Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on September 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Marine-Grade Aluminum Pier Ladder Fabrication

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312
New
ACE-1199-1386-00 Tower Design and Fabrication for Various RCAG/RTR Sites (ADM, DPA, ONL, and RWF)
Solicitation # ace-1199-1386-00-tower-design-fabrication-various-rcagrtr-sites-adm-dpa-onl-rwf
Parsons Corporation is soliciting bids for the design, fabrication, and delivery of towers for various RCAG/RTR sites located in Oklahoma, Illinois, Nebraska, and Minnesota, specifically serving the ADM, DPA, ONL, and RWF locations. This project falls under NAICS code 332312 and requires that the selected offeror be fully bonded and insured to perform the work. This opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 2, 2026. The primary point of contact for this solicitation is Thomas Sheehan.
Parsons Corporation

POSTED

about 6 hours ago

DEADLINE

in 4 days
NAICS: 332312
New
SLED
Custom Steel Bench FabricationThis subcontract opportunity involves the custom fabrication of four steel benches for prime contractors working on Baltimore City Recreation and Parks projects. The scope of work requires the fabrication of the benches with integrated factory dividers and the application of a protective paint or coating to ensure durability. The project is categorized under NAICS code 332312 and is managed through the state of Maryland. Interested parties must submit their responses by the deadline of December 2, 2026.
Baltimore City Recreation and Parks

POSTED

about 17 hours ago

DEADLINE

in about 1 month
NAICS: 332312
New
DIBBS
Fabrication of Stackable Storage and Transport Frames (NSN 8145-01-586-0404)This subcontract involves the fabrication of 15 stackable storage and transport frames for prime contractors supporting Department of Defense supply contracts. The manufacturer must produce the frames in accordance with the technical specifications for NSN 8145-01-586-0404 and part number 06080-A4, utilizing industrial processes such as metal stamping, welding, or bending. The contractor is required to maintain strict adherence to the DLA Master List of Technical and Quality Requirements and ensure full compliance with the Buy American Act. Performance for this contract is centered at Fort Bliss, Texas, under NAICS code 332312.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 19 hours ago

DEADLINE

in 11 days
NAICS: 332312
New
DIBBS
Supply of Square/Rectangular Metallic Tubing (ASTM A513)This subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the manufacture or sourcing of square and rectangular metallic tubing for prime contractors. The specific requirements call for 1 inch square tubes with a 0.125 inch wall thickness and 24 feet length, adhering to ASTM A513 Grade MT 1010 to MT 1020, Type 2 (A.W.C.R.), Flash In standards. The contractor must utilize precision cutting and forming equipment to ensure all dimensional tolerances and DLA packaging requirements are met for the delivery of NSN 4710010841168. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332312, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, following the posting date of October 28, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 11 days
NAICS: 332312
New
DIBBS
Supply of Fire Hose Siamese ConnectionsThis subcontract involves the procurement and delivery of 116 Siamese Connections for fire hoses, identified by NSN 4210-00-255-0232, to support prime contractors fulfilling DLA supply contracts. The project is managed under the Department of Defense through DLA DIST SAN JOAQUIN, with the place of performance located in Tracy, California. The contractor is required to adhere to strict quality assurance and packaging standards, specifically performing sampling per MIL-STD-1916 or ASQ H1331 Table 1 and packaging items according to MIL-STD-2073-1E. All 116 units are to be delivered FOB Origin. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026, under NAICS code 332312.
DLA DIST SAN JOAQUIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
NAICS: 332312
New
DIBBS
Manufacture and Supply of Vehicular Bracket (NSN 2590016495289)This subcontract involves the manufacture and supply of a specific vehicular bracket, identified by NSN 2590016495289, for prime contractors supporting DLA supply contracts. The work is managed under the Department of Defense through the DLA Weapons Support Land Supply Chain ESOC Buys. The fabrication process must strictly adhere to Technical Data Package Rev B Gen 2 and basic drawing 19207 12580763, requiring the use of specialized tooling and materials to ensure all technical specifications are met. The final product is to be delivered to the Anniston Army Depot in Anniston, Alabama. This procurement falls under NAICS code 332312. Interested parties should note the posted date of October 28, 2026, with a response deadline set for November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 11 days
NAICS: 332312
New
DIBBS
Stainless Steel and Plated Hardware SupplierThis subcontract opportunity is for a supplier to provide internal work trays and external locking hardware for prime contractors supporting DLA Troop Support Medical Supply Chain projects. The scope of work involves the fabrication of removable stainless steel work trays and the manufacture of nickel-black plated steel latches and lockable drawer mechanisms. These components must be produced using precision metal stamping or machining and must strictly adhere to medical grade stainless steel standards. Managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, the contract falls under NAICS code 332312. The place of performance is located at APO 09227-0000. Interested parties should note the response deadline of November 3, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 5 days
NAICS: 332312
New
DIBBS
Fabrication of Vehicular Step AssembliesThis subcontract involves the fabrication of 22 completed vehicular step assemblies for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Engines. The manufacturer must produce parts according to NSN 2590-01-660-9231 and Oshkosh Defense LLC P/N 4344300 specifications, while ensuring strict adherence to the DLA Master List of Technical and Quality Requirements. Performance of the contract will take place in New Cumberland, Pennsylvania. A critical restriction is placed on the production process, as additive manufacturing is prohibited unless explicit authorization is granted by the ESA. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 19 hours ago

DEADLINE

in 11 days
NAICS: 332312
New
DIBBS
Precision Fabrication of Wiring Harness BracketsThis subcontract opportunity is for the precision fabrication of wiring harness brackets to support DLA Weapons Support ASC projects. The selected provider will be responsible for the machining, bending, or stamping of metal bracket components in strict accordance with TDP Rev C Gen 3 and Reference Drawing 81755, including all required surface treatments. This is a total small business set-aside under NAICS code 332312 for the Department of Defense. Qualified contractors must possess CNC machining equipment and maintain ISO 9001:2015 certification. Due to the nature of the work, strict adherence to ITAR/EAR compliance, US/Canada Joint Certification, and CMMC Level 2/DFARS 252.204-7012 standards is mandatory. Responses are due by November 6, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 8 days
NAICS: 332312
New
DIBBS
Roof Canopy Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of 39 Roof Canopy Assemblies for prime contractors supporting Department of Defense supply contracts. The work is managed through the DDSP New Cumberland Facility and requires all assemblies to be manufactured according to the technical specifications for NSN 5411014767136. The selected provider must perform rigorous quality assurance and inspections to ensure all units meet strict DLA technical requirements. Administrative requirements for this contract include active SAM registration and access to the Wide Area Workflow system. The project falls under NAICS code 332312, with the place of performance located in New Cumberland. Interested parties must submit their responses by November 9, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 19 hours ago

DEADLINE

in 11 days
NAICS: 332312
New
DIBBS
Pressure Tank Fabrication (NSN 2530010420683)This subcontract involves the fabrication of pressure tanks under NSN 2530010420683 for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support LSO Combat Vehicles and Armament. The manufacturer is required to produce pressure vessels in strict accordance with Basic Drawing NR 19207 11625104 and the Supplemental Quality Assurance Provision. All work must be performed using equipment capable of meeting rigorous military standards for fabrication and testing. The contractor is responsible for delivering the finished pressure tanks along with a Certificate of Quality Compliance for every lot produced. Performance for this contract is centered in Tracy, California, under NAICS code 332312. The solicitation period is open until November 9, 2026.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 19 hours ago

DEADLINE

in 11 days
NAICS: 332312
New
DIBBS
Marine Hatch Assembly (NSN 2040015355766)This subcontract involves the manufacture or procurement of one Marine Hatch assembly under NSN 2040015355766 for the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The contractor is responsible for ensuring the assembly is produced from marine-grade materials and adheres to strict marking, labeling, and packaging standards as defined by MIL-STD-129 and MIL-STD-2073-1E. Compliance requirements are rigorous, necessitating adherence to ITAR and EAR export controls, as well as CMMC Level 2 and NIST SP 800-171 security assessments. The final deliverable is a single completed, packaged, and labeled marine hatch assembly. Interested parties must respond by November 9, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 11 days

AI Contract Overview

Show more

This subcontract involves the fabrication and delivery of custom marine-grade aluminum ladders for prime contractors supporting the Naval Undersea Warfare Center Division in Keyport. The scope of work includes the production of twelve 20-foot straight ladders and two fixed pier ladders, constructed from 6061 marine-grade aluminum Schedule 40 2-inch tubing. These units must feature nonslip rungs and marine-grade stainless steel shackles to ensure durability and safety in maritime environments. The project is designated as a total Small Business Set Aside under NAICS code 332312. To be eligible, the manufacturer must provide certification of compliance with OSHA CFR 1910.399 and adhere to Buy American requirements. All completed ladders and associated hardware must be delivered to the performance site in Keyport, Washington.

General Info

Fabricate and deliver marine-grade aluminum ladders for Naval Undersea Warfare Center in Keyport.

Agency

Department Of Defense → Naval Undersea Warfare Center

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

Keyport, WA, 98345, USA

Set-Aside

SBA

Documents

This scope was carved out of N0025326Q0009.

The full solicitation package (20 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

KB Dock Piers Ladder Replacement

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Naval Undersea Warfare Center
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → Naval Undersea Warfare Center
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supplies custom-fabricated aluminum ladders for prime contractors on Naval Undersea Warfare Center (NUWC) Division, Keyport projects. Fabricates twelve 20-foot straight ladders and two fixed pier ladders using 6061 marine-grade aluminum Schedule 40 2-inch tubing with nonslip rungs and marine-grade stainless steel shackles. Requires manufacturer certification to OSHA CFR 1910.399 and Buy American compliance. Delivers completed ladders and hardware.

More opportunities from Department Of Defense → Naval Undersea Warfare Center

Same awarding agency

NAICS: 326199
New
Federal
Thermal Insulation and Aluminum Jacketing SupplyThis small business set-aside subcontract involves the supply of specialized thermal insulation and aluminum jacketing for prime contractors working on Naval Undersea Warfare Center projects in Keyport, Washington. The scope of work includes providing pre-formed fiberglass or closed-cell elastomeric insulation, aluminum all-weather jacketing, and removable thermal blankets specifically designed for pumps and valves. All supplied materials must be certified and rated for temperatures between 30°F and 140°F, while maintaining full compliance with the 2018 Washington State Energy Code. The selected provider is responsible for the delivery of these materials directly to the project site.
All Other Plastics Product Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 238290
New
Federal
Thermal Insulation and Weather-Lagging InstallationThis small business set-aside subcontract involves the installation of thermal insulation and weather-protective lagging for prime contractors at the Naval Undersea Warfare Center in Keyport, Washington. The scope of work requires fitting pre-formed fiberglass or closed-cell elastomeric insulation on 2-inch copper piping, including all associated pumps and valves. Additionally, the contractor must install aluminum all-weather jacketing using silicone sealant and verify the integrity of electrical heat tracing to ensure a fully insulated and weather-lagged piping run. All work must be performed in compliance with 2018 WSEC standards. This opportunity falls under NAICS code 238290 and is managed through the Department of Defense. Interested parties should note the response deadline of November 3, 2026.
Other Building Equipment Contractors

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 238290
New
Federal
WSTF Tank Pipe Insulation
Solicitation # N0025327Q0003
The Naval Undersea Warfare Center Division Keyport is soliciting quotes under RFQ N0025327Q0003 for the installation of thermal insulation and weather-protective lagging on an outdoor run of 2-inch nominal copper piping, spanning approximately 75 to 100 linear feet. The objective is to restore thermal efficiency and protect the piping and electrical heat trace from environmental exposure, requiring 100% coverage. All work must comply with the 2018 Washington State Energy Code and OSHA safety standards, with materials rated for temperatures between 30F and 140F. The project includes verifying the integrity of the heat trace system both before and after installation and utilizing removable thermal blankets for maintenance access at valves and pumps. This requirement is a 100% small business set-aside under NAICS code 238290, with a size standard of 22 million dollars in annual revenue. The contract is a firm fixed price award to be completed within 35 calendar days from the date of award, with delivery terms set as FOB Destination. Award will be based on the best value, evaluating technically acceptable offers based on price and past performance, with equal weight given to quality and delivery. Offerors must be registered in the System for Award Management and maintain a minimum of CMMC Level 1 certification. Submissions must be sent electronically to the designated points of contact, and all invoicing will be processed through Wide Area Workflow.
Other Building Equipment Contractors

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 336412
New
Federal
Refurbishment of Torque Motor Magnetic Field Ring Assemblies
Solicitation # N0025326R7006
Solicitation N0025326R7006, issued by the Naval Undersea Warfare Center Division Keyport, is for an Indefinite-Delivery Indefinite-Quantity (IDIQ) contract focused on the refurbishment and repopulation of torque motor magnetic field ring assemblies (DMISA RINGS). The scope of work involves the depopulation of existing magnets, refurbishment including potential grinding to meet final dimensions, and the installation of new replacement magnets for plated steel and stainless steel azimuth and elevation rings. The government has established a maximum order quantity of 2,540 units, with delivery timeframes generally set at 180 calendar days after the receipt of government furnished property. The contract will be awarded using the Lowest Price Technically Acceptable (LPTA) source selection process, evaluating offerors based on technical capability, risk management, and past performance. Key requirements include compliance with NAVSEA drawings 7447999 Rev I and 7448000 Rev F, as well as strict packaging standards requiring individual polyethylene wrapping and the use of government-supplied foam. Offerors must provide JCP and CMMC certifications to access secured drawings and submit a Test and Inspection Data Sheet with every delivery. Following two amendments, the final response closing date is November 2, 2026.
Aircraft Engine and Engine Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 238210
New
Federal
UPS Refurbishment
Solicitation # N0025327Q7001
Solicitation N0025327Q7001 was issued by the Naval Undersea Warfare Center Division Keyport for the refurbishment of an Eaton 9390 UPS system (Serial Number EG112CBC11) located in Building 893. The scope of work required a firm fixed price contract for the removal and disposal of internal components, installation of new modules and batteries, and final commissioning performed by a certified Eaton technician. The project included a 90-calendar day period of performance and required specific deliverables, including testing documentation, as-built drawings, and laminated operating instructions. The procurement was designated as other than full and open competition, restricted to authorized Eaton distributors under FAR 12.102(a), and set aside for Economically Disadvantaged Women-Owned Small Businesses (EDWOSB) under NAICS 238210. Award criteria were based on technical acceptability and best value, with price and past performance weighted equally. Mandatory requirements for offerors included a CMMC Level 1 certification and an OEM letter of authorization. However, per Amendment 0003 effective October 27, 2026, this solicitation has been cancelled in its entirety.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

2 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 561210
New
Federal
NUWC Keyport Moving Services
Solicitation # N0025327Q0002
The Naval Undersea Warfare Center Division Keyport is soliciting firm fixed price moving services under solicitation N0025327Q0002 to relocate the workspaces of 180 personnel from Building 1 to Building 894. The scope of work includes the transport of approximately 950 packed boxes, six security safes, 12 cabinets or shelving units, and other office equipment. This effort must be completed as a single consolidated evolution within five consecutive weekdays during standard working hours. The contractor is responsible for providing all labor, technical supervision, and material handling equipment, though they are specifically excluded from moving hazardous materials or individual personal electronics. This requirement is a total small business set-aside, specifically targeting Women-Owned Small Businesses and Service-Disabled Veteran-Owned Small Businesses under NAICS code 561210. To be considered technically acceptable, offerors must provide FOB Destination pricing, possess at least CMMC Level 1 certification with a valid Unique Identifier, and meet all security and background check requirements for base access. Award will be based on a best-value trade-off analysis considering price and past performance, with equal weight given to quality and delivery. All quotes must be submitted digitally via email by November 5, 2026, and must include completed representations and certifications via the System for Award Management.
Facilities Support Services

POSTED

7 days ago

DEADLINE

in 7 days
View Details
NAICS: 423510
Federal
Packing and Protective Material SupplyThis subcontract, titled Packing and Protective Material Supply, involves providing essential packing materials for prime contractors supporting projects at the Naval Undersea Warfare Center in Keyport. The scope of work includes the delivery of industrial-grade tape, cushioning materials, and heavy-duty cardboard boxes designed to secure fragile electronics and office equipment for 180 personnel. All materials must be delivered to the site before the designated relocation window begins. The opportunity is designated as a total Small Business Set Aside under NAICS code 423510. Managed by the Department of Defense, the contract was posted on October 21, 2026, with a response deadline of November 5, 2026. Performance will take place in Keyport, Washington.
Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 485991
Federal
Office and Industrial Equipment RelocationThis small business set-aside subcontract involves the physical relocation of workspaces, office equipment, and industrial assets for prime contractors supporting the Naval Undersea Warfare Center in Keyport, Washington. The scope of work includes the packing, transporting, and unpacking of various government properties, ranging from electronics and glass display cases to secure safes, utilizing specialized lifts and dollies to ensure damage-free delivery. To perform these services, personnel must possess REAL ID-compliant identification and complete BAVR/DBIDS registration for base access. The opportunity is categorized under NAICS code 485991, with a response deadline set for November 5, 2026.
Special Needs Transportation

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 331492
Federal
Silver Reutilization and Account Maintenance Service
Solicitation # N0025327Q0001
The Naval Undersea Warfare Center Division, Keyport is seeking a contractor for Silver Reutilization and Account Maintenance Services. The primary objective is the refinement of silver-bearing materials recovered from Silver/Zinc and Silver/Chloride batteries to achieve a purity of 99.9%, which will then be used to manufacture new batteries. Annual requirements include the processing of 328,060 troy ounces of high silver content material and 582,421 troy ounces of low silver content material, alongside the maintenance of silver accounts for 439,108 troy ounces. The government will handle the disassembly and categorization of batteries into high-yield and low-yield materials, with the exception of small batteries like AA-sized units. The government intends to award one Indefinite-Delivery Indefinite-Quantity (IDIQ) contract with a five-year ordering period using Lowest Price Technically Acceptable (LPTA) procedures. The contract will be Fixed-Price with Economic Price Adjustment based on the London Bullion Market Association Silver Price index. Performance will take place at the contractor's facility, with a requirement that refined silver be available for transfer within 60 days of receipt of materials. The contractor must maintain up to eight electronic accounts for various Navy programs and provide detailed reporting on materials processed, account balances, and quarterly progress. This is a full and open competition under NAICS code 331492, with the final Request for Quote expected around October 2026.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

9 days ago

DEADLINE

in 1 day
View Details
NAICS: 541519
Federal
Information Systems Security and OPSEC SupportThis small business set-aside subcontract provides comprehensive Information Systems Security, INFOSEC, and OPSEC support for prime contractors working on Naval Undersea Warfare Center Division Keyport projects. The scope of work includes the implementation of Insider Threat Programs, COMSEC, and CUI encryption utilizing specialized secure communication hardware and encryption software. Key deliverables involve conducting program reviews and performing CUI encryption audits to ensure operational security. Personnel assigned to this contract must maintain a Secret security clearance and ensure strict compliance with NIST SP 800-171 and SECNAV M-5510.36B standards. The opportunity is categorized under NAICS code 541519 and is associated with the Department of Defense. Interested parties must submit their responses by November 17, 2026.
Other Computer Related Services

POSTED

10 days ago

DEADLINE

in 19 days
View Details
NAICS: 561612
Federal
Physical, Personnel, and Force Protection Security ServicesThis small business set-aside subcontract for the Naval Undersea Warfare Center Division Keyport involves the implementation of physical security, personnel security, and force protection programs. The selected provider will be responsible for operating the Command Security Monitoring Center and Visitor Control Center, utilizing specialized access control hardware and visitor management systems to maintain security logs and visitor access records. All personnel must hold a Secret clearance and ensure strict compliance with SECNAV M-5510.30C and DoD 5220.22-M standards. The opportunity is categorized under NAICS code 561612, with a response deadline of November 17, 2026, for performance in the 98345 zip code area.
Security Guards and Patrol Services

POSTED

10 days ago

DEADLINE

in 19 days
View Details
NAICS: 541330
Federal
Facilities Engineering, Planning, and Maintenance SupportThis small business set-aside subcontract provides facilities engineering, strategic planning, and infrastructure maintenance support for prime contractors operating on Naval Undersea Warfare Center Division Keyport projects. The scope of work involves the planning and management of facilities programs through the use of engineering design tools and CMMS software, with final deliverables including infrastructure reports, engineering specifications, and comprehensive maintenance plans. Due to the nature of the work, personnel embedded within government workspaces are required to maintain a Secret security clearance. The contract falls under NAICS code 541330 and is managed under the Department of Defense. Interested parties must adhere to the response deadline of November 17, 2026.
Engineering Services

POSTED

10 days ago

DEADLINE

in 19 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332312
Closed
Federal
Structural Steel Fabrication & Erection
Navfacsyscom Mid-Atlantic

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 332312
Closed
Federal
Aluminum Fixed-Frame Window Assemblies Supplier
FA4661 7 Cons Cd

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 332312
Closed
Federal
Long-Lead Material Supply
W2SN Endist Far East

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 332312
Closed
Federal
Precision Cut Steel Square Pieces
Oregon State Office

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 332312
Closed
Federal
Pallet Rack System Equipment Supply
FA8604 Aflcmc Pzi

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 332312
Closed
Federal
Heavy-Duty Tubular Chassis Fabrication
FA5240 36 Cons Lgc

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 332312
Closed
Federal
ADA-Compliant Aluminum Dock and Gangway Supply
W074 Endist Wilmington

POSTED

about 2 months ago

CLOSED

20 days ago
View Details
NAICS: 332312
Closed
Federal
Metal Fabrication and Access Ladder Installation
FA3030 17 Cons Cc

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 332312
Closed
Federal
Shipboard Fabrication, Welding, and Mounting
Nswc Philadelphia Division

POSTED

about 2 months ago

CLOSED

30 days ago
View Details
NAICS: 332312
Closed
Federal
Structural Support Repair and Modification (NSN 1560-01-663-3473 H5)
Navsup Weapon Systems Support

POSTED

about 2 months ago

CLOSED

27 days ago
View Details
NAICS: 332312
Closed
Federal
VLS Deck and Hatch Component Fabrication
Commanding Officer

POSTED

about 2 months ago

CLOSED

27 days ago
View Details
NAICS: 332312
Awarded
Federal
96--TSC IIJA 8530 UNIVERSAL TEST FIXTURE
Solicitation # 140R4026Q0120
Upper Colorado Regional Office

POSTED

about 2 months ago

DEADLINE

N/A
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS