This Government Contract opportunity from Government of Canada was posted on April 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Manufacture of Ball Valve, Angle-H Type

Closed

International

Submission Closed06/16/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332913

New

DIBBS

BUBBLER, DRINKING FOUNT

Solicitation # SPE8E8-26-T-4957

The contract is for the procurement of 120 units of a bubbling drinking fountain with part number 030774-006 and NSN 4510014733230, awarded under solicitation SPE8E8-26-T-4957 by the Defense Logistics Agency District San Joaquin. Delivery is required within 58 days of contract award, with all items to be shipped FOB origin and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific unit packaging, cushioning, and marking requirements, with no special marking codes applied. The item is classified as a critical application item and must adhere strictly to DLA packaging and technical requirements, including the prohibition of intentional use of mercury or mercury-containing compounds, except for specific exempted applications such as batteries, fluorescent lamps, and instrumentation meeting NAVSEA 5100-003D standards, which must include secondary containment. Delivery is to be made to the designated warehouse in Tracy, California, and transportation logistics follow DLA procedural notes C19 and C20. The contract specifies a zero variance on quantity, with a required delivery date of August 4, 2026, and solicitation responses due by August 17, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and source approval documentation must be submitted under RC001 for any non-conforming suppliers.

POSTED

DEADLINE

Solicitation # SPE8E8-26-T-4951

The contract is for the procurement of one floor drain with NSN/Part Number 4510-01-519-7819 under solicitation SPE8E8-26-T-4951, issued by the Defense Logistics Agency, a Department of Defense agency. The item must be delivered within 20 days after award, and the solicitation was posted on August 4, 2026, with responses due by August 17, 2026. The procurement is subject to DLA Packaging Requirements for Procurement and incorporates technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The place of performance is specified as Virginia Beach, Virginia, with a ZIP code of 23459-9309, and the primary point of contact is Alexis Selby, reachable via email and phone. The NAICS code 332913 indicates the classification for other fabricated metal product manufacturing. Government identification must be removed from non-accepted supplies in accordance with RQ011 requirements.

Defense Logistics Agency

POSTED

DEADLINE

MIL-STD-129 Marking and Barcoding ServicesThe contract requires the application of compliant 2D Data Matrix barcodes and markings on outer packaging in strict adherence to MIL-STD-129 standards, ensuring all required data elements such as NSN, CLIN, contract number, and other federal specifications are accurately and legibly encoded. This work is critical for traceability, inventory management, and compliance within Department of Defense supply chains, where precise labeling ensures seamless logistics and receipt processing. The contractor must meet all technical, formatting, and durability requirements defined by the standard to ensure readability across scanning systems used in military and government facilities. The solicitation is issued under the NAICS code 332913 for Other Miscellaneous Fabricated Metal Product Manufacturing and is structured as a subcontract opportunity managed by the Maritime Supply Chain office within the Department of Defense. The place of performance is designated as FPO with a ZIP code of 96349, indicating operations will likely serve naval or maritime logistics nodes. The response deadline is set for August 14, 2026, with the opportunity posted on August 3, 2026, and all proposals must be submitted through the DIBBS platform via the provided link to be considered. No set-aside type is specified, meaning the contract is open to all qualified businesses regardless of size or ownership classification.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Precision Machined Drain Cock ManufacturingThe contract requires the manufacture of a military-spec drain cock identified by NSN 4820001419165, with strict adherence to defense standards requiring full material and process traceability throughout production. All components must be manufactured to exacting tolerances and documented to ensure compliance with military specifications, and packaging must meet DLA requirements for handling, labeling, and preservation to maintain readiness during transport and storage. The product is intended for use within Department of Defense logistics systems and must be delivered to the specified FPO address with zip code 96629. This is a subcontract opportunity under NAICS code 332913, posted by the Defense Logistics Agency with a response deadline of August 14, 2026. Work must be completed in alignment with DLA procurement protocols, including documentation standards and delivery schedules. The solicitation is open to qualified subcontractors capable of meeting militarized manufacturing requirements, with no set-aside designation specified, and all submissions must be made through the designated DIBBS portal to be considered valid.

Defense Logistics Agency

POSTED

DEADLINE

Precision Manufacturing of Check Valves (NSN 4820016798732)The contract involves the precision manufacturing and supply of defense-grade check valves under the National Stock Number 4820016798732, requiring strict compliance with military specifications throughout all phases including material sourcing, machining, testing, and documentation. The work must be executed to meet the rigorous quality and performance standards mandated for defense applications, ensuring reliability and durability under extreme operational conditions. All deliverables must be fully traceable, with complete technical data packages and certification records provided to demonstrate adherence to applicable military standards. This is a subcontract awarded by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance located at the New Cumberland facility, ZIP 17070-5002. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026, indicating a compressed timeline for qualified suppliers to submit proposals. The NAICS code 332913 identifies the industry classification as other fabricated metal product manufacturing, confirming the specialized nature of the machining and fabrication required. The subcontract structure implies the winning vendor will support an existing prime contract or program, and all manufacturing processes must be conducted in compliance with defense procurement regulations and quality assurance protocols without exception.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

MIL-STD-129 Military Packaging and MarkingThis contract requires the application of military-standard markings on containers and packaging in strict compliance with MIL-STD-129 for shipments destined for the Defense Logistics Agency. All packaging must include barcode labeling, CAGE codes, National Stock Numbers, and Department of Defense Unique Identifier requirements to ensure full traceability and compliance across the DoD supply chain. The work is to be performed at the specified place of performance in Conneaut Lake, Pennsylvania, with a zip code of 16316-6661, and falls under the NAICS code 332913, indicating it relates to industrial mold manufacturing and related activities supporting defense logistics. The solicitation is open as a subcontract with a deadline for responses set for August 14, 2026, and the contracting entity is the Maritime Supply Chain ESOC Buys under the Department of Defense, requiring adherence to rigorous military packaging and labeling protocols for all delivered items.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE8E8-26-T-4779

The contract solicitation SPE8E8-26-T-4779 seeks 38 units of a double faucet identified by NSN 4510-00-483-5639 for delivery to DLA Distribution San Joaquin in Tracy, CA, with an actual delivery order (ADO) timeframe of 167 days, resulting in a required delivery date of September 25, 2026, and a need ship date of January 18, 2027. Delivery is FOB destination, and all shipments must comply with DLA packaging mandates under RP001 and MIL-STD-129 for marking and labeling, including unit of issue, quantity per pack, and hazard communication in accordance with 29 CFR 1910.1200, with hazard labels and Safety Data Sheets required to be submitted for review prior to award. Compliance with the DLA Master List of Technical and Quality Requirements supersedes general standards like ASTM D3951, and all packaging must meet palletization specifications outlined in RP001. The procurement is governed by a suite of FAR and DFARS clauses covering employment equity, trafficking in persons, employment eligibility verification, sustainable products, cybersecurity safeguards including safeguarding covered defense information and cyber incident reporting, export control, prohibited telecommunications equipment, hazardous material handling, whistleblower protections, and subcontractor payment acceleration. The contracting officer’s representative and contracting officer details are not provided, and payment must be processed through WAWF using the appropriate invoice type based on contract structure. Offerors must submit electronic proposals via DIBBS by August 6, 2026, and are required to self-certify small business status, socioeconomic designations including WOSB, HUBZone, and SDVOSB, provide Unique Entity IDs and CAGE codes if supplying covered defense telecommunications equipment, and disclose joint venture participant information. No pricing data is provided in the solicitation, and the contract value cannot be determined from the available information. Inspection and acceptance occur at the delivery point by the Government, using FAR 52.246-1 and the DLA Master List as the governing criteria for technical and quality compliance.

POSTED

DEADLINE

Solicitation # SPE8E8-26-T-4945

The contract pertains to the procurement of a Heater Probe Assembly with NSN 4540-00-068-1446, for a quantity of six units under Purchase Request 7017585443. Delivery is required within 156 days after award, and the solicitation number is SPE8E8-26-T-4945, issued by the Department of Defense through the Depot Oklahoma office located at Tinker AFB, Oklahoma. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and is classified under NAICS code 332913 for Other Engine Equipment Manufacturing. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and non-accepted supplies must have all government identification removed prior to return. The primary point of contact is Alexis Selby, reachable via email and phone provided, and further details can be accessed through the DIBBS portal.

POSTED

DEADLINE

Solicitation # SPE8E8-26-T-4775

The contract pertains to the procurement of 60 units of DRAIN, FLOOR with NSN 4510-00-945-7790, under a total small business set-aside solicitation numbered SPE8E8-26-T-4775, issued by the Defense Logistics Agency District San Joaquin. Delivery is required within 200 days after award, with FOB origin terms and final destination at 25600 S CHRISMAN ROAD, Tracy, CA 95304-5000. Technical data associated with this item is subject to export control under ITAR or EAR, and access is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DLA export control training, and formal approval by DLA. Compliance with DFARS 252.225-7048 is mandatory, and disclosure of technical data to foreign persons, regardless of location, is prohibited without authorization. The item must be packaged per MIL-STD-2073-1E using expanded security containers with Jiffy Crystals cushioning, palletized per DLA RP001, and marked according to MIL-STD-129 and MIL-STD-130N for identification and barcoding, with preservation requiring items to be thoroughly cleaned and dried. Acceptance occurs at the destination point, based on inspection criteria aligned with MIL-STD-1916 and ASQ Z1.4, with zero non-conformances required for critical defects. The contract includes a broad array of Federal Acquisition Regulation clauses governing payment acceleration for small business subcontractors, safeguarding of information systems, combating human trafficking, employment eligibility verification, sustainable products, hazardous materials handling, prohibition of hexavalent chromium, and restricted acquisition from Chinese military companies. Invoicing must be submitted exclusively via Wide Area WorkFlow, and all offers must be electronically submitted through DIBBS by the August 6, 2026 deadline. The solicitation mandates full compliance with safety, labeling, and documentation requirements, including submission of Safety Data Sheets for any hazardous materials and notification of radioactive content if applicable. Offerors must hold a valid UEI, maintain current SAM.gov registration, certify small business status, and comply with all representations outlined in Section K, particularly when participating in joint ventures. All contract terms are structured under a firm-fixed-price model with no specified unit pricing provided, and deviations

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-164U

The contract specifies the procurement of one cock and drain unit, part number 1100B52Z with NSN 4820-00-141-9165, under solicitation SPE7MC-26-T-164U, issued by the Defense Logistics Agency. The item must be delivered within 20 days to the USS CARL VINSON CVN 70 at FPO AP 96629, with delivery terms set as FOB destination and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item must be packaged in strict compliance with ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence over this standard. Packaging and labeling must conform to MIL-STD-129, and palletization must follow DLA’s RP001 packaging guidelines. The unit of issue is one each, and the shipment must use the fastest traceable means, explicitly prohibiting parcel post; transportation instructions reference DLAD PROC NOTE C19 and C20. The vendor must use VSM for RDD 777 shipments and reference the TCN R209933289E628. The original required delivery date was October 20, 2023, and the solicitation was posted August 3, 2026, with a response deadline of August 14, 2026. The primary point of contact is Paula McClary, and the NAICS code is 332913 for other fabricated metal product manufacturing.

Defense Logistics Agency

POSTED

DEADLINE

Manufacture of Exhaust Pipe (Firm-Fixed-Price Supply)The contract awards the manufacture and delivery of exhaust pipe assemblies under a firm-fixed-price supply arrangement, ensuring full compliance with federal and defense logistics specifications. The supplier is responsible for producing components that meet all technical, quality, and performance standards mandated by defense requirements, with strict adherence to packaging and labeling protocols to ensure proper identification and handling throughout the supply chain. Shipping must be conducted on an FOB Origin basis, meaning title and risk of loss transfer to the government upon delivery at the supplier’s facility, and all associated logistics are the contractor’s responsibility. Performance is to be completed at the designated location in New Cumberland, Pennsylvania, with a response deadline of August 13, 2026. The NAICS code 332913 identifies this as a metal fabrication enterprise specializing in other structural metal product manufacturing. This subcontract is issued by the Department of Defense under Land Supplier Operations Engines, and while no set-aside designation is specified, the procurement falls within the broader scope of defense supply chain readiness. All deliverables must be fully compliant with applicable military standards, and failure to meet specifications may result in rejection or financial penalties under the fixed-price terms.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Supply of 1/2-Inch Needle Globe ValvesThe contract calls for the procurement and delivery of three 1/2-inch needle globe valves, each rated for a maximum pressure of 1000 PSI and equipped with union ends, specifically for integration into LPD 24 reverse osmosis systems. These valves are critical components for precise flow control within high-pressure water purification infrastructure, and the specification demands strict adherence to pressure rating and connection type to ensure system integrity and operational reliability. The requirement is issued as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing a federal commitment to supporting smaller enterprises in defense-related supply chains. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, with performance expected to take place in San Diego, California, at the ZIP code 92136-3581. The North American Industry Classification System code 332913 identifies the category as Other Fabricated Metal Product Manufacturing, indicating the valves are to be manufactured or assembled by a specialized fabricator rather than a general industrial producer. The contracting authority is the Department of Defense through its San Diego office, underscoring the military context of the procurement. All bids must be submitted through the official DIBBS portal, and compliance with technical specifications, delivery timelines, and small business certification requirements is mandatory for award consideration.

SAN DIEGO

POSTED

2 days ago

DEADLINE

in 9 days

AI Contract Overview

The contract pertains to the manufacture of military-specification Ball Valve, Angle-H units intended for submarine applications, requiring adherence to stringent defense standards. Each unit must be produced with full traceability and accompanied by comprehensive quality documentation to ensure reliability and performance under extreme operational conditions. The valves must also be marked with STANAG 2290-compliant Unique Item Identification (UID) to meet Canadian and NATO tracking and inventory management requirements. The work is to be performed under a subcontract arrangement, with the Department of National Defence, Government of Canada, as the contracting authority, and the place of performance located in British Columbia. The solicitation was posted on April 29, 2026, with responses due by June 16, 2026, and the North American Industry Classification System code 332913 applies to the manufacturing activities involved.

General Info

Manufacture and supply military-spec Ball Valve, Angle-H units for submarines, meeting STANAG 2290 UID.

Agency

Government of Canada → Department of National Defence

NAICS

332913 - Plumbing Fixture Fitting and Trim ManufacturingView NAICS

Place of Performance

British Columbia, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedApr 29

subcontract

Response DeadlineJun 16

Deadline has passed

Submission Closed

06/16/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of new military-specification Ball Valve, Angle-H units for submarine applications, including full traceability, quality documentation, and STANAG 2290-compliant UID marking.