Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Department Of Homeland Security was posted on June 25, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Marine Non-Skid Coating Application

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290
New
Federal
Overhead Door (Modified COTS)
Solicitation # FA813226Q0051
The Air Force Sustainment Center's Maintenance Contracting Branch is seeking a Firm Fixed Price contract for one Modified Commercial Off-The-Shelf (COTS) motor-operated rolling overhead door for the Oklahoma City Air Logistics Complex at Tinker Air Force Base, Oklahoma. This procurement is a 100% Small Business Set-Aside under NAICS codes 238290 and 238990. The requirement is for delivery only, as the government will handle all installation. The door must be a direct replacement with a 24' x 23' 8" opening, featuring a 3 HP/460 Volt 3-phase opener, 20 GA steel curtain, and the ability to close automatically during fire events. Contractors are responsible for obtaining all necessary field measurements to ensure exact form, fit, and function. Attendance at a government-hosted site visit is mandatory to submit a quote. Following two amendments, the final offer due date is September 24, 2026, by 12:00 PM CDT. Award will be granted to the lowest-priced technically acceptable offeror, with the government evaluating the three lowest quotes for technical compliance based on the item description and site visit requirements. Shipping is FOB Destination, and payment terms are Net 30 via WAWF. All offerors must be registered in the System for Award Management (SAM) and provide a completed quote sheet including technical descriptions, warranty terms, and expected delivery timeframes.
FA8132 Afsc Pzimc

POSTED

2 days ago

DEADLINE

in 12 days
NAICS: 238290
New
Federal
J039--561A4-25-500 Elevator Upgrade & Modernization Repairs at VA NJ HCS Lyons Buildings 6 & 53
Solicitation # 36C24226R0097
Solicitation 36C24226R0097 is a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 238290 for the emergency upgrade and modernization of passenger and service elevators in Buildings 6 and 53 at the VA New Jersey Healthcare System Lyons Campus. The scope of work includes the installation of non-proprietary, microprocessor-based control systems, replacement of geared machines, and upgrading interior cabs to ensure compliance with the 2023 VA Elevator design manual and ADA requirements, including braille labeling. Key performance constraints mandate that no single elevator be shut down for more than 13 weeks and that the contractor provide 24/7 emergency answering services. The contract will be awarded to a responsible offeror based on a comparative evaluation of technical capability, past performance, and price. Technical requirements necessitate that the prime contractor be a licensed elevator maintenance company with a full-time mechanic on staff and a clean safety record, specifically no more than three serious, one repeat, or one willful OSHA or EPA violation in the last three years. Additionally, offerors must submit their current Experience Modification Rate on insurance carrier letterhead and provide certifications for the Buy American Act and limitations on subcontracting. Following several extensions to accommodate requests for information, the final proposal submission deadline is 1:00 PM on Friday, September 18, 2026.
242-NETWORK Contract Office 02 (36C242)

POSTED

2 days ago

DEADLINE

in 6 days

AI Contract Overview

Show more

The contract entails the complete removal of the existing non-skid coating from the main deck of USCGC Vigilant, followed by thorough surface preparation to meet SSPC-SP-10/NACE No. 2 standards, ensuring a pristine, profiled substrate for optimal adhesion. A new non-skid coating system compliant with MIL-PRF-24667C will be applied in strict accordance with environmental and ambient condition requirements, including controlled temperature, humidity, and ventilation to guarantee coating performance and longevity. All work must be executed under rigorous environmental controls to prevent contamination and ensure regulatory compliance during application. This subcontract is a Total Small Business Set-Aside under FAR 19.5, classified under NAICS code 238290 for other building completion contractors, and is managed by the SFLC Procurement Branch 1 under the Department of Homeland Security. The work must be performed at Cape Canaveral, Florida, with a response deadline of July 1, 2026, at 2:00 PM. The procurement is exclusively available to small businesses, emphasizing support for small business participation in federal marine maintenance contracts. No specific point of contact is listed, and all submissions must comply with the stated technical and regulatory requirements to be considered.

General Info

Remove old non-skid coating, apply MIL-PRF-24667C system at Cape Canaveral per SSPC-SP-10, small business set-aside.

Agency

Department Of Homeland Security → Sflc Procurement Branch 1(00080)View Agency

NAICS

238290 - Other Building Equipment ContractorsView NAICS

Place of Performance

Cape Canaveral, FL, 32920, USA

Set-Aside

SBA

Documents

This scope was carved out of 52000QR260025636.

The full solicitation package (8 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

5200QR260025636- CGC Vigilant Main Deck Preservation

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Sflc Procurement Branch 1(00080)
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Homeland Security → Sflc Procurement Branch 1(00080)
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Complete removal of existing non-skid coating, surface preparation to SSPC-SP-10/NACE No. 2 standards, and application of a new MIL-PRF-24667C-compliant non-skid coating system on the main deck of USCGC *Vigilant*. Includes environmental controls and compliance with strict ambient conditions.

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 1(00080)

Same awarding agency

NAICS: 333998
New
Federal
CGC RESOLUTE BRAND NAME DUPLEX STRAINERS
Solicitation # 52000QR260028133
The United States Coast Guard Surface Force Logistics Center is soliciting quotes for the procurement of two new 3-inch Bronze Duplex Flanged Strainers, model 72-44F-SS1, for the raw water feed of the starboard A/C skid on the CGC RESOLUTE. This is a total small business set-aside under NAICS 333998, to be awarded as a firm-fixed price contract using simplified acquisition procedures. The required equipment must be 100 percent new, featuring Monel baskets with 1/32 inch perforations and 316 marine-grade stainless steel hardware, with a strict prohibition on cadmium-plated hardware. Delivery is required FOB destination to Coast Guard Base Portsmouth, Virginia, no later than November 16, 2026. To be considered technically acceptable, offerors must provide a detailed cost breakdown, technical specification sheets, and a formal manufacturer statement certifying compliance with the Buy American Act, as the items must be manufactured in the United States. Required delivery documentation includes Material Test Reports or Certificates of Conformance for the Monel and stainless steel components, as well as certified factory test reports confirming the units were assembled and pressure tested to a maximum of 200 PSIG. Quotes must be submitted on company letterhead and include the vendor's UEI and CAGE code by September 18, 2026, at 10:00 A.M. Eastern Standard Time.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS