Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Manufacture and Supply of Access Covers (NSN 5340-00-851-4894)

Active

Federal

Response Deadline09/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of 121 Access Covers under NSN 5340-00-851-4894 for the Department of Defense Land Supply Chain. The contractor is responsible for fabricating the covers according to specific technical data, conducting ballistic testing in accordance with MIL-A-46027, and utilizing zero-based sampling per MIL-STD-1916 or ASQ H1331. All finished units must be delivered with Certificates of Quality Compliance and Conformance. To qualify, the manufacturer must hold ISO 9001:2015 certification and adhere to marking and packaging standards defined by MIL-STD-129 and MIL-STD-2073-1E. The project falls under NAICS code 332311 and is to be performed in New Cumberland, Pennsylvania. The response deadline for this requirement is September 28, 2026.

General Info

Manufacture 121 Access Covers for DoD by September 28, 2026, in Pennsylvania.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332311 - Prefabricated Metal Building and Component ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-26-T-12Q6.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

COVER, ACCESS

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 28

Submission deadline

Response Deadline

09/28/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures 121 units of Access Covers (NSN 5340-00-851-4894) for prime contractors delivering DLA supply contracts. Fabricates covers to technical data, performs ballistic testing per MIL-A-46027, and implements zero-based sampling per MIL-STD-1916 or ASQ H1331. Requires ISO 9001:2015 certification and marking/packaging per MIL-STD-129 and MIL-STD-2073-1E. Delivers finished covers with Certificates of Quality Compliance and Conformance.

Similar Contracts

Same NAICS industry code

22 MXS Porta-Fab Offices Hangar 1126(SB) and 1107

Solicitation # FA462126Q0048

This solicitation, identified as FA462126Q0048, seeks a contractor to design, deliver, build, and install two single-story modular office structures at McConnell AFB in Kansas. The units will be placed on existing concrete hangar floor slabs at Hangar 1126 South Bay and Hangar 1107. This is a total small business set-aside under NAICS code 332311. Prospective offerors must submit their quotes in PDF format, limited to 10 pages, by September 16 at 12:00am CDT. All submissions must include completed representations, which may be sourced from SAM.gov. It is important to note that funds are not currently available for this acquisition, and the government's obligation is contingent upon the future availability of appropriated funds. Questions regarding the scope of work must be submitted via email to the designated points of contact by September 14 at 12:00am CDT.

FA4621 22 Cons Pk

POSTED

about 4 hours ago

DEADLINE

Metal Bar Supplier (0.500" Diameter)This subcontract involves the supply of precision-manufactured metal bars for prime contractors supporting the DDSP New Cumberland Facility. The required specifications include a diameter of 0.500 inches and lengths ranging from 10 to 12 feet, with a reference weight of 0.668 pounds per foot. The supplier must ensure all products are marked according to MIL-STD-129 and utilize ASTM A700 codes Z and ZZ for special packaging and preservation. This opportunity is managed by the Department of Defense under NAICS code 332311, with performance taking place in New Cumberland, Pennsylvania. Responses are due by September 28, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

Modified Shipping Container Fabrication & SupplyThis subcontract involves the fabrication and supply of modified shipping containers for prime contractors supporting USDA-WS Guam State Office projects in Barrigada. The scope of work requires dividing container interiors into two insulated rooms, installing drywall, and laying vinyl or laminate flooring to maintain a ceiling height of approximately 96 inches. The final deliverables must be fully modified and ready for transport. The opportunity is designated as a total small business set-aside under NAICS code 332311 and is managed by the Department of Agriculture. Interested parties must respond by September 17, 2026, following the posting date of September 15, 2026.

Mrpbs Minneapolis Mn

POSTED

DEADLINE

in about 23 hours

Modular RLF Fabrication and DeliveryThis subcontract involves the fabrication and delivery of a prefabricated modular Relocatable Facility for prime contractors supporting Air Force Test Center projects at Edwards Air Force Base. The project requires the construction of a modular building measuring approximately 36 by 60 feet, specifically designed for pilot flight equipment storage. All fabrication must adhere to UFC 3-301-01, UFC 3-310-04, and MIL STD 3007 standards. The completed modular facility will be delivered to the site under FOB Destination terms. This effort is managed by the Department of Defense under agency FA9302 Aftc Pzz, with the place of performance located in Edwards, California. The contract falls under NAICS code 332311.

FA9302 Aftc Pzz

POSTED

DEADLINE

Quonset-Style Metal Building SupplyThis 8(a) set-aside subcontract through the Department of Homeland Security involves the supply of pre-engineered metal building systems for prime contractors working on USCG Academy projects in New London, Connecticut. The scope of work focuses on the fabrication and delivery of a complete prefabricated S-model Quonset style building kit, which includes structural members, connections, anchorages, straight walls, and curved roof components. The selected provider is responsible for submitting manufacturer shop drawings and providing color and texture samples for the metal coating finishes. This opportunity falls under NAICS code 332311 and requires a response by September 24, 2026.

POSTED

DEADLINE

Solicitation # N62841

The Naval Ordnance Test Unit in Cape Canaveral, Florida, is soliciting the purchase of two pre-assembled 4x6 aluminum and vinyl guard booths mounted on welded steel frame trailers. The booths must feature bullet-resistant construction, insulated walls and roofing, a stainless steel counter, and a pre-wired electrical package including a front-mounted A/C unit and LED lighting. Because the units will be placed in a marine environment, salt-resistant materials are required. The trailers must include brakes, a tread-plate platform, leveling jacks, and a two-inch ball hitch. The solicitation, numbered N62841, is issued by the Department of Defense with a response deadline of September 18, 2026. Contractors are expected to provide services between 0800 and 1600 on weekdays, excluding recognized US holidays. The agreement specifies that contractors are not compensated for delays caused by unscheduled gate closures at the installation. Technical inquiries regarding specifications should be directed to Kris Vanslyke, while primary contract contact is Natalie Lucas.

Commanding Officer

POSTED

DEADLINE

5410--Exterior Decontamination Shelter - FARGO VA Medical Facility

Solicitation # 36C26326Q1087

Solicitation 36C26326Q1087 is a firm-fixed price requirement for a three-line decontamination shower system and tent for the Fargo VA Medical Center. The system must support ambulatory and non-ambulatory casualties and mass casualty triage, featuring integrated water heating and decontamination components. Key technical specifications require the shelter to be deployable by at least four people within four minutes, with a deployed size not exceeding 17 feet wide by 22 feet long by 10 feet high and a storage size no larger than 48 inches cubed. The equipment must be delivered FOB destination to the Fargo VA Health Care System Warehouse, with a period of performance spanning from September 20, 2026, to December 20, 2026. This procurement is a total set-aside for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB). Offerors must be active in the System for Award Management (SAM) and provide a signed Buy American Act Certificate to avoid an irresponsible determination. Awards will be made on a best-value basis, evaluating technical capability and past performance as acceptable, unacceptable, or neutral, alongside a fair and reasonable price assessment. Submissions must be organized into three volumes covering pricing, administrative documents, and evaluation factors, and emailed to the contract specialist by September 20, 2026, at 22:00.

Network Contract Office 23 (36C263)

POSTED

DEADLINE

JSF Flight Equipment Trailer

Solicitation # FA930226Q0134

Solicitation FA930226Q0134 is a full and open competition for the construction, delivery, and installation of a 36 by 60 foot modular Relocatable Facility to serve as a Pilot Flight Equipment Facility for the 412th Maintenance Group at Edwards Air Force Base, California. The facility must include five offices, restrooms with showers, laundry facilities, a kitchen area, and an ADA accessible entry ramp. All work must adhere to Unified Facilities Criteria, Military Standards, FAA specifications, and Air Force Instructions. The contractor is responsible for site preparation, safety barricades, and final site clean-up. This is a Firm Fixed Price contract with a period of performance of 90 calendar days after receipt of order. Award will be based on Best Value, with evaluation factors prioritized as Technical Acceptability, followed by Price, and then Past Performance. Offerors must provide a detailed technical approach and examples of their three most recent relevant projects. Quotes are due by September 21, 2026, and must be submitted via email to the designated points of contact. Invoicing will be processed through the Wide Area WorkFlow system.

FA9302 Aftc Pzz

POSTED

DEADLINE

Modified Shipping Containers for Guam

Solicitation # 12639526Q0285

The USDA Animal and Plant Health Inspection Service (APHIS) is seeking a total small business set-aside contract for the procurement, modification, delivery, and installation of one new 40ft x 8ft high-cube steel shipping container for the Wildlife Services Guam Program in Barrigada, Guam. The project requires the container to be installed on an existing concrete pad, which may require minor refurbishing, and secured with typhoon-rated tie-down anchoring. The exterior must feature corrosion-resistant paint, a silicone roof coating, two aluminum outward-opening doors, and three windows equipped with accordion-style typhoon shutters. The interior must be divided into two rooms of approximately 55% and 45% size, separated by an insulated wall with an interior door. Specifications include R-13 or greater insulation in the walls and ceiling, drywall finishing, vinyl or laminate flooring, and a ceiling height of approximately 96 inches. Electrical requirements include a 100-amp panel box, twelve outlets, four LED or fluorescent lighting fixtures, and two 12,000 BTU minimum split A/C units. The vendor is responsible for the internal electrical readiness and the final connection to the site's 220v and 120v systems. This acquisition is conducted under simplified procedures for commercial products and services, with requests for the solicitation due by September 17, 2026.

Mrpbs Minneapolis Mn

POSTED

DEADLINE

in about 23 hours

USCG Academy Salt Shed

Solicitation # 70Z08426QDL950035

The Department of Homeland Security, through the USCG LOG-95 Regional Contracting Northeast, is soliciting a Firm-Fixed-Price contract for the demolition of an existing salt shed and the installation of a replacement pre-engineered metal S-model Quonset-type structure at the USCG Academy in New London, Connecticut. The scope of work includes the removal and off-site disposal of the existing structure and vegetation, site preparation, and the provision of a building system featuring straight walls and a curved roof. The project requires the contractor to provide all necessary equipment, labor, materials, and supervision, and must be performed by a contractor holding valid State of Connecticut Contractor licenses. The contract will be awarded to the responsible offeror based on the Lowest Price Technically Acceptable (LPTA) basis, following a pass/fail technical evaluation of the offeror's approach and qualifications. Work must commence within 30 calendar days of the award and be completed within 60 calendar days of commencement. Proposals must be submitted in two separate volumes, consisting of a technical proposal and a price proposal, by September 24, 2026. The procurement is designated as an 8(a) Set-Aside and incorporates various FAR clauses regarding small business limitations, labor standards, and security requirements, including the safeguarding of controlled unclassified information.

POSTED

DEADLINE

Guard Booth - Austin

Solicitation # 2023H2-26-Q-00056

The Department of the Treasury's Operation Services is seeking a contractor for the Guard Booth project at the IRS Austin Campus in Texas. The selected contractor will be responsible for the demolition and removal of existing guard booths at perimeter entry and exit Gates 2 and 3, followed by the delivery and installation of two 4x4 Durasteel bullet-resistant guard booths. These new installations must meet Interagency Security Committee Level IV or higher standards, and the contractor is responsible for all labor, equipment, materials, supervision, and site verification. This opportunity, solicitation number 2023H2-26-Q-00056, is designated as a total Small Business Set Aside under NAICS code 332311. Interested parties must submit their responses by September 18, 2026, at 2:00 PM. Primary coordination for this contract is managed by Dr. Carolyn Bennett and Katie Marrette.

Operation Services

POSTED

DEADLINE

Heat Exchanger Equipment SupplyThis subcontract agreement involves the manufacture and delivery of an industrial-grade shell and tube heat exchanger for prime contractors working on University of North Dakota facility projects. The supplier is responsible for ensuring the equipment meets specific capacity and dimensional requirements and adheres to the ASME Boiler and Pressure Vessel Code standards. The contract is categorized under NAICS code 332311 and was posted on September 14, 2026, with a response deadline of October 8, 2026. The scope of work concludes with the physical delivery of the heat exchanger unit to the designated project site.

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

Supply of Cylinder Assembly, ActuatorThis subcontract involves the supply of a Cylinder Assembly, Actuator, specifically NSN 3040200104264, procured from Liftking Manufacturing Corp for prime contractors supporting DLA Land and Maritime Land Supply Chain projects. The contractor is responsible for ensuring all items meet RA001 technical and quality requirements and managing the removal of Government identification according to RQ011. Packaging must be performed in accordance with RP001 and MIL-STD-2073-1E, with the physical actuator assembly delivered FOB Origin. The project is associated with NAICS code 333613 and is performed in San Diego, California, under the agency of the Department of Defense.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Brake Shoe Supplier (16 1/2 by 7 in Drum)This subcontract involves the manufacture or sourcing of brake shoes for 16 1/2 by 7 inch drums to support prime contractors delivering to the Land Supply Chain agency within the Department of Defense. The supplier must ensure all products comply with the DLA Master List of Technical and Quality Requirements (RA001) and DLA Packaging Requirements (RP001), while adhering to RQ011 for the removal of government identification from non-accepted supplies. The contractor is responsible for the delivery of finished brake shoes to the designated government destination. This opportunity is categorized under NAICS code 336390, with a response deadline of September 28, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

Manufacture and Supply of Synchro ClampsThis subcontract with the Department of Defense Land Supply Chain involves the manufacture and supply of 64 precision-machined synchro clamps for prime contractors supporting DLA supply contracts. The fabrication process must strictly adhere to Basic Drawing NR 10001 2688661 Revision NR A, utilizing precision CNC machining to meet 1972 drawing tolerances and the DLA Master List of Technical and Quality Requirements. The contractor is required to ensure all units are finished and packaged according to MIL-STD-129 marking standards and maintain NIST SP 800-171 compliance. This project falls under NAICS code 332710, with a response deadline set for September 28, 2026.

POSTED

about 23 hours ago

DEADLINE

Supply of O-Rings (NSN 5331015085727)This subcontract through the Department of Defense Land Supply Chain involves the supply of two O-ring components identified by NSN 5331015085727 for prime contractors. The provider is responsible for sourcing or manufacturing the components and ensuring they meet the technical and quality requirements specified in RA001. All deliverables must be marked according to MIL-STD-129 and packaged in compliance with RP001 DLA Packaging Requirements for Procurement. The performance of this contract is centered in FPO, 96322-1400, under NAICS code 325211.

Plastics Material and Resin Manufacturing

POSTED

about 23 hours ago

DEADLINE

Mounting Bracket Manufacturing and SupplyThis subcontract for the Department of Defense Land Supply Chain involves the manufacturing and supply of eight mounting brackets fabricated to NSN 5340-01-656-1094 specifications. The contractor is responsible for commercial packaging according to ASTM D3951, palletization per RP001 DLA Packaging Requirements, and strict adherence to FED-STD-313 for hazardous materials. The project is categorized under NAICS code 332510 and will be performed at Fort Carson, zip code 80913-4104. Delivery of the packaged and palletized units is required on an FOB Origin basis, with a response deadline set for September 28, 2026.

Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Linear Actuating Cylinders (NSN 3040014090114)This subcontract involves the manufacture or sourcing of linear actuating cylinders, specifically NSN 3040014090114, for prime contractors supporting the Department of Defense Land Supply Chain. The performance of this contract takes place at Hunter AAF and requires strict adherence to quality and inspection standards, specifically SAE AS9003 or ISO 9001, as well as RP001 packaging requirements. The provider must maintain full ITAR or EAR export compliance and ensure that all physical cylinders are delivered with the necessary inspection and quality documentation. This opportunity falls under NAICS code 333613, with a response deadline set for September 28, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Hydraulic Accumulators (NSN 2590-01-531-1195)This subcontract involves the procurement and delivery of two CNH Industrial America LLC hydraulic accumulators, part number 47583035 and national stock number 2590-01-531-1195, to support prime contractors on DLA Land and Maritime supply contracts for the US Army in Poland. The successful provider must ensure the shipment is delivered to the US Army SSA located in Zaczernie, PL. Compliance requirements include the provision of Safety Data Sheets in accordance with 29 CFR 1910.1200(g) and the submission of receiving reports as specified by DFARS Appendix F. This requirement is managed under the Department of Defense Land Supply Chain with a NAICS code of 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

MIL-STD-129 and DLA Packaging Compliance

Corrugated and Solid Fiber Box Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of NSN 2815-01-689-8829

Other Support Activities for Air Transportation

POSTED

about 23 hours ago

DEADLINE

O-Ring Supply (NSN 5331002913082)This subcontract with the Department of Defense Land Supply Chain involves the procurement of 13,538 O-rings for prime contractors. The supplier is responsible for manufacturing or sourcing the hardware to meet the exact material and dimensional specifications of NSN 5331002913082 using approved rubber or polymer compounds. The contractor must provide Safety Data Sheets and hazard warning labels that comply with 29 CFR 1910.1200(g) and Federal Standard No. 313. All completed hardware and associated documentation must be delivered to the designated government location at Robins Air Force Base.

All Other Plastics Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

DLA Compliant Packaging and Shipping ServicesThis subcontract for DLA Compliant Packaging and Shipping Services supports prime contractors delivering supply contracts for the Department of Defense Land Supply Chain. The service provider is responsible for executing specialized packaging protocols according to RP001 and managing the removal of government markings per RQ011. Operations include the use of military-grade materials such as moisture barriers and crates, as well as coordinating deliveries for FAR 52.246-2 inspections. The contract is categorized under NAICS code 484220 and will be performed at Fort Drum, New York. Interested parties must submit responses by September 28, 2026, following the posting date of September 15, 2026. The scope focuses on the delivery of fully packaged and labeled shipments that meet strict military specifications.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

Mounting Plate Fabrication and SupplyThis subcontract for Mounting Plate Fabrication and Supply, managed by the Department of Defense Land Supply Chain, requires the manufacture and delivery of metal mounting plates for prime contractors supporting DLA supply contracts. Performance will take place at Fort Drum, with fabrication utilizing CNC, stamping, or machining processes in strict accordance with the DLA Master List of Technical and Quality Requirements. The contractor must adhere to DFARS 252.225-7001 Buy American standards and comply with RP001 packaging and RQ011 identification requirements. Notably, additive manufacturing is prohibited for this project. Interested parties must submit responses by September 28, 2026, under NAICS code 332312.

Fabricated Structural Metal Manufacturing

POSTED

about 23 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS