Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Material Testing and Non-Destructive Inspection (NDI)

Active

Response Deadline10/30/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Material Testing and Non-Destructive Inspection is issued by the Department of the Navy under the Navsup Weapon Systems Support Mech agency. The project requires the performance of quantitative chemical and mechanical analysis, as well as ultrasonic inspections, to support prime contractors on Navy projects. Key technical requirements include material composition verification and the detection of internal flaws using equipment that meets strict military standards, specifically adhering to MIL-STD-2132 and T9074-AS-GIB-010/271. The scope of work culminates in the delivery of certified test reports and inspection certificates. This opportunity is designated as an SBA set-aside under NAICS code 541380, with the place of performance located in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by the deadline of October 30, 2026.

General Info

Navy subcontract for material testing and inspection in Pennsylvania, due October 30, 2026.

Agency

Department Of The Navy → Navsup Weapon Systems Support Mech

NAICS

541380 - Testing Laboratories and Services

Place of Performance

MECHANICSBURG, PA, 17050-2411, USA

Set-Aside

SBA

Documents

This scope was carved out of N0010426QFB59.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STEM,FLUID VALVE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 08:30:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs quantitative chemical/mechanical analysis and ultrasonic inspection for prime contractors on Navy projects. Conducts material composition verification and ultrasonic testing to detect internal flaws using equipment meeting military standards. Adheres to T9074–AS-GIB–010/271 and MIL-STD–2132. Delivers certified test reports and inspection certificates.

Similar Contracts

Same NAICS industry code

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation (MTC) is seeking quotes for a fee-for-service subcontracting opportunity to provide comprehensive asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material (ACM) floor tiles in the Warehouse, Warehouse Storage Area, and Gymnasium. Specifically, the project may require the removal and disposal of approximately 2,000 square feet in the warehouse, 1,600 square feet in the storage area, and 600 square feet in the gymnasium. All work must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Interested offerors must submit a completed bid sheet, a supplier packet containing a W-9 and self-certification form, proof of insurance, and three references for projects of similar scope by October 21, 2026. Award selection will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards and Department of Labor wage determinations for Grundy, Kendall, and Will counties. Selected contractors must adhere to strict records management, privacy breach notification, and information security requirements. Invoicing is to be submitted on a weekly or bi-weekly basis and must include a purchase order number and detailed pricing breakdowns. This opportunity is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone certified firms.

Joliet Job Corps

POSTED

about 4 hours ago

DEADLINE

Solicitation # 49187

The Municipality of Anchorage is seeking bids for ITB 2026B077 to provide hydrostatic testing services at the Don Young Port of Alaska for the period spanning 2026 through 2030. This solicitation is categorized under NAICS code 541380 and requires a formal response by October 20, 2026, at 5:00 PM. A critical requirement for eligibility is attendance at the mandatory site visit held on September 29, 2026, at 1871 Anchorage Port Road. Bidders who do not attend this visit will be ineligible for the award. All inquiries regarding the invitation to bid must have been submitted in writing to the designated email address by September 30, 2026.

Municipality of Anchorage

POSTED

about 9 hours ago

DEADLINE

Refrigerant and Lubrication Analysis

DGS: CAPSD - Procurement

POSTED

about 17 hours ago

DEADLINE

First Article Testing for Air Duct Hose

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

First Article Testing for Block Clamps

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

Production Lot Testing for Inflatable Life Rafts

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

Third-Party Quality Inspection and Sampling

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

First Article Test (FAT) Execution

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

Product Verification Testing (PVT) Services

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in about 1 month

First Article Test (FAT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

First Article Testing (FAT) for Shear Bolts

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of The Navy → Navsup Weapon Systems Support Mech

Same awarding agency

Supply of Critical Safety Item (CSI) Socket Head Cap ScrewsThis subcontract involves the supply of high-strength, certified socket head cap screws, identified by NIIN 016330288, for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The contractor is responsible for manufacturing or sourcing these critical safety items in strict accordance with TDP Version 002, ensuring full material traceability and the implementation of Special Emphasis Level I Scope of Certification. Compliance requirements include adherence to FAR 52.246-11 and mandatory registration in the ECDS system using a PKI Digital Certificate. All certified screws and accompanying Level I quality certifications must be delivered to the Portsmouth Naval Shipyard. The contract is managed under NAICS code 332722 with performance associated with the Mechanicsburg location.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Repair and Certification of External JA FittingsThis subcontract, titled Repair and Certification of External JA Fittings, is issued by the Department of the Navy under the Navsup Weapon Systems Support Mech agency. The project focuses on the repair and restoration of external JA fittings for prime contractors on US Navy projects, with performance taking place in Mechanicsburg. The scope of work involves the teardown, evaluation, and inspection of items to restore them to like new or A condition in strict accordance with restricted-access technical drawings. The contractor is responsible for utilizing precision machining and inspection tools to conduct Beyond Economic Repair and Beyond Repair analysis. The final deliverables for this contract include either certified repaired fittings or formal determinations that the items are beyond repair or beyond economic repair. The work is categorized under NAICS code 811210.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Supply of External JA Fittings (NIIN 014154757)This subcontract, managed by the Navsup Weapon Systems Support Mech for the Department of the Navy, involves the procurement of external JA fittings under NIIN 014154757. The selected provider is responsible for manufacturing or sourcing these fittings in strict accordance with restricted-access drawings and QPL 24403 standards. To ensure mission readiness and safety, all delivered hardware must achieve Quality Assured status and meet Special Emphasis Level I certification. The contract requires that all components be obtained through QPL-approved sourcing to maintain rigorous quality control. Performance for this requirement is centered in Mechanicsburg, Pennsylvania, with the primary objective being the delivery of physical hardware fittings to prime contractors supporting US Navy procurement projects.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Fluid Filter Head Manufacturer/SupplierThis subcontract involves the manufacture and supply of specialized Fluid Filter Heads, identified by NSN 4330-01-421-2626, for prime contractors supporting US Navy shipboard system projects. The Department of the Navy, specifically through Navsup Weapon Systems Support Mech in Mechanicsburg, requires the parts to be produced according to Special Emphasis material Level I Scope Of Certification. Key technical requirements include IUID marking in accordance with MIL-STD-130 and strict compliance with CSI standards and FAR 52.246-11. Each delivered filter head must be accompanied by a Special Emphasis Certificate of Conformance to verify that all quality and material specifications have been met.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Hydrostatic and Non-Destructive Testing ServicesThis subcontract for Hydrostatic and Non-Destructive Testing Services supports prime contractors on Navsup Weapon Systems Support Mech projects for the Department of the Navy. The scope of work involves performing mandatory safety and integrity testing on assemblies and welds, specifically utilizing hydrostatic pressure tests and non-destructive testing methods such as X-ray, ultrasonic, or dye penetrant equipment in accordance with Drawing 7491389. The service provider is responsible for generating and delivering signed test certifications and NDT reports, with submissions processed via Wide Area Workflow. Performance of these services is centered in Mechanicsburg, Pennsylvania, under NAICS code 541380.

Testing Laboratories and Services

POSTED

DEADLINE

Certified Pressure Vessel Welding/BrazingThis subcontract for Certified Pressure Vessel Welding/Brazing supports Navsup Weapon Systems Support Mech projects for the Department of the Navy. The scope of work involves performing production and repair welding or brazing on piping and pressure vessel assemblies for prime contractors. All work must be executed using naval-standard equipment to deliver high-quality welded and brazed assembly components. Performance will take place in Mechanicsburg, Pennsylvania. To be eligible, personnel must hold specific qualifications under S9074-A-GIB-010/A278 and 0900-LP-001-7000. The project is categorized under NAICS code 332994.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

ASTM-B21 Alloy C46400 Material SupplyThis subcontract involves the procurement and supply of certified ASTM-B21 Alloy C46400 raw material intended for the production of stuffing box plugs. The materials are destined for prime contractors working on projects for the Department of the Navy under the Navsup Weapon Systems Support Mech agency. A critical requirement of the contract is the provision of full material traceability and certifications that strictly adhere to ASTM-B21 specifications. The performance of this contract is centered in Mechanicsburg, Pennsylvania, and falls under NAICS code 336992. The primary objective is the delivery of certified stock that meets all technical standards to ensure the integrity of the weapon systems components being manufactured.

Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

DEADLINE

Stuffing Box Assembly FabricationThis subcontract for the Department of the Navy involves the fabrication of the Left Training Handle Stuffing Box Assembly for Navsup Weapon Systems Support Mech projects. The scope of work includes precision CNC machining of assembly components and the cutting of all internal threads using non-cold forming methods, culminating in the final assembly and delivery of the product. To qualify, the contractor must maintain ISO-9001 certification and possess precision CNC machining centers. All deliverables must strictly adhere to MIL-STD-2073 and MIL-STD-129 standards for marking and preservation. The performance of this contract is centered in Mechanicsburg, Pennsylvania, under NAICS code 332710.

POSTED

DEADLINE

Production Lot Destructive TestingThis SBA set-aside subcontract, titled Production Lot Destructive Testing, is issued by the Department of the Navy through the Navsup Weapon Systems Support Mech. The project involves performing critical destructive testing for prime contractors on US Navy shipboard system projects, specifically focusing on Production Lot Tests as outlined in CLIN 0004AC. The selected provider will utilize tensile and hardness testers to validate the mechanical properties of Special Emphasis material, ensuring all safety and strength specifications are met. To qualify for this engagement, the contractor must maintain ISO/IEC 17025 laboratory accreditation to provide the government-mandated validation required for these systems. The primary deliverables include detailed destructive test results and comprehensive reports. The work is categorized under NAICS code 541380 and is to be performed in Mechanicsburg, Pennsylvania.

Testing Laboratories and Services

POSTED

DEADLINE

High-Strength Socket Head Cap Screw Supply (CSI/Special Emphasis)This subcontract, issued by the Department of the Navy's Navsup Weapon Systems Support Mech, involves the supply of high-strength specialized socket head cap screws for prime contractors working on US Navy shipboard system projects. The contractor is responsible for manufacturing or sourcing screws according to CAGE 53711 drawings for specific NIINs 013255214, 013989864, 014214736, and 016409810. Performance takes place in Mechanicsburg, Pennsylvania, under NAICS code 332722, with the opportunity set aside for SBA participants. Strict quality and documentation standards are required for this engagement, including Special Emphasis Level I or Quality Assured certification. The contractor must provide full traceability and Material Certification Test Reports in accordance with DI-MISC-81020. Final deliverables consist of the specified screws, the required test reports, and a Certificate of Compliance to ensure all naval specifications are met.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Supply of Special Emphasis Tie Rods (NIIN 015404502)This subcontract, managed by the Navsup Weapon Systems Support Mech for the Department of the Navy, involves the precision manufacture and supply of Tie Rods (NSN 2530-01-540-4502) for US Navy shipboard system projects. The contractor is responsible for producing the rods according to TDP Version No. 001, adhering to strict Special Emphasis Level I quality assurance requirements. Performance takes place in Mechanicsburg, Pennsylvania, under NAICS code 332722. The scope of work includes rigorous inspections per DI-MISC-81020 and packaging in accordance with MIL-STD 2073. To ensure full compliance and traceability, the contractor must provide a Certificate of Compliance per CDRL DI-MISC-80678 along with all necessary traceability documentation upon delivery of the physical components.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Specialized Material Supply (Nickel Alloy)This SBA set-aside subcontract, managed by the Department of the Navy's Navsup Weapon Systems Support Mech, involves the procurement of specialized raw nickel alloy material for prime contractors working on Navy projects. The scope of work requires the sourcing and delivery of certified raw material stock bars and rods that strictly adhere to specification QQ-N-286, form 2, specifically requiring the material to be cold drawn, annealed, and age hardened. The contractor is responsible for providing all necessary material certifications to prove compliance with the form 2 requirements. Performance for this contract will take place in Mechanicsburg, Pennsylvania, under NAICS code 331491. The solicitation was posted on October 15, 2026, with a response deadline of October 30, 2026.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS