Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Manufacturing of Metal Marine Doors

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the fabrication of eight metal marine doors compliant with military specifications, emphasizing structural integrity, enhanced corrosion resistance, and superior sealing performance suitable for rigorous maritime conditions. All doors must meet exacting durability and environmental withstand criteria to ensure operational reliability in high-salinity, high-humidity, and salt-spray exposed settings. The work is classified as a subcontract under NAICS code 332322, indicating specialized metal fabrication for marine applications, and is being managed by the Fluid Handling Division of the Department of Defense. Performance is required at Tracy, California, with a ZIP code reference of 95304-5000, and all deliverables must be completed and submitted no later than August 14, 2026, following a solicitation posted on August 3, 2026. Compliance with all technical, material, and testing standards outlined in the military specifications is mandatory, and failure to meet these requirements will result in rejection of deliverables.

General Info

Fabricate eight military-grade marine doors for Tracy, CA, due August 14, 2026, with corrosion resistance and sealing compliance.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332322 - Sheet Metal Work ManufacturingView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabrication of 8 metal marine doors per military specifications, including structural integrity, corrosion resistance, and sealing performance for maritime environments.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7M3-26-T-7825

This contract pertains to the procurement of a titanium elbow, tube with NSN 4730013926589 and part number R81102T-4 manufactured by Eaton Aeroquip LLC, requiring engineering source approval due to its restricted source status. The item must be produced using casting or forging methods, and since the government may not possess the required tooling, suppliers must submit a Casting and Forging Assistance Request to DLA for support. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision determined by the solicitation or award date depending on acquisition type. The contract specifies a quantity of two units to be delivered within twenty days to Naval Air Station Lemoore, California, under FOB origin terms, with zero variance allowed in quantity and inspection occurring at the destination. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 guidelines, and no parcel post is permitted—shipment must occur via the fastest traceable means. The delivery is tied to a required delivery date of July 30, 2026, and the contract is issued under solicitation SPE7M3-26-T-7825, with point of contact William Cain available for inquiries.

FLUID HANDLING DIVISION

POSTED

about 11 hours ago

DEADLINE

STUD ASSEMBLY, TURNLOCK

Solicitation # SPE4A6-26-T-11RL

The contract is for the procurement of 126 units of a STUD ASSEMBLY, TURNLOCK FASTENER with NSN 5325-00-574-6645 under Purchase Request 7017740553. The solicitation number is SPE4A6-26-T-11RL, issued by the ASC COMMODITIES DIVISION under the Department of Defense, with a response deadline of August 12, 2026, and a required delivery timeline of 171 days after award. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless amended. Packaging must comply with DLA procurement standards, and all items must be physically marked in accordance with RQ017 requirements. Covered defense information may apply, and non-accepted supplies must have government identification removed. Documentation for source approval is required, and the place of performance is specified as New Cumberland, PA, 17070-5002. Primary point of contact is Marchello Fields, reachable at 804-279-0001 or marchello.fields@dla.mil.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

FRP Doors & Heavy Metal (HM) Doors SupplyThe contract involves the supply of corrosion-resistant fiberglass reinforced plastic (FRP) doors and heavy-duty metal doors designed for deployment in high-humidity and chemically aggressive wastewater treatment environments. These doors must withstand prolonged exposure to moisture, sulfides, and other corrosive elements typical in wastewater infrastructure, ensuring long-term durability, operational reliability, and minimal maintenance. The specification emphasizes materials and construction methods that resist degradation while maintaining structural integrity and secure sealing properties under demanding conditions. This is a subcontract opportunity targeted exclusively at small businesses, including categories such as Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, as defined by SBA guidelines. The NAICS code 332322 confirms the focus on metal door and frame manufacturing, and the solicitation is open for responses until August 17, 2026. The project is tied to infrastructure improvements at the Hagerstown Wastewater Treatment Plant, and all deliveries and performance are expected to support this specific federal-adjacent wastewater enhancement initiative.

Carl Belt, Inc.

POSTED

DEADLINE

Ballistic Vehicle Door/Hatch ManufacturingThe contract calls for the manufacture of 47 ballistic-rated vehicle doors or hatches using defense-grade metal fabrication techniques, encompassing tooling development, casting processes, and strict adherence to technical specifications designed for military applications. All work must meet stringent performance and safety standards to ensure protection against ballistic threats, with full compliance expected throughout production. The project falls under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the SBA, and is classified under NAICS code 332322 for forged and stamped metal product manufacturing. Performance of the contract is required at Tracy, California, with a response deadline of August 18, 2026, and the solicitation was posted on August 3, 2026. The contracting activity is managed by the Department of Defense under the organizational name LAND SUPPLIER OPNS VEHICLE SPT, indicating a procurement initiative focused on sustaining and enhancing vehicle protection systems. The subcontract nature suggests this work supports a larger defense contract, with the prime contractor or government entity ultimately responsible for integration into broader military vehicle platforms. All fabricated components must be traceable, certified, and delivered in full compliance with federal defense acquisition regulations.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Precision Metal Fabrication & Welding

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Precision Fabrication of Aircraft Fuel Tank CoverThe contract calls for the precision fabrication of a military aircraft fuel tank cover, demanding strict adherence to aerospace-grade standards for form, fit, and function. It requires expert material sourcing and advanced manufacturing techniques to ensure structural integrity, durability, and operational reliability under extreme conditions. Fabrication must meet exacting technical specifications governed by defense and aviation industry requirements, with quality control processes integrated throughout production to guarantee compliance and performance. The solicitation is issued as a subcontract under the NAICS code 332322, targeting suppliers with specialized capability in aerospace component manufacturing. The opportunity is open for response until August 11, 2026, with no set-aside provisions specified, meaning all eligible entities may compete. The contracting entity is the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense, and while no specific performance location or point of contact is listed, all work must align with the operational and logistical needs of the military aerospace supply chain. Bidders must be prepared to deliver a fully certified, mission-critical component capable of integrating seamlessly into high-performance aircraft systems.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Precision Manufacturing of Silhouette TargetsThe contract calls for the precision manufacture of military-grade silhouette targets according to technical drawing NR 19204 7135385 Revision K, requiring expert cutting, forming, and finishing of steel or composite materials to fully comply with stringent military specifications. The work demands high accuracy in dimensional tolerances, material integrity, and surface finish to ensure operational effectiveness and durability under harsh training conditions. All components must be produced in alignment with defense standards, with no deviations permitted without formal approval. This is a subcontract opportunity issued by the Defense Logistics Agency under the Department of Defense, with a NAICS code of 332322 indicating specialized fabrication for defense purposes. The solicitation was posted on August 3, 2026, and responses are due by August 13, 2026. The place of performance and point of contact details are not specified, but the work is expected to be performed in support of U.S. military training requirements. Interested parties must submit proposals through the designated DIBBS portal by the deadline to be considered for award.

Defense Logistics Agency

POSTED

DEADLINE

Precision Cutting and Length Conformance ServicesThe contract requires precise cutting of aluminum bars into whole-foot lengths between 10 and 12 feet, with stringent dimensional accuracy and full traceability for all processed materials. The work must meet exacting standards to ensure uniformity and quality, as the output is intended for critical applications within the defense supply chain. Compliance with strict tolerances and documented tracking of each batch is mandatory to guarantee product integrity and accountability throughout the production process. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 332322 and will be performed to meet the technical and operational requirements of federal defense programs. Interested parties must submit responses by the deadline of August 17, 2026, with no set-aside designation specified, indicating open competition. The solicitation is accessible via the DIBBS platform, and all performance activities are expected to align with defense contract standards for precision manufacturing and material control.

Defense Logistics Agency

POSTED

DEADLINE

Trailer Decking Manufacturing and SupplyThe contract entails the manufacture and delivery of two trailer decking units that must fully comply with all technical, packaging, and quality standards established by the Defense Logistics Agency. The materials used in production are strictly limited to approved components, specifically Holden Industries part number 1320250-10, ensuring consistency and adherence to military-grade specifications. The work is classified as a subcontract under NAICS code 332322, indicating it falls within the forged and stamped metal product manufacturing sector, and is issued by the Department of Defense’s Land Supply Chain ESOc Buys division. All deliverables must be completed and submitted by the response deadline of August 7, 2026, with performance expected to meet rigorous military logistics and supply chain requirements. The solicitation is posted on the DIBBS platform and is intended for qualified subcontractors capable of fulfilling exacting defense procurement standards without deviation.

LAND SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Precision Metal Fabrication and MachiningThe contract calls for the precision fabrication of the 'COVER, ACCESS' component using sheet metal forming, cutting, welding, and finishing processes, all aligned with military specifications and detailed technical drawings. The work requires strict adherence to quality standards and dimensional accuracy expected for defense-related applications, ensuring reliability and durability under demanding operational conditions. This is a subcontract opportunity under the NAICS code 332322, which classifies it within the sheet metal work manufacturing sector. The solicitation was posted on August 3, 2026, with a response deadline of August 12, 2026, and is managed by the ASC COMMODITIES DIVISION under the Department of Defense. The place of performance and point of contact information are not specified, indicating that the location and primary liaison may be determined after award or are internal to the contracting entity. Interested parties can access the official solicitation through the provided DIBBS link to review all technical requirements, submission guidelines, and evaluation criteria necessary for a compliant bid.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Fabrication of Metal Enclosure Components (Cover, Box, Accessories)The contract calls for the manufacture and supply of fabricated metal enclosure components including a cover, box, and associated accessories, all built to meet military specifications through precise cutting, bending, welding, and finishing operations. Full compliance with MIL-STD-129 for marking, ASTM D3951 for packaging, and DLA RP001 for palletization is mandatory to ensure uniformity, traceability, and readiness for military logistics systems. The work is classified as a subcontract under NAICS code 332322 and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Bidders must submit proposals by August 18, 2026, with the solicitation posted on August 3, 2026, and all deliveries must adhere strictly to the defined standards for identification, protection, and transportation of the finished components.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solenoid Separator Plate SupplyThe contract is a small business set-aside for the supply of 215 solenoid separator plates intended for use in electromechanical or defense systems, with all deliveries made FOB Origin. The procurement is classified under NAICS code 332322 and is administered by the Strategic Acquisition Program Directorate under the Department of Defense. Only small businesses are eligible to respond, as this is a total small business set-aside per FAR 19.5, ensuring that the opportunity is reserved exclusively for businesses meeting SBA size standards. The solicitation was posted on August 3, 2026, with responses due by August 18, 2026, and the contract is structured as a subcontract under a larger acquisition framework. The place of performance and point of contact details are unspecified, and while the delivery terms specify FOB Origin, the recipient assumes all transportation risks and costs once the goods leave the supplier’s location. The solicitation can be accessed via the DIBBS portal using the provided link.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

CLAMP, REPAIR, PIPE

Solicitation # SPE7M3-26-T-7822

The contract pertains to the procurement of two clamp repair pipe units with a nominal pipe size of 4 inches and a length of 7.5 inches, identified by NSN 4730-01-014-8717 and part number 226-048007-000. The total quantity required is two units, each priced at $2.00, with delivery required within 20 days from the contract award date, FOB origin, and no tolerance for variance in quantity. Inspection and acceptance occur at the destination, and all items must be packaged in compliance with ASTM D3951, though DLA Master List of Technical and Quality Requirements take precedence. Packaging must be marked and labeled per MIL-STD-129, and the unit of issue is each (EA), with packaging quantity per unit pack specified in the contract. The items must be palletized according to DLA packaging requirements and shipped via traceable freight methods, not parcel post. Delivery is directed to Fort Hood, Texas at Building 4925, Santa Fe Avenue, with the designated mark for and shipping address being the same. The shipment must be accompanied by the tracking control number W50YEF62090230 and must arrive no later than July 31, 2026, as per the original required delivery date. The solicitation number is SPE7M3-26-T-7822, issued under the NAICS code 332996 by the DLA Fluid Handling Division under the Department of Defense. All technical and quality specifications referenced by R or I codes are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date. The primary point of contact is William Cain, and the contract is accessible via the DIBBS portal.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 11 hours ago

DEADLINE

COUPLING HALF, QUICK

Solicitation # SPE7M3-26-T-7831

The contract pertains to the procurement of 29 units of a Coupling Half, Quick Disconnect with NSN 4730-01-603-5705 and part number 60CHD2-33446, issued under solicitation SPE7M3-26-T-7831 by the Department of Defense’s Fluid Handling Division. The item is to be delivered FOB origin within 167 days of the contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply strictly with ASTM D3951 and MIL-STD-129, while adhering to DLA Packaging Requirements as outlined in RP001. The DLA Master List of Technical and Quality Requirements supersedes any conflicting standards. Each unit must be labeled and packed in accordance with specified government protocols, with the Unit of Issue being each (EA) at a unit price of $29.00, totaling $841.00. Delivery is directed to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with an original required delivery date of October 14, 2026, and a need ship date of February 1, 2027. Transportation procedures follow DLAD Proc Notes C19 and C20, and all items must be palletized as mandated. The contract enforces the removal of government identification from non-accepted supplies and references applicable technical and quality specifications listed in the DLA Master List, with revisions controlled by either the solicitation issue date or award date depending on acquisition size.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7M4-26-T-299T

This contract is for the procurement of four units of a flexible air duct hose, identified by part number DAYFLEX DFD-T and NSN 4720-01-668-9666, under solicitation SPE7M4-26-T-299T. The supplier must deliver the items within 20 days of award, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific marking and palletization requirements as defined by DLA packaging standards. The product is exempt from shelf life restrictions and strictly forbidden from containing any Class I ozone-depleting chemicals, with any substitutes requiring prior approval unless explicitly permitted by the specification. The items are destined for distribution through the DLA logistics network, with primary delivery to M29021 at Camp Kinser, JP, and tracking reference M20220. The unit of issue is each, priced at $4.00 per unit for a total of $16.00, and the contract mandates adherence to all applicable technical and quality requirements referenced through the DLA Master List. The solicitation was posted August 4, 2026, with responses due by August 17, 2026; the required delivery date is July 31, 2026, and the contract is associated with project TP 2 and a government use identifier IPD 05.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 11 hours ago

DEADLINE

LINER, SEAL, PROPELLE

Solicitation # SPE7M4-26-T-299U

The contract solicits one each of two identified liner, seal, and propeller components under NSN 2010-01-515-8037, with delivery required within 20 days to two distinct U.S. Navy vessels—the USS America LHA-6 and USS Wasp LHD-1—via FOB destination terms. Both line items carry zero quantity variance and mandate compliance with MIL-STD-2073-1E packaging standards, including preservative methods, containment types, and unit packaging codes, alongside MIL-STD-129 marking requirements and DLA-specific palletization guidelines. Mercury or mercury-containing compounds are strictly prohibited in or on the supplied hardware except for specified functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with portable devices containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Shipments must use traceable freight methods and not parcel post, with designated freight and delivery addresses provided for each recipient. The solicitation, issued under SPE7M4-26-T-299U, references DLA’s master list of technical and quality requirements, governed by revisions effective on the solicitation or award date depending on acquisition size, and incorporates specific government use codes, project identifiers, and contact information for fulfillment and tracking. Delivery deadlines are set for July 30, 2026, and August 4, 2026, respectively.

Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 11 hours ago

DEADLINE

CRADLE, WEIGHING

Solicitation # SPE7M4-26-T-299N

The contract pertains to the procurement of two CRADLE, WEIGHING units under solicitation SPE7M4-26-T-299N, with a delivery requirement of 20 days after contract award. Technical data associated with this item is subject to export controls under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with a valid US/Canada Joint Certification Program certification, completion of required DOD export control training, and approval from the DLA controlling authority may access the controlled data. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, and the North American Industry Classification System code is 333310. The place of performance is Keyport, WA, 98345-7610, and the contract is managed by the Fluid Handling Division of the Department of Defense. The primary point of contact is Rory O’Reilly, reachable via email and phone provided. Additionally, the vendor must be a CMMC Level 2 Certified Third-Party Assessment Organization to meet cybersecurity requirements.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 11 hours ago

DEADLINE

CONN ROD RH HNG SD

Solicitation # SPE7M4-26-T-299R

This item, a right-hand connecting rod with a hinge side, manufactured from carbon, is part of a defense procurement under the NSN 2040-01-454-9180 and is subject to strict export control regulations due to the inclusion of technical data governed by either the International Traffic in Arms Regulations or the Export Administration Regulations. Any disclosure or transfer of this technical data to foreign persons, including foreign nationals within the United States or to foreign subsidiaries of U.S. companies, requires prior authorization from the U.S. Department of State or Department of Commerce, and the DFARS 252.225-7048 clause applies to ensure compliance. Only DLA contractors with an approved U.S./Canada Joint Certification Program certification, who have completed mandatory training on handling export-controlled technical data and submitted the required DLA questionnaire, are permitted access to this information. The contract is tied to purchase request 7017720053, with a single unit required for delivery within 20 days after award. The solicitation, numbered SPE7M4-26-T-299R, was posted on August 4, 2026, with a response deadline of August 17, 2026, under NAICS code 332510 for machine shop, turned product, and screw machine product manufacturing, and is administered by the Department of Defense’s Fluid Handling Division. The point of contact for inquiries is Rory O’Reilly, reachable at the provided email and phone, with performance to take place at FPO, ZIP 09534.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

MONITOR, MANUAL FLOW

Solicitation # SPE7M3-26-T-7826

The contract pertains to the procurement of one unit of a MONITOR, MANUAL FLOW WATER CANNON with NSN 4730-01-591-7199, sourced from STANG INDUSTRIES, INC under part number 925250-51, featuring 304 stainless and aluminum bronze swivels of 2.5 inch nominal size. The item must be delivered within 20 days FOB origin with no quantity variance permitted, inspected and accepted at the destination. Packaging must comply with ASTM D3951 as supplemented by all applicable DLA Master List of Technical and Quality Requirements, which override any conflicting standards, and all packaging and labeling must adhere to MIL-STD-129. Palletization is required per DLA Packaging Requirements for Procurement, and government identification must be removed from non-accepted supplies. The sole delivery point is the W90RFA facility in Binghamton, NY, with shipment required via the fastest traceable method—parcel post is prohibited. The unit of issue is each (EA), with a total price based on a unit price of $1.00, referenced under purchase request 7017722299. The contract is issued under solicitation SPE7M3-26-T-7826 with an original required delivery date of July 30, 2026, and the point of contact is William Cain of the DLA Fluid Handling Division.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 11 hours ago

DEADLINE

CLEANER, PRESSURE, SO

Solicitation # SPE7M4-26-T-299Y

This contract issued by the Defense Logistics Agency under solicitation SPE7M4-26-T-299Y specifies the procurement of one unit of a pressure cleaner, identified by NSN 4940-01-738-4241 and part number RAM-5DC-ID-60-2C, supplied by GOODWAY TECHNOLOGIES CORPORATION. The item must be delivered within 20 days to the USNS HECTOR A CAFFERATA at Dock 5, 8511 KERNS STREET, SAN DIEGO CA 92154, with delivery terms FOB ORIGIN and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, container types, and marking requirements. Ozone-depleting chemicals are strictly prohibited in the product or its components, overriding any conflicting specification but not exempting compliance with performance standards; alternate chemicals require prior approval unless explicitly authorized. The item must be shipped via traceable freight methods, and parcel post is explicitly forbidden. All technical and quality requirements are governed by the DLA Master List, with the controlling revision determined by the solicitation issue date. The contract includes detailed logistics codes, project identifiers, and government use fields, with the original required delivery date set for July 30, 2026.

Other Electronic Component Manufacturing

POSTED

about 11 hours ago

DEADLINE

COVER, VACUUM TEST

Solicitation # SPE7M4-26-T-299L

The contract encompasses the procurement of three vacuum test covers identified by NSN/Part Number 4921-00-895-7026, with a delivery requirement of 20 days after order placement. The solicitation, issued under SPE7M4-26-T-299L, is open to full and open competition and falls under NAICS code 333310, indicating it relates to plumbing and heating equipment and commercial-type air conditioning. The item must comply with stringent cybersecurity requirements as the vendor must be a CMMC Level 2 Certified Third-Party Assessment Organization and handle Covered Defense Information in accordance with applicable standards. All technical and quality specifications referenced are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on the acquisition size. The contract imposes strict limitations on materials and data handling. Ozone-depleting chemicals are explicitly prohibited, and any substitute chemicals must be submitted for approval unless already authorized by specification. Technical data associated with this item is subject to export controls under either ITAR or EAR, requiring prior authorization for any export or disclosure to foreign persons, including foreign nationals in the U.S. and subsidiaries. Access to such data is restricted to contractors who hold valid JCP certification, have completed mandatory DOD export control training and DLA’s questionnaire, and have been formally approved by DLA. Packaging must adhere to DLA procurement standards, and government identification must be removed from non-accepted supplies. Performance is scheduled for Keyport, WA, and inquiries should be directed to Rory O’Reilly at the provided contact details.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 11 hours ago

DEADLINE

HOSE ASSEMBLY, NONME

Solicitation # SPE7M4-26-T-300C

The contract pertains to a nonmetallic hose assembly with part number 74D461053-1005 and NSN 4720-01-279-8980, issued under solicitation SPE7M4-26-T-300C as a total small business set-aside. A single unit is required to be delivered within 20 days of award, with delivery terms FOB origin and inspection and acceptance also occurring at the manufacturer’s facility. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which supersede any conflicting specification provisions. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by the specification. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s packaging requirements, while unit level identification is not required per customer request. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise specified, and attributes are classified with verification levels or AQLs as defined in the contract. The item must be shipped by the fastest traceable means, excluding parcel post, to the specified delivery address in Belle Chasse, Louisiana. The contract specifies a required delivery date of July 31, 2026, and references detailed logistics, billing, and agency data for government use only, with Blake Tushar designated as the primary point of contact.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7M4-26-T-299S

The contract pertains to the procurement of a CAP, VALVE with NSN 4810-01-609-6231 and part number 222104 from EATON CORPORATION, with a quantity of 2 units to be delivered within 20 days of contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any referenced standards, including ASTM D3951 and MIL-STD-129 for packaging and labeling. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan, with critical attributes requiring zero non-conformances in the sample lot. The product is classified as a critical application item, and any deviations require formal engineering change proposals or variance requests. Packaging must adhere to DLA-specific guidelines, including palletization per RP001 and labeling per MIL-STD-129, with no tolerance for quantity variance. Delivery is FOB origin to the destination address in Jacksonville, Florida, with inspection and acceptance also at destination. Shipping must occur via traceable freight methods, explicitly prohibiting parcel post. The contract is issued under solicitation SPE7M4-26-T-299S with a required delivery date of July 31, 2026, and is managed by the Department of Defense’s Fluid Handling Division, with point of contact Rory O’Reilly.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 11 hours ago

DEADLINE

RETAINER, PACKING

Solicitation # SPE7M4-26-T-299M

The contract pertains to the procurement of one retainer, packing with NSN 5330-01-107-0675, under solicitation SPE7M4-26-T-299M, issued by the Defense Logistics Agency’s Fluid Handling Division. The item is subject to strict export control regulations under either ITAR or EAR, meaning any handling, disclosure, or transfer of associated technical data to foreign persons—whether inside or outside the United States—is prohibited without prior authorization from the Department of State or Commerce. Only contractors approved by DLA through the US/Canada Joint Certification Program, who have completed mandatory training on handling export-controlled technical data and submitted the required DLA questionnaire, may access this information. The contract requires compliance with DFARS 252.225-7048, and the delivery must be completed within 20 days after order placement. The solicitation is open for competition with no set-aside preferences, and responses are due by August 17, 2026. The place of performance is Silverdale, WA 98315-7000, and primary point of contact is Blake Tushar, reachable via email and phone provided.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 11 hours ago

DEADLINE