Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Manufacture and Supply of Spiral Wound Paper Shipping Tubes (156" x 2" x 1/4")

Active

Federal

Response Deadline08/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and supply of spiral wound paper shipping tubes measuring 156 inches in length, 2 inches in diameter, and 1/4 inch wall thickness, constructed entirely from 100 percent recycled paperboard with a minimum caliper of 3.3 pounds per point. Each tube must be covered with a 30/30/30 duplex asphaltic laminated paper to ensure durability and moisture resistance, and all units must be palletized for efficient and secure shipment. The solicitation is a Small Business Set Aside under the SBA program, reserved exclusively for small businesses, and falls under NAICS code 322219 for other paper product manufacturing. Performance of the contract is mandated to occur in Warner Robins, Georgia, with a response deadline of August 12, 2026, at 5:00 p.m., following a posting date of August 6, 2026. The awarding agency is the Department of Defense through DLA Distribution, indicating this is a defense-related subcontract requiring strict adherence to material specifications and delivery timelines.

General Info

Small business set aside for 156-inch recycled paper tubes, asphalt-laminated, palletized, delivery in Warner Robins by August 12, 2026.

Agency

Department Of Defense → DLA DistributionView Agency

NAICS

322219 - Other Paperboard Container ManufacturingView NAICS

Place of Performance

Warner Robins, GA, 31098, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 05:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Distribution

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA Distribution

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of spiral wound paper tubes using 100% recycled paperboard with minimum 3.3 lbs. per point caliper, covered with 30/30/30 duplex asphaltic laminated paper, and palletized for shipment.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7L1-26-T-944J

This contract under solicitation SPE7L1-26-T-944J specifies the procurement of 52 units of a COVER, ACCESS item with NSN 5340-01-322-3592, to be delivered FOB origin within 74 days of contract award with no variance allowed in quantity. All items must comply with strict technical, quality, and packaging standards including MIL-STD-2073-1E for preservation and MIL-STD-129 for marking, with no special markings required. The product is classified as a critical application item and must adhere to the technical drawing revision B dated 01/20/2023. Zero tolerance is enforced for non-conformances in sampling, requiring zero defects under MIL-STD-1916 or comparable zero-based plans, with attributes assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract prohibits the use of ozone-depleting chemicals and mercury or mercury-containing compounds in any part of the product, preservation, packaging, or marking, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and approved chemical reagents, all of which must incorporate secondary containment if used. Packaging must meet DLA’s requirements including palletization and shipping standards, with delivery directed to the specified warehouse in Tracy, CA. The contract enforces configuration change management and requires formal requests for any deviations or waivers. Quality assurance allows for a Certificate of Conformance unless overridden by a Quality Assurance Letter of Instruction. This is a total small business set-aside under NAICS 322219 with full and open competition, and all documentation references the DLA Master List of Technical and Quality Requirements. The delivery deadline is December 6, 2026, with an original ship date of November 3, 2026.

LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Manufacture and Supply of Spiral Wound Paper Shipping Tubes (156" x 4" x 1/4")The contract calls for the manufacture and supply of spiral wound paper shipping tubes measuring 156 inches in length, 4 inches in diameter, and with a wall thickness of one-quarter inch, using 100 percent recycled paperboard with a material specification of 3.3 pounds per point caliper and a 30/30/30 duplex asphaltic lamination. All tubes must be produced to the exact material standards outlined and delivered palletized to ensure proper handling and transport. The tubes are intended for use in shipping applications requiring robust, lightweight, and sustainable packaging solutions. This is a small business set aside subcontract under the SBA program, designated as a total set aside, meaning only small businesses are eligible to bid. The solicitation was posted on August 6, 2026, with a response deadline of August 12, 2026, at 5 p.m. The North American Industry Classification System code is 322219, indicating paperboard container manufacturing. Performance of the contract is required at Warner Robins, Georgia, 31098, under the oversight of DLA Distribution, a division of the Department of Defense, which is procuring these tubes to support logistical operations under a defense supply chain requirement.

DLA Distribution

POSTED

DEADLINE

Shipping Tubes (on Pallets) for DDWG

Solicitation # SP330026Q0233

The contract titled Shipping Tubes on Pallets for DDWG is a small business set aside under the SBA program specifically reserved for small businesses, with a NAICS code of 322219 indicating it pertains to other paperboard container manufacturing. It is issued by DLA Distribution under the Department of Defense and requires the delivery of various sized cardboard shipping tubes that must be fully palletized for shipment. The solicitation, identified by number SP330026Q0233, was posted on August 6, 2026, with a response deadline of August 12, 2026, at 5:00 PM Eastern Time. The place of performance is Warner Robins, Georgia, 31098, while the contracting office is located in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Michael Hayes Minto, reachable by phone at 717-770-6145 or email michael.minto@dla.mil, with Eric Hopkins listed as secondary contact at 717-770-3015 or eric.hopkins@dla.mil. This is a combined solicitation and award opportunity accessible via the SAM.gov portal.

DLA Distribution

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-150G

The contract solicitation SPE7L3-26-T-150G requests 191 flat springs with NSN 5360-00-884-4839 under the NAICS code 322219, with delivery required within 20 days of award. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes must be approved unless explicitly authorized by specification. Asbestos is banned from all supplied items, and any alternative materials must be approved in accordance with Clause L30 and Provision 4 conditions. Government identification must be removed from any non-accepted supplies. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense’s Land Supplier Operations Vehicle Support office, with Lee Miller as the primary point of contact.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-907H

This contract, under solicitation number SPE7L1-26-T-907H, requires the supply of one unit of item NSN 5340-01-433-1826, identified as COVER, ACCESS, with a unit price of $1.00 and a total price of $1.00. The item must be delivered FOB origin within 221 days of contract award, with no variance allowed in quantity. Inspection and acceptance occur at the destination, specifically at the DLA Distribution San Joaquin receiving warehouse in Tracy, California. Packaging must comply strictly with DLA’s Master List of Technical and Quality Requirements, overriding ASTM D3951 where applicable; non-hazardous materials must be commercially packaged per ASTM D3951 unless otherwise specified by DLA requirements, while hazardous materials must conform to Fed-Std-313 and TQ requirement IP025. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001: DLA Packaging Requirements for Procurement. The delivery is scheduled for March 24, 2027, with the same date as the original required delivery date. All communications and documentation must reference the official DLA unit of issue and follow DLA Procurement Notes C19 and C20 for transportation logistics. Primary point of contact for inquiries is Michael Nordahl at DLA FLBC2PRS, with solicitation response deadline set for August 14, 2026, and posting date of August 3, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

TUBE, BORE, VCI TREAT

Solicitation # SPE7L3-26-T-143Y

The contract solicitation SPE7L3-26-T-143Y calls for the procurement of 4,891 units of VCI-treated bore tubes with NSN 1005-00-336-0225, delivered FOB Origin to Fort Hood, Texas within 20 days of order receipt. The total estimated contract value is $11,151.48 at a unit price of $2.28, with no options or variations permitted. The item is subject to stringent technical, quality, and regulatory mandates including compliance with the DLA Master List of Technical and Quality Requirements, MIL-STD-129 for marking and packaging, and RP001 for packaging and palletization. Vapor corrosion inhibition (VCI) treatment is required as part of preservation, and all supplies must be inspected and accepted at the manufacturer’s origin by DLA’s Quality Assurance Representatives. Cybersecurity compliance is mandated through CMMC Level 2 certification, with contractors required to implement NIST SP 800-171 controls and adhere to DFARS 252.204-7012 for safeguarding covered defense information and reporting cyber incidents. The item contains technical data subject to ITAR or EAR export controls, restricting disclosure to foreign persons or entities not authorized under the US/Canada Joint Certification Program, with compliance to DFARS 252.225-7048 required. Demilitarization procedures for Category I munitions items as per DODM 4160.28-VOL.3 apply, and all components must comply with qualified products or manufacturer lists where applicable. Contractors must submit hazard warning labels for approval prior to award and conform to OSHA’s Hazard Communication Standard. The contract mandates electronic invoicing through Wide Area WorkFlow, payment via DoDAAC assignments, and full compliance with FAR and DFARS clauses including employment verification, trafficking prohibitions, subcontracting rules, and limitations on certain telecommunications equipment. Small business, HUBZone, and socioeconomic certifications are integral to eligibility, and all offerors must provide a valid UEI and CAGE code. Delivery must occur within the specified window under fixed-price terms, with no deviations allowed.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

SENSOR, ENGINE COOLANT

Solicitation # SPE7LX-26-U-9063

This contract, issued under solicitation number SPE7LX-26-U-9063 by the Department of Defense’s Strategic Acquisition Program Directorate, is a unilateral indefinite-delivery contract with a maximum value of $350,000, structured as a total small business set-aside under FAR 19.5 and NAICS code 322219. The primary deliverable is a sensor for engine coolant temperature, identified by NSN 2990-01-412-6821, with an estimated quantity of seven units per order and a delivery window of 50 days after order issuance. Delivery is FOB origin, with inspection and acceptance occurring at the destination under FAR 52.246-1. Packaging must comply with ASTM D3951, but all requirements in the DLA Master List of Technical and Quality Requirements supersede it; palletization must follow RP001 and labeling and marking must adhere strictly to MIL-STD-129 including UPCI barcoding. The contract is governed by a comprehensive set of FAR and DFARS clauses, including those on small business representation, employment equity, human trafficking prevention, cybersecurity safeguards, hazardous materials labeling, and cyber incident reporting. Contractors must submit Safety Data Sheets and hazard labels for any regulated materials prior to award, with failure to do so resulting in disqualification. Compliance with NIST SP 800-171 is mandatory for safeguarding covered defense information, and contractors must use Wide Area WorkFlow for electronic invoicing and payment processing. The solicitation mandates electronic submission via the DIBBS portal by August 12, 2026, and requires offerors to provide their Unique Entity Identifier and affirm their small business status along with any applicable socioeconomic certifications such as SDB, WOSB, SDVOSB, or HUBZone. All supplies are considered critical application items and must be delivered by approved vendors including Oshkosh Defense LLC, Rolls-Royce Solutions America Inc., and Link-Belt Cranes L.P., each with specified part numbers.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Vehicle Recompete: Idc 2031ZA22D00003This contract, identified as IDC vehicle 2031ZA22D00003, is a total small business set-aside with a ceiling value of approximately $2.65 million and an ordering period that concludes on March 13, 2027. It is managed by the Office of the Chief Procurement Officer under the Department of the Treasury. Although there are currently no active task orders associated with this vehicle, past task orders have been primarily awarded to Weber Marking Systems, Inc., focusing on the supply of various currency labeling products such as blank labels, label packs, and specific set D labels. These task orders have ranged in value, with the highest being $42,520 for blank labels and label packs. The contract is classified as a full-recompete opportunity with a high confidence rating, signaling a likely competitive solicitation process, targeted towards small business participation under NAICS code 322219, which pertains to printing and related services. This contract facilitates procurement related to pressure-sensitive currency bundles and cashpack labels, ensuring that the Treasury Department has continuing access to these specialized products over the duration of the contract. The place of performance and specific points of contact were not detailed in the available information.

Office Of The Chief Procurement Officer

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Distribution

Same awarding agency

Packaging, Marking, and Shipment Logistics

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Technical Documentation and Compliance Certification

Engineering Services

POSTED

DEADLINE

Supply of 24" Miter-Capable Up Cut Saw

Sawmill, Woodworking, and Paper Machinery Manufacturing

POSTED

DEADLINE

Supply of 24" Up Cut Saw (Standard Model)

Sawmill, Woodworking, and Paper Machinery Manufacturing

POSTED

DEADLINE

BATTERY PREVENTATIVE MAINTENANCE (BPM), MHE PREVENTATIVE AND CORRECTIVE MAINTENANCE SERVICES FOR DLA DISTRIBUTION NORFOLK, VA (DDNV)

Solicitation # SP330026Q0194

The contract solicits comprehensive preventative and corrective maintenance services for material handling equipment (MHE) and battery preventative maintenance (BPM) at the Department of Defense’s DLA Distribution Norfolk, Virginia facility. The effort is designated as a total small business set-aside under FAR 19.5, exclusively available to small businesses as defined by the SBA, and falls under NAICS code 811310 for industrial and commercial machinery and equipment repair and maintenance. Work performance is focused entirely in Norfolk, Virginia, with the contracting office located in New Cumberland, Pennsylvania. All responses must be submitted by August 14, 2026, at 5:00 PM Eastern Time, following a solicitation issued on July 15, 2026. The primary point of contact is Brian Keckler, reachable via phone or email, and the solicitation is published on SAM.gov under number SP330026Q0194.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

BNO Fire Fighter Uniforms for DDJC

Solicitation # SP330026Q0220

This contract is a single-award, Firm Fixed Price (FFP) procurement issued under solicitation SP330026Q0220 for the acquisition of Brand Name Only Fire Fighter Pants and Shirts, specifically Workrite part numbers FP50 and FSC2 NAV, with a total requirement of 69 pants and 57 shirts. The acquisition is fully set aside for small businesses under the SBA program and follows a Lowest Price Technically Acceptable (LPTA) evaluation methodology, meaning award will be made to the lowest-priced offeror whose proposal is deemed technically acceptable and has acceptable past performance. Technical acceptability is based strictly on conformance to the specified brand-name products, including physical, functional, and performance characteristics; any item produced using additive manufacturing will be rejected outright. All items must be delivered FOB Destination to DLA Distribution San Joaquin in Tracy, California, within 30 calendar days of receipt of a delivery order, and packaging and marking must comply with ASTM D3951-10 and MIL-STD-129R/P standards, including proper unitization of pallets, labeling of stock numbers, contract and delivery order numbers, and unit of issue quantities. All shipments require an Original Document Number (ODN) and a water-resistant envelope containing complete commercial shipping documentation. The contract mandates electronic submission of proposals in three separate files through email only, with no hard copy or fax submissions allowed, and responses must be received by August 14, 2026, at 1:00 PM Eastern Time. Proposals must include technical capability documentation, past performance references, and pricing with administrative data, including UEI, CAGE code, and compliance with SAM registration. Invoicing is exclusively through the Wide Area Workflow (WAWF) system, and payments will be processed by the Defense Finance and Accounting Service in Columbus, Ohio. Contractors must adhere to strict supply chain restrictions, including prohibitions on materials or products originating from the Xinjiang Uyghur Autonomous Region and from certain defense telecommunications equipment suppliers. Security provisions prohibit the use of unauthorized non-public information and restrict future participation in related DLA procurements to prevent organizational conflict of interest. No options, quantity adjustments, or key personnel requirements are included; the scope is fixed. All items are subject to inspection and formal acceptance at the destination site by the Government, and acceptance documentation must include the DD Form 250 or SF-1449. Compliance with export controls

Cut and Sew Apparel Contractors

POSTED

DEADLINE

Solicitation # SP330026Q0183

This solicitation, identified as SP330026Q0183 and titled DDWG Fans, is a firm-fixed-price purchase order issued by DLA Distribution under the Department of Defense for the procurement of industrial warehouse fans to be delivered to Warner Robins, Georgia. The acquisition is exclusively reserved for Service-Disabled Veteran-Owned Small Businesses under NAICS code 333413 and will be awarded via Standard Form 1449. The purpose of the purchase is to mitigate extreme heat conditions at Robins Air Force Base, ensuring worker safety, OSHA compliance, and uninterrupted production operations. The fans must meet strict technical specifications including physical dimensions of 36 1/2" x 37 7/8" x 18 5/8", compatibility with 120V, 208V, or 480V three-phase power systems, a minimum 10' 7" integrated power cord, a maximum operating noise level of 77 dB, and a totally enclosed motor design (TENV or TEFC) to resist dust and particulates. Safety features require OSHA-compliant finger guards to prevent blade contact. The solicitation was originally posted on June 9, 2026, with multiple amendments issued through June 24, 2026, extending the response deadline and incorporating additional documentation including the SF1449 form and CSS. No DPAS rating applies to this procurement, and while the place of performance is clearly identified, details regarding quantity, pricing, delivery schedule, period of performance, and inspection criteria are not specified in the available information. All offerors must be certified SDVOSBs and the award will be made to a single vendor based on compliance with technical requirements and pricing.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SP3300-26-Q-0242

The contract is for the procurement of two 24-inch up cut saws, one of which is miter capable, to be delivered to DLA Distribution at Red River, TX. The solicitation, numbered SP3300-26-Q-0242, was posted on August 7, 2026, with a response deadline of August 12, 2026, at 4:00 PM. It is classified as a combined solicitation and falls under a Small Business Set Aside - Total, meaning only small businesses are eligible to bid. The North American Industry Classification System code is 333243, indicating the scope relates to sawmill and wood product manufacturing machinery. The contracting office is based in New Cumberland, PA, under the Department of Defense, while the place of performance is in Texarkana, Texas, with a zip code of 75507. The primary point of contact for inquiries is Tom Semones, reachable via email at thomas.semones@dla.mil. The full solicitation details can be accessed through the SAM.gov portal using the provided link.

Sawmill, Woodworking, and Paper Machinery Manufacturing

POSTED

DEADLINE

5440 - K-Rail Barriers for San Joaquin

Solicitation # SP3300-26-Q-0241

The contract solicitation SP3300-26-Q-0241 for K-Rail Barriers for San Joaquin is a Small Business Set Aside under NAICS code 327390, reserved exclusively for small businesses. Issued by the Department of Defense through DLA Distribution, the solicitation was posted on August 7, 2026, with responses due by August 14, 2026, at 9:00 PM Eastern Time. The primary point of contact is Adam Pennartz, reachable at Adam.1.Pennartz@dla.mil. Performance of the contract will take place in Tracy, California, with a zip code of 95304, while the contracting office is located in New Cumberland, Pennsylvania. This combined solicitation seeks procurement of K-Rail barriers, which are essential for temporary traffic control and safety infrastructure, and is part of a broader Department of Defense logistics effort to support infrastructure and operational needs.

Other Concrete Product Manufacturing

POSTED

DEADLINE

DDSP Boiler Repairs - SP3300-26-Q-0221

Solicitation # SP3300-26-Q-0221

The U.S. government is seeking firm-fixed-price quotations for steam boiler repair and maintenance services at DLA Distribution Susquehanna in New Cumberland, Pennsylvania, under solicitation SP3300-26-Q-0221. The contract will be awarded as a single award using the Standard Form SF-1449 and is not subject to Defense Priorities and Allocations System requirements. This acquisition is unrestricted but includes a HUBZone price evaluation preference as mandated by FAR 19.110, and it is not set aside for small businesses. The North American Industry Classification System code is 238220 with a size standard of $19.0 million, and the Product or Service Code is J044. Responses must be submitted by July 29, 2026, at 9:30 PM ET, with the solicitation posted on July 22, 2026. The point of contact for inquiries is Michael French, reachable via email at michael.s.french@dla.mil. All detailed requirements are outlined in the attached Contract Specification Sheet.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Supply of Steel Strapping (1-1/4" x .031" x 836')The contract seeks the supply of steel strapping measuring 1-1/4 inches in width and .031 inches in thickness, with each unit containing 836 feet of material, manufactured from low carbon cold-rolled steel and excluding stainless or galvanized varieties. This requirement is issued under a subcontract classified as a SBA Certified Women-Owned Small Business (WOSB) program set-aside, ensuring eligibility and participation are restricted to businesses certified under the WOSB Program per FAR 19.15. The North American Industry Classification System code 332999 applies, indicating the scope falls under other fabricated metal product manufacturing. The solicitation was posted on August 6, 2026, with a firm response deadline of August 11, 2026, at 2:00 PM. The place of performance is specified as New Cumberland, though no further address details are provided. The contracting agency is DLA Distribution under the Department of Defense, indicating this procurement supports federal defense logistics needs. Interested vendors must respond within the stated window to compete for this opportunity, with all submissions subject to WOSB certification and compliance requirements.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of Steel Strapping (3/4" x .023" x 1,796')The contract specifies the supply of 240 units of low carbon cold-rolled steel strapping, each measuring 3/4 inch in width and .023 inch in thickness with a total length of 1,796 feet per unit, and a breaking strength of 2,070 pounds, equivalent to U-Line part number S-829. The product must meet exact technical specifications to ensure compatibility and performance in industrial applications, and the total quantity required is firmly defined for delivery under this agreement. This procurement is set aside exclusively for SBA-certified Women-Owned Small Businesses under the WOSB Program, reflecting a federal commitment to supporting minority-owned enterprises in defense-related supply chains. The solicitation is managed by the Defense Logistics Agency Distribution under the Department of Defense, with performance required at the New Cumberland location. The opportunity was posted on August 6, 2026, and responses are due by August 11, 2026, at 2:00 PM local time, creating a tight five-day window for interested contractors to prepare and submit bids. The NAICS code 332999 categorizes this as an other fabricated metal product manufacturing activity, emphasizing the specialized nature of the steel strapping and its production process. While no point of contact is listed, all submissions must be completed through the official SAM.gov portal linked in the solicitation.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE