Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Marine Scuttle Unit Manufacturing and Assembly

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the fabrication and assembly of three marine scuttle units designed to meet stringent Department of Defense standards, including MIL-STD-129 for packaging and marking and DLA RP001 for compliance with logistical and identification requirements. These units must be manufactured to precise specifications outlined by the Defense Logistics Agency to ensure operational readiness and uniformity across military supply chains. The work is to be performed in San Diego, California, with a deadline for responses set for August 3, 2026, and the solicitation was posted on July 23, 2026. This subcontract falls under NAICS code 336612, indicating it involves the manufacture of marine propulsion equipment and related components. All units must be fully compliant with DLA standards for documentation, labeling, and packaging to facilitate seamless integration into defense logistics networks.

General Info

Fabricate three DLA-compliant marine scuttle units in San Diego by August 3, 2026, per MIL-STD-129 and DLA RP001.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

336612 - Boat BuildingView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabrication and assembly of three marine scuttle units compliant with DLA standards, MIL-STD-129, and DLA RP001 for packaging and marking.

Similar Contracts

Same NAICS industry code

Manufacture and Supply of Watercraft Floor PanelsThe contract requires the fabrication, testing, packaging, and delivery of two specialized floor panels designed for watercraft, adhering strictly to military specifications and applicable environmental standards. All work must be completed and the panels delivered to Camp Lejeune, North Carolina, within a tight 20-day window following award, ensuring timely operational readiness. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to compete. The North American Industry Classification System code 336612 categorizes the work within the Ship and Boat Building and Repair sector, aligning the requirements with specialized maritime manufacturing capabilities. The contracting activity falls under the Fluid Handling Division of the Department of Defense, with the place of performance clearly designated to the military installation at Camp Lejeune, where the panels will be integrated into watercraft systems. The response deadline is August 6, 2026, with the solicitation posted in July 2026, providing potential bidders a two-week window to prepare and submit their proposals.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Locomotive Windshields (F40PH-3 & MP36PH-3 Models)Metra is seeking suppliers to manufacture and deliver OEM-compliant or approved equal windshields for its F40PH-3 and MP36PH-3 locomotive models, with all products required to meet specified technical and quality standards. The contract is structured as a subcontract and is open for bid through BonfireHub, with responses due by July 29, 2026. The work falls under NAICS code 336612, which classifies it within the railroad rolling stock manufacturing sector. Performance of the contract is expected to support Metra’s operations in Illinois, though the specific location of delivery or installation is not detailed. The solicitation was posted on July 24, 2026, and no set-aside preferences or organizational restrictions are indicated, meaning any qualified vendor may submit a proposal without limitation based on business size, ownership, or certification.

POSTED

DEADLINE

18' Aluminum Flat-Bottom Center Console Mud Boat ManufacturingA custom 18-foot aluminum flat-bottom center console mud boat is to be fabricated using .125-gauge 5086 marine-grade aluminum, designed for operation in shallow, muddy environments. The vessel must include USCG-compliant flotation systems, proper lighting, and electrical systems built to ABYC standards, ensuring safety and reliability in demanding conditions. The boat must be fully integrated with a 40HP surface drive outboard motor and come equipped with a matching trailer for transport and deployment. All components must be seamlessly engineered for performance, durability, and regulatory compliance, with no partial or incomplete deliverables accepted. The contract is issued under the NAICS code 336612 for boat building and is categorized as a subcontract under the Texas Parks and Wildlife Department. The solicitation was posted on July 24, 2026, with a firm deadline for responses on August 7, 2026, at 8:00 PM. Interested parties must submit complete proposals addressing all technical, safety, and integration requirements by the stated deadline, ensuring full compliance with specifications and delivery readiness. The project is to be performed without specified geographic limitations, but all materials and systems must meet the operational and regulatory demands of Texas wildlife and waterway environments.

Parks and Wildlife Department

POSTED

DEADLINE

18ft Center Console Mud Boat PackageTexas Parks and Wildlife Department is soliciting bids for a complete mud boat package consisting of an eighteen-foot aluminum flat bottom center console boat, a forty-horsepower surface drive outboard motor, and a matching aluminum boat trailer, all specifically engineered for shallow water operations amid light vegetation. The equipment must meet or exceed technical specifications outlined in the solicitation dated July 2026 to ensure durability, performance, and safety in demanding aquatic environments across Texas. The solicitation, identified as 802-27-75102-CR, was posted on July 24, 2026, with responses due by August 7, 2026, and is open to eligible vendors under a state and local government procurement program. Point of contact for inquiries is Synthia De Hoyos, reachable via phone or email, and all performance of the contract will occur within the state of Texas.

Parks and Wildlife Department

POSTED

DEADLINE

17' Aluminum Flat Bottom Center Console Mud Boat SupplyThe contract calls for the supply of three new 17-foot aluminum flat bottom center console mud boats built with .125-gauge 5086 marine-grade aluminum, ensuring durability and corrosion resistance in demanding aquatic environments. Each vessel features a self-bailing hull to enhance safety and operational efficiency in shallow, muddy waters, and is equipped with T-rail compatible cleats for secure vessel attachments and TPWD-approved tie-downs and lighting systems to meet state regulatory standards. These boats are intended for use in state-managed waterways and will support enforcement, conservation, and wildlife management missions. The solicitation is open as a subcontract under NAICS code 336612, with a response deadline of August 7, 2026, and is issued by the Texas Parks and Wildlife Department. Interested parties must submit proposals through the Texas SmartBuy portal by the specified deadline to be considered for award.

Parks and Wildlife Department

POSTED

DEADLINE

17ft Center Console Mud Boat PackagesTexas Parks and Wildlife Department is soliciting bids for three 17-foot aluminum flat bottom center console mud boat packages specifically engineered for operation in shallow waters with light vegetation. The boats and accompanying motors must meet or exceed detailed specifications outlined in the solicitation dated July 2026, ensuring durability and performance in demanding environmental conditions. The procurement is open to qualified vendors responding to solicitation number 802-27-75102-BR, with proposals due by August 7, 2026, at 8:00 PM CT. The department, operating under the SLED classification, is procuring these vessels for use throughout Texas, with performance expected to occur within the state. All inquiries and submissions should be directed to Synthia De Hoyos, the primary point of contact, via email at Synthia.DeHoyos@tpwd.texas.gov or phone at 512-389-4510. The solicitation is published on the Texas SmartBuy portal for reference and submission.

Parks and Wildlife Department

POSTED

DEADLINE

Supply of 17ft Aluminum Flat-Bottom Tiller Mud BoatsThe contract entails the manufacture or supply of four 17-foot aluminum flat-bottom tiller-operated mud boats designed for operation in shallow-water wetland and coastal environments, with strict adherence to Texas Parks and Wildlife Department specifications ensuring durability, performance, and environmental suitability. These vessels are purpose-built for accessing fragile ecosystems with minimal impact, featuring robust aluminum construction, flat bottoms for navigating mud and shallow waters, and tiller steering for precise maneuverability in tight or obstacle-heavy conditions. The solicitation is classified as a subcontract under NAICS code 336612, with a response deadline of August 7, 2026, and was posted on July 24, 2026. Performance will be conducted under the oversight of the Texas Parks and Wildlife Department, though specific delivery or installation locations are not detailed. The contract is accessible via the Texas SmartBuy portal, indicating it is part of a state procurement process intended to equip agency operations with specialized vessels for resource management, wildlife monitoring, and conservation activities in ecologically sensitive areas.

Parks and Wildlife Department

POSTED

DEADLINE

17ft Tiller Mud Boat PackagesThe Texas Parks and Wildlife Department is soliciting bids for four 17-foot aluminum flat bottom tiller mud boat packages designed for shallow water operations with light vegetation, with all specifications requiring compliance as of July 2026. Each package must include the boat and motor, engineered to perform reliably in demanding, low-depth aquatic environments typical of Texas wildlife management areas. The solicitation, identified as 802-27-75102-AR, was posted on July 24, 2026, and responses are due by August 7, 2026, at 8:00 PM Central Time. The contract falls under state-level procurement with no specific set-aside classification and is intended for performance within Texas. Synthia De Hoyos of the department serves as the primary point of contact, reachable via email at Synthia.DeHoyos@tpwd.texas.gov or by phone at 512-389-4510, and all submissions must be made through the Texas SmartBuy portal linked in the posting.

Parks and Wildlife Department

POSTED

DEADLINE

CONNECTOR,THRU-HULLThis contract pertains to the procurement of a thru-hull connector assembly designated as SPECIAL EMPHASIS MATERIAL (Level I), critical to the safe operation of shipboard systems where failure could result in catastrophic loss of life, vessel, or mission. The item must comply with specification CPG 1025 and associated drawings, with strict requirements for material composition, welding, inspections, and traceability. All critical components—including the penetrator body, cover, nut, and washers—must be manufactured from QQ-N-286 or QQ-N-281 material with full quantitative chemical and mechanical certification, and each lot must be traceable via unique heat or lot numbers permanently marked on the part or an attached durable tag. Welding procedures and qualifications must be submitted for pre-approval prior to any production or repair welding, and all welds must conform to S9074-AQ-GIB-010/248 or 0900-LP-001-7000. Material certifications must be submitted electronically via WAWF to Portsmouth Naval Shipyard (N50286) for review and acceptance prior to shipment, with no material permitted to leave the contractor’s facility without formal acceptance. The contractor is required to maintain a documented quality system compliant with ISO-9001 and ISO-10012 or MIL-I-45208 and MIL-STD-45662, subject to government source inspection by DCMA. First Article Testing of one unit must be conducted at Portsmouth Naval Shipyard under government supervision, and all non-destructive and destructive tests, including ultrasonic inspection, dye penetrant testing, and hardness verification, must be performed per specified standards and documented with full traceability to the tested component. Electronic signatures on certifications are permitted but must be controlled, uniquely attributed, and tamper-evident. No molybdenum disulfide lubricants are allowed; only A-A-59004 anti-galling compound may be used on threads. The contract mandates 100% inspection of certification data and traceability markings, zero-defect acceptance criteria, and full compliance with Buy American and Small Business Subcontracting requirements. Delivery of all materials is due no later than 365 days after contract award, with certification data for weld procedures and material testing due 20 days prior to each shipment. This solicitation is issued under Emergency Acquisition Flexibilities and carries a “DO”

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

UNION ASSEMBLYThis contract governs the supply of a specialized 0.500 IPS Socketweld Union Assembly designated as SPECIAL EMPHASIS material (Level I/SUBSAFE), critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The material must strictly conform to Drawing 845-2445110 and referenced specifications including QQ-N-281, MIL-C-15726, and MIL-C-24679, with mandatory quantitative chemical and mechanical certification for specific components. All items require full traceability from raw material through final assembly, with unique heat-lot markings permanently applied and verifiable against certified test reports. Certification documentation must be submitted via WAWF to Portsmouth Naval Shipyard under DODAAC N50286, with inspection and acceptance handled by N39040, and shipments are prohibited until formal acceptance is received. Welding, brazing, and non-destructive testing procedures must be pre-approved, with detailed qualification data submitted electronically, and filler metals require certificates verifying composition and compliance. The contractor must maintain an ISO-9001 compliant quality system with ISO-10012 and ISO/IEC 17025 calibration controls, subject to government quality assurance at source, including unannounced audits and inspections by DCMA. All subcontractors are bound by the same stringent requirements, and material handling, storage, and transport must prevent commingling, contamination, or loss of traceability. Mercury and molybdenum disulfide are prohibited, while anti-galling compound A-A-59004 is mandated for threads. Final acceptance requires 100% verification of traceability, certifications, and test results, with zero-tolerance defects for lot acceptance. The contract is issued under Emergency Acquisition Flexibilities and is a DO-rated order under DPAS, prioritized for national defense use. All waivers, deviations, and engineering changes require explicit Government approval, and full compliance with NAVSEA and Navy quality directives is mandatory. The delivery window is capped at 365 days post-contract effective date, with certification data submissions due at least 20 days before each delivery.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Pedal Boat Manufacturing – Animal-Themed Recreational WatercraftThe contract involves the manufacture of five-person animal-themed pedal boats designed for recreational use on water, with specifications requiring marine-grade fiberglass construction, UV-resistant gel coat finishes, non-skid surfaces for safety, and self-draining hulls to ensure durability and ease of maintenance. Each vessel must be equipped with either a foot-pedal or hand-crank propulsion system to accommodate varying user preferences and accessibility needs, blending functionality with playful, thematic designs. The work falls under NAICS code 336612, indicating classification within the manufacturing of other recreational vehicles, and is structured as a subcontract opportunity issued by the City of Raleigh under the North Carolina state framework. The solicitation was posted on July 24, 2026, with a firm deadline for responses on August 20, 2026, at 7:00 PM Eastern Time. While no set-aside provisions or specific agency contact details are provided, the project underscores a municipal initiative to enhance public recreational offerings with innovative, durable, and user-friendly watercraft. The absence of a defined place of performance suggests flexibility in manufacturing location, though adherence to the technical specifications and delivery standards will be critical for compliance. Interested parties must ensure their proposals meet all engineering, safety, and aesthetic requirements outlined in the solicitation to be considered for award.

City of Raleigh

POSTED

DEADLINE

Supply of Boat Covers (NSN: 2040016513137)The contract requires the supply and delivery of six units of a specified boat cover identified by NSN 2040016513137, with all items must comply with military packaging and marking standards outlined in MIL-STD-129. The delivery deadline is January 19, 2027, and the place of performance is DDSP New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026. This is classified as a subcontract under the NAICS code 336612, which pertains to boat building. The contracting agency is the Fluid Handling Division within the Department of Defense, and the procurement is managed through the DLA Dibbs system with the reference number SPE7M426T281A.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Data Unavailable

POSTED

DEADLINE

Hydraulic Cylinder Block SupplyThe contract requires the manufacture, labeling, packaging, and delivery of nine hydraulic cylinder blocks to a Department of Defense depot located at Hill Air Force Base with ZIP code 84056-5734. All work must strictly adhere to military specifications and hazardous materials handling standards to ensure compliance with federal safety and operational requirements. The scope encompasses full production responsibility from initial fabrication through final packaging and shipment, with no tolerance for deviation from mandated protocols. The solicitation, issued under NAICS code 332994, is structured as a subcontract and remains open for responses until August 6, 2026, with postings dated July 26, 2026. Performance must be executed in alignment with the Fluid Handling Division’s expectations, though specific point of contact details are not provided in the data.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Sea Transportation to Naval Vessel (FPO AP 96668)The contract requires the secure and compliant sea transportation of goods to the USNS IMPECCABLE at FPO AP 96668, adhering strictly to DFARS 252.247-7023 and all applicable military logistics protocols. This subcontract is part of the Department of Defense’s logistical framework under the Fluid Handling Division, ensuring that delivery meets stringent defense supply chain standards for maritime operations. The place of performance is designated as FPO with zip code 96668, indicating a military postal address associated with a naval vessel operating in the Pacific region. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, and is classified under NAICS code 488390 for other support activities for water transportation. The transaction is formally structured as a subcontract and does not include a set-aside designation, meaning it is open to all eligible contractors regardless of business size or status. All transport operations must align with U.S. military requirements for handling sensitive cargo, ensuring confidentiality, timeliness, and chain-of-custody integrity throughout the journey to the designated naval vessel.

Other Support Activities for Water Transportation

POSTED

DEADLINE

Military-Compliant Packaging and Marking ServicesThe contract requires comprehensive packaging, preservation, and labeling services in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards for military shipments. This includes the application of barcoding and precise container marking to ensure traceability, readiness, and uniformity across defense logistics operations. All work must adhere to federal military specifications for durability, environmental protection, and identification, ensuring that materials are safely preserved and properly identified throughout transit and storage. The contract is structured as a subcontract under the NAICS code 561910 and is issued by the Fluid Handling Division of the Department of Defense. The place of performance is designated as FPO with a ZIP code of 96668, indicating operations will support overseas or military postal locations. Proposals must be submitted by August 6, 2026, following the posting date of July 26, 2026, with no specific set-aside provisions indicated. This procurement is critical to maintaining standardization and operational readiness across military supply chains.

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the provision of hazard communication labeling and safety data sheet (SDS) preparation for all hazardous components contained within the supplied items, ensuring full compliance with regulatory standards. This includes the submission of labeling documentation prior to award if the product is not exempt under FIFRA or the FDCA, necessitating thorough assessment of chemical composition and regulatory applicability. All deliverables must align with global harmonization standards to support safe handling, storage, and disposal of hazardous materials throughout the supply chain. The solicitation is issued under the NAICS code 541690 for other scientific and technical consulting services by the FLUID HANDLING DIVISION of the Department of Defense, with a performance location in FPO, ZIP 96668. The contract is classified as a subcontract and is open for response until August 6, 2026. Interested parties must submit proposals by the deadline, with no set-aside provisions indicated, and all requirements must be met to ensure regulatory compliance and operational readiness across DoD supply operations.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Supply of Stopper Assembly, Chain (NSN 2040013785116)The contract entails the manufacture and delivery of two military-spec stopper assembly chains, identified by NSN 2040013785116, to be produced in full compliance with MIL-STD-129 and MIL-STD-2073-1E packaging and marking standards. These components are designated for shipment to a naval vessel afloat, with the place of performance listed as FPO, ZIP 96668, indicating delivery to a U.S. Navy vessel at sea. The work is classified as a subcontract under NAICS code 332439, which pertains to other fabricated metal product manufacturing, and the solicitation was posted on July 26, 2026, with responses due by August 6, 2026. The contract is administered by the Fluid Handling Division within the Department of Defense, and all deliverables must meet stringent military specifications ensuring durability, traceability, and readiness for operational environments aboard ship.

Other Metal Container Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance & CMMC AssessmentThe contract requires full compliance with DFARS 252.204-7012 to ensure the protection of covered defense information and mandates support for a third-party assessment to achieve CMMC Level 2 certification. This effort is focused on implementing robust cybersecurity controls aligned with the CMMC framework to safeguard sensitive information handled within the defense supply chain. The work is to be performed at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is structured as a subcontract under a total small business set-aside, meaning only small business concerns are eligible to respond. The North American Industry Classification System code is 541611, indicating the work falls under management, scientific, and technical consulting services with an emphasis on cybersecurity advisory and implementation. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026, with the contracting activity originating from the Department of Defense’s Fluid Handling Division.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Military Shipment Marking & LabelingThis contract requires the application of MIL-STD-129 compliant markings on military shipments, including the use of Special Marking Code 32, hazard labels in accordance with DFARS 252.223-7001, and 2D Data Matrix barcodes to ensure proper identification and handling. All labeling must meet stringent Department of Defense standards for visibility, durability, and data accuracy to support logistics and safety protocols across the supply chain. The work is to be performed at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is classified as a subcontract under a total small business set-aside, meaning only businesses certified as small by the SBA are eligible to bid. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, and is managed by the Fluid Handling Division of the Department of Defense under NAICS code 811212, which pertains to industrial and military equipment repair and maintenance services.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Military Packaging & Preservation ServicesThe contract requires the packaging of hose assemblies in strict compliance with MIL-STD-2073-1E, incorporating Air Evacuation preservation techniques and maintaining CLNG/DRY:1 environmental controls to ensure long-term integrity and readiness of the components. This work must be performed under a Total Small Business Set-Aside as defined by the SBA, limiting eligibility to small business concerns, and is classified under NAICS code 493190 for other pipeline and related services. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract is issued under the Department of Defense’s Fluid Handling Division. Bidders must submit proposals by the deadline of August 6, 2026, and the opportunity was posted on July 26, 2026, with the exact terms and requirements accessible via the provided DIBBS link.

Other Warehousing and Storage

POSTED

DEADLINE

Nonmetallic Hose Assembly ManufacturingThe contract requires the manufacture of 40 units of nonmetallic hose assemblies adhering strictly to Navy specification 6122903 Rev G, with all units must operate within a pressure range of 0 to 125 PSI and withstand a mandatory pressure test of 500 PSI to ensure structural integrity and performance under extreme conditions. The work is classified as a subcontract under a Total Small Business Set-Aside as defined by the SBA, meaning only small business entities are eligible to bid, and it falls under NAICS code 332999 for other fabricated metal product manufacturing. The solicitation was posted on July 26, 2026, with proposals due by August 6, 2026, and the performance location is designated as New Cumberland, Pennsylvania, with zip code 17070-5002. The contracting activity originates from the Fluid Handling Division under the Department of Defense, and bidders must comply with all technical, quality, and delivery requirements outlined in the Navy specification without deviation.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Small Business Subcontracting and Socioeconomic Compliance SupportThe contract supports a prime contractor in fulfilling U.S. Department of Defense small business participation goals and complying with subcontracting reporting obligations under the NAICS code 541611, which covers management consulting services. The effort is focused on ensuring accurate tracking, documentation, and reporting of small business subcontracting activities to meet federal requirements and maintain compliance with socioeconomic programs. This includes assisting with data collection, monitoring subcontractor performance, and preparing necessary submissions to official government systems. Performance is required at the location in Norfolk, Virginia, with a response deadline of August 6, 2026, and the solicitation was posted on July 26, 2026. The contract is classified as a subcontract and is managed under the Fluid Handling Division of the Department of Defense. The work is intended to enhance the prime contractor’s ability to achieve and sustain mandated small business utilization targets while avoiding penalties or compliance risks associated with reporting inaccuracies or failures. No set-aside classification is specified, indicating this opportunity is open to all qualified offerors regardless of business size or socioeconomic status.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE