Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Manufacturing and Supply of Headless Straight Pins

Open
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacturing and supply of 455 headless straight pins for the DLA Weapons Support ASC Commodities Division, with delivery to Hill AFB. The contractor is responsible for sourcing or manufacturing pins according to P/N 568-1801-01 specifications, utilizing precision machining equipment and materials that comply with the Buy American Act and the Berry Amendment. The contract requires strict adherence to quality sampling standards per MIL-STD-1916 or ASQ H1331, packaging per MIL-STD-2073-1E, and shipment marking per MIL-STD-129. Additionally, the provider must comply with DFARS 252.204-7012. There is no specific set-aside status associated with this procurement.

General Info

Supply 455 headless straight pins to Hill AFB meeting specific military specifications.

NAICS

333248 - All Other Industrial Machinery Manufacturing

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-123S.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PIN, STRAIGHT, HEADLESS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Due in 7 days

Read the full solicitation package

This scope is part of a larger contract. Its documents live on the prime.

  • 1 document on the prime contractFrom PIN, STRAIGHT, HEADLESS
Read the prime's documents

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supplies headless straight pins for prime contractors delivering DLA supply contracts. Manufactures or sources pins to P/N 568-1801-01 specifications. Performs quality sampling per MIL-STD-1916 or ASQ H1331, packages per MIL-STD-2073-1E, and marks shipments per MIL-STD-129. Requires precision machining equipment and materials compliant with the Buy American Act and Berry Amendment. Complies with DFARS 252.204-7012. Delivers 455 EA pins to Hill AFB.

Similar Contracts

Same NAICS industry code

NAICS: 333248
New
Federal
Automated Fluidized Bed Mixer Facility Modernization for end use at Pine Bluff Arsenal – CSO
Solicitation # W519TC26ACSO
The U.S. Army Contracting Command - Rock Island is seeking qualified vendors to provide an automated, high-precision mixing, granulation, and drying system to modernize the colored smoke energetics production facility at Pine Bluff Arsenal. This effort is being conducted as a Commercial Solution Opportunity (CSO) under FAR Part 12 and DFARS 212.70, allowing for the procurement of innovative commercial items and services from both traditional and non-traditional defense contractors. The required system must feature a batch capacity of 800 to 1200 lbs, maintain a minimum batch-to-batch repeatability and operational availability of 95%, and ensure raw material weighing accuracy within ±1.5%. Critical safety requirements include compliance with Class II Div 1 F and G hazardous environment ratings and the implementation of a high-speed fire detection and suppression system with a response time of 500ms or faster. The acquisition process is structured in three phases: a Phase 1 Solution Brief, a Phase 2 Pitch, and a Phase 3 Full Quote. Evaluation criteria focus on technical merit, innovation, financial feasibility, and the potential impact on operational readiness and safety compliance. Successful candidates will be awarded a Firm-Fixed-Price contract based on the greatest overall value and innovative benefit to the arsenal. There is no set aside used for this solicitation. All submissions must be unclassified, provided in PDF, Word, or PowerPoint format, and must include a mandatory CAGE code for access to restricted drawings.
W6QK Acc-Ri

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 333248
New
Federal
Intent to Award Sole Source-SPARE PARTS
Solicitation # 2031ZA27N00008
The Bureau of Engraving and Printing (BEP) Office of the Chief Procurement Officer intends to award a sole-source, firm-fixed-price contract to Buhler Inc. for proprietary spare parts used on the Three-Mill SDVE 1300. The required components include a heat exchanger with fastening bracket (P/N UNS-46481-036), a pressure-reducing unit passage 1 (P/N SDVE-83048-810), and a left spur gear Z=98 (P/N SFL-20095-190). This procurement is conducted under NAICS code 333248 for All Other Industrial Machinery Manufacturing and is justified under FAR Subpart 6.302-1(a)(2)(ii), as Buhler Inc. is identified as the only responsible source capable of satisfying the agency's requirements. This opportunity is designated as a Small Business Set Aside - Total. The contract mandates strict adherence to BEP logistics and invoicing protocols. Deliveries are accepted at the Washington, D.C. Annex Building, the Landover Warehouse in Maryland, and the Western Currency Facility in Fort Worth, Texas, with specific scheduling and labeling requirements for each location. All payment requests must be submitted electronically via the Invoice Processing Platform (IPP). Interested parties must be active in the System for Award Management (SAM) and submit capability statements to the designated points of contact no later than 12:00 PM EDT on November 30, 2026.
Office Of The Chief Procurement Officer

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 333248
New
Federal
Resonant Acoustic Mixer (RAM) System Upgrade
Solicitation # N6893627R0004
The Naval Air Warfare Center Weapons Division (NAWCWD), China Lake, is seeking the acquisition of proprietary aftermarket equipment, hardware, and control systems for existing Resodyn LabRAM II, OmniRAM, and RAM 5 Resonant Acoustic Mixers. This effort is part of the DoN26 Capital Investment Program project for Continuous Acoustic Mixer Processing (CAMP), aimed at transitioning Continuous Acoustic Mixing from laboratory-scale to large-scale production of energetic materials. The scope of work includes the production, delivery, installation, testing, and training of Government personnel for various RAM system items, including mix vessels, control systems, vacuum and earth detection systems, and water heater/chiller units. The government intends to procure these requirements on a sole source basis from The Falcon Project, Ltd., in accordance with FAR 6.103-1. The contractor will be responsible for proper crating and packing for shipment to China Lake, CA, and must perform both pre-factory and on-site factory acceptance testing. Strict adherence to safety standards is required, including NAVSEA OP 5 and the China Lake Safety Manual, with specific requirements for hazardous area equipment to be crevice-free to prevent the accumulation of explosives. Additionally, a Cyber Maturity Model Certification (CMMC) Level 1 is anticipated, and all Controlled Unclassified Information (CUI) must be handled and encrypted according to DoDI 5200.48.
Naval Air Warfare Center

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 333248
New
Federal
Automated Digital Flatbed Cutting and Routing Equipment
Solicitation # FA487727QA028
The 355th Contracting Squadron is conducting market research to identify capable businesses for the procurement of two automated digital flatbed cutting and routing systems, specifically Colex Sharpcut Pro or equivalent. The requirement includes two distinct systems: System 1 must have a minimum active cutting area of 120 by 60 inches with automated board feeding and continuous-loading capability, and System 2 must have a minimum active cutting area of 80 by 124 inches. Both systems must feature motorized conveyor beds, vacuum hold-down, and capabilities for cutting, routing, creasing, and marking of rigid and flexible materials. Technical requirements include optical registration, table mapping, barcode-enabled job retrieval, and interoperable software and tooling to allow file transfers without material rework. The scope of work encompasses turnkey delivery F.O.B. Destination to Davis-Monthan AFB, Arizona, including installation, configuration, and three days of on-site operator training for each system. Vendors must provide at least one year of warranty for non-consumable parts and labor, along with one year of remote or telephone technical support. This effort is categorized under NAICS code 333248 and PSC 3610. There is no set aside used for this requirement. Interested businesses must submit a completed Vendor Capability Questionnaire and detailed product literature to the Contracting Officer by November 25, 2026, at 8:00 AM MST.
FA4877 355 Cons Pk

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 333248
New
International
Selective Laser Sintering (SLS) 3D Printing System
Solicitation # 26-58097-B
The National Research Council Canada (NRC) is soliciting offers for a new, unused, commercially available Selective Laser Sintering (SLS) 3D Printing System to support solvent-free production and prototyping of battery materials at the Clean Energy Innovation Research Centre. This open tendering process is subject to the Policy on Reciprocal Procurement, meaning only Canadian suppliers are eligible. The contract will be awarded to the responsive bidder who meets all mandatory technical criteria and offers the lowest price. All deliverables, including the hardware, software, and at least 2 kg of compatible powder, must be received by January 29, 2027, at the delivery location in Mississauga, Ontario, under DAP Incoterms 2020. The required system must be a laser-based, open-materials SLS system compatible with Industry 4.0 principles, featuring a built-in laser protective enclosure, a minimum build volume of 100 mm x 100 mm x 100 mm, and a printing speed of 10 mm/h or higher. Mandatory technical requirements include a minimum printable wall thickness of 0.5 mm or less on the XY plane and the ability to use powdered feedstock with a mean particle size D50 from 1 µm to 100 µm. The successful contractor must provide on-site installation, six hours of training, and ten hours of technical support over one year. Bidders must adhere to environmentally preferable packaging standards and provide all necessary safety data sheets for materials. Offers must be submitted by November 30, 2026, and include separate technical, financial, and certification documents.
National Research Council of Canada

POSTED

3 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Get AI-powered intelligence on this solicitation and the ones like it

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 900+ contractors already using CLEATUS