Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Manufacturer of Involuntary Straps (NSN 8465014706251)

Active

Federal

Response Deadline09/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of finished involuntary straps under NSN 8465014706251 for prime contractors supporting DLA Troop Support supply contracts. The selected provider must fabricate straps that adhere to the specific dimensions and material requirements outlined in the NSN and the DLA Master List of Technical and Quality Requirements, utilizing textile manufacturing equipment and performing quality assurance inspections according to military standards. The opportunity is managed by C and T Supply Chain for the Department of Defense under NAICS code 315990. The place of performance is designated as FPO 09583, with a response deadline of September 14, 2026.

General Info

Subcontract for manufacturing finished involuntary straps for DLA Troop Support by September 2026.

Agency

Department Of Defense → C AND T SUPPLY CHAINView Agency

NAICS

315990 - Apparel Accessories and Other Apparel ManufacturingView NAICS

Place of Performance

FPO, AE, 09583, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE1C1-26-T-1693.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STRAP, INVOLUNTARY, R

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 3

subcontract

Response DeadlineSep 14

Submission deadline

Response Deadline

09/14/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → C AND T SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → C AND T SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies finished STRAP, INVOLUNTARY, R for prime contractors delivering DLA Troop Support supply contracts. Fabricates straps meeting dimensions and material requirements of NSN 8465014706251 and the DLA Master List of Technical and Quality Requirements. Utilizes textile manufacturing equipment and performs quality assurance inspections to military standards. Delivers the finished NSN 8465014706251 straps.

Similar Contracts

Same NAICS industry code

T-shirts and Hats

Solicitation # 27703

The Chickasaw Nation is soliciting bids for the procurement of apparel, specifically requesting 3,000 Richardson Trucker Snapback Caps and a variety of Tultex Unisex Fine Jersey T-shirts. The T-shirt order includes 1,500 adult shirts in Light Slate and 1,500 youth shirts in Heather Light Sage, with both sets following a size distribution of 200 small, 200 medium, 400 large, 400 XL, and 300 2XL. All shirts must feature a one-color white logo on the full front. This solicitation, identified as number 27703, was posted on September 4, 2026, with a response deadline of September 9, 2026. Interested parties should direct all quotes and inquiries to the point of contact, Janet Tahah, via email.

Chickasaw Nation

POSTED

DEADLINE

OTS-600 Dry Suits

Solicitation # FA452826Q0012

The Department of the Air Force, specifically the 5th Operations Support Squadron at Minot Air Force Base, North Dakota, is soliciting quotes for brand name OTS-600 Dry Suits, Style 601GBR005B, manufactured by Aerostar International, Inc. This combined synopsis and solicitation, identified as FA452826Q0012, is a 100 percent small business set-aside under NAICS code 315990 for Apparel Accessories and Other Apparel Manufacturing. The requirement is for approximately 60 anti-exposure suits, as justified by a sole source determination based on Air Force Technical Order requirements. The government will award the contract to the responsible quoter offering the best value, considering price, past performance, product quality, and conformance to the request. Quotes must be submitted by September 8, 2026, and must include the company name, CAGE/UEI, point of contact, email, discount terms, and estimated delivery time. All items are to be delivered F.O.B. Destination to Minot AFB. Recent amendments have updated specific regulatory clauses and provided clarifications regarding production and delivery lead times without extending the solicitation deadline.

POSTED

DEADLINE

Water Soluble Laundry Bag Supplier

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

USMC Magazine Pouch Fabrication

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Ammunition Bag Production (NSN 8465-01-706-1419)

C AND T SUPPLY CHAIN

POSTED

DEADLINE

POUCH, MAGAZINE

Solicitation # SPE1C1-26-R-0128

Solicitation SPE1C1-26-R-0128 is a full and open competition for the manufacture and delivery of 60,000 USMC Magazine Pouches, which are components of the Family of Improved Load Bearing Equipment (FILBE). The government intends to issue a single award via a firm-fixed price, fixed quantity contract to the responsible offeror providing the lowest price that is technically acceptable. Technical evaluation will focus on a Product Demonstration Model (PDM) to assess visual, dimensional, and fit requirements. All materials must be of domestic origin in compliance with DFARS requirements, and no alternate materials may be used except for color. The acquisition process includes a mandatory First Article Test (FAT) where two samples must be submitted within 60 days of the award for government examination. Following FAT approval, the initial delivery is expected within 60 days, with subsequent deliveries occurring at 30-day intervals. If a FAT waiver is granted, the initial production lead time is reduced to 60 days. Deliveries will be made to designated third-party logistics depots in Michigan, Georgia, and Texas. Interested businesses must be registered in SAM and should request to be added to the automatic notification list through the listed point of contact to receive updates.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

STRAP, INVOLUNTARY, R

Solicitation # SPE1C1-26-T-1693

This solicitation, numbered SPE1C1-26-T-1693, is issued by the Department of Defense C and T Supply Chain for the procurement of two bags of involuntary straps, identified by NSN 8465-01-470-6251 and part number 56198 from Armament Systems and Procedures Inc. The contract requires delivery within 20 days after receipt of the order, with a final required delivery date of September 8, 2026. The shipment is destined for the USS Washington (SSN 787) and must be transported via the fastest traceable means, specifically prohibiting the use of parcel post. The supplier must adhere to strict technical and quality requirements, including DLA packaging standards RP001, MIL-STD-129 for marking, and ASTM D 3951 for packaging. Inspection and acceptance will occur at the destination. The contract also specifies the removal of government identification from any non-accepted supplies and notes that covered defense information potentially applies to this acquisition.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE2DS-26-T-402G

This contract is for the procurement of water soluble laundry bags measuring 36 by 39 inches with tie closures for soiled linen. The requirement consists of 17 packages, with each package containing 100 bags. The items must be delivered FOB destination within 20 days and must adhere to specific medical marking standards and DLA packaging requirements. Suppliers must ensure that no mercury or mercury containing compounds are intentionally added to the hardware or supplies. All units must be packed in suitable commercial sealed containers to prevent damage during transit. The contract specifies that the bidder must provide the commercial and part numbers being supplied, with identified part numbers including those from Cardinal Health 200, LLC.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

INSIGNIA, SHOULDER S

Solicitation # SPE1C1-26-Q-0488

This contract is a firm fixed price solicitation for the procurement of 10 US Army shoulder sleeve insignia featuring the Luxembourg NATO nation flag. The patches must be subdued three-color flags measuring 2.25 by 3.5 inches with a velcro hook backing, specifically designed for identification of friendly forces when viewed through night vision goggles. Delivery is required within 90 days after order, with inspection and acceptance occurring at the destination in Kaiserslautern, Germany. The contractor must provide five first article samples for testing and notification of results within 30 calendar days. Compliance with DLA packaging requirements, ASTM D3951, and MIL-STD-129 labeling is mandatory. Additionally, the contract requires adherence to CMMC Level 2 self-assessment and the protection of covered defense information. All technical and quality requirements are governed by the DLA Master List.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

BAG, AMMUNITION

Solicitation # SPE1C1-26-T-1692

This contract is for the procurement of 13 ammunition bags, identified by NSN 8465017061419 and part number MGM9P2X1-BK from Resilience Tactical LLC. The order is issued under solicitation SPE1C1-26-T-1692 by the Department of Defense. Delivery is required within 20 days, with a final required delivery date of September 8, 2026. The items are to be delivered FOB Destination to the USS Washington (SSN 787). The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E for delivery preparation and MIL-STD-129 for marking. Shipments must be made via the fastest traceable means, and the use of parcel post is explicitly prohibited. Technical and quality requirements are governed by the DLA Master List, specifically incorporating standards RA001, RP001, RQ011, and RD003.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

JACKET, WELDER'S

Solicitation # SPE1C1-26-T-1696

This contract is for the procurement of fire-resistant welder's jackets made of high-quality boarhide leather, specifically the Caiman 30 inch model. The garments feature snap fasteners, are unlined, and include Kevlar stitching with reinforced stress points. The order consists of multiple line items for quantities of one unit each, with specific National Stock Numbers provided for large and x-large sizes. Delivery is required within 20 days, with shipping designated as FOB Destination to vessels including the USS Russell and USS McFaul. Packaging must comply with DLA requirements and MIL-STD-129, with a strict prohibition on the use of parcel post in favor of the fastest traceable means. The required delivery dates for these items are set for September 2026.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

FY26 TD 26352 Neck Gaiters

Solicitation # 15M10226QA4700385

Solicitation 15M10226QA4700385 is a total small business set-aside request for the procurement of 3,620 black Holloway sublimated neck gaiters for the U.S. Marshals Service Training Division. The items must be constructed from Dry-Excel material consisting of 84 percent polyester and 16 percent spandex, featuring 4-way stretch, flatlock stitching, and 50 plus UPF sun protection. Each gaiter requires a custom sublimated unique badge number in Arial Condensed white font and a centered USMS Badge Star. The award will be based on the Lowest Priced Technically Acceptable (LPTA) method, with a final delivery date of March 31, 2027, shipped FOB Destination to the USMS Training Academy in Glynnco, Georgia. Offerors must submit a two-volume proposal by September 8, 2026. Volume 1 must be on company letterhead and include the CAGE code, line-by-line pricing, and estimated delivery dates, while Volume 2 must include a signed SF-1449 with pricing and the completed USMS-0004 clause. Quotes must remain valid for 90 days. Technical substitutions are not permitted, although items are not name-brand specific; however, any alternative quotes must include full technical specifications for evaluation. All prospective offerors must be registered in the System for Award Management (SAM) and provide a Unique Entity Identifier (UEI) and Taxpayer Identification Number (TIN).

Department Of Justice US Marshal Service

POSTED

DEADLINE

More opportunities from Department Of Defense → C AND T SUPPLY CHAIN

Same awarding agency

Supplier of Technical Textile Webbing/FabricThis subcontract with C AND T SUPPLY CHAIN under the Department of Defense involves the sourcing and delivery of high-strength technical textile webbing and fabric. The supplier is responsible for providing raw materials that meet the DLA Master List technical specifications, ensuring all products are accompanied by material certifications and Certificates of Conformance to verify strength and durability standards. The contract falls under NAICS code 313110 and requires delivery of materials to the manufacturer, with the place of performance located at FPO 09583. The solicitation was posted on September 3, 2026, with a response deadline of September 14, 2026.

Fiber, Yarn, and Thread Mills

POSTED

DEADLINE

Supplier of Helmet Repair Kits (NSN 8470017293493)

Other Miscellaneous Durable Goods Merchant Wholesalers

POSTED

DEADLINE

Third-Party Material Testing and Certification

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Coyote 498 Plastic Hardware Components

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Berry Amendment Compliant Nylon Fabric and Thread Supply

POSTED

DEADLINE

Supply of Industrial Flame-Resistant Textiles and Leather

Textile and Fabric Finishing Mills

POSTED

DEADLINE

Manufacturing and Supply of Kevlar Welder's Jackets

Men’s and Boys’ Cut and Sew Apparel Manufacturing

POSTED

DEADLINE

Technical Textile Material Supply

Textile and Fabric Finishing Mills

POSTED

DEADLINE

MIL-SPEC Packaging and Palletization Services

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

Supply of Helmet Headband Clips (NSN 8470017293458)

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE