Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MASK, AIRWAY, LARYNGE

Active
SPE2DS-26-T-236RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a disposable laryngeal airway mask, identified by part number 128010 and NSN 6515-01-543-3537, supplied by LMA NORTH AMERICA, INC. DBA 1GXY2. Each unit must be packaged in a sealed container that protects against damage and shipped in commercial exterior containers suitable for safe delivery via common carrier at the lowest cost to the destination. Packaging and marking must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and each container must be clearly marked with the lot number and date of manufacture prefixed by “MFD”. The product has a mandated 30-month shelf life, with no more than five months allowed to have elapsed from the date of manufacture to delivery. The item is regulated by the FDA, requiring referral through EBS for confirmation before procurement. The unit of issue is PG (1 PG equals 10 units), and delivery is required within 20 days FOB destination with zero variance allowed in quantity. Packaging must conform to MIL-STD-2073-1E, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements under applicable revision dates tied to the solicitation timeline. The contract was issued under solicitation SPE2DS-26-T-236R with a response deadline in July 2026.

General Info

Procure 10-unit packs of FDA-regulated laryngeal airway mask, 30-month shelf life, FOB destination, 20-day delivery.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339112 - Surgical and Medical Instrument ManufacturingView NAICS

Place of Performance

USNS MERCY T AH 19, FPO, AP, 96672-4090, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-236R.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
JAMES BURKE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MASK,AIRWAY,LARYNGE
MASK, AIRWAY, LARYNGEAL, DISPOSABLE, UNIQUE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
PLUS SIZE 1, 10S
.
U/I PACKAGE (PG)
.
SHALL HAVE A SHELF LIFE OF 30 MONTHS.
NOT MORE THAN 5 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
SPE2DS-26-T-236R
SECTION B
MARKINGS ON ALL CONTAINERS SHALL INCLUDE THE LOT
(CONTROL) NUMBER AND DATE OF MANUFACTURE PREFIXED
BY "MFD".
.
1 PG = 10 EA
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.
. RS019: Shelf-life requirement RS001 for a TYPE I (CODE P) item with a shelf life of 30 months (non-extendable) applies to this item.
LMA NORTH AMERICA, INC. DBA 1GXY2 P/N 128010
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017496603 0001 PG 1.000
NSN/MATERIAL:6515015433537
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
SPECIAL NSN/Part Number: 6515-01-543-3537 Quantity: 1 PG Purchase Request: 7017496603QTY: 1 Delivery: 20 days ADO

Similar Contracts

NAICS: 339112
New
DIBBS
BAG, RECLOSABLEThe contract specifies the procurement of white block reclosable polybags measuring 3.0 inches by 4.0 inches with a 2-mil thickness, made from 100 percent virgin polyethylene and featuring high clarity with a white labeling area on the front. Each package contains 1,000 bags, and the unit of issue is one package. All packaging and packing must comply with commercial standards as outlined in the procurement document, with each unit required to be sealed in a suitable container that protects against damage or breakage. Shipments must be packed in commercial exterior containers appropriate for safe delivery via common carrier at the lowest cost to the designated delivery point at Fort Wainwright, Alaska. The materials must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must provide the source and part number being supplied. The NSN is 6515-01-500-5746, with a delivery deadline of 20 days after order placement, and the solicitation number is SPE2DS-26-T-236E, issued under the Department of Defense’s Medical Supply Chain organization. Technical and quality requirements referenced in the contract are governed by the DLA Master List, effective as of the solicitation or award date depending on acquisition type, and covered defense information may apply.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
DELIVERY KIT, OBSTETRICThe Delivery Kit, Obstetrical is a disposable medical kit designed for normal deliveries in emergency and ambulance settings, containing essential supplies including one pair of gloves, one drape sheet, two umbilical cord clamps, two OB towelettes, one disposable scalpel, one OB pad, one receiving blanket, six gauze sponges, one bulb syringe, four disposable towels, two nylon tie-offs, two alcohol preps, two twist ties, and one plastic bag. Each kit must be sealed in a unit container that protects its contents from damage and packaged in commercial shipping containers suitable for safe delivery via common carrier at the lowest possible rate to the specified delivery point. All items must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and must be clearly labeled with the manufacturer’s date, expiration or retest date, and contract or lot number in accordance with MMS1A guidelines. The kits must have a minimum 24-month shelf life, with no more than three months elapsed between the manufacturer’s date and delivery to the government. The unit of issue is each, and the NSN is 6515-01-343-2145, with a requirement for two units to be delivered within five days of award under solicitation SPE2DS-26-T-236A. Bidders must provide the source and part number, and all supplies must adhere to DLA’s technical and quality requirements as defined in the DLA Master List, including packaging standards and the removal of government identification from non-accepted items. The point of delivery is JBER, Alaska, with procurement managed by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
PROBE, TEMPERATURE MONIThe contract specifies the procurement of two single-use adult temperature monitoring probes designed for esophageal or rectal use, with YSI technology, under NSN 6515-01-728-2899. Each probe must have a minimum shelf life of 36 months, and no more than seven months may have elapsed from the date of manufacture to the date of delivery to the government. Labels must clearly display the manufacturer’s name and CAGE code, the date of manufacture, expiration or retest date, and the contract or lot number. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition type. Packaging must meet DLA standards, and non-accepted supplies must have all government identification removed. The procurement is part of Solicitation SPE2DS-26-T-236B, issued by the Department of Defense’s Medical Supply Chain, with a delivery deadline of 20 days after award, and the point of contact is Ryan Kane at DLA.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
PAD MAGNETIC NEEDLEThe contract specifies the procurement of 64-count sterile, disposable magnetic needle pads, product part number 70512, manufactured by Xodus Medical, Inc. and distributed under Cardinal Healthcare’s catalog as 70512. Each unit is packaged as one “PG” (package) and must meet strict commercial packaging standards as defined in DLA Packaging Requirements for Procurement, ensuring complete protection against damage or breakage in sealed unit containers and suitable exterior shipping containers compliant with export requirements when applicable. All items must be marked in accordance with Medical Marking Standard No. 1, superseding MIL-STD-129, and are designated as MEDSEP, meaning no substitutions are permitted. The product is regulated by the FDA and classified as a Fleet Prime Vendor item under the Department of Defense’s procurement system. Delivery is required FOB destination within 84 days with zero variance permitted in quantity, and inspection and acceptance occur at the delivery point. The NSN is 6515011535294, and the contract references SPE2DS-26-T-236K. Packaging must conform to MIL-STD-2073-1E, and the delivery address is APO with zip code 09227-0000. The solicitation was posted on July 15, 2026, with responses due by July 21, 2026, and technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, effective as of the solicitation issue date.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
ADMINISTRATION SET,The contract specifies the procurement of 46 units of a disposable, sterile intravenous administration set with coiled tubing measuring 96 inches in length and featuring two injection sites, designed for use with intravenous fluids and equipped with a needleless system. The device delivers 10 drops per milliliter and is classified as a low unit-of-measure item, with each unit issued individually. The product must have a minimum shelf life of 36 months, and no more than five months may have elapsed from the date of manufacture to the date of delivery to the government. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA requirements, and any non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being offered. The item is identified by NSN 6515-01-562-6724, under solicitation SPE2DS-26-T-235J, with a response deadline of July 21, 2026, and delivery required within 20 days of award to Fort Bragg, North Carolina, 28310. The contracting agency is the Department of Defense, Medical Supply Chain MD Surg FSF, and inquiries should be directed to Patrick Esposito.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details