Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Subcontract opportunity from Virginia was posted on November 6, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Marine Vessel Line Shaft Bearing Maintenance and Replacement

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336612
New
Federal
CONNECTOR,THRU-HULL
Solicitation # N0010426QFG24
This fixed-price solicitation from NAVSUP Weapon Systems Support Mechanicsburg is for the procurement of Thru-Hull Connectors, designated as Special Emphasis Level I material due to its critical role in shipboard systems. The contract requires strict adherence to quality standards, including First Article Testing and specific pressure test tolerances. Key deliverables include the submission of weld procedures and qualification data within 120 days of award, with final material delivery expected within 365 days of the contract's effective date. The procurement involves rigorous inspection criteria, where lot acceptance is based on zero defects, and requires the use of the Wide Area Workflow (WAWF) system for all invoicing and receiving reports. The award will be made to the responsible offeror determined to be most advantageous to the Government, with past performance weighted as more important than price. Technical requirements mandate compliance with various military and federal standards, including MIL-STD-2073 for packaging and specific welding standards such as S9074-AR-GIB-010A/278. While the solicitation was initially a small business set-aside, it has been amended to an unrestricted status. All certification data and CDRLs must be submitted to the Portsmouth Naval Shipyard for review and acceptance prior to shipment.
Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in 21 days
NAICS: 336612
New
Federal
ANTENNA ASSEMBLY,HO
Solicitation # N0010425QFE37
This contract involves the procurement of a crucial antenna horn assembly intended for use in a vital shipboard system, emphasizing the highest standards of quality and safety. The material must conform to specific drawings and specifications, including Kollmorgen drawings and MIL standards, with rigorous certification requirements for chemical, mechanical, and non-destructive testing. The contract mandates strict traceability of materials, including unique identification markings and detailed certification reports to ensure compliance with military and safety standards. It also requires comprehensive inspection, testing, and certification procedures, including weld qualification, thread inspection, and adherence to environmental restrictions such as mercury-free materials. The scope includes detailed requirements for configuration control, waiver and deviation processes, and quality system compliance aligned with ISO-9001 standards, with the government maintaining oversight through source inspection and evaluation of the contractor’s quality assurance measures. Delivery is scheduled within 365 days of contract award, with specific milestones for certification data submission and final delivery, and the contract is designated as a "DX" rated order under the Defense Priorities and Allocations System, highlighting its importance for national defense. The solicitation is posted by NAVSUP Weapon Systems Support in Mechanicsburg, PA, with a response deadline of July 8, 2025, and provides contact details for further inquiries.
Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in 14 days
NAICS: 336612
New
Federal
20--HOUSING ASSEMBLY, IN REPAIR/MODIFICATION OF
Solicitation # N0010423QFE98
This contract involves the procurement of three housing assemblies (NSN 7H-2040-012897927-L1, TDP VER 002) to be delivered to Portsmouth Naval Shipyard in Kittery, Maine. The items are classified as Level 1, indicating they are critical components that will be acquired exclusively from approved sources, with the government holding rights to the complete technical data package, which is verified as complete and unrestricted. The contract emphasizes that the parts are candidates for full and open competition, though the acquisition is set aside entirely for small business concerns, with specific set-aside clauses to be applied as per the solicitation. Suppliers must demonstrate compliance with inspection standards (MIL-I-45208A or equivalent) certified through a joint survey team, and all offers should include their Cage Code. The procurement process involves referencing military and federal standards, with access to relevant documents available through the DOD Single Stock Point or ASSIST-Online. The solicitation, posted by the Department of the Navy’s Naval Supply Systems Support, indicates that award will depend on meeting qualification requirements at the time of award, and interested parties are encouraged to respond within the specified deadline. The contract aims to support maintenance and repair activities within the naval fleet, ensuring the supply of approved, qualified housing assemblies for critical shipboard applications.
Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in 21 days
NAICS: 336612
New
Federal
PROPELLER,MARINE
Solicitation # SPRMM126QHF70
Solicitation SPRMM1-26-Q-HF70, issued by NAVSUP Weapons Systems Support and the Defense Logistics Agency, is a total small business set-aside for the manufacture, inspection, testing, and packaging of eight Left Hand (LH) LCU 1600 Class Marine Propellers (NSN 2010-01-607-6494). The contractor is required to adhere to the latest revision of NAVSEA Drawing 245-5110169 and various technical standards, including ISO 9000, ASME Y14.5M 2009, and MIL-STD-2035 Rev A. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) criteria. Deliveries are split between DLA Distribution facilities in New Cumberland, Pennsylvania, and Tracy, California, with shipping terms established as F.O.B. Origin. The contractor is responsible for providing all necessary equipment for production and must maintain a government-approved inspection system. Key deliverables include the hardware and four specific reports via DD Form 1423: an inspection and test report (CDRL A001), departure from specification requests (CDRL A002), a quality system and testing procedure plan (CDRL A003), and a material certification report (CDRL A004). Packaging must comply with MIL-STD-2073 and MIL-DTL-2845, with specific requirements for barrier materials and marking per MIL-STD-129. Administrative requirements include electronic invoicing through the Wide Area Workflow (WAWF) system and compliance with Buy American and cybersecurity regulations.
SPRMM1 DLA Mechanicsburg

POSTED

about 4 hours ago

DEADLINE

in 24 days

AI Contract Overview

Show more

The Virginia Department of Transportation is seeking a subcontractor for the Marine Vessel Line Shaft Bearing Maintenance and Replacement project. This contract focuses on the essential upkeep of ferry vessels, specifically requiring the inspection, cleaning, maintenance, and replacement of line shaft bearings. Key technical requirements include performing precise alignment verification and ensuring proper lubrication to maintain vessel operational efficiency. The solicitation was posted on November 6, 2025, with a response deadline of December 8, 2025. Classified under NAICS code 336612, this opportunity is managed by the state of Virginia and is open to qualified vendors capable of performing specialized marine mechanical services.

General Info

Virginia DOT seeks subcontractors for ferry line shaft bearing maintenance and replacement services.

Place of Performance

VA, USA

Set-Aside

NONE

Documents

This scope was carved out of 160248.

The full solicitation package (30 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

IFB 160248 Pocahontas 2025 Slip Maintenance

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • Physical Material Supply (Steel, Pipe, Fasteners)Open now, due in 7 days
  • Supply of Light Dome AssembliesOpen now, due in 6 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyVirginia Department of Transportation
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Inspection, cleaning, maintenance, and replacement of line shaft bearings on ferry vessels, including alignment verification and lubrication.

More opportunities from Virginia Department of Transportation

Same awarding agency

NAICS: 327332
New
SLED
IFB 161345 - Concrete Pipe
Solicitation # 161345
The Virginia Department of Transportation is soliciting bids from qualified firms to furnish and deliver various sizes of concrete pipe to locations within Brunswick, Lunenburg, and Mecklenburg counties. This Invitation for Bids (IFB 161345) requires delivery on an FOB Destination basis, with a delivery timeline of 14 calendar days following the issuance of a purchase order. Deliveries must occur during normal working hours from Monday through Friday, 7:30 am to 3:30 pm, and the agency must be notified at least 24 hours in advance. Minimum orders are set at $2,000, though contractors may charge a transportation fee for orders below this threshold. Awards will be made based on the grand total. The contract includes a provision for the Commonwealth to renew the agreement for four successive one-year periods, with notice provided 90 days before expiration. Bidders must submit all proposals electronically via eVA by the December 1, 2026, deadline, with a virtual public bid opening scheduled for 11:00 AM EST on that date. Key compliance requirements include maintaining a drug-free workplace, adhering to non-discrimination and sexual harassment policies, and certifying that the vendor is not currently debarred by the Commonwealth of Virginia. Payment is processed monthly via check, ACH, EDI, or P-Card within 30 days of invoice receipt. There is no specified set-aside status for this solicitation.
Concrete Pipe Manufacturing

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 237310
New
SLED
IFB 161206 Equipment with operator - Bridge
Solicitation # 161206
The Virginia Department of Transportation is seeking qualified firms to provide on-call, as-needed hourly rental of equipment with experienced operators for bridge maintenance and urgent repair work within the Bristol District, specifically serving Wythe and Grayson Counties. The scope of work includes ordinary maintenance, maintenance replacement projects, incidental construction, and miscellaneous concrete or general repairs. The contractor is responsible for providing all necessary labor, fuel, transportation, tools, supervision, and traffic control, including certified flaggers. The contract period runs from the date of award through January 3, 2028, with the possibility of four successive one-year renewals. Award is based on the lowest ultimate cost to the Department, provided the bidder is responsive and qualified. Bidders must submit several mandatory documents via the eVA portal, including a Virginia State Corporation Commission form, a Vendor Qualification/Equipment Inventory Certification, and a Small Business Subcontracting Plan if not already DSBSD-certified. VDOT will verify owned equipment through in-person evaluations and leased equipment via signed rental agreements prior to awarding the contract. Personnel must meet strict qualification standards, including VDOT Work Zone training, OSHA certifications for confined space and fall protection, and DEQ certification for erosion and sediment control. Payment is issued on an hourly basis to the nearest quarter hour, with a specific immediate response fee of $1,500 for calls answered within six hours.
Highway, Street, and Bridge Construction

POSTED

3 days ago

DEADLINE

in 10 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Get AI-powered intelligence on the opportunities still open

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 900+ contractors already using CLEATUS