Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Manufacture of Corrosion Prevention Anodes (MIL-DTL-18001L)

Active

Federal

Response Deadline09/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture of 203 specialized corrosion prevention anodes for prime contractors supporting Department of Defense supply contracts. The anodes must be fabricated using casting or die-stamping processes to conform to MIL-DTL-18001L, CLASS 1, TYPE ZDM, 1.050 specifications. Each unit requires specific markings, including the manufacturer's symbol, a unique non-recurring heat number, and revision letter L. Due to the nature of the components as Critical Application Items, the manufacturer must maintain rigorous quality control systems. The project is managed under NAICS code 332410 and is associated with the ASC Supplier OE and AF Division, with the place of performance located in Tracy, California.

General Info

Manufacture 203 specialized corrosion prevention anodes per MIL-DTL-18001L specifications in Tracy, California.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332410 - Power Boiler and Heat Exchanger ManufacturingView NAICS

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-26-T-776R.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ANODE, CORROSION PREVEN

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 21

subcontract

Response DeadlineSep 28

Submission deadline

Response Deadline

09/28/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures specialized corrosion prevention anodes for prime contractors delivering DLA supply contracts. Fabricates anodes conforming to MIL-DTL-18001L, CLASS 1, TYPE ZDM, 1.050 using casting or die-stamping. Marks each unit with manufacturer's symbol, unique non-recurring heat number, and revision letter L. Requires quality control systems for Critical Application Items. Delivers 203 finished, certified anodes.

Similar Contracts

Same NAICS industry code

Boiler Safety Valve and Sensor SupplierThis subcontract for the Department of Forensic Science in Virginia involves the sourcing and delivery of critical safety components for pressure vessel relief. The supplier is responsible for providing Kunkle #6010FEE safety valves, Mini Peeper UV sensors, and flame detectors, ensuring all equipment adheres to OEM specifications and rigorous safety standards. The project is based in Mechanicsville and falls under NAICS code 332410. Interested parties must respond by September 29, 2026, to support prime contractors in the execution of these safety-critical installations.

Department of Forensic Science

POSTED

about 22 hours ago

DEADLINE

Aerospace Grade Material Supply for Structural PanelsThis subcontract involves the supply of raw aerospace-grade metals and composites for prime contractors working on DLA Aviation projects. The supplier is responsible for sourcing materials that strictly adhere to metallurgical specifications outlined in drawings 76823 2-70506, 76823 10Y201, and 76823 PL-2. To ensure full compliance with aerospace standards, the provider must deliver certified raw materials to the fabricator along with comprehensive Mill Test Reports and complete material traceability documentation. Managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, this opportunity is designated as a Total Small Business Set-Aside. The performance of the contract will take place in Tracy, California, under NAICS code 332410. Interested parties must respond by September 30, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

Supply of Aluminum Clips (NSN 5342003375485)This subcontract involves the manufacture and supply of 41,667 aluminum clips for the Department of Defense Aviation Supply Chain, specifically for NSN 5342003375485. The contractor is responsible for producing or sourcing these components using precision metal forming and stamping equipment to ensure all technical specifications are met. Deliverables must be packaged and labeled according to Section C standards and shipped under FOB Origin terms. The performance of this contract is centered at Robins Air Force Base, with the work falling under NAICS code 332410. The procurement process includes a response deadline of September 30, 2026, to support prime contractors delivering essential aviation supply components.

AVIATION SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

COOLER, FLUID, INDUSTRIA

Solicitation # SPE8E8-26-T-5712

This contract, identified as SPE8E8-26-T-5712, is a solicitation by the Defense Logistics Agency for the procurement of one industrial fluid cooler with antifreeze, identified by NSN 4420014112447. The requirement specifies adherence to technical data packages and drawings, specifically referencing part number 6096846-009. The delivery is required within five days after receipt of order, with a required delivery date of September 23, 2026. The shipment is destined for the US Naval Base Sasebo in Japan, with FOB Origin terms and inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. The contract also incorporates standard DLA quality and technical requirements, including guidelines for the removal of government identification from non-accepted supplies and documentation for source approval requests.

Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

BONNET, FLUID COOLER

Solicitation # SPE7M1-26-T-042X

Solicitation SPE7M1-26-T-042X is issued by the DLA Land and Maritime, Maritime Supply Chain, for the procurement of two fluid cooler bonnets, identified by NSN 4420-01-307-8883. The requirement falls under NAICS code 332410 and specifies a delivery period of 168 days after order, with a need ship date of November 3, 2026, and a final required delivery date of January 3, 2027. Delivery is to be made to DLA Distribution San Joaquin in Tracy, California, with inspection and acceptance occurring at the destination per FAR 52.246-2. The contract mandates strict adherence to DLA packaging requirements (RP001) and marking standards under MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, and the procurement incorporates specific restrictions regarding the use of mercury and the Buy American Act. Contractors must utilize the Wide Area Workflow (WAWF) system for electronic invoicing and receiving reports. Additionally, the solicitation requires compliance with NIST SP 800-171 for safeguarding covered defense information and mandates that all quotes be submitted via the DIBBS portal.

MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Boiler Tuning Services - Chalmers P. Wylie VA Ambulatory Care Center - Small Business Set-Aside

Solicitation # 36C25026Q0334

The Department of Veterans Affairs is seeking a small business contractor to provide semi-annual preventative maintenance, troubleshooting, and tuning services for three 250 hp Williams Davis gas-fired boilers at the Chalmers P. Wylie VA Ambulatory Care Center in Columbus, Ohio. The scope of work includes tuning for both natural gas and #2 fuel oil, performing diagnostic troubleshooting via the Preferred Controls programming app, and providing updates to the boiler control system and Supervisory Control and Data Acquisition (SCADA). The contract is a firm fixed price award consisting of a base year starting September 30, 2026, with four subsequent option years. This is a 100% Small Business Set-Aside. Award decisions will be based on a comparative evaluation where technical capabilities and past performance are deemed more important than price. Required qualifications include a 3rd Class Boiler Engineer license and authorization as a Preferred Utilities technician. The contractor must adhere to VHA Directive 1810, ASME Boiler and Pressure Vessel Codes, and specific VA Engineering SOPs. Additionally, the contractor is required to submit a written Quality Control Plan within 14 days of award and comply with Privacy Act requirements due to the potential accessibility of confidential medical records.

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

Heat Exchangers Tube Bundle Replacements, IAD

Solicitation # IFB-26-25818

The Metropolitan Washington Airports Authority is seeking a contractor for solicitation IFB-26-25818 to provide replacement tube bundles and gasket sets for heat exchangers at Washington Dulles International Airport. The required parts must be compatible with existing Taco HTF Series heat exchangers and current field conditions, and the selected contractor is required to provide all necessary manufacturer and supplier technical documentation. This solicitation was posted on September 22, 2026, with a response deadline of October 15, 2026. The project falls under NAICS code 332410 and is managed by the agency organization in Virginia. Interested parties can find further details through the official MWAA business opportunities portal.

Metropolitan Washington Airports Authority

POSTED

DEADLINE

Supply of NICUAL Alloy Raw MaterialThis subcontract opportunity, issued by the Department of Defense Maritime Supply Chain, seeks a Women-Owned Small Business to supply raw NICUAL alloy stock in the form of bars, tubes, or billets. The materials must meet the specific chemical and physical properties required for NSN 4320004632507, and the provider is required to furnish Material Test Reports and Certificates of Conformance to verify alloy purity. The solicitation is categorized under NAICS code 332410 and was posted on September 21, 2026. Interested parties must submit their responses by the deadline of October 6, 2026. This contract is specifically designated as a set-aside for Women-Owned Small Businesses.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Industrial Fluid Coolers (NSN 4420013761114)This subcontract involves the procurement and delivery of three industrial fluid coolers that must comply with NSN 4420013761114 specifications. The contract is a Total Small Business Set-Aside under NAICS code 332410, managed by the Department of Defense in San Diego. All shipping and handling must adhere to RP001 DLA Packaging Requirements for Procurement, with delivery terms set as FOB Origin. The performance location for this requirement is San Diego, ZIP code 92136-3581. Interested parties must respond by October 2, 2026, to provide the completed units to the designated location.

POSTED

DEADLINE

COOLER, FLUID, INDUSTRIA

Solicitation # SPE8E8-26-T-5706

Solicitation SPE8E8-26-T-5706 is a total small business set-aside issued by DLA Troop Support Construction and Equipment for the procurement of three industrial fluid coolers, identified by NSN 4420013761114. The requirement specifies critical application items with associated part numbers from Tranter PHE Inc. Delivery is required by June 5, 2027, with a need ship date of February 1, 2027, and a delivery timeframe of 121 days after receipt of order. The items are to be delivered FOB Origin to DLA Distribution San Diego. Technical and quality requirements are governed by the DLA Master List, and the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds. Packaging must adhere to RP001 and MIL-STD-129, requiring suitable wood boxes with all openings plugged or sealed to prevent internal contamination. Inspection and acceptance will occur at the destination. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and payment processing is required through the Wide Area WorkFlow (WAWF) system. The procurement is subject to the Buy American Act and Berry Amendment domestic sourcing restrictions.

POSTED

DEADLINE

Copper Alloy 675 Metal Bar SupplyThis subcontract involves the supply of Copper Alloy 675 metal bars to support prime contractors fulfilling DLA Troop Support Construction and Equipment contracts. The requirement specifies six hot rolled, half hard, round bars, each measuring 6.000 inches in diameter and 5.000 feet in length. All items must adhere to RP001 packaging and MIL-STD-129 marking standards. The materials are to be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. This procurement falls under NAICS code 332410 and is managed by the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

in about 1 hour

Boiler Control Systems & PLC IntegratorThis subcontract opportunity with the Department of Homeland Security involves the replacement of obsolete boiler PLCs and burner sequencing controls for prime contractors working on USCG USCGC HEALY SLEP projects. The selected integrator will be responsible for designing and installing PLC-based controls, programming burner sequencing, and conducting initial light-off and burner adjustments. All work must be performed using a combustion analyzer in strict accordance with MIL-STD-1399-300-1 and USCG Tech Pub S9517-AY-MMC-010 to ensure a fully operational control system. The project is based in Seattle, Washington, under NAICS code 332410. Managed by Sflc Procurement Branch 2, the contract requires the delivery of a functional boiler PLC and burner sequencing control system. Interested parties must submit their responses by the deadline of October 6, 2027.

Sflc Procurement Branch 2(00085)

POSTED

DEADLINE

in about 1 year

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Supply of Structural Aircraft Plates (NSN 1560-01-733-8598)This subcontract with the Department of Defense involves the supply of four structural aircraft plates meeting the technical specifications for NSN 1560-01-733-8598. The provider is responsible for manufacturing or sourcing these plates using aerospace-grade materials and precision machining to support prime contractors on DLA supply contracts. A critical requirement of the agreement is the maintenance and delivery of a comprehensive supply chain traceability documentation package in accordance with requirement RQ018. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Manufacturing of Attitude Indicator Caging ShaftsThis subcontract involves the manufacture and supply of three precision-machined attitude indicator caging shafts for the Department of Defense, specifically the ASC Supplier Oper AE and AF Division. The shafts must be fabricated according to NSN 6610-00-530-3543 specifications using CNC machining to meet strict aerospace tolerances. Performance will take place at Hill AFB, and the contractor is required to provide Source Approval Request documentation per RC001. Compliance with DLA Master List RA001 and RP001 packaging requirements is mandatory for all deliveries. The contract falls under NAICS code 336413 and requires the delivery of completed, fully documented components. The response deadline for this solicitation is September 30, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Pressure Transmitters (NSN 6685123750988)This subcontract, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, involves the supply of seven pressure transmitters identified by part number X00E50200509 and NSN 6685123750988. These components, produced by Rolls-Royce Solutions America Inc and MTU Friedrichshafen GmbH, are designated as Critical Application Items. The contract requires strict adherence to MIL-STD-129 for marking and RP001 for palletization. The opportunity is a Total Small Business Set-Aside under NAICS code 334516, with performance located in San Diego, California. The solicitation was posted on September 22, 2026, with a response deadline of September 30, 2026.

Analytical Laboratory Instrument Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supplier of Nonmetallic Electrical Conduit Assembly (NSN 5975-01-422-5743)This subcontract involves the manufacture or sourcing of one Nonmetallic Electrical Conduit Assembly, identified by NSN 5975-01-422-5743, for prime contractors supporting DLA Aviation supply contracts. The selected supplier is responsible for the production and delivery of the unit, ensuring all marking, labeling, and palletization strictly adhere to MIL-STD-129 and RP001 DLA Packaging Requirements. The opportunity is issued by the Department of Defense under the ASC Supplier OE and AF Division, with the place of performance located at Robins AFB. Interested parties must respond by September 30, 2026, for this requirement categorized under NAICS code 335999.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

Aircraft Exhaust Duct ManufacturingThis subcontract involves the fabrication and delivery of one Aircraft Gas Turbine Engine Exhaust Duct for prime contractors supporting Department of Defense DLA supply contracts. The manufacturing process must adhere to NSN 2840-01-455-3677 and the DLA Master List of Technical and Quality Requirements, utilizing aerospace-grade heat-resistant alloys and precision metal forming and welding equipment. All materials must comply with FAR 52.211-5 requirements. The project is managed under NAICS code 336412 by the ASC Supplier OE and AF Division. Performance of the contract will take place in Tracy, California. The solicitation was posted on September 22, 2026, with a response deadline of September 30, 2026.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

Kit Assembly and Specialized PackagingThis subcontract for the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, involves the kitting, assembly, and military-grade packaging of Fastener Tool Kits for prime contractors. The scope of work includes organizing fasteners into specific kit configurations, packaging according to ASTM D3951, palletizing per RP001, and ensuring all marking and labeling adhere to MIL-STD-129 standards using industrial equipment. The project is categorized under NAICS code 339999 and will be performed in New Cumberland, Pennsylvania. The solicitation was posted on September 22, 2026, with a response deadline of September 30, 2026. The final deliverable consists of fully assembled, marked, and palletized kits ready for deployment.

All Other Miscellaneous Manufacturing

POSTED

about 23 hours ago

DEADLINE

Fastener Component SupplyThis subcontract for Fastener Component Supply supports prime contractors on ASC Supplier Oper AE and AF Div projects within the Department of Defense. The scope involves the manufacture and delivery of bulk quantities of individual fasteners, bolts, nuts, and specialized hardware, produced via precision machining, forging, or casting to meet specific military or commercial standards. All components must adhere to quality control requirements as defined by MIL-STD-1916. The project is categorized under NAICS code 332216 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by September 30, 2026, following the posting date of September 22, 2026.

Saw Blade and Handtool Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supplier of Nonmetallic Flexible Conduit (NSN 5975016170683)This subcontract involves the supply of three units of nonmetallic flexible conduit, specifically part number BC261-24-100 or approved equivalents meeting NSN 5975016170683 specifications. The contract is managed by the ASC Supplier Oper AE and AF Div under the Department of Defense, with a response deadline of September 30, 2026. The supplier must adhere to strict military standards for packaging, marking, and quality control, specifically MIL-STD-2073-1E, RP001, MIL-STD-129, and MIL-STD-1916 or MIL-STD-105/AQZ1.4. Delivery is required FOB Origin to the DLA Distribution DDSP in New Cumberland, Pennsylvania.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

Manufacture and Supply of Special Shaped SpacersThis subcontract involves the manufacture and supply of 16 special shaped spacers under NSN 5365-01-658-9678 for the Department of Defense, specifically the ASC Supplier Oper AE and AF Div. The fabrication must adhere to TDP Rev A Gen 1 and Drawing NR 19207 12580893, utilizing precision machining equipment. Quality control and delivery requirements include sampling per MIL-STD-1916 or ASQ H1331, marking according to RQ017, and packaging in compliance with ASTM D3951 and MIL-STD-129. The contractor must ensure full compliance with DFARS 252.225-7001 and deliver the finished units to Tracy, California. This opportunity falls under NAICS code 332710 and was posted on September 22, 2026, with a response deadline of September 30, 2026.

POSTED

about 23 hours ago

DEADLINE

Manufacturing of Structural Aircraft Panels (NSN 1560-01-152-1476)This subcontract involves the manufacturing of structural aircraft panels under NSN 1560-01-152-1476 for the Department of Defense, specifically the ASC Supplier Oper AE and AF Div. The contractor is responsible for fabricating nine finished panels in accordance with TDP Rev A Gen 3 and Reference Drawing 81205 25-2779, Rev F, with performance taking place at Tinker AFB. The project requires the completion of a Government First Article Test per FAR 52.209-4 and the delivery of all associated FAT documentation. Strict cybersecurity and compliance standards are mandated, including CMMC Level 2 certification via C3PAO, as well as adherence to DFARS 252.204-7012 and NIST SP 800-171.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supplier of Electrical Insulation Sheets (NSN 5970-01-697-0387)This subcontract involves the supply of electrical insulation sheets, specifically NSN 5970-01-697-0387 and Essex Brownell Inc. part number NX-410-005, to prime contractors supporting DLA Aviation supply contracts. The work is performed for the Department of Defense under the ASC Supplier OE and AF Division, with the place of performance located at Hill AFB. All deliverables must be completed by March 2027. The supplier must adhere to strict quality and safety standards, including sampling per MIL-STD-1916 or ASO H1331 and marking according to RQ017. Hazardous materials must be accompanied by MSDS and hazard labels in compliance with 29 CFR 1910.1200. Additionally, the contract explicitly prohibits the use of additive manufacturing processes for these components.

Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

Specialized Coating and PlatingThis subcontract with the Department of Defense, specifically for ASC Supplier Oper AE and AF Div, involves the application of protective coatings and surface treatments to ground rods. The work requires the use of chemical treatment facilities and plating tanks to deliver finished, coated products. A critical requirement of the performance is strict adherence to DFARS 252.223-7008, which prohibits the use of Hexavalent Chromium. The project is categorized under NAICS code 332813 and will be performed in Cherry Point. The solicitation was posted on September 22, 2026, with a response deadline of September 30, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 23 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS