to DLA packaging requirements and technical quality standards as outlined in the DLA Master List. The solicitation is managed by the Federal Medical Supply Chain and requires the removal of government identification from any non-accepted supplies.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
TRACHEA, MANIKIN, RESUSC
Solicitation # SPE2DH-26-T-6241
This contract is a solicitation from the Department of Defense Medical Supply Chain for the procurement of one user-repairable replacement trachea designed for use with the 6-in-1 TCCC resuscitation training manikin. Identified by NSN 6910-01-702-9060, the item is issued as a single unit and must be delivered within 20 days after the order is received. The procurement is governed by DLA packaging requirements and specific technical and quality standards outlined in the DLA Master List. The solicitation, numbered SPE2DH-26-T-6241, was posted on August 25, 2026, with a response deadline of September 1, 2026. Performance for this federal contract is designated for FPO 96692.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PUMP, CENTRIFUGAL
Solicitation # SPE7M1-26-T-305R
This contract is for the procurement of one centrifugal pump, identified by NSN 4320-01-620-6773 and Carver Pump Company part number 998-1607-B-02. The item is to be delivered to DLA Distribution San Diego with a required delivery date of March 7, 2027, and a delivery window of 160 days. A critical technical note specifies that if the pump is purchased as part number 999-1607-B-02, it will be supplied without a motor as a set of unassembled loose parts, meaning it cannot be tested prior to shipment. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E, as well as the RP001 packaging requirements. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination. The contract also incorporates general technical and quality requirements as defined in the DLA Master List and requires the removal of government identification from any non-accepted supplies.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
DIBBS
DUCT ASSEMBLY, AIR C
Solicitation # SPE4A5-26-T-387B
This contract is for the procurement of one unit of a Duct Assembly, Air C, identified by NSN 1660-01-476-5710 and Lockheed Martin part number 3352134-1. The item is designated as a critical application item and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The delivery timeline is set for 171 days after the order, with a required delivery date of October 4, 2027. The agreement mandates strict adherence to DLA technical and quality requirements, including CMMC Level 2 self-assessment for cybersecurity and specific packaging standards under MIL-STD-2073-1E and MIL-STD-129. Inspection and acceptance will occur at the origin. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan to ensure compliance with critical, major, and minor attribute verification levels.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SKIN, AIRCRAFT
Solicitation # SPE4A7-26-T-689Y
This solicitation, number SPE4A7-26-T-689Y, is for the procurement of two aircraft skins (NSN 1560-01-145-0227) with a delivery requirement of 162 days after order. Offerors are encouraged to provide quantity ranges to accommodate potential demand volatility and must provide details regarding dealer or distributor certifications. If a quote cannot be submitted by the deadline, offerors should submit a No Bid response with an anticipated quote date to maintain communication with the buyer. Compliance requirements include strict adherence to domestic material restrictions such as the Berry Amendment and the Buy American Act, as well as representations against providing covered telecommunications equipment. Small business joint ventures must provide specific representations and certifications. Additionally, contractors must prepare for mandatory AMPS registration to maintain access to the Vendor Shipment Module. Additive manufacturing is prohibited unless specifically authorized by the contracting officer.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CARTRIDGE, RESPIRATO
Solicitation # SPE8E6-26-T-4342
This contract is for the procurement of air filtering respirator cartridges, identified by NSN 4240013422857 and 3M part number 7000051851. The order consists of three separate line items totaling 36 packages, with each package containing 60 cartridges. Delivery is required within 20 days, with a final required delivery date of August 27, 2026. Shipments are destined for the USCG Calhoun in North Charleston, SC, the 934 AW LGS in Minneapolis, MN, and USAFCENT in Abu Dhabi, AE. The items are classified as critical application items and must meet NIOSH approval TC-23C-1062. They are subject to a non-extendable shelf life of 60 months and must adhere to strict packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Additionally, the contract mandates compliance with CMMC Level 2 self-assessment, Covered Defense Information requirements, and a prohibition on the intentional addition of mercury. All shipments must be sent via the fastest traceable means, and the use of parcel post is prohibited.
Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
DIBBS
CLIP, WIRE SUPPORT
Solicitation # SPE4A6-26-T-22FC
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of eight wire support clips, identified by NSN 1560-00-783-6980. The contract requires delivery within 162 days after order and specifies performance at Tinker AFB. Technical and quality requirements are governed by the DLA Master List, with specific mandates for packaging, configuration change management, and inspection and acceptance at origin. Strict compliance is required regarding cybersecurity and data protection, including CMMC Level 2 certification and the handling of covered defense information. Because the technical data is subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete mandatory training and questionnaires to access the data. All physical items must adhere to specific marking and identification standards.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FITTING, STRUCTURAL
Solicitation # SPE4A7-26-T-689X
This contract is for the procurement of two structural fittings, identified as Boeing part number 310T4021-9 and NSN 1560-01-656-0667. The items are designated as critical application items and must comply with FAA airworthiness approval and specific technical data package requirements. Delivery is set for 157 days after order, with a required delivery date of September 17, 2026, and a need ship date of February 7, 2027. The items are to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The contractor must adhere to strict quality and packaging standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Supply chain traceability documentation is required per DLA Directive C03, and sampling must follow MIL-STD-1916 or ASQ H1331. The contract incorporates various DLA master list requirements regarding configuration change management, FAA bare item marking, and the removal of government identification from non-accepted supplies.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 334510
New
DIBBS
CONTROL UNIT, X-RAY
Solicitation # SPE2DH-26-T-6230
This solicitation, issued by the Department of Defense Medical Supply Chain, is for the procurement of one rechargeable battery handle for the Nomad Pro dental x-ray system. The specific component is identified by NSN 6525-01-684-5488 and features a nominal voltage of 22.2V with a maximum of 25.2V and a maximum energy output of 150W per hour. The contract requires delivery within 20 days after receipt of the order to Fort Hood, Texas. Compliance with DLA master lists for technical, quality, and packaging requirements is mandatory, including the removal of government identification from any non-accepted supplies. The solicitation is listed under NAICS code 334510 with a response deadline of September 1, 2026.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
MATTRESS, LITTER
Solicitation # SPE2DH-26-T-6228
This contract is for the procurement of two Warrior Evacuation Litter Pads (WELP) for the Department of Defense Medical Supply Chain. These black mattress pads measure 72 by 23 by 2 inches and weigh 10.5 pounds. They are engineered for high-altitude aviation use, meeting U.S. Air Force Air Mobility Command standards and Federal Aviation Regulations for flammability. The pads feature a non-reflective, conductive surface with fluid-impermeable materials and pressure relief vents designed to maximize patient pressure management and reduce shear injuries. The solicitation, identified as SPE2DH-26-T-6228, requires delivery within five days after receipt of order to San Antonio, Texas. Bidders must provide the source and part number for the items supplied. The contract adheres to DLA packaging and quality requirements, including the removal of government identification from non-accepted supplies, and specifies that the item is not regulated by the FDA.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331313
New
DIBBS
RESCUE AND TRANSPORT S
Solicitation # SPE2DH-26-T-6251
This solicitation issued by the Department of Defense Medical Supply Chain for the agency in Tustin, California, seeks one unit of a basic patient rescue and transport system. The equipment consists of a green high density plastic sheet measuring 10 inches in diameter by 36 inches in length when rolled, weighing less than 20 pounds. It is designed for patient removal and transport from challenging environments including cliffs, rock formations, snow fields, and confined spaces. The system includes a comprehensive accessory kit featuring a Cordura backpack towing harness, a steel locking D carabiner, horizontal and vertical lift slings, a tow strap, and removal handles. The contract requires the supplier to specify the source and part number for NSN 6530-01-620-2574. Delivery is required within 20 days after the order is placed. The procurement is subject to DLA master technical and quality requirements, specifically regarding packaging and the removal of government identification from non-accepted supplies. Responses for solicitation SPE2DH-26-T-6251 must be submitted by the deadline of September 1, 2026.
Alumina Refining and Primary Aluminum Production

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
CENTRIFUGE, LABORATORY
Solicitation # SPE2DH-26-T-6229
This solicitation from the Department of Defense Medical Supply Chain FSH is for the procurement of one laboratory centrifuge, identified by NSN 6640-01-624-3287. The required equipment is a small tabletop unit suitable for clinical and research applications, featuring a direct brushless induction drive motor and tool-free rotor exchange. Technical specifications include a power requirement of 120V, 310W, and dimensions of 18.9 by 14.6 by 12.2 inches. The contract mandates compliance with DLA packaging requirements and technical standards as outlined in the DLA Master List. Bidders must provide the specific source and part number being supplied. Delivery is required within five days after receipt of order to the performance location at Camp Pendleton. The response deadline for this solicitation is September 1, 2026.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
DISH, CULTURE, PETRI
Solicitation # SPE2DH-26-T-6224
This contract is for the procurement of high-sensitivity coliform count Petri film culture dishes under solicitation SPE2DH-26-T-6224. The requirement is for 4 packages, with each package containing 50 dishes. The items are FDA regulated and must be supplied according to specific manufacturer part numbers, such as those from 3M Company or Neogen Corp. Delivery is required within 20 days after the order, with the destination serving as the point of inspection and acceptance. The supplies must adhere to strict shelf-life and packaging standards, requiring a 12-month shelf life with no more than two months elapsed from the date of manufacture to the date of delivery. Packaging must be commercial grade, sealed to prevent damage, and marked according to Medical Marking Standard No. 1, including the lot control number and manufacture date. All technical and quality requirements are governed by the DLA Master List and specific medical acquisition packaging standards.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
PAD, HEAT TREATMENT
Solicitation # SPE2DH-26-T-6239
This contract is a solicitation from the Department of Defense Medical Supply Chain for the procurement of two cases of large, single-use instant heat treatment pads. These pads are designed to reach 112 degrees Fahrenheit when activated at a room temperature of 75 degrees Fahrenheit. Each case contains 24 units, and the items must be delivered within 20 days after the order is placed to the performance location at Fort Bragg. The supplies must adhere to specific DLA technical, quality, and packaging requirements, including the removal of government identification from non-accepted supplies. The heat pads must have a total shelf life of 24 months, with no more than 3 months elapsed from the date of manufacture to the date of delivery. All labeling must include the manufacturer date, expiration or retest date, and the contract or lot number in accordance with MMS1A standards.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
HANDLE, WEBBING, RESCUE
Solicitation # SPE2DH-26-T-6221
This contract is for the procurement of webbing handles used in rescue and transport systems, specifically identified as replacement handles for the basic patient rescue and transport system. The requirement is for one package containing four handles, referencing Skedco Inc part number SK-205 and NSN 6530-01-260-1214. The item is explicitly noted as not being an FDA regulated device. The supplier must adhere to DLA packaging requirements and Medical Marking Standard No. 1 for all labeling and shipping. Delivery is required within 20 days after the order, with the destination serving as the point for both inspection and acceptance. The contract is issued by the Department of Defense Medical Supply Chain and specifies that the bidder must clearly identify the company and part number being supplied.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331313
New
DIBBS
BAG, EXTRICATION COL
Solicitation # SPE2DH-26-T-6243
This solicitation from the Department of Defense Medical Supply Chain FSH is for the procurement of two royal blue extrication collar carry bags, identified by NSN 6530-01-584-3778. The bags must feature separate inside compartments for straps or heads and adhere to specific DLA packaging and quality requirements. Bidders are required to provide the country of origin and part numbers for the items being supplied. The contract requires delivery within 20 days after receipt of the order, with performance taking place at Davis Monthan AFB. Interested parties must submit responses by September 1, 2026, in accordance with the guidelines set forth in solicitation SPE2DH-26-T-6243.
Alumina Refining and Primary Aluminum Production

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
MEASURE, LIQUID
Solicitation # SPE2DH-26-T-6234
This solicitation, issued by the Department of Defense Medical Supply Chain FSH, is for the procurement of one liquid measure unit with a capacity of 250ML. The item is associated with NSN 6640-01-650-1146 and is intended for use with an unmounted water purification unit. Bidders are required to specify the source and part number being supplied and must adhere to DLA packaging requirements and quality standards as outlined in the DLA Master List. The contract requires delivery within 20 days after receipt of the order, with the place of performance located at Camp Pendleton, California. Interested parties must submit responses by September 1, 2026, in accordance with solicitation number SPE2DH-26-T-6234. The procurement also specifies the removal of government identification from any non-accepted supplies.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
LIGHT, SURGICAL, CEILING
Solicitation # SPE2DH-26-T-6261
This solicitation from the Department of Defense Medical Supply Chain FSH is for the procurement of three ceiling-mounted surgical examination lights, identified by NSN 6530-01-688-4565. These high-performance units feature eight LEDs producing 55,000 lux at a 24 inch focal length with a color temperature of 4300 degrees Kelvin and a color rendering index of 97. The lights are capable of dimming to 50 percent output and are supplied with a shipboard mil-spec dorn plug and stowing fixture. The equipment is specifically engineered for maritime environments, having passed the MIL-S-901D lightweight shock test in the stowed position and receiving approval for Grade B, Class I, Type A deck and hull mounting. The contract requires adherence to DLA master technical and quality requirements, including specific packaging standards and the removal of government identification from non-accepted supplies. Delivery is required within five days after the order is placed.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details