Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturer of Aircraft Gas Turbine Engine Metallic Seals

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture of high-precision metallic seals for prime contractors supporting DLA Weapons Support SMSG Aviation Supply Chain projects. The scope of work specifically requires the fabrication of seven finished sleeve-sealing no 4 1/2 bearing pressure tubes according to NSN 2840011611084 and Critical Application Item standards. Due to the nature of the components, precision machining for aerospace tolerances is mandatory. The selected provider must maintain quality systems compliant with SAE AS9003 or ISO 9001. The project is associated with NAICS code 336412 and is managed under the Department of Defense. Performance for this contract is designated to take place at Tinker AFB.

General Info

Manufacture seven high-precision bearing pressure tubes for DLA at Tinker AFB.

Agency

Department Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4AX-27-T-0012.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEAL, METALLIC, AIRCRAFT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures high-precision metallic seals for prime contractors on DLA Weapons Support SMSG Aviation Supply Chain projects. Fabricates sleeve-sealing no 4 1/2 bearing pressure tubes per NSN 2840011611084 and Critical Application Item standards. Requires precision machining for aerospace tolerances and quality systems compliant with SAE AS9003 or ISO 9001. Delivers seven finished metallic seals.

Similar Contracts

Same NAICS industry code

Manufacturing of Combustion Chamber Plates (NSN 2840-01-159-6767)This subcontract involves the manufacture and supply of 540 precision-engineered combustion chamber plates, identified as NSN 2840-01-159-6767, for prime contractors supporting the Department of Defense DLA Weapons Support SMSG Aviation Supply Chain. The work requires precision machining and forming to aerospace tolerances using CNC equipment, with performance taking place at Tinker AFB. The contractor must maintain strict adherence to quality standards, specifically SAE AS9003 or ISO 9001, and utilize MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the provider must ensure full compliance with the Buy American Act and meet CMMC Level 2 cybersecurity requirements.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 4 hours ago

DEADLINE

Lubricating Nozzle ManufacturerThis subcontract involves the manufacture of lubricating nozzles for prime contractors supporting DLA Aviation projects, specifically for NSN 2840-01-256-2029. The selected manufacturer is responsible for fabricating nozzles to strict military specifications, executing First Article Tests as outlined in CLIN 0002, and performing bare item marking according to RQ017. Due to the nature of the components, the contractor must utilize precision machining equipment and maintain full CSI compliance for Critical Safety Items. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Div, with performance taking place at Tinker AFB. The final deliverables include the finished lubricating nozzles and the required FAT certification. Interested parties must adhere to the response deadline of November 10, 2026, as specified in the solicitation.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Supply of Fluid Filter Bodies (NSN 2945-01-30-55341)This subcontract involves the manufacture or sourcing of four fluid filter bodies under NSN 2945-01-30-55341 to support prime contractors delivering DLA supply contracts for the Air Force. The work is performed for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Tinker AFB. Strict adherence to quality and regulatory standards is required, including SAE AS9100 quality requirements, MIL-STD-1916 sampling, MIL-STD-129 marking, and MIL-STD-2073-1E packaging. Because these are designated as Air Force Critical Safety Items, the provider must possess a valid CAGE code and maintain ITAR/EAR authorization. The response deadline for this opportunity is November 10, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Supply of Oil Pans (NSN 2520-01-585-0915)This subcontract involves the supply of three automotive engine oil pans identified by NSN 2520-01-585-0915 for prime contractors supporting the DLA Weapons Support Land Supply Chain under the Department of Defense. The selected provider is responsible for manufacturing or sourcing the parts to ensure they strictly adhere to the technical requirements outlined in DLA Master List RA001. Compliance with rigorous military standards is mandatory for the fulfillment of this contract. All units must be packaged and marked according to MIL-STD-129, MIL-STD-2073-1E, and RP001 standards, utilizing specifically designated cushioning and wrap materials. The opportunity was posted on November 2, 2026, with a response deadline of November 13, 2026, falling under NAICS code 336412.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

6th Stage Compressor Blade Set FabricationThis subcontract, titled 6th Stage Compressor Blade Set Fabrication, involves the manufacture of turbine and compressor blade sets for prime contractors supporting Department of Defense DLA supply contracts for aircraft gas turbines. The scope of work requires the use of high-temperature superalloys and precision CNC milling and grinding equipment to perform casting, forging, and precision machining. All production must strictly adhere to SAE AS9100 quality standards and Army Critical Safety Item protocols to ensure the integrity of the completed 6th Stage Compressor Blade Sets. The project is managed by the DLA Weapons Support ASC Supplier Order OEM Division and is categorized under NAICS code 336412. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 10, 2026, following the posting date of November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Manufacturing of Metallic Particle Detectors (Air Force Critical Safety Item)This subcontract involves the manufacture of 54 Metallic Particle Detectors, specifically Metal Chip Oil Sump Detectors, for prime contractors supporting DLA Weapons Support SMSG Aviation Supply Chain projects. The scope of work requires precision machining and assembly conducted under strict Critical Safety Item protocols to ensure the highest standards of aviation safety. Performance will take place at Tinker AFB. To qualify, the contractor must maintain an SAE AS9100 quality management system and provide a CMMC Level 2 self-assessment. The contract explicitly prohibits the use of additive manufacturing in the production process. The final deliverable consists of 54 completed and properly marked detectors delivered to the Department of Defense.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 4 hours ago

DEADLINE

Precision Machining of Hydraulic Pump Seal HousingsThis subcontract involves the precision machining of 65 finished and inspected Critical Safety Item Pump Seal Housings for the Department of Defense, specifically supporting DLA Aviation supply contracts. The project requires the use of CNC milling, turning, and grinding to produce NSN 2840-00-784-4694 per RTX P/N 403386, with a strict prohibition on the use of additive manufacturing. Performance will take place at Tinker AFB. To be eligible, contractors must maintain an SAE AS9100 quality system and hold both CMMC Level 2 and JCP certifications to handle ITAR data. The solicitation was posted on November 2, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 4 hours ago

DEADLINE

FILTER BODY, FLUID

Solicitation # SPE4A7-27-T-2607

Solicitation SPE4A7-27-T-2607 is a request from the Defense Logistics Agency (DLA) for the procurement of four fluid filter bodies (NSN 2945-01-305-5341). This is designated as an Air Force Critical Safety Item, requiring the manufacturer's quality management system to comply with SAE AS9100 or an equivalent standard. The items are to be delivered FOB Origin to Tinker AFB by March 17, 2027, with a delivery window of 126 days. Quotations are due by November 10, 2026, and should be submitted via DIBBS. Eligibility for award requires offerors to maintain an approved US/Canada Joint Certification Program certification to access export-controlled data, as the items are subject to ITAR or EAR regulations. Compliance with the Buy American Act and the Berry Amendment is mandatory, and any use of non-domestic materials must be disclosed. Additionally, the use of additive manufacturing is prohibited unless specifically authorized. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

LOCK, TURBINE ROTOR BLA

Solicitation # SPE4AX-27-T-0015

Solicitation SPE4AX-27-T-0015 is a request for quotations issued by the DLA Weapons Support SMSG Aviation Supply Chain for the procurement of 3,952 units of turbine rotor blade locks for aircraft gas turbines. The items are identified as critical application items under NSN 2840007659926 and RTX Corporation part number 390380. Delivery is required within 256 days after order, with an original required delivery date of November 6, 2026. The supplies are to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to quality and technical standards, incorporating DLA Master List requirements RA001, RP001, RQ001, RQ011, and RQ017. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the destination. Notably, the government will not evaluate or award contracts to offers utilizing additive manufacturing processes. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 4 hours ago

DEADLINE

COVER ASSEMBLY, ANTI

Solicitation # SPE4A7-27-T-2618

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

SHIELD, HEAT, AIRCRAFT G

Solicitation # SPE4AX-27-T-0007

This procurement, issued by DLA Weapons Support, is a Request for Quotations for four units of a heat shield for an aircraft gas turbine engine, specifically the No. 4 bearing breather tube (NSN 2840-00-690-2099). The items are designated as critical application items and must be manufactured according to RTX Corporation part number 481080. Due to the nature of the component, casting or forging may be required, and contractors are advised that the government may not possess the necessary special tooling. The original required delivery date is November 6, 2026, with a delivery timeframe of 256 days after the order is received. Delivery is set as FOB Origin, with the final destination being the DLA Distribution Depot at Tinker AFB, Oklahoma. The contract mandates strict quality and security compliance, including a CMMC Level 2 Self-Assessment and adherence to SAE AS9003 or ISO 9001 standards. Inspection and acceptance will occur at the origin, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while item unique identification is not required. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The solicitation is governed by various FAR and DFARS clauses, including the Buy American Act and specific deviations regarding equal opportunity and human trafficking.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 4 hours ago

DEADLINE

SEAL, METALLIC, AIRCRAFT

Solicitation # SPE4AX-27-T-0012

Solicitation SPE4AX-27-T-0012 is a request for the procurement of seven metallic seals for aircraft gas turbine engines, specifically the sleeve-sealing no 4 1/2 bearing pressure tube, under NSN 2840011611084. The contract is managed by DLA Weapons Support and requires delivery to the DLA Distribution Depot at Tinker AFB, Oklahoma, with a required delivery date of November 6, 2026, and a delivery timeline of 256 days after receipt of order. The terms are FOB Origin, and the item is designated as a critical application item. Compliance requirements are extensive, including CMMC Level 2 self-assessment, adherence to the Buy American and Balance of Payments Program, and strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. Quality assurance is rigorous, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001, with inspection and acceptance occurring at the origin. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized packaging and marking for prime contractors supporting DLA aviation supply contracts. The scope of work requires the packaging of items according to ASTM D3951 and marking in compliance with MIL-STD-129. Additionally, the provider must implement DLA Master List requirements RP001 and RQ017 to ensure proper physical identification and bare item marking. The specific deliverable for this contract consists of 29 units of tube assemblies, which must be packed and labeled for shipment to the DLA Distribution Depot Oklahoma. Performance will take place at Tinker AFB, and the project falls under NAICS code 561910 for the Department of Defense.

Packaging and Labeling Services

POSTED

about 4 hours ago

DEADLINE

Precision Manufacturing of Metal Tube AssembliesThis subcontract involves the precision manufacturing of 29 metal tube assemblies for the Department of Defense, specifically supporting DLA aviation supply contracts. The fabrication must strictly follow TDP Rev A Gen 1 and RTX Corporation part numbers 458123 and 646787, while adhering to Reference QAP 77445 MQR-PSD-1. A zero non-conformance policy is in effect, and the use of additive manufacturing is strictly prohibited for these components. The contractor is required to maintain CMMC Level 2 and NIST SP 800-171 compliance to ensure data security. Performance will take place at Tinker AFB, with the final deliverable consisting of 29 completed and inspected aviation tube assemblies. The solicitation was posted on November 2, 2026, with a response deadline of November 9, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply of Aviation-Grade Raw Material for Angle BracketsThis subcontract involves the supply of certified aviation-grade raw metal stock for the production of angle brackets under the DLA Weapons Support SMSG Aviation Supply Chain. The provider is responsible for sourcing alloys that strictly adhere to Government Design Control Activity specifications and ensuring all materials are delivered directly to the fabricator. To maintain regulatory compliance, the supplier must provide Material Test Reports and Certificates of Conformance in accordance with DFARS Buy American Act requirements. The project is managed by the Department of Defense with the place of performance located at Tinker AFB.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 4 hours ago

DEADLINE

Precision Fabrication of Angle Brackets (NSN 5340-00-810-7046)This subcontract involves the precision fabrication of 134 angle brackets under NSN 5340-00-810-7046 for the Department of Defense, specifically supporting DLA Weapons Support SMSG Aviation Supply Chain projects. The manufacturer must adhere strictly to Government Design Control Activity specifications and ensure all units are marked, labeled, and packaged in accordance with MIL-STD-129 and ASTM D3951 standards. Performance of this contract requires the provider to hold JCP certification and maintain ITAR/EAR approval. The final deliverable consists of 134 finished and packaged brackets to be associated with operations at Tinker AFB. Interested parties must respond by November 9, 2026.

POSTED

about 4 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for critical aircraft engine components supporting DLA Weapons Support projects. The contractor is responsible for ensuring all items are processed in strict accordance with MIL-STD-2073-1E and MIL-STD-129, specifically adhering to preservation method 10 and cleaning and drying requirement 1. The use of MIL-SPEC packaging materials and specialized marking equipment is mandatory to meet these standards. The final deliverables consist of packaged and marked components prepared for FOB Origin shipment to Tinker AFB. This requirement is managed under NAICS code 561910 for the Department of Defense, specifically the DLA Weapons Support SMSG Aviation Supply Chain organization.

Packaging and Labeling Services

POSTED

about 4 hours ago

DEADLINE

Aerospace Component Precision MachiningThis subcontract for Aerospace Component Precision Machining involves the final machining, drilling, and finishing of No. 4 bearing breather tube shields for DLA Weapons Support. The selected contractor must execute precision machining according to RTX Corporation part number 481080, ensuring physical identification and bare item marking comply with RQ017. Final inspections must be conducted in accordance with MIL-STD-1916 or ASQ H1331 to deliver fully finished and inspected heat shields. The project requires the use of CNC milling and turning centers and mandates that the provider holds SAE AS9003 or ISO 9001 certification along with a CMMC Level 2 Self-Assessment. Performance will take place at Tinker AFB. Interested parties must respond by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 332710.

POSTED

about 4 hours ago

DEADLINE

Aircraft Engine Heat Shield Casting/ForgingThis subcontract involves the casting or forging of metal heat shield blanks for the No. 4 bearing breather tube, supporting DLA Weapons Support projects. The contractor must produce these critical application items in accordance with RTX Corporation part number 481080 specifications. Due to the technical nature of the work, the provider is required to possess specialized tooling and high-temperature alloy casting or forging equipment. Compliance requirements include mandatory SAE AS9003 or ISO 9001 certification and a CMMC Level 2 Self-Assessment. The project is managed under the Department of Defense through the DLA Weapons Support SMSG Aviation Supply Chain organization, with the place of performance located at Tinker AFB. Interested parties must adhere to the response deadline of November 9, 2026.

Rolled Steel Shape Manufacturing

POSTED

about 4 hours ago

DEADLINE

Aerospace-Grade Raw Material Supply (Berry Amendment Compliant)This subcontract involves the supply of aerospace-grade raw alloys or bar stock to prime contractors supporting DLA Weapons Support SMSG Aviation Supply Chain projects. The provider must deliver certified materials that strictly adhere to the chemical and physical properties outlined in TDP Rev A Gen 1. To ensure quality and regulatory adherence, the contract requires full material traceability, the provision of Mill Test Reports, and strict compliance with the Berry Amendment and the Buy American Act. The project is managed under the Department of Defense for the DLA Weapons Support SMSG Aviation Supply Chain Corporate LTC, with the place of performance located at Tinker AFB. Interested parties must respond by November 9, 2026, regarding this requirement categorized under NAICS code 336413. The primary objective is the reliable delivery of certified raw material stock directly to the manufacturer.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

Precision Machining/Manufacturing of Bearing Retaining Nuts (CSI)This subcontract involves the precision machining and manufacturing of three high-precision bearing retaining nuts, identified by NSN 5310-00-771-1489, for the Department of Defense under the DLA Weapons Support SMSG Aviation Supply Chain. The project requires strict adherence to Technical Data TDP Rev A Gen 1 and Air Force Critical Safety Item standards, with performance taking place at Tinker AFB. To qualify, the manufacturer must possess SAE AS9100 quality management certification and hold a Joint Certification Program certification to handle export-controlled data. The contract is categorized under NAICS code 332710 and requires specialized CNC machining capabilities to meet the rigorous safety and technical specifications of the aviation supply chain.

POSTED

about 4 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense, specifically the DLA Weapons Support aviation supply chain. The contractor is responsible for providing specialized packaging and marking for prime contractors, ensuring all components are processed according to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards. Key tasks include applying lot and serial numbers and CAGE codes using industrial marking equipment and anti-corrosion materials to deliver shipment-ready goods. The project requires strict adherence to DFARS 252.223-7001 compliance and will be performed at Tinker AFB. This opportunity falls under NAICS code 488410, with a response deadline of November 9, 2026.

Motor Vehicle Towing

POSTED

about 4 hours ago

DEADLINE

Manufacturing of Spur Gears (Critical Safety Item)This subcontract involves the manufacture and delivery of 16 spur gears to support DLA Weapons Support aviation supply chain projects. The components must be produced to match RTX Corporation part number 820462, adhering strictly to TDP Rev A Gen 1, QAP 13873 QAP-E09 Rev A, and QAP 77445 MQR-PSD-1 Rev 2. Due to the technical nature of the project, the contractor is required to utilize precision gear cutting and grinding equipment. As these components are designated as Critical Safety Items, the provider must hold CSI certification and submit a CMMC Level 2 self-assessment. The work is associated with the Department of Defense and is designated for performance at Tinker AFB. Interested parties must respond by November 9, 2026.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 4 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

BLADE SET, TURBINE, AIRC

Solicitation # SPE4A5-27-T-2154

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

PLATE, COMBUSTION CHAMB

Solicitation # SPE4AX-27-T-0010

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-7981

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

HOUSING, SEAL, PUMP H

Solicitation # SPE4AX-27-T-0011

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 4 hours ago

DEADLINE

NOZZLE, LUBRICATING,

Solicitation # SPE4A7-27-T-2596

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS