Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manual Actuation Switch Supplier

Open

State & Local

Response Deadline11/06/2026, 02:00:00 PM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract agreement establishes a partnership for the supply of manual actuation switches to prime contractors working on Dallas Area Rapid Transit procurement projects in Texas. The supplier is responsible for manufacturing or sourcing electrical switch components that strictly adhere to specific technical drawings and manufacturer part numbers. To ensure operational reliability, the supplier must perform all necessary inspections and tests to verify that the components are of merchantable quality and fit for their intended purpose. The scope of work concludes with the delivery of these tested electrical components to the designated destination within the state of Texas.

General Info

Agency

Texas → Dallas Area Rapid Transit

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component Manufacturing

Place of Performance

TX, USA

Set-Aside

NONE

Documents

This scope was carved out of 2101242.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SWITCH, MANUAL ACTUATION - ref 2101242

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 6

Submission deadline

Response Deadline

11/06/2026, 02:00:00 PM CSTin about 17 hours

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTexas → Dallas Area Rapid Transit

ContactsNo contacts available

OfficeN/A

Organization / AgencyTexas → Dallas Area Rapid Transit

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies manual actuation switches for prime contractors on Dallas Area Rapid Transit (DART) procurement projects. Manufactures or sources switches based on specific manufacturers' part numbers and technical drawings. Performs inspections and tests to ensure merchantable quality and suitability for intended purpose. Delivers completed, tested electrical switch components to the destination in Texas.

Similar Contracts

Same NAICS industry code

Supply of NEMA TS2 Signal Cabinets

Texas Department of Transportation

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Power Supply Equipment Supply (Phoenix Contact)This subcontract involves the procurement of 14 specialized power supply units, specifically Phoenix Contact part number 2320018, for the Department of Defense at the DDSP New Cumberland Facility. The supplier is responsible for sourcing and delivering the equipment in strict accordance with military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contract requires the full delivery of the units within 168 days after the order is placed. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 335999. Interested parties must have responded by the deadline of November 16, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly SupplierThis subcontract involves the supply of four special purpose electrical cable assemblies, specifically NSN 5995-01-716-9192, to support prime contractors under the DLA Weapons Support ASC Commodities Division of the Department of Defense. The selected supplier is responsible for the manufacture or sourcing of these assemblies, ensuring all items are packaged according to DLA Packaging Requirements RP001 and that any hazardous materials are labeled in compliance with 29 CFR 1910.1200. The opportunity is categorized under NAICS code 335999, with the place of performance located in New Cumberland. Interested parties must note the response deadline of November 13, 2026, following the posting date of November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Electrical Power Cable Assembly FabricationThis subcontract involves the manufacture and assembly of critical application electrical power cable assemblies for prime contractors supporting the DLA Weapons Support ASC. The scope of work requires the fabrication of assemblies according to NSN 6150-01-660-6020 and Bell Textron Inc PN 901-076-574-103, utilizing zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. The final deliverable consists of completed and certified power cable assemblies. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, with performance located in Tracy, California. To be eligible, contractors must maintain NIST SP 800-171 compliance and provide a CMMC Level 2 self-assessment. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026, falling under NAICS code 335999.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

Indicator Alarm Fuse Production (NSN 5920-00-702-6694)This subcontract involves the manufacture and supply of 3,570 indicator alarm fuses (NSN 5920-00-702-6694) for the DLA Weapons Support Active Devices Division. Production must strictly adhere to Technical Data Package Rev A Gen 1 and Basic CID A-A-55509E Revision E to ensure suitability for critical applications. The work will be performed at Tinker AFB and requires the use of precision electronic manufacturing equipment. Compliance is mandatory regarding the Buy American Act and the Berry Amendment for all materials used. Additionally, the contractor must satisfy DFARS cybersecurity standards and DLA RA001 quality requirements. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026, under NAICS code 335999.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

Manufacturer of Conductor Splices (NSN 5940-01-633-7596)This subcontract involves the manufacture and supply of 1,373 specialized conductor splices under NSN 5940-01-633-7596 for the Department of Defense, specifically the DLA Weapons Support ASC. The contractor is responsible for fabricating the units in strict accordance with TDP Rev A Gen 1 and SAE AS81824/11 Revision NR, utilizing tooling that meets these specific SAE standards. The agreement requires full compliance with the Buy American Act and DFARS 252.204-7012 regulations. Completed units are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026, falling under NAICS code 335999.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Electrical Receptacle Connector SupplierThis subcontract involves the supply of 70 electrical receptacle connectors (NSN 5935-00-134-0406) for prime contractors under the Defense Logistics Agency Weapons Support Active Devices Division. The manufacturer must ensure all components strictly adhere to MIL-DTL-2726/36C Revision C, MIL-DTL-2726C(1), and Technical Data Package Rev A Gen 1. Performance will take place in Tracy, California, under NAICS code 335999. The contractor is required to comply with rigorous federal standards, including DLA Packaging Requirements RP001, MIL-STD-2073-1E, and marking specifications per MIL-STD-129. Additionally, the supplier must meet all Buy American and Balance of Payments Program requirements. The response deadline for this opportunity is November 16, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Specialized Electrical Connectors and Branched WiringThis subcontract involves the supply of raw materials and specialized electrical connectors and branched wiring for prime contractors supporting the DLA Weapons Support ASC Commodities Division. All provided materials must strictly conform to Drawing NR 98748 90917 and TDP Rev B Gen 3, with a mandatory requirement for certifications of conformance for every component delivered. To ensure compliance and access to necessary technical data, the provider must maintain JCP certification. The contract is categorized under NAICS code 335999 and specifies a place of performance in zip code 57706-4835, with a response deadline set for November 19, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Manufacture of Electrical Caps (NSN 5999-01-684-2937)This subcontract involves the manufacture of 14 electrical caps to NSN 5999-01-684-2937 specifications for the DLA Weapons Support Active Devices Division. The fabrication must be completed using non-additive manufacturing processes, with all finished items packaged and marked in accordance with MIL-STD-129 and MIL-STD-2073-1E standards. Performance of the contract will take place in Tracy, California. To be eligible, the contractor must maintain SAE AS9003 or ISO 9001 quality systems and hold JCP certification. Additionally, the provider must have ITAR/EAR export control approval. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

Specialized Electrical Lead FabricationThis subcontract involves the manufacture of 15 high-specification electrical leads for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the leads according to NSN 6150-01-498-1141 specifications, which includes performing First Article Testing on two units and coiling the final products to 12x12 dimensions. All deliverables must be marked per MIL-STD-129 and packaged in accordance with MIL-STD-2073-1E. To be eligible, the provider must maintain SAE AS9003 or ISO 9001 quality systems and ensure full compliance with ITAR/EAR regulations and NIST SP 800-171 cybersecurity standards. The work is associated with NAICS code 335999 and will be performed in New Cumberland. Responses to this solicitation are due by November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Manufacturing and Supply of Switch Assemblies (NSN 5930-01-461-9037)This subcontract involves the manufacturing and supply of 24 finished switch assemblies for prime contractors supporting the DLA Weapons Support LSO Combat Vehicles and Armament. All assemblies must strictly adhere to NSN 5930-01-461-9037 specifications and the DLA Master List of Technical and Quality Requirements. Packaging and marking must be completed in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract requires full compliance with the Berry Amendment and DFARS 252.204-7012 regulations. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 335999. The response deadline for this opportunity is November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 10 hours ago

DEADLINE

Supplier of Special Purpose Electrical Insulation Sleeving (NSN 5970009042492)This subcontract involves the manufacture or sourcing of 800 units of special purpose electrical insulation sleeving, identified by NSN 5970009042492, for prime contractors supporting the Department of Defense. The work is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Hill AFB. The supplier must adhere to strict compliance standards, including marking requirements per MIL-STD-129 and Special Marking Code 33 for shelf life, as well as palletization according to RP001 DLA Packaging Requirements. Additionally, the contractor is required to maintain active registrations in SAM.gov and WAWF to facilitate the delivery and payment process.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

More opportunities from Texas → Dallas Area Rapid Transit

Same awarding agency

Specialized RF Amplifier Module RepairThis subcontract involves the specialized repair and refurbishment of CommScope Node A Bi-Directional RF Amplifier Modules, specifically the DCM AF 8037 and DCM AF 7037 models. The work supports prime contractors operating on Dallas Area Rapid Transit tunnel radio system projects, ensuring that all modules are restored to full functionality. The service provider must utilize specialized testing and calibration equipment to verify RF performance in strict accordance with manufacturer specifications. The primary objective is the delivery of fully repaired and functional RF amplifier modules under NAICS code 811210 for the Dallas Area Rapid Transit agency.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

RF Amplifier Module Repairs

Solicitation # 2101369

Dallas Area Rapid Transit is soliciting bids for a Blanket Purchase Order under solicitation number 2101369 to provide repair services for CommScope Node A RF Amplifier Modules used in its Tunnel Radio System. The scope specifically covers the repair of 700 MHz (DCM AF 7037, ID No. 7577534-00) and 800 MHz (DCM AF 8037, ID No. 7577538-00) amplifier modules. Qualified firms must possess demonstrated experience in repairing RF amplifier modules, bi-directional amplifiers, or distributed antenna system equipment. A critical requirement is that the vendor's facility must have the equipment necessary to test repaired modules in their normal working configuration using a CommScope Node A Chassis, ensuring all units are calibrated to original manufacturer specifications. Repaired modules must be returned to the specified Dallas delivery address within 120 days of receipt, accompanied by detailed repair reports documenting findings, performed repairs, and test results. Units deemed Beyond Economical Repair must be returned with supporting documentation. All repairs include a minimum six-month warranty covering workmanship and replacement parts at no additional cost to the Authority. Invoices are paid 30 days from the receipt of the invoice or order, whichever is later, and the Authority is exempt from Texas state and local sales and use taxes. To be considered responsive, bidders must submit all required documentation and signatures via the Bonfire portal.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

Component Testing and Inspection ServicesThis subcontract for Component Testing and Inspection Services involves providing specialized technical oversight for prime contractors working on Dallas Area Rapid Transit vehicle projects. The primary scope of work focuses on conducting functional tests and technical inspections of amber LED signals to ensure they conform to manufacturer specifications and technical drawings. This process requires the use of precise electrical testing equipment and measurement tools to verify all components meet established standards. The selected provider is responsible for certifying compliance with all technical requirements and delivering detailed inspection reports and test results to substantiate these findings. This opportunity is categorized under NAICS code 541380 and is associated with the Dallas Area Rapid Transit agency in Texas.

Testing Laboratories and Services

POSTED

DEADLINE

in about 17 hours

Rear Turn Signal Amber LED Lamp Assembly SupplierThis subcontract involves the sourcing and supply of rear turn signal amber LED lamp assemblies for prime contractors working on Dallas Area Rapid Transit vehicle projects. The supplier is responsible for providing components that strictly adhere to manufacturer part numbers and technical drawings to ensure merchantable quality for transit vehicle signaling. Responsibilities include the packaging and shipping of completed assemblies to the designated destination. The selected provider must maintain full compliance with all manufacturer technical requirements and provide necessary ethical standards certifications. This procurement falls under NAICS code 335122 and is managed through the Dallas Area Rapid Transit agency in Texas.

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

DEADLINE

in about 17 hours

LAMP ASSEMBLY, REAR TURN SIGNAL AMBER LED - ref Z2101244

Solicitation # 2101244

The Dallas Area Rapid Transit Authority is soliciting the procurement of rear turn signal amber LED lamp assemblies under solicitation number 2101244. The contract requires the seller to provide supplies that conform to specific drawings, specifications, and manufacturer part numbers, ensuring the products are of merchantable quality and suitable for their intended purpose. Inspection and acceptance will occur at the destination, with the seller responsible for performing all necessary tests to substantiate compliance. The agreement is governed by Purchase Order Terms and Conditions, which mandate that invoices include detailed item descriptions, quantities, and unit prices. Payments are issued 30 days from the receipt of the invoice or the order, whichever is later. The Authority is exempt from Texas state and local sales and use taxes. Additionally, the seller must certify compliance with ethical standards, including the prohibition of gratuities to Authority officials, a commitment to equal opportunity employment, and certifications regarding the non-boycott of Israel and no association with foreign terrorist organizations.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

DEADLINE

in about 17 hours

SWITCH, MANUAL ACTUATION - ref 2101242

Solicitation # 2101242

Solicitation 2101242 is issued by the Dallas Area Rapid Transit Authority for the procurement of manual actuation switches. The solicitation was posted on November 2, 2026, with a response deadline of November 6, 2026. Performance and inspection will take place in Texas, with inspection and acceptance occurring at the destination. The seller is responsible for ensuring that all supplies are of merchantable quality, suitable for their intended purpose, and conform to all specified drawings and technical requirements for the manufacturers' part numbers. The contract is governed by specific Purchase Order Terms and Conditions rather than standard FAR clauses. Payment is issued 30 days from the receipt of the invoice or the order, whichever is later, and invoices must include the purchase order number, description of supplies, and extended totals. The Authority is exempt from Texas state and local sales and use taxes. Sellers must certify that they do not boycott Israel and are not associated with any foreign terrorist organizations as identified by the Texas Comptroller. Additionally, the seller must adhere to equal opportunity employment practices and warrant that no Authority official has a pecuniary interest in the order.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

in about 17 hours

Prop Battery Door SupplierThis subcontract involves the supply and fabrication of Prop Battery Doors for prime contractors working on Dallas Area Rapid Transit projects. The selected supplier is responsible for manufacturing parts in strict accordance with provided technical drawings and manufacturer part numbers, ensuring all components undergo quality inspections to verify merchantable quality and suitability for their intended use. The scope of work includes the complete production cycle, from fabrication to the final packaging and delivery of the inspected battery door components. This opportunity is categorized under NAICS code 332710 and is associated with the Dallas Area Rapid Transit agency in Texas.

POSTED

DEADLINE

in about 17 hours

PROP BATTERY DOOR - ref 2101238

Solicitation # 2101238

Solicitation 2101238 is a request for a prop battery door issued by the Dallas Area Rapid Transit Authority in Texas. The solicitation was posted on November 2, 2026, with a response deadline of November 6, 2026. The contract requires that all supplied materials be of merchantable quality, suitable for their intended purpose, and compliant with all provided drawings, specifications, and technical requirements for manufacturers' part numbers. Inspection and acceptance of the deliverables will occur at the destination. The agreement includes strict compliance certifications, requiring the seller to verify they do not boycott Israel, are not associated with foreign terrorist organizations, and have no pecuniarily interested relationships with Authority officials. Administratively, the Authority is exempt from Texas state and local sales and use taxes. Payments are processed 30 days from the receipt of the invoice or the order, whichever is later, with invoices required in triplicate. The contract also mandates equal opportunity employment practices and prohibits the assignment of the order without written consent from the Contracting Officer.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 17 hours

Gen 2 Radiator and Fan Wire Harness ManufacturingThis subcontract involves the manufacturing and supply of Gen 2 radiator and fan wire harnesses for prime contractors working on Dallas Area Rapid Transit procurement projects. The selected provider is responsible for fabricating harnesses that strictly adhere to provided manufacturer part numbers and technical drawings, ensuring all components meet precise specifications. To guarantee quality and functionality, the contractor must perform comprehensive electrical continuity and insulation resistance testing on all units. Once tested and inspected, the completed wire harnesses are to be delivered to the designated destination within the state of Texas.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

in about 17 hours

WIRE HARNESS RADIATOR ,FANS GEN 2 - ref 2101230

Solicitation # 2101230

The Dallas Area Rapid Transit Authority is soliciting the procurement of Gen 2 radiator and fan wire harnesses under solicitation number 2101230. This contract requires the seller to provide supplies that strictly conform to specified drawings, technical requirements, and manufacturer part numbers. Performance is based in Texas, with inspection and acceptance occurring at the destination. The seller is responsible for conducting all necessary tests to ensure compliance, while the Authority retains the right to perform specialized inspections. The agreement is governed by strict terms and conditions, including a requirement that delivery time and rate are of the essence. Payments are issued 30 days from the receipt of the invoice or order, whichever is later, and the Authority is exempt from Texas state and local sales and use taxes. The seller must adhere to equal opportunity standards and certify that they do not boycott Israel or maintain contracts with foreign terrorist organizations. Additionally, the seller warrants that no public officials of the Authority are pecuniarily interested in the order and that no gratuities have been offered to secure favorable treatment.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

in about 17 hours

Trane Duct Furnace SupplyThis subcontract involves the procurement and delivery of heating hardware for prime contractors working on Dallas Area Rapid Transit projects. The scope of work specifically requires the provision of one 150,000 Btu/hr Trane Duct Furnace gas-fired unit heater, which must be delivered to a designated DART facility. The contractor is responsible for managing all freight and delivery logistics to ensure the unit reaches the project site. In addition to the hardware supply, the contractor must provide the most favorable commercial manufacturer warranties available for the equipment. This project falls under NAICS code 423450 and is associated with the Dallas Area Rapid Transit authority in Texas.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

in about 17 hours

Gas-Fired Unit Heater InstallationThis subcontract involves the removal of an existing duct heater and the installation of a new 150,000 Btu/hr Trane Duct Furnace for prime contractors working on Dallas Area Rapid Transit projects. The scope of work includes the full installation process, functional testing, and verification to ensure the unit is fully operational, concluding with the delivery of a completed service report. Qualified bidders must hold a valid mechanical or HVAC contractor license and strictly adhere to OSHA and DART Safety Protocols. The solicitation was posted on October 31, 2026, with a response deadline of November 6, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 17 hours

Earlier notices in this NAICS code

Posted before this notice, open and closed

Control Panel Fabrication

CITY OF SAN JACINTO

POSTED

DEADLINE

Solicitation # Z5478

Nashville Electric Service

POSTED

DEADLINE

in about 17 hours

LED Passenger Display Supplier

POSTED

DEADLINE

SWITCH, MANUAL ACTUATION - ref 2101194

Solicitation # 2101194

Dallas Area Rapid Transit

POSTED

CLOSED

Manufacture and Supply of 35kV Grounding Switches

City of Pasadena, Water & Power Department, Power Delivery

POSTED

DEADLINE

Furnish And Deliver Grounding Switches 35kV For The Water & Power Department, Power Delivery City Of Pasadena, California

Solicitation # 2026-IFB-MS-0454

City of Pasadena, Water & Power Department, Power Delivery

POSTED

DEADLINE

MBR System Equipment Supplier

POSTED

DEADLINE

High and Low Voltage Transformer Bushing Supplier

T&D Engineering

POSTED

DEADLINE

in about 1 month

137072 POWER SUPPLIES AND RELATED COMPONENTS

Solicitation # 232777

City of Los Angeles

POSTED

DEADLINE

Supply of Pre-Assembled Horizontal Line Post Insulators

Nashville Electric Service

POSTED

DEADLINE

in about 17 hours

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS