Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Marine Propeller Inspection and Quality Testing

Active

Response Deadline12/14/2026, 09:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the Department of the Navy through DLA Mechanicsburg, involves the technical inspection and quality testing of manufactured marine propellers for prime contractors. The scope of work requires performing dimensional and structural inspections according to NAVSEA Drawing 245-5110169 and verifying surface finishes per ASME B46.1. These tasks must be executed using coordinate measuring machines and other precision measurement tools while maintaining strict compliance with FED-STD-H28 and NAVSEA S9074 standards. The selected provider is responsible for delivering certified inspection reports via DD Form 1423 as part of CDRL A001. The performance of these services will take place in Mechanicsburg, Pennsylvania. This opportunity is designated as an SBA set-aside under NAICS code 541380, with a response deadline set for December 14, 2026.

General Info

Navy subcontract for marine propeller technical inspection and quality testing in Mechanicsburg, Pennsylvania.

Agency

Department Of The Navy → SPRMM1 DLA Mechanicsburg

NAICS

541380 - Testing Laboratories and Services

Place of Performance

MECHANICSBURG, PA, 17055-0788, USA

Set-Aside

SBA

Documents

This scope was carved out of SPRMM126QHF70.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PROPELLER,MARINE — 2010016076494 — SPRMM126QHF70

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineDec 14

Submission deadline

Response Deadline

12/14/2026, 09:30:00 PM UTCin about 2 months

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → SPRMM1 DLA Mechanicsburg

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → SPRMM1 DLA Mechanicsburg

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs technical inspection and testing of manufactured marine propellers for prime contractors on DLA supply contracts. Conducts dimensional and structural inspection per NAVSEA Drawing 245-5110169 and surface finish verification per ASME B46.1 using CMM and precision measurement tools. Complies with FED-STD-H28 and NAVSEA S9074 standards. Delivers certified inspection reports via DD Form 1423 (CDRL A001).

Similar Contracts

Same NAICS industry code

Third-Party Inspection and Certification

JACKSONVILLE BLDG

POSTED

about 2 hours ago

DEADLINE

Specialized Testing Laboratory (First Article Test)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense through the DDSP New Cumberland Facility. The selected contractor will perform quality conformance inspection and testing for prime contractors delivering DLA supply contracts, specifically focusing on one prototype unit. Using laboratory equipment, the contractor must verify material specifications, durability, and pressure in strict accordance with MIL-H-24580. The scope of work requires the delivery of a comprehensive test report and one validated First Article unit, with all test results provided to the Engineering Support Activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

First Article Testing and Inspection ServicesThis subcontract for First Article Testing and Inspection Services involves providing specialized validation for prime contractors supporting Defense Logistics Agency supply contracts. The selected provider will use high-precision metrology equipment, such as optical comparators or CMM, to verify that the dimensions and tolerances of a first-article sample for NSN 5305-01-470-6044 align with required technical data. To qualify, the contractor must maintain an inspection system compliant with ISO 9001 or SAE AS9003 standards. The final deliverables for this engagement include the tested first article unit and a completed FAT certification report. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 541380.

Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

Electrical Testing and Certification LaboratoryThis subcontract opportunity is for an Electrical Testing and Certification Laboratory to provide independent verification and testing of cable assemblies for prime contractors supporting DLA Weapons Support ASC projects. The scope of work involves conducting Product Verification Testing, which includes electrical continuity, voltage withstand, and physical dimension checks. All sampling and inspections must be performed using calibrated measurement tools in accordance with MIL-STD-1916 or ASQ H1331 standards, culminating in the delivery of formal test reports and certifications of compliance. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Third-Party Quality Conformance Inspection

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

Production Lot Testing and Quality ReportingThis subcontract for Production Lot Testing and Quality Reporting supports the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized production lot testing and inspections for prime contractors, utilizing pressure testing and leak detection systems. All work must adhere to zero-based sampling plans, specifically MIL-STD-1916, and culminate in the delivery of certified test results and detailed Production Lot Test reports. The project is based in San Diego, California, and falls under NAICS code 541380. Due to the nature of the sensitive data involved, the contractor is required to maintain CMMC Level 2 certification. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

First Article Testing (FAT) and Thread Gaging ServicesThis subcontract opportunity is for the provision of independent laboratory testing and certification services to support prime contractors on DLA Weapons Support ASC projects. The scope of work focuses on conducting First Article Testing and thread gaging for Class 3A and 3B threads to ensure strict compliance with SAE AS8879 Category 1 or MIL-S-7742 standards. The successful provider must deliver a certified First Article Test Report and maintain professional accreditation through either ISO/IEC 17025 or AS9100. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The place of performance is located at Robins Air Force Base. Interested parties must submit their responses by November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

HazMat Identification and SDS DocumentationThis subcontract opportunity with the Department of Defense at the DDSP New Cumberland Facility involves providing hazardous material identification and documentation services for prime contractors on DLA Troop Support projects. The selected provider will be responsible for identifying hazardous materials in accordance with Federal Standard No. 313 and preparing Safety Data Sheets that comply with 29 CFR 1910.1200(g). Additionally, the contractor must provide hazard warning labels as required by DFARS 252.223-7001 and deliver all completed SDS and HazMat identification lists. The project falls under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

Production Lot Test (PLT) and Quality CertificationThis subcontract for the Department of Defense, specifically DLA DIST San Joaquin, involves providing specialized testing and quality assurance validation for prime contractors on DLA supply contracts. The scope of work focuses on executing Production Lot Test requirements in accordance with MIL-STD-1916 or ASQ H1331, Table 1, which includes assigning verification levels for critical, major, and minor attributes. The selected provider must possess JCP Certification to access technical data and maintain the necessary laboratory equipment for gas filter validation. Key deliverables for this engagement include the submission of PLT reports, material certifications, and detailed inspection sheets. The performance of these services will take place in Tracy, California. Interested parties should note the response deadline of November 9, 2026, for this opportunity categorized under NAICS code 541380.

DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

More opportunities from Department Of The Navy → SPRMM1 DLA Mechanicsburg

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military-grade packaging for prime contractors under DLA Mechanicsburg supply contracts. The scope of work requires the packaging of precision instruments in accordance with MIL-STD-2073-1 and the application of container markings per MIL-STD-129. To ensure compliance, the contractor must utilize MIL-SPEC crates, cushioning, and moisture barriers, and must hold official certification in Department of Defense packaging standards. The project entails the individual packaging and master-packing of 12 units for final shipment to TAC2. Performance will take place in Mechanicsburg, Pennsylvania, under the oversight of the Department of the Navy. Interested parties must adhere to the response deadline of November 27, 2026.

Motor Vehicle Towing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Fluxmeter Hardware Supply (NSN 6625-01-514-3574)This subcontract involves the supply of 12 FLUXMETER units (NSN 6625-01-514-3574) for prime contractors supporting DLA Mechanicsburg. The selected provider must be the original equipment manufacturer or an authorized distributor capable of manufacturing items according to Technical Data Package Version 008. All units must undergo physical identification per MIL-STD-130, requiring the use of specific IUID marking equipment. The contractor is required to maintain NIST SP 800-171 cybersecurity compliance to ensure data security. Final delivery consists of 12 finished units accompanied by a Material Inspection and Receiving Report. The performance of this contract is centered in Mechanicsburg, Pennsylvania, under the oversight of the Department of the Navy.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Specialized Electronic Component SupplyThis subcontract through the Department of the Navy, managed by DLA Mechanicsburg, involves the supply of military-grade electronic components, semiconductors, and capacitors. These materials are intended for prime contractors working on NAVSUP Weapons Systems Support radar projects. All parts must be sourced according to TDP Version 007 and delivered as either individual components or complete kits. To maintain strict quality and security standards, the provider must supply Certificates of Conformance and documented chain of custody from the original manufacturer to guarantee total traceability. The contract is categorized under NAICS code 423610, with the place of performance located in Mechanicsburg, Pennsylvania.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

Circuit Card Assembly (CCA) Fabrication and AssemblyThis subcontract involves the fabrication and assembly of Circuit Card Assemblies for the MD-1286/SPN-43C Radar Modulator, supporting NAVSUP Weapons Systems Support radar projects for the Department of the Navy. The contractor is responsible for fabricating PCBs and assembling electronic components in strict accordance with TDP Version 007. The project requires the delivery of three completed assemblies, emphasizing rigorous quality control through 100% material traceability and UID markings as mandated by DFARS 252.211-7003. Performance will take place in Mechanicsburg, Pennsylvania, under NAICS code 334418, with all final deliveries requiring comprehensive traceability documentation.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 15 hours ago

DEADLINE

Manufacture and Supply of LED Illuminator (Red)This subcontract, managed by the Department of the Navy via DLA Mechanicsburg, involves the manufacture and supply of one Red LED Illuminator for the USS MESA VERDE (LPD 19) under NAVSUP WSS projects. The contractor is required to produce the unit according to design specifications CAGE Code 1VR65 and reference 78081-NX-2, ensuring the delivery of NSN 5855-01-689-5755. The scope of work includes rigorous quality assurance inspections, full supply chain traceability, and CDAP compliance. All items must be packaged in accordance with MIL-STD-2073 and delivered with all necessary documentation. The project falls under NAICS code 335999, with performance based in Mechanicsburg.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

Certified Material Supply for D.E.R.M.This subcontract, titled Certified Material Supply for D.E.R.M., is issued by the Department of the Navy through the DLA Mechanicsburg agency. The contractor is responsible for supplying raw metals, polymers, or composites to prime contractors on DLA supply contracts, ensuring all materials adhere to the specific grades and standards outlined in TDP Version 001. Performance will take place in Mechanicsburg, Pennsylvania, under NAICS code 331110. Critical requirements for this contract include the provision of full supply chain traceability, supported by mill test reports and certificates of conformance. Additionally, the supplier must strictly comply with the Counterfeit Detection and Avoidance Program guidelines to ensure the integrity of all certified raw materials delivered. The response deadline for this opportunity is November 12, 2026.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 15 hours ago

DEADLINE

IUID Marking and Data RegistrationThis subcontract, titled IUID Marking and Data Registration, is issued by the Department of the Navy under the SPRMM1 DLA Mechanicsburg agency. The contractor is responsible for performing unique item identification marking for prime contractors on DLA supply contracts, specifically utilizing two-dimensional data matrix symbology in accordance with ISO/IEC 16022. The scope of work includes the delivery of marked parts and the submission of identifier data reports via the IUID Registry or Wide Area WorkFlow. To ensure compliance, the contractor must utilize laser marking or etching equipment that meets ISO/IEC 16022, 15434, and ANSI MH 10.8 standards. The performance of these services will take place in Mechanicsburg, Pennsylvania. Interested parties should note the response deadline of November 12, 2026, and the associated NAICS code 339943.

Marking Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

D.E.R.M. Component FabricationThis subcontract for D.E.R.M. Component Fabrication involves the manufacture of physical components for prime contractors under DLA supply contracts. The selected provider must fabricate parts in strict accordance with TDP Version 001 and DODISS standards, utilizing equipment that meets all specified TDP tolerances. To ensure quality and authenticity, the contractor is required to comply with Counterfeit Detection and Avoidance Program guidelines and perform all necessary inspections and tests to substantiate conformity. The scope of work includes maintaining comprehensive supply chain traceability through the use of batch IDs, date codes, and serial numbers for all delivered components. Managed by the Department of the Navy via SPRMM1 DLA Mechanicsburg, the performance of this contract will take place in Mechanicsburg, Pennsylvania. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.

POSTED

about 15 hours ago

DEADLINE

Power Distribution Unit (PDU) SupplierThis subcontract, issued by the Department of the Navy via DLA Mechanicsburg, requires the supply of one Power Distribution Unit intended for prime contractors on Department of Defense contracts. The hardware must strictly adhere to NSN 6120-01-699-9371 and Part Number 91417 PG-PDU-30AC-24DC-R1. To ensure operational readiness and regulatory adherence, the unit must be packaged according to MIL-STD-2073 and maintain full compliance with the Trade Agreements Act. The procurement falls under NAICS code 335999, with the final packaged unit to be delivered to the government destination in Mechanicsburg. Interested parties should note the response deadline of November 27, 2026, for this specific hardware requirement.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors on DLA Mechanicsburg projects for the Department of the Navy. The scope of work involves providing specialized packaging and packing services for electronic components, ensuring strict adherence to MIL-STD-2073 and ASTM D3951-18 standards. To maintain component integrity, the provider must utilize anti-static, moisture-barrier, or shock-absorbent materials to deliver shipment-ready and properly labeled products. The performance of these services takes place in Mechanicsburg, Pennsylvania, with final delivery of the packaged components handled via F.O.B. Origin to Manassas, Virginia. This opportunity falls under NAICS code 488510 and was posted on October 28, 2026, with a response deadline of November 27, 2026.

Freight Transportation Arrangement

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Manufacture of Electronic Component (NIIN 016746980)This subcontract involves the manufacture of a specific electronic component, NIIN 016746980, for the Department of the Navy via DLA Mechanicsburg. The contractor is responsible for the fabrication and assembly of one physically marked and inspected unit in strict accordance with reference design A0091563. Compliance with MIL-STD-130, REV N for part marking and a strict zero-mercury policy for use in surface ships and submarines is mandatory. The project falls under NAICS code 334419 and requires adherence to DFARS 252.204-7012 cybersecurity standards. Performance will take place in Mechanicsburg, Pennsylvania. Interested parties must respond by the deadline of November 27, 2026.

Other Electronic Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Crating for Marine HardwareThis subcontract, titled MIL-SPEC Packaging and Crating for Marine Hardware, involves providing specialized packaging and preservation services for heavy marine propellers intended for DLA supply contracts. The contractor is responsible for packaging eight propellers using heavy-duty crates and marine-grade materials in strict accordance with MIL-DTL-2845 and MIL-STD-2073. Additionally, the scope of work includes applying UID labels and shipping marks per MIL-STD-130 and MIL-STD-129 to ensure the hardware is ready for FOB Origin shipment to DLA Distribution centers. Managed by the Department of the Navy through DLA Mechanicsburg, this SBA set-aside opportunity falls under NAICS code 339999. The place of performance is located in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by the deadline of December 14, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 2 months

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS