Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Marine Engine and Propulsion Systems Supply

Open

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Illinois Operations agency involves the supply of high-performance marine engines and propulsion systems for state police vessel projects. The scope of work includes sourcing, testing, and delivering high-horsepower marine engines, outboard and inboard motors, propellers, shafts, and steering systems that meet specific interceptor requirements. The contractor is responsible for providing propulsion systems that are either delivered or fully installed. All equipment must include manufacturer warranties and comply with EPA marine engine certifications. Performance of the contract is centered in Springfield, Illinois, under NAICS code 336412.

General Info

Subcontract for supplying and installing high-performance marine engines for Illinois state police vessels.

Agency

Illinois → Operations

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

Springfield, IL, 62703, USA

Set-Aside

NONE

Documents

This scope was carved out of 26-493ISP-OPERA-B-51325.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

26-493ISP-OPERA-B-51325 | THIS IS NOT A SOLICITATION. Piggyback Agency Specific Contract-Metal Shark Vessel via GSA contract G

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMar 25

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyIllinois → Operations

ContactsNo contacts available

OfficeN/A

Organization / AgencyIllinois → Operations

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies high-performance marine engines and propulsion systems for prime contractors on Illinois State Police vessel projects. Sources, tests, and delivers high-horsepower marine engines, outboard/inboard motors, propellers, shafts, and steering systems compatible with interceptor specifications. Requires EPA marine engine certifications and manufacturer warranties. Delivers installed or delivered propulsion systems.

Similar Contracts

Same NAICS industry code

ELEMENT ASSEMBLY OIL

Solicitation # SPE7L5-27-T-0698

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 19 hours ago

DEADLINE

HOUSING ASSY, SERVO

Solicitation # SPE4A5-27-T-2962

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

MANIFOLD, HYDRAULIC

Solicitation # SPE7M3-27-T-1216

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

HOSE, NONMETALLIC

Solicitation # SPE7M0-27-T-1151

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

VALVE, FUEL SHUTOFF

Solicitation # SPE7M4-27-T-3073

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

NOZZLE, LUBRICATING,

Solicitation # SPE4A7-27-T-3592

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

SCREW, CAP, SOCKET HEAD

Solicitation # SPE4A6-27-T-034P

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Accessory Gearbox Fabrication and AssemblyThis subcontract involves the fabrication and assembly of new spare Accessory D Gearboxes, part number 305-100-208-0, to support prime contractors on Air Force Sustainment Center projects. The scope of work encompasses the entire production lifecycle, including component procurement, fabrication, and the final assembly of the gearbox units. To ensure compliance with Air Force specifications, the contractor must utilize precision machining equipment and specialized testing rigs for functional verification. Managed under the Department of Defense through DLA Aviation at Oklahoma City, the project requires the completion of a Source Approval Request package. The primary objective is the delivery of fully inspected and tested gearbox units that meet all technical requirements. Interested parties should note the response deadline of November 17, 2026, for this effort categorized under NAICS code 336412.

Ok DLA Aviation At Oklahoma City

POSTED

about 24 hours ago

DEADLINE

Afterburner Flameholder FabricationThis subcontract for Afterburner Flameholder Fabrication involves the manufacture of Flameholder Afterburners under NSN 2840-01-231-1048 for prime contractors supporting DLA Aviation projects. The scope of work requires the precision machining, welding, and forming of high-temperature alloys to strictly adhere to J85 engine afterburner specifications. To execute these requirements, the contractor must utilize CNC milling, turning, and specialized aerospace welding equipment. The project is managed under the Department of Defense through DLA Aviation at Oklahoma City and falls under NAICS code 336412. A critical requirement for this contract is that the provider must maintain AS9100 quality management certification to ensure aerospace standards are met for all delivered finished units. The response deadline for this opportunity is December 7, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

about 24 hours ago

DEADLINE

29--PUMP,FUEL,JET ENGIN

Solicitation # SPRPA127QYA12

This solicitation, issued by DLA Aviation at Philadelphia, is a request for quotations for a new spares requirement involving one fuel pump for jet engines (NSN 7RH 2915-01-563-0647). The requirement is a fixed-price acquisition with a delivery deadline of 90 days, FOB Destination. Award will be made to a single, responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. The government will utilize the DoD Supplier Performance Risk System (SPRS) to evaluate supplier risk and historical pricing. Strict compliance is required for distributors, who must submit an unredacted OEM Distributor Letter authorizing the resale of the specific part number at the time of proposal submission to avoid being deemed non-responsive. The contract mandates higher-level quality requirements (ISO 9001 or equivalent) and incorporates specific standards for packaging (MIL-STD-2073) and marking (MIL-STD-129). Key safety and security provisions include the identification of Critical Safety Items (CSI) and adherence to NIST SP 800-171 assessment requirements. Payment and receiving reports must be processed electronically via the Wide Area Workflow (WAWF) system.

Pa DLA Aviation At Philadelphia

POSTED

about 24 hours ago

DEADLINE

GAS TEMPERATURE EXHAUST THERMOCOUPLE / 56F, B-1B LANCER AIRCRAFT

Solicitation # SPE4A727R0052-Synopsis

POSTED

about 24 hours ago

DEADLINE

in about 1 month

New Manufactured Material, NSN: 2840-01-286-0722 OK (AMC 3R)

Solicitation # SPRTA1-27-R-0071

Solicitation SPRTA1-27-R-0071 is a Firm Fixed Price request issued by the Defense Logistics Agency Aviation at Oklahoma City for the procurement of aircraft turbine nozzles, NSN 2840-01-286-0722. The requirement specifies a quantity range between 19 and 115 units, with a base equipment quantity of 77 units. All items must be delivered to SW3211, Tinker AFB, on or before January 31, 2030. Inspection and acceptance will occur at the origin, and a receiving report is required for final acceptance. The items are designated as Critical Safety Items and must adhere to Higher Level Contract Quality standards. Compliance with MIL-STD-1279 Revision 1 for military marking and DFARS 252.211-7003 for Item Unique Identification and Valuation is mandatory. Additionally, the contractor must meet Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements and provide a Small Business Subcontracting Plan. The procurement is subject to the Buy American Act and Balance of Payments Program, with Breann Irving serving as the primary point of contact.

Ok DLA Aviation At Oklahoma City

POSTED

about 24 hours ago

DEADLINE

More opportunities from Illinois → Operations

Same awarding agency

Bullet Trap Installation and LevelingThis subcontract for Bullet Trap Installation and Leveling involves providing specialized technical grading and rubber media installation for Illinois State Police range projects. The scope of work requires the installation of 34,000 lbs of granular rubber media, including the precise leveling and grading of the trap to meet manufacturer specifications for depth and compaction. Additionally, the contractor is responsible for installing all necessary framing, anchors, and liners to deliver a fully completed bullet trap backstop. The project mandates strict adherence to OSHA safety standards specifically tailored for lead environments. This opportunity is categorized under NAICS code 238990 and is managed by the Illinois Operations agency. Interested parties should note the response deadline of November 16, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Granular Rubber Media SupplierThis subcontract agreement establishes a partnership for the supply of ballistic-grade granular rubber intended for Illinois State Police range projects. The selected supplier is responsible for furnishing approximately 34,000 pounds of new granular rubber media that adheres strictly to manufacturer specifications regarding depth, distribution, and compaction to ensure optimal ballistic performance. In addition to the physical materials, the supplier must provide all necessary product data and manufacturer specifications to the prime contractors. The scope of work includes the full delivery of the 34,000 pounds of media directly to the project site. This procurement is categorized under NAICS code 326199 and is managed through the Illinois Operations agency. Interested parties should note the response deadline of November 16, 2026, to be considered for this specialized supply role.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Lead-Contaminated Waste Removal and DisposalThis subcontract involves the removal, containment, transportation, and disposal of lead-contaminated rubber and debris for prime contractors working on Illinois State Police range projects. The scope of work requires the use of dust suppression methods for rubber removal and strict adherence to RCRA hazardous waste regulations regarding generation, labeling, and manifesting. All waste must be packaged in UN-DOT approved containers in compliance with 40 CFR 261-265 and OSHA Lead and Respiratory standards. The contractor is responsible for delivering a final documentation package that includes all necessary manifests and recycling certificates. This project falls under NAICS code 562910 and is managed by the Illinois Operations agency. Interested parties must note the response deadline of November 16, 2026.

Remediation Services

POSTED

DEADLINE

Range Backstop Rebuild

Solicitation # 26-493ISP-OPERA-B-54769

The Illinois State Police is soliciting a contractor for the Range Backstop Rebuild under solicitation 26-493ISP-OPERA-B-54769. The project requires the contractor to rebuild a bullet trap backstop within a strict 10-day range closure window. The scope of work includes furnishing and installing approximately 34,000 pounds of new granular rubber media, leveling and grading the trap according to manufacturer specifications for ballistic performance, and removing displaced rubber and debris using methods that prevent the spread of lead-contaminated dust. The vendor must act as the hazardous waste generator, managing all manifests, labeling, and documentation for lead-contaminated materials. Due to the nature of the work, the contractor must adhere to stringent safety and environmental regulations, including OSHA Lead and Respiratory Protection Standards and EPA RCRA hazardous waste requirements. All lead-contaminated waste and PPE must be packaged in UN-DOT approved containers. To be eligible for award, the vendor must provide a detailed work plan and schedule, a site-specific safety plan covering RCRA waste management, and manufacturer specifications for the rubber media. Additionally, the vendor must maintain comprehensive insurance, specifically including 10 million dollars in Lead Pollution Liability insurance. Payments are processed upon contract completion or based on agreed-upon milestones in accordance with the State Prompt Payment Act.

Remediation Services

POSTED

DEADLINE

Supplier of UTM 5.56mm Man Marker RoundsThis subcontract involves the supply of brand-name Ultimate Training Munition 5.56mm Man Marker Rounds to prime contractors supporting Illinois State Police projects. The required munitions must be non-toxic, available in red or blue, and meet specific performance standards including a velocity not exceeding 400 fps and an accuracy threshold of within 2 inches at 25 yards. The supplier is responsible for providing detailed specification sheets and coordinating the delivery of all physical materials to Springfield, Illinois. To qualify, the supplier must maintain full compliance with all applicable federal and state munitions laws and provide a valid Certificate of Insurance. This opportunity was posted on November 6, 2026, with a response deadline of November 16, 2026. The contract falls under NAICS code 332994 and is managed through the Illinois Operations agency.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

DCI-SOCOM-Training Munitions

Solicitation # 27-493ISP-OPERA-B-54799

The Illinois State Police Special Operations Command is soliciting a one-time purchase of brand name Ultimate Training Munition (UTM) 5.56mm Man Marker Rounds in red or blue for use in tactical training and SWAT operations. To be considered acceptable, the munitions must be non-toxic, maintain an accuracy within 2 inches at 25 yards, and have a velocity no greater than 400 feet per second. Vendors are required to submit a detailed specification sheet including the brand and model name to verify these technical requirements. All supplies must be delivered to the Illinois State Police at 4700 Rodgers Street, Springfield, Illinois, within 120 calendar days of the order, with deliveries accepted Monday through Friday from 8:30am to 4:00pm. This procurement is governed by the Illinois Procurement Code and the State Prompt Payment Act, with specific requirements for prevailing wages and the Minority Contractor Initiative Fee. Vendors must provide a Certificate of Insurance naming the State as additionally insured and adhere to all federal and state laws regarding the manufacturing, labeling, and delivery of supplies. Invoices for the contract must be submitted to the DCI SOCOM Fiscal office in Springfield, with a strict deadline of July 31 for all expenses incurred through June 30 of any given year. The contract may be funded in part or in full through federal funds.

Small Arms Ammunition Manufacturing

POSTED

DEADLINE

Supply of UTM 5.56mm Man Marker RoundsThis subcontract involves the supply of brand-name Ultimate Training Munition 5.56mm Man Marker Rounds in red or blue for prime contractors supporting Illinois State Police training contracts. The scope of work requires the delivery of physical munitions and corresponding technical specification sheets to designated ISP locations, specifically within Springfield, Illinois, to ensure full compliance verification. To fulfill the contractual obligations, the provider must submit a Certificate of Insurance that names the State of Illinois as additionally insured. The agreement is categorized under NAICS code 424990 and is managed through the Operations agency of the State of Illinois.

Other Miscellaneous Nondurable Goods Merchant Wholesalers

POSTED

about 1 month ago

DEADLINE

sUAS Replacement BladesThis subcontract involves the manufacturing or sourcing of replacement propeller blade pairs compatible with the DJI Matrice 30T for prime contractors working on Illinois State Police sUAS projects. The contract is managed by the Operations agency in Illinois, with the place of performance located in Springfield, zip code 62703. A critical requirement of this agreement is that all components must be manufactured within 12 months of their delivery date. The project falls under NAICS code 334111 and was posted on September 17, 2026.

Electronic Computer Manufacturing

POSTED

about 2 months ago

DEADLINE

DJI Matrice 30T Flight and Remote BatteriesThis subcontract involves the sourcing and delivery of intelligent flight batteries and remote controller batteries for prime contractors supporting Illinois State Police sUAS projects. The contractor is responsible for providing batteries that are fully compatible with the DJI Matrice 30T, with a strict requirement that all units must have been manufactured within 12 months of the delivery date. The contract is managed under the Operations agency in Illinois, with the place of performance located in Springfield. Classified under NAICS code 335911, the agreement ensures the availability of critical power components necessary for the operational success of the specified drone systems.

Storage Battery Manufacturing

POSTED

about 2 months ago

DEADLINE

DJI Matrice 30T Parachute Recovery SystemsThis subcontract involves the manufacture and delivery of specialized parachute recovery systems, deployment mechanisms, and validation documentation for the DJI Matrice 30T platform. These systems are intended for prime contractors supporting Illinois State Police sUAS projects, with all hardware required to be manufactured within 12 months of delivery. The project is managed under the Operations agency in Illinois, with the place of performance located in Springfield, 62703. Classified under NAICS code 334111, the contract focuses on providing validated recovery hardware specifically engineered for the designated drone platform.

Electronic Computer Manufacturing

POSTED

about 2 months ago

DEADLINE

Vehicle-Assisted Breaching HooksThis subcontract involves the manufacture and delivery of high-strength vehicle-assisted breaching hooks for prime contractors working on projects for the State of Illinois Operations agency. The equipment must be constructed from high-strength alloy steel and maintain a minimum working load of 13,000 lbs, with all working load limits and breaking strengths clearly marked on the hardware. The contract is categorized under NAICS code 332312 and is centered in Springfield, Illinois. It focuses on the production and supply of specialized breaching equipment to meet the specific operational requirements of the state agency.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Collapsible Breaching Tools (Halligan & Sledge)This subcontract involves the manufacture and delivery of collapsible tactical breaching tools, specifically Halligan tools and sledgehammers, for prime contractors working on State of Illinois Operations agency projects. The equipment must be constructed from aluminum and chromium/molybdenum alloy steel and strictly adhere to the Breaching Equipment Spec Sheet revised on March 19, 2026. The contract is categorized under NAICS code 332312 and is centered in Springfield, Illinois. It serves as a critical supply chain component for tactical equipment delivery to support state-level operational requirements.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Lycoming IO-540-AB1A5 Aircraft Engine

Solicitation # HQ401674R

Department of Transportation

POSTED

CLOSED

MGA Rebuilt Lycoming Engines rebid

Solicitation # 58300-eRFQ-000001669-2026

Middle Georgia State University

POSTED

CLOSED

Used Aircraft Supply and Delivery

POSTED

CLOSED

Custom Mission Seating System for King Air B350ER Aircraft

Department of Military Affairs

POSTED

CLOSED

MGA Rebuilt Lycoming Engines

Solicitation # 58300-eRFQ-000001550-2026

Middle Georgia State University

POSTED

CLOSED

MGA Rebuilt Lycoming Engines

Solicitation # 58300 MIDDLE 58300-eRFQ-000001550-2026

Middle Georgia State University

POSTED

CLOSED

Specialty Aircraft Component Supply

Florida Department of Military Affairs (DMA)

POSTED

CLOSED

PULLEY, BUSHING,A/C GENERATOR - REF 2095814

Solicitation # 2095814

Dallas Area Rapid Transit

POSTED

CLOSED

Mount Engine Rear - Ref 2095784

Solicitation # 2095784

Dallas Area Rapid Transit

POSTED

about 1 year ago

CLOSED

SPACER, (1/2 ID) ENGINE MOUNT - ref 2095721

Solicitation # 2095721

Dallas Area Rapid Transit

POSTED

about 1 year ago

CLOSED

about 1 year ago

Aircraft Engine Parts Supply (Factory New)

NYS Department of Police

POSTED

about 1 year ago

CLOSED

Ohio University - Aircraft Engine Overhauls

Solicitation # 0920252299

Ohio University

POSTED

about 1 year ago

CLOSED

about 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS