This Government Contract opportunity from Government of Canada was posted on January 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Manufacture and Supply of BUFFER (PN 3542213)

Closed

International

Submission Closed01/27/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336390

New

SLED

Transit Vehicle Radiator SupplyThis subcontract focuses on the supply of radiator assemblies for Gen 2 Diesel vehicles, specifically the 2000s through 2400s series, used in projects for the Southwest Ohio Regional Transit Authority. The scope of work requires the provision of Modine Radiator Thin, Gen 2 units or approved equivalents to support prime contractors. All deliverables must comply with the regulatory standards set forth in 49 U.S.C. Section 5325(j)(2)(D). The contract is categorized under NAICS code 336390 and is managed through the Inventory agency in Ohio.

POSTED

DEADLINE

Diesel Engine Fuel Supply Tubes and GasketsThis subcontract focuses on the procurement and delivery of fuel injector supply tubes and connection gaskets specifically designed for ISL9 - CM2350 engines. The scope of work involves providing part number 5481953 for the tubes and part number 4997725 for the gaskets to prime contractors operating on Southwest Ohio Regional Transit Authority projects. The agreement is categorized under NAICS code 336390 and mandates strict compliance with 49 U.S.C. Section 5325(j)(2)(D). Managed through the Inventory agency in Ohio, the contract ensures the necessary engine components are supplied to maintain transit infrastructure and vehicle performance.

POSTED

DEADLINE

Transit Door Solenoid Locks SupplyThis subcontract focuses on the supply of solenoid lock units for rear entrance doors used in Southwest Ohio Regional Transit Authority vehicle projects. The agreement specifies the delivery of particular components, including part numbers 1201-1934 and 82-75829-000, while requiring clear designation of whether the parts are original equipment manufacturer or replacement units. The contract mandates strict adherence to 49 U.S.C. Section 5325(j)(2)(D) concerning operational controls. Classified under NAICS code 336390, the procurement is managed through the Ohio Inventory agency with a response deadline set for November 3, 2026.

POSTED

DEADLINE

Supply of Exhaust Mufflers (NSN 2990013511671)This subcontract, managed by the Department of Defense under the DLA Weapons Support Strategic Acquisition Program Directorate, involves the manufacture or procurement of approximately 23 new exhaust mufflers identified by NSN 2990013511671. The contractor is responsible for supplying these units to prime contractors, ensuring that all items are brand new and not remanufactured. The agreement requires strict adherence to MIL-STD-129 for marking and DFARS 252.223-7008 regarding the use of hexavalent chromium. All deliverables must be completed within a 97-day window. The opportunity falls under NAICS code 336390, with a response deadline set for November 17, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Supplier of Engine Compartment Hoods (NSN 2510-01-610-7412)This subcontract opportunity is for the manufacture or sourcing of engine compartment hoods identified by NSN 2510-01-610-7412 to support prime contractors delivering to the DLA Weapons Support Strategic Acquisition Program Directorate. The selected supplier must utilize automotive-grade steel or aluminum and ensure all products meet DLA quality standards and FAR 52.222-50 regulations. The scope of work includes the physical delivery of the hoods to a designated delivery point. The procurement is categorized under NAICS code 336390 and is designated as a Total Small Business Set-Aside per FAR 19.5. Interested parties must submit their responses by November 17, 2026. This effort is managed under the Department of Defense for the DLA Weapons Support Strategic Acquisition Program Directorate.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Manufacture of Vehicle Roof Hatch Assemblies (NSN 2510-01-570-1588)This subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Operations, requires the manufacture and supply of 30 vehicle roof hatch assemblies identified by NSN 2510-01-570-1588. The contractor must fabricate these units in strict accordance with reference drawings 19207 12505444 Rev A, 19207 12505446 Rev B, and 19207 12505449 Rev C. Production must utilize metal fabrication equipment to ensure all specified tolerances are met, and the use of additive manufacturing is explicitly prohibited. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 336390. Performance of the contract will take place in Texarkana, Texas. Interested parties must respond by the deadline of November 13, 2026, to provide the completed assemblies for prime contractors on DLA supply contracts.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Transmission Fluid Coolers (NSN 3040014786945)This subcontract, issued by the Department of Defense under the DLA Weapons Support Strategic Acquisition Program Directorate, involves the procurement or manufacture of approximately 55 transmission fluid coolers. The specific component is identified by NSN 3040014786945 and must be delivered in strict compliance with the DLA Master List of Technical and Quality Requirements RA001. To be eligible for this contract, providers must possess a valid CAGE code. The opportunity is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 336390. Interested parties must submit their responses by November 17, 2026, to support prime contractors in fulfilling their DLA supply obligations.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Supply of Air Brake Chambers (NSN 2530-21-914-4106)This subcontract involves the sourcing and supply of air brake chambers identified by NSN 2530219144106 to support prime contractors fulfilling DLA supply contracts. Managed by the Department of Defense under the DLA Weapons Support Strategic Acquisition Program Directorate, the agreement falls under NAICS code 336390. The contractor is responsible for ensuring all items are delivered FOB Origin. Strict adherence to packaging and labeling standards is required, specifically ASTM D3951 for non-hazardous items, TQ requirement IP025 for hazardous materials, and MIL-STD-129 for all marking and labeling.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE7L5-27-T-0459

Solicitation SPE7L5-27-T-0459 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supplier Opns Engines for the procurement of two spare tire retainers, identified by NSN 2590016084933 and Oshkosh Defense LLC part number 3815893. The required delivery date and need ship date are both set for June 14, 2027, with a delivery lead time of 212 days after the order date. The items are to be delivered FOB Origin under the First Destination Transportation program to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 and RP001, with general preservation following ASTM D3951, although the DLA Master List of Technical and Quality Requirements takes precedence. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various federal regulations, such as the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards. The solicitation also incorporates specific FAR clauses regarding equal opportunity for workers with disabilities, combating trafficking in persons, and hazardous material identification.

Defense Logistics Agency

POSTED

DEADLINE

VALVE, HEATER CONTROL, V

Solicitation # SPE7L1-27-Q-0137

Solicitation SPE7L1-27-Q-0137 is a small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of 479 heater control valves, identified by NSN 2540-01-670-4332. The items must conform to TDP Rev B Gen 3 and reference drawing 19207 12612043 Revision A. Delivery is required within 96 days after receipt of order, with the destination point located in Tracy, California. Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contract includes stringent technical and security requirements, including compliance with the DLA Master List of Technical and Quality Requirements and CMMC Level 2 certification. Because the item involves a restricted technical data package via an Oshkosh Defense, LLC license agreement, eligible offerors must possess an approved US/Canada Joint Certification Program certification and adhere to strict export controls under ITAR or EAR regulations. Packaging must comply with MIL-STD-129 and RP001, with specific guidelines for hazardous and non-hazardous materials. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

Defense Logistics Agency

POSTED

DEADLINE

MIRROR ASSEMBLY, REARVI

Solicitation # SPE7LX-27-U-0461

Solicitation SPE7LX-27-U-0461 is a small business set-aside issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of right-hand side rear view mirror assemblies, identified by NSN 2540015779759. The requirement is for an estimated quantity of 98 units with a delivery window of 159 days after the order. This procurement may result in an Indefinite Delivery Contract for a one-year period, with a maximum order value of 350,000.00 dollars. The contract is managed under the First Destination Transportation program with shipping terms set as FOB Origin, while inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 and DLA packaging requirements RP001 and IP025, with non-hazardous materials following ASTM D3951. Technical compliance is required per the DLA Master List of Technical and Quality Requirements, and the use of additive manufacturing is prohibited without specific approval. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions, and the prohibition of covered defense telecommunications equipment.

Defense Logistics Agency

POSTED

DEADLINE

CYLINDER ASSEMBLY, REAC

Solicitation # SPE7L4-27-T-0475

Solicitation SPE7L4-27-T-0475 is a request for quotation issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of two Cylinder Assembly, Reaction units, identified by NSN 2540016249487. The requirement specifies adherence to Basic Drawing NR 5B5M3 11B5190831 Revision B and associated reference drawings. Delivery is required within five days after order, with an original required delivery date of October 20, 2026. The terms are FOB Origin, with inspection and acceptance occurring at the destination in Fort Campbell, Kentucky. A Certificate of Conformance is mandatory for this acquisition. The contract incorporates strict quality and technical standards, including the DLA Master List of Technical and Quality Requirements and specific sampling plans under MIL-STD-1916 or MIL-STD-105/ASQ Z1.4. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with additional requirements for hazardous materials per IP025 and the Hazard Communication Standard. This is not a small business set-aside, although a price evaluation preference is available for certified HUBZone Small Business Concerns. Offerors must submit quotes via the DIBBS system by November 2, 2026, and are prohibited from using additive manufacturing processes unless specifically authorized.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 10 hours ago

DEADLINE

in 3 days

AI Contract Overview

The Department of National Defence for the Government of Canada is seeking a subcontractor for the manufacture or sourcing of six sets of BUFFER, part number 3542213. The required components must be functionally equivalent to existing Canadian Forces equipment in terms of form, fit, function, and quality. To ensure rigorous standards, the supplier must provide full traceability and maintain ISO 9001:2015 compliance. This subcontract opportunity is categorized under NAICS code 336390, with performance locations situated in British Columbia and Nova Scotia. Interested parties must submit their responses by the deadline of January 27, 2026.

General Info

Agency

Government of Canada → Department of National Defence

NAICS

336390 - Other Motor Vehicle Parts Manufacturing

Place of Performance

British Columbia, Nova Scotia, CAN

Set-Aside

NONE

Documents

This scope was carved out of W8482-263972/A.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BUFFER

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJan 12

subcontract

Response DeadlineJan 27

Deadline has passed

Submission Closed

01/27/2026, 07:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / AgencyGovernment of Canada → Department of National Defence

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture or sourcing of 6 sets of BUFFER (Part Number: 3542213) that are functionally equivalent to existing Canadian Forces equipment in form, fit, function, and quality, with full traceability and ISO 9001:2015 compliance.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Manufacture and Supply of BUFFER (PN 3542213)

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

AI Contract Breakdown

No documents to break down

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Government of Canada → Department of National Defence

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open