Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Corrosion-Resistant Fastener and Anchor Supply

Active

International

Response Deadline11/16/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of specialized corrosion-resistant fastening hardware for prime contractors working on Canadian Forces Housing Agency projects in Borden, Ontario. The scope of work includes providing threaded inserts, sleeves, anchor fittings, and compatible screws specifically designed for securing HVAC grilles to hardwood flooring. All materials must adhere to the quality assurance standards established by the Government of Canada. The contract is issued under the Department of National Defence and requires delivery of all hardware DDP to the project site. Interested parties should note the response deadline of November 16, 2026, for this procurement opportunity categorized under NAICS code 332722.

General Info

Supply corrosion-resistant HVAC fastening hardware for Canadian Forces Housing Agency projects in Borden.

Agency

Government of Canada → Department of National Defence

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

Ontario (except NCR), CAN

Set-Aside

NONE

Documents

This scope was carved out of AB3702-0026.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CFHA - Inspection and securing of return air grilles - HSC Borden

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 07:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / AgencyGovernment of Canada → Department of National Defence

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized corrosion-resistant fastening hardware for prime contractors on Canadian Forces Housing Agency projects in Borden, Ontario. Provides threaded inserts, sleeves, anchor fittings, and compatible corrosion-resistant screws for securing HVAC grilles to hardwood flooring. Materials must meet Government of Canada quality assurance standards. Delivers hardware DDP to the project site.

Similar Contracts

Same NAICS industry code

Transit Vehicle Hardware and Sensor SupplyThe Transit Vehicle Hardware and Sensor Supply subcontract involves the provision of essential vehicle maintenance components, including various clamps, washers, and sensors. These materials are intended for prime contractors working on projects for the Southwest Ohio Regional Transit Authority (SORTA). The scope of work is strictly defined by the inventory hardware listed in the Bid Pricing Form and requires full compliance with 49 U.S.C. Section 5325(j)(2)(D). This procurement opportunity falls under NAICS code 332722 and is managed through the state of Ohio. Interested parties must adhere to the specified delivery requirements for all hardware and sensor components to support ongoing transit vehicle maintenance operations.

POSTED

about 8 hours ago

DEADLINE

in about 13 hours

Supply of Tightening Bolt Assembly (NSN 4420-01-504-6304)This subcontract involves the supply of 21 tightening bolt assemblies, specifically NSN 4420-01-504-6304 from Fluid Handling LLC, to support prime contractors for DLA Distribution San Joaquin. The work is performed under NAICS code 332722 with the place of performance located in Tracy, California. The contractor must adhere to strict military specifications, including packaging per RP001 and ASTM D3951 and marking per MIL-STD-129. Additionally, the agreement mandates full compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards to ensure national security and quality requirements are met.

DLA DIST SAN JOAQUIN

POSTED

about 10 hours ago

DEADLINE

Supply of Self-Locking Hexagon NutsThis subcontract involves the procurement or manufacture of 72 self-locking hexagon nuts matching NSN 5310-01-723-3029 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring all items comply with the Buy American Act and the Nonmanufacturer Rule. The completed order must be packaged and shipped using traceable methods to the Portsmouth Naval Shipyard GF in Portsmouth, zip code 03801-5000. This requirement falls under NAICS code 332722 and is intended for prime contractors delivering on DLA supply contracts.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Manufacture of Continuous Thread Stud (NSN 5307-01-652-8969)This subcontract involves the manufacture and supply of continuous thread studs for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected provider must fabricate hardware according to NSN 5307-01-652-8969 specifications using precision threading machinery. Quality assurance is critical, requiring inspections performed per MIL-STD-105/ASQ Z1.4 and strict adherence to MIL-STD-2073-1E and MIL-STD-129 packaging standards. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 certification and hold US/Canada Joint Certification. Full compliance with ITAR and EAR regulations is mandatory. The scope of work culminates in the delivery of one inspected and marked stud, with a response deadline set for November 10, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Manufacture of Plain Castellated Hexagon Nuts (NSN 5310002687292)This subcontract involves the manufacture of 1,034 plain castellated hexagon nuts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The production process requires precision machining and forming using CNC machining or cold-heading equipment in strict accordance with NASM310 Revision 2 and FF-N-836F(1) Revision F. Quality assurance must be conducted through sampling per MIL-STD-1916 or ASQ H1331, and all finished products must be packaged according to MIL-STD-2073-1E and MIL-STD-129. The project is governed by the Buy American Act and falls under NAICS code 332722. Performance will take place at Robins Air Force Base. Interested parties should note the response deadline of November 10, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Precision Manufacturing of Turbine Nut AssembliesThis subcontract involves the precision manufacturing of two flight-critical turbine nut assemblies for the DLA Weapons Support ASC Commodities Division. The selected manufacturer will utilize precision CNC machining and assembly to produce NSN 5310-01-014-6048 in accordance with limited rights technical data. Notably, the use of additive manufacturing processes is strictly prohibited for this project. To be eligible, the contractor must maintain ITAR and EAR compliance and hold certification under the US/Canada Joint Certification Program. The work is associated with NAICS code 332722 and will be performed in Tracy, California. Responses to this solicitation are due by November 10, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Manufacturing of Special High Strength Shear Bolts (NSN 5306-00-708-7672)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the manufacturing of special high-strength shear bolts identified by NSN 5306-00-708-7672. The contractor is responsible for fabricating these bolts using precision CNC machining and ensuring they meet strict quality standards. This includes performing stress durability testing according to NASM1312-5 through strain gage, external loading, or elongation methods, and applying all necessary markings in compliance with MIL-STD-130N and RQ017. The project is designated as a Total Small Business Set-Aside under NAICS code 332722. Final deliverables consist of the finished shear bolts accompanied by a Certificate of Quality Compliance. The solicitation was posted on November 2, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Precision Machining - Shoulder Bolts (NSN 5306-01-499-9030)This subcontract involves the precision machining of 13 critical application shoulder bolts for the DLA Weapons Support ASC Commodities Division. Production must strictly adhere to Basic Drawing NR 53711 7066791, Revision A, and the DLA Master List of Technical and Quality Requirements. The manufacturing process requires the use of precision CNC machining, while additive manufacturing is explicitly prohibited. To be eligible, the contractor must maintain SAE AS9003 or ISO 9001 quality systems, CMMC Level 2, and JCP certification. The final deliverable consists of 13 finished and inspected shoulder bolts, with performance taking place in New Cumberland. The response deadline for this opportunity is November 10, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Screw Thread Insert Manufacturer/SupplierThis subcontract involves the manufacture and supply of nine precision-machined screw thread inserts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for producing or sourcing parts that strictly adhere to the dimensions and material specifications of NSN 5325017183979, as outlined in the DLA Master List of Technical and Quality Requirements. Production must utilize CNC machining and thread-forming equipment to ensure technical accuracy. Compliance is mandatory regarding the Buy American Act and quality standards, specifically MIL-STD-1916 or ASQ H1331. The project falls under NAICS code 332722 and specifies Camp Lejeune as the place of performance. Interested parties must respond by November 10, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Loop Clamps (NSN 5340-01-666-6563)This subcontract, issued by the Department of Defense under the DLA Weapons Support Strategic Acquisition Program Directorate, requires the supply of loop clamps identified by NSN 5340016666563. The contractor must provide items matching part numbers 0236-0450-0112 or 5428K25, or alternatively, submit a complete data package to validate an alternate part. All deliveries must be shipped to DLA Direct within the continental United States and must strictly adhere to DLA unit of issue and packaging requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332722. Interested parties must submit their responses by November 17, 2026. This contract supports prime contractors tasked with delivering essential components for DLA Weapons Support operations.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 10 hours ago

DEADLINE

Manufacturer of Plain Hexagon Nuts (NSN 5310-01-661-2637)This subcontract involves the precision manufacture of plain hexagon nuts under NSN 5310-01-661-2637 for the DLA Weapons Support ASC Commodities Division. The manufacturer must adhere to MIL-DTL-1222J specifications, strictly avoiding additive manufacturing processes to ensure full supply chain traceability and rigorous product verification testing. Deliverables consist of 74 nuts packaged according to MIL-STD-2073-1E and MIL-STD-129 standards. To qualify, the contractor must maintain ISO 9001:2015 inspection systems and hold JCP certification to facilitate access to ITAR and EAR regulated data. The performance of this contract is centered in New Cumberland, Pennsylvania, with a response deadline set for November 10, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Metallic Bent Tubes (NSN 015485557)This subcontract opportunity, issued by the Department of Defense under the DLA Weapons Support Strategic Acquisition Program Directorate, involves the supply of precision-manufactured metallic bent tubes identified by NSN 015485557. The selected provider will be responsible for bending and forming metallic tubing to meet specific geometry requirements and ESA acceptability standards, delivering between 9 and 18 physical units. All items must be packaged according to ASTM D3951 standards using specialized tube bending machinery and mandrels. This is a total small business set-aside under NAICS code 332722. Interested parties must possess a valid CAGE code and active SAM registration to be eligible. The solicitation was posted on November 2, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 10 hours ago

DEADLINE

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Floor-Mounted Return Air Grille Securing ServicesThis subcontract involves providing specialized inspection and mechanical securing services for floor-mounted return air grilles within residential housing projects for the Canadian Forces Housing Agency in Borden, Ontario. The scope of work requires the installation of threaded inserts, sleeves, and anchor fittings into flooring to ensure grilles are firmly secured with corrosion-resistant screws while remaining removable. A critical requirement of the project is to ensure that no damage occurs to the hardwood flooring during the installation process. Managed under the Department of National Defence for the Government of Canada, the project falls under NAICS code 238220. The contract requires the delivery of fully secured return air grilles across all designated units. Interested parties should note the response deadline of November 16, 2026, for this performance location in Ontario.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 22 hours ago

DEADLINE

Preventive Maintenance & Calibration ServicesThis subcontract involves providing preventive maintenance and traceable calibration services for prime contractors working on Department of National Defence QETE projects. The scope of work includes performing periodic calibrations based on manufacturer recommendations, diagnosing hardware issues, and replacing defective components to ensure full operational capacity. All work must be performed using specialized calibration tools. The service provider is responsible for delivering detailed maintenance reports and traceable Certificates of Calibration. Performance will take place within the National Capital Region of Canada. This opportunity is categorized under NAICS code 811210 and is associated with the Government of Canada.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 22 hours ago

DEADLINE

Technical Training ServicesThis subcontract for Technical Training Services supports the Department of National Defence by providing specialized instruction for scientists and technicians working on QETE projects. The primary objective is to develop a workforce proficient in the safe and effective operation of BOCLE equipment through the use of dedicated training manuals and hands-on demonstrations with the BOCLE apparatus. The training sessions will be conducted on-site in Gatineau, Quebec, within the National Capital Region. This opportunity, categorized under NAICS code 611430, was posted on November 2, 2026, with a response deadline of November 11, 2026.

Professional and Management Development Training

POSTED

about 22 hours ago

DEADLINE

Installation, Commissioning & Site IntegrationThis subcontract involves the physical installation, commissioning, and site integration of BOCLE equipment for prime contractors supporting Department of National Defence QETE projects in Gatineau, Quebec. The scope of work includes the assembly, integration, and configuration of hardware, as well as connecting systems to utilities and power supplies via necessary cabling. All activities must be performed in strict compliance with the Canadian Electrical Code to deliver a fully functional system ready for operational use. The project is categorized under NAICS code 238210 and is located within the National Capital Region of Canada. Interested parties should note the response deadline of November 11, 2026, for this Government of Canada agency requirement.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 22 hours ago

DEADLINE

Specialized Software Licensing & SupportThis subcontract for Specialized Software Licensing and Support serves prime contractors on Department of National Defence projects specifically for the QETE organization. The agreement focuses on the delivery of licensed programs, installation media, and configuration control tracking for the BOCLE apparatus, including the provision of necessary APIs, plug-ins, adapters, and maintenance releases. The contract includes a comprehensive ten-year software support commitment to ensure long-term operational stability. In addition to technical support, the provider is responsible for delivering all relevant software documentation and user guides. Performance for this contract is centered in the National Capital Region of Canada.

Software Publishers

POSTED

about 22 hours ago

DEADLINE

BOCLE Apparatus & Accessories SupplyThis subcontract involves the manufacture and delivery of the Ball-on-Cylinder Lubricity Evaluator (BOCLE) apparatus and associated accessories for prime contractors working on Department of National Defence (QETE) projects. The equipment must be compatible with 110-120V/60Hz/15A single phase power and must strictly adhere to ASTM D5001 and ASTM D1655 standards. Additionally, all hardware is required to carry CSA or UL certification marks to ensure compliance with the Canadian Electrical Code. The project is managed by the Government of Canada and will be performed within the National Capital Region of Canada. Interested parties should note the response deadline of November 11, 2026, for this procurement opportunity categorized under NAICS code 334516.

Analytical Laboratory Instrument Manufacturing

POSTED

about 22 hours ago

DEADLINE

On-Site Motor Grader Maintenance ServicesThis subcontract for the Government of Canada's Department of National Defence involves providing on-site maintenance and repair services for motor grader equipment rentals. The selected provider is responsible for supplying all necessary labor, materials, and mobile repair tools to ensure equipment remains operational throughout the rental term, with service call responses required during standard working hours from 0800 to 1600. The project is based in Québec, Canada, and falls under NAICS code 811198. Interested parties must submit their responses by the deadline of November 17, 2026, at 16:00.

All Other Automotive Repair and Maintenance

POSTED

about 22 hours ago

DEADLINE

Heavy Equipment Hauling and LogisticsThis subcontract for Heavy Equipment Hauling and Logistics involves the round-trip transportation of heavy machinery to support prime contractors on Department of National Defence projects. The scope of work specifically requires the hauling of two motor graders to and from CFB Valcartier using heavy-haul trailers, with the final delivery destination located in Courcelette, Quebec. All logistics and transportation services must be executed in accordance with DDP Incoterms 2020. The opportunity is categorized under NAICS code 484220 and is associated with the Government of Canada. Interested parties must adhere to the response deadline of November 17, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

Motor Grader Equipment RentalThis subcontract involves the rental of two motor graders to support prime contractors conducting winter operations for the Department of National Defence at CFB Valcartier in Quebec. The required equipment must be fully operational and equipped with 16-foot blades, carbide cutting edges, automatic greasing systems, and climate-controlled cabs. To meet specific technical standards for winter environments, the graders must also support Snow Plus tires and winter side wings. The procurement process is managed under NAICS code 532490 for the Government of Canada. Interested parties must submit their responses by November 17, 2026, to ensure the delivery of machinery that adheres to all Department of National Defence technical specifications for the designated place of performance.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

about 22 hours ago

DEADLINE

Evaluation & Data Analytics Consultant (VR Platform)This subcontract opportunity is for an Evaluation and Data Analytics Consultant to support prime contractors on Department of National Defence projects within the National Capital Region. The selected consultant will be responsible for conducting formal effectiveness evaluations of a Virtual Reality platform, utilizing statistical methods to analyze usage data, and performing detailed economic assessments and cost-benefit analyses. The primary deliverables for this engagement include comprehensive statistical analysis reports and a final evaluation report. Qualified candidates must hold a ProServices qualification category 9.12 at the Senior or Principal Level. The solicitation was posted on November 2, 2026, with a response deadline of November 17, 2026. This requirement falls under NAICS code 541611 and is focused on providing high-level professional evaluation and data analytics services to the Government of Canada.

Administrative Management and General Management Consulting Services

POSTED

about 22 hours ago

DEADLINE

Solicitation # W6369-27-A018

The Department of National Defence, on behalf of the Canadian Forces Health Services, is seeking one Senior Evaluation Services Consultant under the ProServices Supply Arrangement (Resource Category 9.12) to support the evaluation of a Virtual Reality Platform. The consultant will provide evaluation services, statistical analysis, economic assessment, and reporting over a six-month period from December 1, 2026, to June 1, 2027. The estimated level of effort for this requirement is 30 days, and the work can be performed fully remotely. This solicitation is open only to qualified Canadian suppliers with an active ProServices qualification in the specified resource category. The contract will be awarded based on the highest responsive combined rating of technical merit and price. Evaluation is based on the individual qualifications and experience of a single proposed resource, as the credentials of multiple resources cannot be combined to meet mandatory requirements. All deliverables and communications must be in English. The submission deadline is November 17, 2026, with the contracting authority identified as Noémy Dubois.

Administrative Management and General Management Consulting Services

POSTED

about 22 hours ago

DEADLINE

CFHA - Inspection and securing of return air grilles - HSC Borden

Solicitation # AB3702-0026

The Department of National Defence, through the Canadian Forces Housing Agency, is soliciting proposals for the inspection and securing of existing floor-mounted return air grilles within Residential Housing Units at the Housing Services Centre in Borden, Ontario. The scope of work requires the contractor to provide all necessary labor, materials, and equipment to inspect grilles and supporting construction, install appropriate fastening devices such as threaded inserts or anchor fittings, and secure the grilles using corrosion-resistant screws. This ensures that grilles can be removed and reinstalled for future maintenance without damaging the flooring. The contract period extends from the date of award through March 31, 2027. The contract will be awarded to the compliant offeror with the lowest evaluated price, provided they meet all mandatory solicitation requirements. Proposals must be submitted in Canadian dollars and include a technical proposal, an offer submission form, and an offeror declaration form. Payment will be made via direct deposit upon the successful delivery and acceptance of work by Canada. There are no security requirements associated with this procurement, although the contractor must adhere to Canada Occupational Health and Safety Regulations and the Canada Code of Conduct for Procurement. All deliverables are to be provided Delivery Duty Paid to the destination in Borden, Ontario.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 22 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Supply of Sleeve Spacers

Department of National Defence

POSTED

DEADLINE

Stainless Steel Marine Hardware Supply

Department of Fisheries and Oceans

POSTED

DEADLINE

Supply of Plain Studs and Cap Screws

Department of National Defence

POSTED

DEADLINE

Multiple Victoria-Class Spares - KEY, MACHINE, STUD, PLAIN, SCREW, CAP

Solicitation # W8482-264649/A

Department of National Defence

POSTED

DEADLINE

Marine Hardware Supply

Department of Fisheries and Oceans

POSTED

CLOSED

Supply of Machine Bolts for Victoria-class Submarines

Department of National Defence

POSTED

about 2 months ago

CLOSED

Precision Fastener Supply for Victoria-Class Submarines

Department of National Defence

POSTED

about 2 months ago

CLOSED

Multiple Victoria-Class Spares : SCREW, MACHINE, BALL, JACK,SCREW,HAND, SCREW,CAP, SOCKET HEAD and WATER TESTING KIT,CHEMICAL AGENTS

Solicitation # W8482-275379/A

Department of National Defence

POSTED

about 2 months ago

CLOSED

Supply of Precision Screw Assortments (Bolts) – CFB Esquimalt

Department of National Defence

POSTED

CLOSED

Supply of Precision Screw Assortments (Bolts) – CFB Halifax

Department of National Defence

POSTED

CLOSED

SCREW ASSORTMENT

Solicitation # W8482-275412/A

Department of National Defence

POSTED

CLOSED

Control Knob Supply

Department of National Defence

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS