Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Floor-Mounted Return Air Grille Securing Services

Active

International

Response Deadline11/16/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing specialized inspection and mechanical securing services for floor-mounted return air grilles within residential housing projects for the Canadian Forces Housing Agency in Borden, Ontario. The scope of work requires the installation of threaded inserts, sleeves, and anchor fittings into flooring to ensure grilles are firmly secured with corrosion-resistant screws while remaining removable. A critical requirement of the project is to ensure that no damage occurs to the hardwood flooring during the installation process. Managed under the Department of National Defence for the Government of Canada, the project falls under NAICS code 238220. The contract requires the delivery of fully secured return air grilles across all designated units. Interested parties should note the response deadline of November 16, 2026, for this performance location in Ontario.

General Info

Inspection and securing return air grilles for CFHA residential housing in Borden, Ontario.

Agency

Government of Canada → Department of National Defence

NAICS

238220 - Plumbing, Heating, and Air-Conditioning Contractors

Place of Performance

Ontario (except NCR), CAN

Set-Aside

NONE

Documents

This scope was carved out of AB3702-0026.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CFHA - Inspection and securing of return air grilles - HSC Borden

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 07:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / AgencyGovernment of Canada → Department of National Defence

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs inspection and mechanical securing of floor-mounted return air grilles for prime contractors on Canadian Forces Housing Agency residential housing projects in Borden, Ontario. Installs threaded inserts, sleeves, and anchor fittings into flooring to secure grilles with corrosion-resistant screws while maintaining removability. Ensures no damage to hardwood flooring. Delivers fully secured return air grilles across designated units.

Similar Contracts

Same NAICS industry code

Water Pump Replacement

Solicitation # water-pump-replacement

The Cassadaga Job Corps Center in New York is soliciting bids for a water pump replacement project at their Pump House. The scope of work involves removing existing end suction centrifugal pumps and check valves to install a new booster pump system featuring two pumps with variable speed drives and automatic tower fill valves. The project also requires the installation of a hydro pneumatic expansion tank, 3 inch Type L copper piping with sweat fittings, and fiberglass insulation on all piping, concluding with final testing and factory startup. This solicitation is set aside for various small business categories, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone certified small businesses. Interested parties must submit their responses by November 30, 2026. The primary point of contact for this opportunity is Derrick Dickerson.

Cassadaga Job Corps Center

POSTED

about 4 hours ago

DEADLINE

CBP#9772 HVAC Air Handling Unit (AHU) and Ductwork Cleaning Services

Solicitation # CBP#9772

Management & Training Corporation (MTC) is soliciting bids for solicitation CBP#9772 to provide HVAC Air Handling Unit (AHU) and ductwork cleaning services at the Edison Job Corps Center in Edison, New Jersey. This fixed-price, single lump sum subcontracting opportunity has an estimated value between $100,000 and $250,000. The scope of work requires the thorough cleaning of twelve AHUs and twenty-eight coils across the Kilmer and Edison dormitories, including the cleaning of all associated supply, return, and outside-air ductwork and air distribution components. The contractor is responsible for pre-cleaning inspections, installing durable access panels, performing all necessary ceiling repairs and painting, and providing a final project report with before-and-after documentation. Bids are due by November 17, 2026, and will be awarded based on overall best value. A mandatory physical site visit and signature on the attendance roster are required prior to bid submission. For projects valued at $25,000 or more, bidders must provide a bid bond guarantee of 20% of the base bid, and the awarded contractor must provide performance and payment bonds from a surety company with at least an A- rating. The project must be completed within 90 consecutive business days following a written Notice to Proceed. Compliance requirements include adherence to Davis-Bacon prevailing wage rates for Middlesex County and various Federal Acquisition Regulation (FAR) clauses based on contract value, including reporting executive compensation for awards over $40,000 and protecting government interests regarding debarred subcontractors for awards over $45,000. All subcontractors must provide a UEI number and self-certify their business size and socioeconomic category. Final acceptance of the work is contingent upon a successful inspection by the Center and the submission of all required electronic documentation.

Edison Job Corps

POSTED

about 4 hours ago

DEADLINE

CBP7787 ED1 RM 123 HVAC Compressor Replacement

Solicitation # CBP7787 ED1 RM 123

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to replace a failed HVAC/refrigeration compressor at the ED1 Building of the Sierra Nevada Job Corps Center in Reno, Nevada. The project scope is divided into four phases: preparation and environmental safety, demolition and removal, installation of an OEM-specified compressor and related components, and system testing and commissioning. The estimated price range for the project is between 0 and 25,000 dollars. Bids must be submitted using the MTC Bid for Lump Sum Contract form and include a detailed cost breakout on the bidder's letterhead. The deadline for submission is November 17, 2026, by 3:00 PM PST. Award will be based on overall best value, and a physical site visit is mandatory prior to bidding. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent of the base bid, as well as performance and payment bonds from a surety with at least an A- rating, are required. Contractors must comply with EPA Section 608 regulations for refrigerant recovery and adhere to the specified wage determinations for Washoe County, Nevada. Required insurance includes general liability with a minimum limit of 1,000,000 dollars and worker's compensation with employer's liability limits of at least 500,000 dollars. Final payment is contingent upon a successful final inspection, submission of two sets of operation and maintenance manuals, and the provision of certified payroll reports and lien releases.

Sierra Nevada Job Corps Center

POSTED

about 4 hours ago

DEADLINE

MJCC Multiple HVAC Replacement System

Solicitation # mjcc-multiple-hvac-replacement-system

Education & Training Resources is seeking quotes for a turnkey subcontracting project to replace multiple HVAC systems at the Montgomery Job Corps Center in Montgomery, Alabama. The scope of work involves the removal of existing equipment and the installation, testing, and commissioning of new units across several buildings, including systems ranging from 3.5 to 10 tons. Technical specifications require the use of R-454B refrigerant, Energy Star ratings, and compliance with the National Electrical Code, NFPA Standard No. 101, and OSHA regulations. Contractors must provide a 5-10 year warranty on parts and a 2-year warranty on workmanship, and they are required to engage testing and balancing services to verify airflow. This is a small business set-aside opportunity open to various SBA-certified categories, including VOSB, SDVOSB, WOSB, and HUBZone small businesses. Bids are due by November 27, 2026, at 12:00 PM CST. To be considered, applicants must submit a completed bid sheet with a detailed cost breakdown, a proposed service schedule, Alabama state licensing, certificates of insurance, and a W-9. The winning bidder must maintain an active SAM.gov registration and a Unique Entity ID. Award selection is at the sole discretion of ETR and is not based solely on the lowest price. The project is subject to several federal regulations, including the Davis-Bacon Act for prevailing wages and the Service Contract Act. Bonding requirements are tiered based on project value: projects between 35,000 and 150,000 dollars require a 100 percent payment bond and additional payment protection, while projects exceeding 150,000 dollars require both 100 percent performance and payment bonds. Final payment is contingent upon the submission of a signed punch list and applicable warranties.

Montgomery Job Corps Center

POSTED

about 4 hours ago

DEADLINE

ACT-0124-00 BNATCS: Installation of two (2) existing Chillers Bldg. 366 at the Willima J. Hughes Technical Center, Atlantic City, NJ

Solicitation # act-0124-00-bnatcs-installation-two-2-existing-chillers-bldg-366-willima-j-hughes-technical-center

This solicitation, managed by PTSI Managed Services Inc., involves the installation of two existing chillers at Building 366 of the William J. Hughes Technical Center in Atlantic City, New Jersey. The scope of work encompasses the provision of electrical power, control interface connections, chilled water piping, and the final start-up of the equipment. The estimated magnitude of construction for this project is valued between 250,000 and 500,000 dollars. The project is designated as a small business set-aside, welcoming bids from SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. The primary NAICS code associated with the requirement is 238220, though 238210 and 238290 are also anticipated. Interested parties must submit their responses by the deadline of November 18, 2026.

PTSI Managed Services Inc.

POSTED

about 4 hours ago

DEADLINE

Centennial Dry Sprinkler System & Compressor Replacement Services

Solicitation # centennial-dry-sprinkler-system-compressor-replacement-services

Management & Training Corporation is soliciting bids for a fixed-price, single lump sum subcontract to provide dry-type sprinkler system and compressor replacement services at the Centennial Job Corps Center in Nampa, Idaho. The project scope involves the demolition and removal of the existing dry system distribution piping network and failing air compressor, followed by the installation of new infrastructure in the Men's Dormitory, Women's Dormitory, and Recreation Building. All work must be performed by a licensed contractor certified in the State of Idaho and must adhere to NFPA 25 (2023 Edition) and other local, state, and national codes. The contractor is required to complete all work within 30 consecutive business days following the written Notice to Proceed. Bids are due by December 1, 2026, and must be submitted via email to Sandra Clore. A mandatory physical site visit and signature on the attendance roster are required for bid consideration. For bids totaling $25,000 or more, a bid bond guarantee of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from an A-rated surety company. The solicitation is set aside for HUBZone, Woman-owned, and Service-Disabled Veteran-owned small businesses. Award decisions will be based on overall best value, with a focus on bidder responsiveness. The contract is subject to strict federal regulatory requirements, including the Davis-Bacon Act for prevailing wage rates in Canyon and Gem Counties, and FAR clauses regarding contractor whistleblower rights, security requirements, and trafficking in persons. Contractors must provide a Unique Entity Identifier (UEI) and disclose debarment status for awards exceeding $45,000. Payment is contingent upon the submission of weekly certified payroll reports, and final payment requires a Notice of Final Completion, a certificate of release of liens, and the delivery of two complete sets of operation and maintenance manuals.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 4 hours ago

DEADLINE

Dorm Hot Water Tank Replacement – Glenmont Job Corps Center – S26-006

Solicitation # S26-006

Adams and Associates, Inc. is seeking qualified mechanical and plumbing contractors for solicitation S26-006 to replace domestic hot water storage tanks and associated equipment at the Glenmont Job Corps Center in Glenmont, New York. This subcontracting opportunity involves the removal and disposal of four existing 505-gallon tanks and the installation of four new 500-gallon insulated storage tanks, four heat exchangers, and one bronze Bell and Gossett circulator pump in the North Dormitory. The scope of work includes all necessary piping modifications, electrical disconnections and reconnections, insulation, rigging, and the provision of a temporary hot water heater to ensure the facility remains operational during the estimated construction period of two and a half to three weeks. Proposals are due by November 9, 2026, at 4:00 PM ET, following a site walkthrough on October 29, 2026. Award decisions will be based on a weighted evaluation of price (60 percent), quality (20 percent), past performance (10 percent), and schedule (10 percent), meaning the lowest price does not guarantee selection. Contractors must comply with New York State licensing, Davis-Bacon prevailing wage requirements, and specific insurance mandates, including a minimum of 1,000,000 dollars for Commercial General Liability and Automobile Liability. Required submission documents include a current W-9, a completed Vendor Questionnaire with UEI and NAICS code, and certificates of insurance. Payment terms are Net 30 days upon completion and receipt of invoice.

Adams and Associates, Inc.

POSTED

about 4 hours ago

DEADLINE

Roswell JCC – Male Dormitory Bldg. Water Source Heat Pump Replacement (20 units)

Solicitation # roswell-jcc-male-dormitory-bldg-water-source-heat-pump-replacement-20-units

The Career Systems Development Corporation is soliciting proposals for the total replacement of twenty ceiling-mounted water source heat pumps at the Roswell Job Corps Center Male Dormitory Building 558 in New Mexico. The project requires the removal and off-site disposal of failed units and the installation of new Bosch 1-ton units or an equivalent model. The scope of work includes all necessary ducting, electrical, thermostat wiring, flexible hoses, and pressure valves. Additionally, the contractor must perform critical safety upgrades by installing smoke dampers with fusible links in all vents leading into the plenum and ensuring all installed plenum materials are plenum rated. All work must comply with NFPA 101, NFPA 70, and applicable plumbing, mechanical, and building codes. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. The project is subject to the Davis Bacon Act Wage Determination NM20260014, requiring the submission and approval of weekly certified payroll reports prior to invoice payment. Proposals exceeding 100,000 dollars will require payment and performance bonding for 100 percent of the contract value. Submissions must include a detailed technical approach for safe completion, a full cost breakdown of materials, labor, and bonding, equipment cut sheets, warranty information, and a proposed payment schedule. Final deliverables include the delivery of operation manuals to the Facility Manager upon project completion.

Career Systems Development Corporation

POSTED

about 4 hours ago

DEADLINE

Exeter Job Corps Boiler Room Pump Replacement

Solicitation # exeter-job-corps-boiler-room-pump-replacement

The Exeter Job Corps is seeking a qualified contractor for the replacement of boiler room pump number two. The project requires the installation of a new TACO pump model TACF1511, along with the integration of new valves, fittings, gauges, and thermo-wells. Work will be performed in Rhode Island under NAICS code 238220. Eligible bidders must be licensed, insured, and possess an active UEI registration. This solicitation is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Responses are due by November 6, 2026.

Exeter Job Corps

POSTED

about 4 hours ago

DEADLINE

WOJC – Buried Domestic Hot Water (DHW) Pipe Repair

Solicitation # wojc-buried-domestic-hot-water-dhw-pipe-repair-0

Education & Training Resources is seeking quotes for a subcontracting opportunity to repair buried domestic hot water piping at the Westover Job Corps Center in Chicopee, Massachusetts. The scope of work involves providing all labor, materials, equipment, and supervision to locate, remove, and repair compromised piping up to 4 inches in diameter at two specific locations: behind Singletary Hall and on the east side of Harris Hall. The project requires adherence to industry standards, OSHA regulations, the National Electrical Code, and NFPA Standard No. 101. Bids must be submitted by November 6, 2026, and must include a detailed cost breakdown, a proposed service schedule, and proof of required Massachusetts licensing. Eligible bidders must be registered in SAM.gov with a Unique Entity ID and provide a W-9, business licenses, and a signed Vendor Acknowledgement form. Depending on the project value, bonding requirements range from a 100 percent payment bond for projects over 35,000 dollars to both performance and payment bonds for projects exceeding 150,000 dollars. The contractor must comply with federal and local prevailing wage laws, including the Davis-Bacon and Service Contract Acts, and submit weekly certified payroll reports. Award selection is at the sole discretion of ETR and is not based solely on the lowest bid. Final project acceptance by the center requires a signed punch list and the submission of all applicable warranties.

Westover Job Corps Center

POSTED

about 4 hours ago

DEADLINE

DETROIT JCC-2026-41 – PLUMBING, HEATING, COOLING & ELECTRICAL

Solicitation # detroit-jcc-2026-41-plumbing-heating-cooling-electrical

Serrato Corporation is seeking a licensed contractor to provide ongoing plumbing, heating, cooling, and electrical services for the Detroit Job Corps located at 11801 Woodrow Wilson in Detroit, Michigan. This solicitation, identified as detroit-jcc-2026-41, falls under NAICS code 238220 and is specifically set aside for small businesses, including certified veteran-owned, service-disabled veteran-owned, women-owned, and HUBZone small businesses. The solicitation was posted on November 2, 2026, with a response deadline of May 31, 2027. Interested parties should coordinate with the primary point of contact, Toni Robinson, to submit their proposals for these essential facility maintenance services.

Serrato Corporation

POSTED

about 4 hours ago

DEADLINE

CBP6729 Cafeteria Dishwasher Replacement

Solicitation # CBP6729

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to replace the cafeteria dishwashing system at the San Diego Job Corps Center in Imperial Beach, California. The project involves the removal and disposal of an existing Stero STPCW-ER-20 dishwasher and the installation of a new commercial-grade conveyor system capable of supporting meal service for 600 people, three times daily, seven days a week. The estimated contract value ranges from $25,000 to $100,000. Bidders must conduct a mandatory physical site visit and submit a comprehensive proposal including equipment specifications, a capacity justification, a detailed cost breakdown, and a project schedule. The contract is subject to strict federal regulations, including Construction Wage Rate Requirements (formerly Davis-Bacon Act), requiring the payment of prevailing wages and the submission of certified payroll reports. For bids equal to or exceeding $25,000, a bid bond of 20% of the base bid is required, along with performance and payment bonds from a surety company with at least an A- rating. Award decisions will be based on overall best value. Additionally, the contract incorporates various FAR clauses regarding small business utilization, Buy American requirements, and security standards. Final payment is contingent upon a substantial completion inspection, the resolution of a punch list, and the submission of a Notice of Final Completion.

San Diego Job Corps Center

POSTED

about 4 hours ago

DEADLINE

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Corrosion-Resistant Fastener and Anchor SupplyThis subcontract involves the supply of specialized corrosion-resistant fastening hardware for prime contractors working on Canadian Forces Housing Agency projects in Borden, Ontario. The scope of work includes providing threaded inserts, sleeves, anchor fittings, and compatible screws specifically designed for securing HVAC grilles to hardwood flooring. All materials must adhere to the quality assurance standards established by the Government of Canada. The contract is issued under the Department of National Defence and requires delivery of all hardware DDP to the project site. Interested parties should note the response deadline of November 16, 2026, for this procurement opportunity categorized under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 22 hours ago

DEADLINE

Preventive Maintenance & Calibration ServicesThis subcontract involves providing preventive maintenance and traceable calibration services for prime contractors working on Department of National Defence QETE projects. The scope of work includes performing periodic calibrations based on manufacturer recommendations, diagnosing hardware issues, and replacing defective components to ensure full operational capacity. All work must be performed using specialized calibration tools. The service provider is responsible for delivering detailed maintenance reports and traceable Certificates of Calibration. Performance will take place within the National Capital Region of Canada. This opportunity is categorized under NAICS code 811210 and is associated with the Government of Canada.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 22 hours ago

DEADLINE

Technical Training ServicesThis subcontract for Technical Training Services supports the Department of National Defence by providing specialized instruction for scientists and technicians working on QETE projects. The primary objective is to develop a workforce proficient in the safe and effective operation of BOCLE equipment through the use of dedicated training manuals and hands-on demonstrations with the BOCLE apparatus. The training sessions will be conducted on-site in Gatineau, Quebec, within the National Capital Region. This opportunity, categorized under NAICS code 611430, was posted on November 2, 2026, with a response deadline of November 11, 2026.

Professional and Management Development Training

POSTED

about 22 hours ago

DEADLINE

Installation, Commissioning & Site IntegrationThis subcontract involves the physical installation, commissioning, and site integration of BOCLE equipment for prime contractors supporting Department of National Defence QETE projects in Gatineau, Quebec. The scope of work includes the assembly, integration, and configuration of hardware, as well as connecting systems to utilities and power supplies via necessary cabling. All activities must be performed in strict compliance with the Canadian Electrical Code to deliver a fully functional system ready for operational use. The project is categorized under NAICS code 238210 and is located within the National Capital Region of Canada. Interested parties should note the response deadline of November 11, 2026, for this Government of Canada agency requirement.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 22 hours ago

DEADLINE

Specialized Software Licensing & SupportThis subcontract for Specialized Software Licensing and Support serves prime contractors on Department of National Defence projects specifically for the QETE organization. The agreement focuses on the delivery of licensed programs, installation media, and configuration control tracking for the BOCLE apparatus, including the provision of necessary APIs, plug-ins, adapters, and maintenance releases. The contract includes a comprehensive ten-year software support commitment to ensure long-term operational stability. In addition to technical support, the provider is responsible for delivering all relevant software documentation and user guides. Performance for this contract is centered in the National Capital Region of Canada.

Software Publishers

POSTED

about 22 hours ago

DEADLINE

BOCLE Apparatus & Accessories SupplyThis subcontract involves the manufacture and delivery of the Ball-on-Cylinder Lubricity Evaluator (BOCLE) apparatus and associated accessories for prime contractors working on Department of National Defence (QETE) projects. The equipment must be compatible with 110-120V/60Hz/15A single phase power and must strictly adhere to ASTM D5001 and ASTM D1655 standards. Additionally, all hardware is required to carry CSA or UL certification marks to ensure compliance with the Canadian Electrical Code. The project is managed by the Government of Canada and will be performed within the National Capital Region of Canada. Interested parties should note the response deadline of November 11, 2026, for this procurement opportunity categorized under NAICS code 334516.

Analytical Laboratory Instrument Manufacturing

POSTED

about 22 hours ago

DEADLINE

On-Site Motor Grader Maintenance ServicesThis subcontract for the Government of Canada's Department of National Defence involves providing on-site maintenance and repair services for motor grader equipment rentals. The selected provider is responsible for supplying all necessary labor, materials, and mobile repair tools to ensure equipment remains operational throughout the rental term, with service call responses required during standard working hours from 0800 to 1600. The project is based in Québec, Canada, and falls under NAICS code 811198. Interested parties must submit their responses by the deadline of November 17, 2026, at 16:00.

All Other Automotive Repair and Maintenance

POSTED

about 22 hours ago

DEADLINE

Heavy Equipment Hauling and LogisticsThis subcontract for Heavy Equipment Hauling and Logistics involves the round-trip transportation of heavy machinery to support prime contractors on Department of National Defence projects. The scope of work specifically requires the hauling of two motor graders to and from CFB Valcartier using heavy-haul trailers, with the final delivery destination located in Courcelette, Quebec. All logistics and transportation services must be executed in accordance with DDP Incoterms 2020. The opportunity is categorized under NAICS code 484220 and is associated with the Government of Canada. Interested parties must adhere to the response deadline of November 17, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

Motor Grader Equipment RentalThis subcontract involves the rental of two motor graders to support prime contractors conducting winter operations for the Department of National Defence at CFB Valcartier in Quebec. The required equipment must be fully operational and equipped with 16-foot blades, carbide cutting edges, automatic greasing systems, and climate-controlled cabs. To meet specific technical standards for winter environments, the graders must also support Snow Plus tires and winter side wings. The procurement process is managed under NAICS code 532490 for the Government of Canada. Interested parties must submit their responses by November 17, 2026, to ensure the delivery of machinery that adheres to all Department of National Defence technical specifications for the designated place of performance.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

about 22 hours ago

DEADLINE

Evaluation & Data Analytics Consultant (VR Platform)This subcontract opportunity is for an Evaluation and Data Analytics Consultant to support prime contractors on Department of National Defence projects within the National Capital Region. The selected consultant will be responsible for conducting formal effectiveness evaluations of a Virtual Reality platform, utilizing statistical methods to analyze usage data, and performing detailed economic assessments and cost-benefit analyses. The primary deliverables for this engagement include comprehensive statistical analysis reports and a final evaluation report. Qualified candidates must hold a ProServices qualification category 9.12 at the Senior or Principal Level. The solicitation was posted on November 2, 2026, with a response deadline of November 17, 2026. This requirement falls under NAICS code 541611 and is focused on providing high-level professional evaluation and data analytics services to the Government of Canada.

Administrative Management and General Management Consulting Services

POSTED

about 22 hours ago

DEADLINE

Solicitation # W6369-27-A018

The Department of National Defence, on behalf of the Canadian Forces Health Services, is seeking one Senior Evaluation Services Consultant under the ProServices Supply Arrangement (Resource Category 9.12) to support the evaluation of a Virtual Reality Platform. The consultant will provide evaluation services, statistical analysis, economic assessment, and reporting over a six-month period from December 1, 2026, to June 1, 2027. The estimated level of effort for this requirement is 30 days, and the work can be performed fully remotely. This solicitation is open only to qualified Canadian suppliers with an active ProServices qualification in the specified resource category. The contract will be awarded based on the highest responsive combined rating of technical merit and price. Evaluation is based on the individual qualifications and experience of a single proposed resource, as the credentials of multiple resources cannot be combined to meet mandatory requirements. All deliverables and communications must be in English. The submission deadline is November 17, 2026, with the contracting authority identified as Noémy Dubois.

Administrative Management and General Management Consulting Services

POSTED

about 22 hours ago

DEADLINE

CFHA - Inspection and securing of return air grilles - HSC Borden

Solicitation # AB3702-0026

The Department of National Defence, through the Canadian Forces Housing Agency, is soliciting proposals for the inspection and securing of existing floor-mounted return air grilles within Residential Housing Units at the Housing Services Centre in Borden, Ontario. The scope of work requires the contractor to provide all necessary labor, materials, and equipment to inspect grilles and supporting construction, install appropriate fastening devices such as threaded inserts or anchor fittings, and secure the grilles using corrosion-resistant screws. This ensures that grilles can be removed and reinstalled for future maintenance without damaging the flooring. The contract period extends from the date of award through March 31, 2027. The contract will be awarded to the compliant offeror with the lowest evaluated price, provided they meet all mandatory solicitation requirements. Proposals must be submitted in Canadian dollars and include a technical proposal, an offer submission form, and an offeror declaration form. Payment will be made via direct deposit upon the successful delivery and acceptance of work by Canada. There are no security requirements associated with this procurement, although the contractor must adhere to Canada Occupational Health and Safety Regulations and the Canada Code of Conduct for Procurement. All deliverables are to be provided Delivery Duty Paid to the destination in Borden, Ontario.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 22 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS