Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Solicitation opportunity from Department Of Defense was posted on June 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Building 5077 Garage Door Installation

Closed
FA301626Q0142Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290
New
Federal
Z1DA--Construction of Ogden Elevator Cab Interiors Jesse Brown Medical Center
Solicitation # 36C25226B0033_1
Solicitation 36C25226B0033 is a 100% set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) to perform interior upgrades for four elevators—P-7B, P-8B, P-9B, and freight S-10B—located in Building 11B of the Ogden Pavilion at the Jesse Brown VA Medical Center in Chicago, Illinois. The project objective is to match the design of elevator cab P-6B, which features ViviGraphix Graphica Cairo Slate Blue panels, diamond finish stainless steel ceilings with 3,200K LED downlights, and Nurazzo tile flooring. The scope includes the potential raising of elevator sills and doors to ensure flush tile installation. The project magnitude is estimated between $250,000 and $500,000, with a total performance period of 154 calendar days from the notice to proceed. Award will be granted to the responsible bidder providing the lowest priced responsive bid. Bidders must provide a bid guarantee of at least 20 percent of the bid price and submit current Experience Modification Rate (EMR) data and OSHA 300/300a forms. The contractor is required to adhere to the Davis-Bacon Act wage determinations for Cook County and maintain compliance with ASME A17.1 safety codes for elevators and escalators. Strict infection control measures are required per the ICRA renewal permit, and all construction debris must be removed daily. Key administrative requirements include the submission of daily contractor production reports (VA Form 10101) and the provision of performance and payment bonds upon award.
252-NETWORK Contract Office 12 (36C252)

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 238290
New
Federal
Overhead Door (Modified COTS)
Solicitation # FA813226Q0051
The Air Force Sustainment Center's Maintenance Contracting Branch is seeking a Firm Fixed Price contract for one Modified Commercial Off-The-Shelf (COTS) motor-operated rolling overhead door for the Oklahoma City Air Logistics Complex at Tinker Air Force Base, Oklahoma. This procurement is a 100% Small Business Set-Aside under NAICS codes 238290 and 238990. The requirement is for delivery only, as the government will handle all installation. The door must be a direct replacement with a 24' x 23' 8" opening, featuring a 3 HP/460 Volt 3-phase opener, 20 GA steel curtain, and the ability to close automatically during fire events. Contractors are responsible for obtaining all necessary field measurements to ensure exact form, fit, and function. Attendance at a government-hosted site visit is mandatory to submit a quote. Following two amendments, the final offer due date is September 24, 2026, by 12:00 PM CDT. Award will be granted to the lowest-priced technically acceptable offeror, with the government evaluating the three lowest quotes for technical compliance based on the item description and site visit requirements. Shipping is FOB Destination, and payment terms are Net 30 via WAWF. All offerors must be registered in the System for Award Management (SAM) and provide a completed quote sheet including technical descriptions, warranty terms, and expected delivery timeframes.
FA8132 Afsc Pzimc

POSTED

2 days ago

DEADLINE

in 12 days
NAICS: 238290
New
Federal
J039--561A4-25-500 Elevator Upgrade & Modernization Repairs at VA NJ HCS Lyons Buildings 6 & 53
Solicitation # 36C24226R0097
Solicitation 36C24226R0097 is a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 238290 for the emergency upgrade and modernization of passenger and service elevators in Buildings 6 and 53 at the VA New Jersey Healthcare System Lyons Campus. The scope of work includes the installation of non-proprietary, microprocessor-based control systems, replacement of geared machines, and upgrading interior cabs to ensure compliance with the 2023 VA Elevator design manual and ADA requirements, including braille labeling. Key performance constraints mandate that no single elevator be shut down for more than 13 weeks and that the contractor provide 24/7 emergency answering services. The contract will be awarded to a responsible offeror based on a comparative evaluation of technical capability, past performance, and price. Technical requirements necessitate that the prime contractor be a licensed elevator maintenance company with a full-time mechanic on staff and a clean safety record, specifically no more than three serious, one repeat, or one willful OSHA or EPA violation in the last three years. Additionally, offerors must submit their current Experience Modification Rate on insurance carrier letterhead and provide certifications for the Buy American Act and limitations on subcontracting. Following several extensions to accommodate requests for information, the final proposal submission deadline is 1:00 PM on Friday, September 18, 2026.
242-NETWORK Contract Office 02 (36C242)

POSTED

2 days ago

DEADLINE

in 6 days

AI Contract Overview

Show more

This contract is a 100% Small Business Set-Aside solicitation for the procurement, installation, and electrical integration of two 20 ft x 20 ft interior coil weathered service doors, specifically the Cornell Iron Works Model ESD10 or an approved equal, at Building 5077 on Joint Base San Antonio-Lackland, Texas. Each door must feature a 22-gauge galvanized steel curtain with a standard gray factory finish, an extruded mill-finish aluminum bottom bar with astragal, a lintel brush seal, single-guide weathering, motor operation with photo-eye safety sensors, and a 20 PSF wind load rating. The contractor is responsible for installing a dedicated 120-volt, 20-amp electrical circuit and disconnect switch for each motor, running conduit for control switches and motion sensors, and pulling all necessary control wiring. Completion of all work is required within 45 calendar days of contract award during normal duty hours, Monday through Friday, excluding federal holidays. A comprehensive three-year warranty covering both parts and labor is mandatory, and the contract is firm fixed price with award based on the Lowest Priced Technically Acceptable method. All offers must demonstrate technical acceptability by providing manufacturer documentation, part numbers, illustrations, warranty details, and a detailed delivery schedule meeting the 45-day performance period. The doors will be delivered and accepted at the installation site, with payment processed via Wide Area WorkFlow using the DoDAAC F87700, and invoicing must be submitted electronically through the WAWF system. Eligible vendors must be registered as a small business in SAM.gov and maintain current Entity IDs and CAGE codes. Site visits are scheduled for July 13, 2026, at 9:00 a.m. CDT, and access to the base requires a valid DoD ID or a previously approved Unescorted Access Request submitted no later than 10 days prior; failure to secure access is the offeror's responsibility. Questions regarding the solicitation must be submitted in writing via email no later than July 16, 2026, and responses will be posted publicly on SAM.gov. Proposals must be emailed to Joyce Yeboah and Thomas Farrell no later than July 27, 2026, at 12:00 p.m. CDT and must include a completed solicitation form, a capability statement verifying small business status

General Info

Small business set-aside for two 20x20 ft weathered service doors at JBSA Lackland with 3-year warranty and mandatory site visit.

Agency

Department Of Defense → FA3016 502 Cons ClView Agency

NAICS

238290 - Other Building Equipment ContractorsView NAICS

Place of Performance

San Antonio, TX, 78252, USA

Set-Aside

SBA

Documents

(4)

Attachment+2-+UAR+JBSA+LAK.pdf

PDF

FA301626Q0142 Building 5077 Garage Door Installation Q&A

XLSXq-and-a

Bldg 5077 Garage Door Installation Statement of Work

PDFsow

Solicitation FA301626Q0142 - Building 5077 Garage Door Installation

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA3016 502 Cons Cl
Contacts2 people available
OfficeJBSA LACKLAND, TX, 78236-5286, USA
Organization / Agency
Department Of Defense → FA3016 502 Cons Cl
View Agency Profile
Office AddressJBSA LACKLAND, TX, 78236-5286, USA

Full Description

Show more

This is a 100% Small Business Set-Aside RFQ for the procurement, installation, and electrical integration of two (2) 20’ x 20’ Cornell Iron Works Model ESD10 (or brand-name equivalent) interior coil weathered service doors at Building 2079, JBSA Lackland. The required door specifications include a 22-gauge galvanized steel curtain, standard gray factory finish, extruded mill-finish aluminum bottom bar with astragal, lintel brush seal, single-guide weathering, motor operation with photo-eye safety sensors, and a 20 PSF wind load rating. The contractor is responsible for installing a dedicated 120-Volt, 20-Amp circuit to each motor, setting and hardwiring a disconnect at each motor, piping conduit for the control switches and motion sensors, and pulling all necessary control wiring. Additionally, a comprehensive 3-year warranty on both parts and labor is required for this project.


Interested vendors shall respond to this Solicitation IAW the attached documents and instructions to offerors.


Site Visit will be held at 09:00 am CDT on Monday 13 July 2026, at 1875 Arizona St, Lackland Air Force Base, TX 78236.


JBSA-Lackland requires a valid Base Pass and Identification to enter. Anyone who does not have the necessary identification to enter the base must send an email (NLT 10 days prior to site visit) to both CS and CO (see POC above) requesting DoD SAFE Drop to submit an Unescorted Access Request(UAR JBSA LAK ) (Attachment 2). It is your responsibility to confirm that the base access request has been received by 502 CONS. For additional information, please contact the CS and CO.


Refer to each attachment for additional details and Addendum to RFO 52.212-1 Instructions to Offerors— Commercial Products and Commercial Services, for specific Proposal Preparation and Format Instructions.


All questions must be submitted in writing through email no later than 16 July 2026 at 12:00 p.m CDT.


Responses to questions will be posted by the Government on the SAM.gov, contracting opportunities website as received. Questions submitted after this date/time will not be considered. Please respond to this RFQ by emailing your response to: Joyce Yeboah at joyce.yeboah.gh@us.af.mil and Thomas Farrell at Thomas.Farrell.5@us.af.mil, no later than 12:00pm CDT, 27 July 2026 in order to be considered timely.

More opportunities from Department Of Defense → FA3016 502 Cons Cl

Same awarding agency

NAICS: 332999
New
Federal
Provide and Install Brand Name Sheetmaster 100 Roll-Out Shelf Storage System
Solicitation # FA301626Q0287
Solicitation FA301626Q0287 is a combined synopsis and request for quote for the procurement and installation of one brand name Sheetmaster 100 Roll-Out Shelf Storage System, manufactured by Rack Engineering Division, for Hangar 5 at Joint Base San Antonio Randolph, Texas. The project requires the delivery, professional assembly, and structural anchoring of a blue, all-welded steel system to a concrete floor slab. Technical specifications include a load capacity of 5,500 lbs per shelf, a standard height of 84 inches, and an automatic locking system that secures shelves at 100 percent open or closed. The contractor must also perform a dry-run test to demonstrate full shelf extension and provide all necessary operations manuals and warranty paperwork. This is a 100 percent Small Business Set-Aside under NAICS code 332999. The government will award a single firm-fixed-price purchase order based on the lowest price technically acceptable (LPTA) evaluation. To be deemed technically acceptable, offerors must provide product literature and a detailed technical capability narrative substantiating their ability to complete the delivery, installation, and testing. Quotes are due by September 18, 2026, at 2:00 PM CDT. It is noted that funds are not presently available, and the government reserves the right to cancel the request. Payment will be processed electronically through the Wide Area WorkFlow system, and items must comply with MIL-STD-130 and MIL-STD-129 for unique item identification and shipment labeling.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 721110
New
Federal
Commercial Lodging for the 433rd Airlift Wing
Solicitation # FA301626Q0138
Solicitation FA301626Q0138 is a request for a firm-fixed-price Blanket Purchase Agreement (BPA) to provide commercial lodging services for the 433rd Airlift Wing at Joint Base San Antonio (JBSA) Lackland. This acquisition is a total set-aside for small business concerns under NAICS code 721110, with a master limit of 1,269,000 dollars over a five-year period of performance. The contractor must provide safe, clean, and compliant accommodations for personnel in various duty statuses, including Unit Training Assemblies and Active Duty. Requirements include a maximum capacity of 50 double and 25 single occupancy rooms per UTA, daily maid service, and strict adherence to AFOSH 91-001, ADA compliance, and the FEMA National Master List for fire safety. The award will be granted to the Highest Technically Rated Offeror with a Fair and Reasonable Price (HTRO-FRP) through a three-step evaluation process. First, only the five lowest-priced quotes advance to technical evaluation. Second, offerors must pass four mandatory gates: FEMA listing, a 15-mile driving radius from JBSA-Lackland or Fort Sam Houston, JTR per diem rate compliance, and a successful physical site inspection. Third, eligible quotes are scored on proximity to the installation, room block guarantees, and amenities such as in-room kitchenettes and complimentary hot breakfast. Payment is handled via Government Purchase Card for calls under 25,000 dollars and through the Wide Area Workflow (WAWF) module for calls exceeding that amount, with consolidated monthly invoices due by the 10th of each month. Submissions must be divided into two distinct volumes: a price submission and a technical submission. Any pricing information included in the technical volume will result in the quote being deemed non-responsive.
Hotels (except Casino Hotels) and Motels

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334111
New
Federal
Palo Alto Firewall Appliances & Licenses
Solicitation # FA301626Q0262
Solicitation FA301626Q0262 is a request for quotation for the procurement of brand-name Palo Alto Networks PA-440 firewall appliances and proprietary security subscription licenses to replace end-of-life Cisco equipment at the Medical Education and Training Campus (METC) in Building 1374 at JBSA Fort Sam Houston, Texas. The requirement is a 100 percent small business set-aside under NAICS 334111. The government intends to award one five-year firm-fixed-price purchase order, spanning approximately September 30, 2026, through September 29, 2031. Key deliverables include two PA-440 appliances and one-year subscriptions for Advanced URL Filtering, WildFire, Threat Prevention, DNS Security, and Premium Support, with four additional option years for subscription licenses. Amendment 1 added CLIN 007 for installation labor and testing and extended the quote submission deadline to September 16, 2026. The government will evaluate quotes using the Lowest Price Technically Acceptable (LPTA) criteria, where technical quotations are assessed on a pass/fail basis based on meeting salient characteristics. No reconditioned or used parts are acceptable. While the government intends to award based on initial submissions, it reserves the right to conduct interchanges with quoters if deemed necessary. The contractor is responsible for providing all management, tools, labor, and materials for installation and testing. Payment shall be processed through Wide Area Workflow (WAWF). Security requirements include obtaining base identification and vehicle passes for personnel performing work at the installation.
Electronic Computer Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 238220
New
Federal
Bldg 3820 Chiller Diagnostic and VFD Services
Solicitation # FA301626Q0271
Solicitation FA301626Q0271 is a requirement for comprehensive diagnostic troubleshooting and repair services for a Trane Chiller system located at Building 3820, JBSA Fort Sam Houston. The primary objective is to isolate and resolve operational issues with the Variable Frequency Drive (VFD) to restore the system to 100 percent operational capability in accordance with manufacturer standards. This procurement is set aside for Women-Owned Small Businesses under NAICS 238220. The scope of work includes up to 17 hours of diagnostic labor within a three-day service window, with a performance period scheduled from September 30, 2026, to October 30, 2026. Key deliverables include the execution of electrical, control, and mechanical diagnostics, the submission of a detailed diagnostic report to the CE 502d Project Manager, and the immediate replacement of the VFD if found defective using brand new OEM parts. The contractor must provide a one-year workmanship guarantee and pass through all original manufacturer warranties to the government. Strict adherence to safety protocols is required, including OSHA 29 CFR 1910.147 for Lockout/Tagout, NFPA 70E for arc flash safety, and EPA Section 608 certification for technicians handling refrigerants. Final acceptance requires performance testing under load witnessed by JBSA representatives to verify full operational capability.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 337127
New
Federal
BMET Work Center Furniture Package-Workbenches and Installation
Solicitation # FA301626Q0276
Solicitation FA301626Q0276 is a firm-fixed-price request for quotation issued by the 502d Contracting Squadron at JBSA-Randolph for the turn-key delivery, assembly, and installation of a Biomedical Equipment Technician (BMET) Work Center Furniture Package at the Port San Antonio Consolidated Storage and Deployment Center in Texas. This requirement is 100% set aside for small businesses under NAICS 337127 and is conducted on a brand-name or equal basis, specifically referencing Lista/Vidmar products. The scope of work includes the procurement and installation of L-shaped technician and admin workbenches, straight ESD workbenches, various storage cabinets, and specialized seating. All ESD-safe components must meet ANSI/ESD S20.20 and EOS/ESD S4.1 standards. The contractor is also responsible for electrical hookups, ESD grounding, and adhering to DoD item unique identification and marking standards per MIL-STD-130 and MIL-STD-129. The government will utilize a Best Value Tradeoff source selection methodology to award the contract. Technical capability is evaluated on a pass/fail basis, while the delivery and installation schedule, past performance, and price serve as tradeoff factors. Non-price factors are considered significantly more important than price in the final determination. All items must be delivered and installed by September 30, 2026. Offerors are required to submit a four-part electronic proposal covering technical capability, delivery schedules, past performance, and pricing. Invoicing and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system.
Institutional Furniture Manufacturing

POSTED

2 days ago

DEADLINE

in 2 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS