Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

MATTING, FLOOR

Active
70Z08026P21079B00Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The United States Coast Guard Surface Forces Logistics Center is soliciting quotations for 20 rolls of floor matting, NSN 7220-00-267-4630, manufactured by BILTRITE CORPORATION with OEM part number 67454630. The matting must be MEG SWITCH BOARD MATTING measuring 1/8 inch thick by 36 inches wide by 25 yards long, Type II, in blue, and must fully comply with MIL-DTL-15562G specifications. Each roll must be individually packaged in accordance with MIL-STD-2073-1E Method 10, cushioned and placed in an ASTM-D5118 single-wall fiberboard box, with marking strictly following MIL-STD-129R and barcoding per ISO/IEC-16388-2007 using Code 39 symbology. Vendors unable to meet these packaging and labeling requirements may use a third party but must include the added cost in their quote. No standard commercial packaging is acceptable, and failure to comply will result in rejection and return of goods. Only the brand-name part is eligible for award; alternate products must meet all salient specifications as determined by the Coast Guard. Deliveries must be F.O.B. Destination to the USCG Surface Forces Logistics Center in Baltimore, Maryland, marked for Receiving Room, Building 88. The solicitation is issued under FAR Subpart 12.6 as a commercial item request using simplified acquisition procedures, with award to be made on a lowest price technically acceptable basis using a firm fixed price contract. All offerors must be registered in SAM.gov, possess a valid DUNS number, and provide their Tax Identification Number. The closing date for submissions is August 5, 2026, at 10:00 AM Eastern Standard Time. Offers must include completed FAR 52.212-3 representations and certifications, and must address applicable clauses regarding subcontracting, small business participation, prohibition of inverted domestic corporations, Buy American Act, combatting human trafficking, child labor, and payment by electronic funds transfer. The solicitation includes mandatory compliance with HSAR, CGAP, and other federal regulations, and is subject to protest after award under applicable law. This is not a set-aside, and all responsible sources may respond.

General Info

20 rolls of blue MEG SWITCH BOARD MATTING, 1/8" x 36" x 25 yd, MIL-DTL-15562G, F.O.B. Baltimore, lowest price technically acceptable.

Agency

Department Of Homeland Security → Sflc Procurement Branch 1(00080)View Agency

NAICS

449121 - Floor Covering RetailersView NAICS

Place of Performance

Curtis Bay, MD, 21226, USA

Set-Aside

NONE

Documents

(2)

52.212-3 Offeror Representations and Certifications—Commercial Products and Services (Oct 2025)

DOCXprovision

MIL-STD-2073.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Sflc Procurement Branch 1(00080)
Contacts1 person available
OfficeNORFOLK, VA, 23510, USA
Organization / Agency
Department Of Homeland Security → Sflc Procurement Branch 1(00080)
View Agency Profile
Office AddressNORFOLK, VA, 23510, USA

Full Description

Show more

The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following part:


Item 1)


NSN: 7220-00-267-4630


ITEM NAME: MATTING, FLOOR


OEM PN: 67454630


MFG: BILTRITE CORPORATION 


QTY: 20 RO


DESCRIPTIVE/SPEC DATA:  


MEG SWITCH BOARD MATTING 1/8" X 36" X 25YD - TYPE II - BLUE (MEETS ALL REQUIREMENTS OF MIL-DTL-15562G)


INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MILSTD-2073-1E METHOD 10, CUSHIONED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 SINGLE-WALL FIBERBOARD BOX. FAILURE TO MEET THE PACKING, PACKAGING, MARKING AND BAR CODING REQUIREMENTS WILL RESULT IN WAREHOUSE REJECTION AND ITEMS WILL BE SHIPPED BACK TO VENDOR. MARKING IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGY.


IF VENDORS CANNOT INDIVIDUALLY PACKAGE, PACK, MARK AND BAR-CODE AS REQUIRED VENDORS MAY USE A THIRD PARTY TO PACKAGE ITEMS AS REQUIRED IF NECESSARY. PROVIDE ADDITIONAL COST WITH QUOTATION. ITEMS THAT ARE NOT INDIVIDUALLY PACKAGED WILL NOT BE RECEIVED BY THE WAREHOUSE AND WILL NOT BE ACCEPTABLE.



*****DO NOT SUBMIT QUOTE IF YOU CANNOT MEET THE PACKAGING REQUIREMENTS WITHIN THIS SOLICITATION. STANDARD COMMERCIAL PACKAGING IS UNACCEPTABLE - IF YOU CANNOT MEET THE COAST GUARDS PACKAGING REQUIREMENTS YOUR QUOTE WILL NOT BE ACCEPTED. *****



Brand Name part is mandatory to be considered for award, offers of “equal” products must meet the salient physical, functional, or performance characteristic specified in this solicitation and USCG will determine if alternate part is acceptable.



Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore MD 21126, Mark for: Receiving Room Bldg. 88.



This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2025-05 (Oct 1, 2025) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested, and a written solicitation will not be issued. The NAICS code for this solicitation is 449121 and the business size standard is 700. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13.106 apply. 




The U.S. Coast Guard intends to award on an all or none basis to a responsible offeror whose offer conforming to the solicitation will be the most advantageous to the Government.  Award will be lowest price technically acceptable.  The Coast Guard intends to award a Firm Fixed Price Contract.
 


All responsible sources may submit a quotation, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with SYSTEMS FOR AWARD MANAGEMENT (www.sam.gov) and shall provide the company Tax Information Number (TIN) with their offer. The closing date and time for receipt of quote is August 5th,2026, at 10:00 am Eastern Standard Time



OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE:


Disclosure: The offeror under this solicitation represents that [Check one]:
__ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73;
__ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or
__it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal


__HSAR 3052.209-70 Prohibition on contracts with corporate expatriates (June 2006)



(End of provision)



The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (Sep 2023); FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (Oct 2025) with Alternate I, Offeror(s) must include a completed copy of FAR 52.212-3 with their quote.


The following FAR Clauses apply to this solicitation. Offerors may obtain full text versions of these clauses electronically at www.acquisition.gov.; FAR 52.212-4, Contract Terms and Conditions-Commercial Items (Nov 2023); FAR 52.212-5, Contract Terms & Conditions Required to Implement Statutes or Executive Orders-Commercial Items (Oct 2025).



The following clauses listed within FAR:



52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)



52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553)



52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C. 3805 note)



The following clauses listed within 52.212-5 are applicable:



FAR 52.203-6 Restrictions on Subcontractor Sales to the Government (Jun 2020, with Alternate I (Nov 2021)



FAR 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Mar 2020)



52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (June 2020)



52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (June 2020) (31 U.S.C. 6101 note).



FAR 52.219-6, Notice of Total Small Business Set-Aside (Nov 2022)(15 U.S.C. 644).



FAR 52.219-28, Post Award Small Business Program representation (Feb 2024)(15 U.S.C. 632(a)(2)



FAR 52.222-3, Convict Labor (Jun 2003) (E.O. 11755)



FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Feb 2024) (E.O. 13126)



FAR 52.222-21, Prohibition of Segregated Facilities (April 2015)



FAR 52.222-50, Combat Trafficking in Persons (Oct 2025) (22 U.S.C. chapter 78 and E.O. 13627)



FAR 52.225-1 Buy American Act-Supplies (Oct 2022)



FAR 52.225-3, Buy American Act-Free Trade Agreement (Nov 2023) (41 U.S.C. 10a-10d)



FAR 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021)



52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct 2018) (31 U.S.C. 3332).



The following items are incorporated as addenda to this solicitation: Copies of HSAR clauses may be obtained electronically at www.dhs.gov.



CGAP 3042.302-90 Valuation Requirements for the Acquisition of Spare Parts Purchased for Inventory Control Points from HQ Contracts (OCT 2008). Copies of CGAP clauses may be obtained electronically at: www.uscg.mil/acquisition/procurement/pdf/CIM_4200_19H.pdf


Similar Contracts

Same NAICS industry code

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 1(00080)

Same awarding agency

NAICS: 3342
New
Federal
INTERCOMMUNICATION STATION
Solicitation # 70Z08026QRN062
The United States Coast Guard is soliciting quotations for five Intercommunication Stations, part number LS-518A/SIC, under a combined synopsis/solicitation issued as a commercial item in accordance with FAR Subpart 12.6. The requirement is for a Firm Fixed Price contract to be awarded on a lowest price technically acceptable basis, with an all-or-nothing award decision. The item is managed under National Stock Number 5830-01-018-1202 and is subject to MIL-STD-2073 IE Method 41 packaging standards, which must be strictly adhered to—failure to meet these packaging requirements will result in rejection of the quote. The North American Industry Classification System code is 333998, and the procurement is a total small business set-aside, meaning only small business concerns may compete, with no price evaluation preference for HUBZone or other designated categories unless specifically waived by the offeror. All offerors must be registered in SAM, possess a valid DUNS number, provide their Taxpayer Identification Number, and submit a completed FAR 52.212-3 form along with their quotation. Proposals must be emailed to Eric.I.Goldstein@uscg.mil by 9:00 AM Eastern Standard Time on August 11, 2026, and delivered to 2401 Hawkins Point Road, Baltimore, MD, 21226. The solicitation incorporates numerous FAR clauses related to ethics, equal opportunity, labor standards, cybersecurity, trafficking in persons, Buy American provisions, foreign purchase restrictions, payment methods, privacy, and supply chain security, including mandatory flow-down requirements to subcontractors for key compliance areas such as whistleblower protections, equal opportunity, and anti-trafficking policies. Offerors must also affirm their status regarding inverted domestic corporations and comply with all applicable laws and executive orders referenced in the contract clauses.
Communications Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336611
New
Federal
52000QR260026976- CGC Earl Cunningham and CGC Frederick Mann Underwater Hull Inspect, Clean & Zinc Renewal
Solicitation # 52000QR260026976
The U.S. Coast Guard Surface Force Logistics Center is soliciting firm-fixed price quotations under solicitation number 52000QR260026976 for underwater hull inspection, cleaning, and zinc anode renewal services for the CGC Earl Cunningham and CGC Frederick Mann, with performance strictly limited to two designated windows: August 10–14, 2026, for the Earl Cunningham and August 17–21, 2026, for the Frederick Mann at USCG Base Kodiak, Alaska. This procurement is a total small business set-aside under NAICS code 336611, processed under FAR Part 12 as a commercial services acquisition using simplified acquisition procedures outlined in FAR Part 13. The solicitation was reopened via amendment to resolve a critical discrepancy between conflicting submission deadlines cited in the original notice, with the final closing time firmly established as 10:00 a.m. Eastern Standard Time on August 6, 2026. All proposals must be submitted via email to Cornelius Claiborne and carbon copied to Karla Balint, and must include a detailed cost breakdown, unit and total pricing, payment terms, discount for prompt payment, and the vendor’s Unique Entity ID and CAGE code, all on official company letterhead. Vendors must maintain an active SAM.gov registration with a current UEI prior to submission, as required by FAR 52.204-7 and FAR 52.212-3, and complete all applicable representations and certifications electronically through SAM.gov. The work requires certified divers and a tender team operating in compliance with 29 CFR Part 1910, Subpart T, with mixed-gas diving and live boating strictly prohibited. Contractors must adhere to Coast Guard Maintenance Procedure Codes B10015.D and B10018.D for hull inspection and anode replacement, respectively, and utilize the specified Coast Guard drawings and SFLC Std Spec 0000 for technical guidance. Performance includes full underwater hull inspection for structural anomalies, removal of marine growth and contaminants, replacement of zinc anodes including twelve additional stern tube anodes not previously documented, and delivery of written and audio-video reports with narration and photographic evidence within 24 hours after work completion. All video reports must be submitted on two DVDs formatted to USCG specifications. The Government retains the right to award on an all-or-none basis
Ship Building and Repairing

POSTED

about 10 hours ago

DEADLINE

in 1 day
View Details
NAICS: 333998
New
Federal
TRANSMITTER,PRESSURE
Solicitation # 70z08026QDE027
The U.S. Coast Guard Surface Forces Logistics Center is soliciting bids for 20 pressure transmitters, part number 0025353231, manufactured by Rolls-Royce Solutions GmbH, for use on 87 WPB vessels. The items must be sourced as brand name products, with no substitutions allowed unless they meet all salient physical, functional, and performance characteristics and are approved by the Coast Guard. Each transmitter must be individually packaged in compliance with MIL-STD-2073-1E Method 10 and marked according to MIL-STD-129R, using ISO/IEC-16388-2007 Code 39 symbology for barcoding; failure to comply will result in rejection and return of the shipment. The solicitation is issued under FAR Subpart 12.6 as a commercial item acquisition using simplified acquisition procedures, with award based on the lowest price technically acceptable model under a firm fixed price contract. Delivery is required to 2401 Hawkins Point Road, Baltimore, MD, 21226. Vendors must be registered in SAM, possess a valid DUNS number, provide their Tax Identification Number, and submit quotes via email to Eric.I.Goldstein@uscg.mil by August 11, 2026, at 9:00 AM Eastern Standard Time. All quotes must include a completed FAR 52.212-3 form and a disclosure regarding inverted domestic corporation status. The contract incorporates numerous FAR clauses related to ethics, labor standards, equal opportunity, anti-trafficking, Buy American, export controls, cybersecurity, and supply chain security. Of particular note, clauses prohibiting contracting with Kaspersky, ByteDance, and certain foreign entities, along with requirements for electronic funds transfer and compliance with human rights and labor protections, are binding. The set-aside designation is for total small business, and a HUBZone price evaluation preference applies. Vendors must explicitly confirm their ability to meet the mandatory packaging and marking requirements; standard commercial packaging is unacceptable. The NAICS code is 333998, and the small business size standard is 500 employees.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 7 days
View Details
NAICS: 321920
New
Federal
Heat-Treated Wood Packaging Manufacturing and CertificationThe contract involves the manufacturing and supply of wood packaging materials, specifically pallets and crates, that comply with ISPM-15 international phytosanitary standards through heat treatment. All products must be properly marked with the HT or DH designation to indicate thermal treatment, along with the ISO country code, the certified facility identification number, and the official trademark of an accredited inspection agency. These markings are mandatory to ensure compliance with global regulations for the safe transport of goods and to prevent the spread of invasive pests. The scope of work centers entirely on production and certification, requiring strict adherence to international guidelines and consistent quality control throughout the manufacturing process. This is a subcontract under the Department of Homeland Security’s Sflc Procurement Branch 1, categorized under NAICS code 321920 for other wood product manufacturing. The solicitation was posted on August 3, 2026, with a firm deadline for responses set for August 5, 2026, at 1:00 PM. While specific performance locations and contact details are not provided, the requirement implies delivery to U.S. federal destinations where regulated wood packaging is needed for international shipments. Participation requires proven capability in producing and certifying compliant packaging, with demonstrated experience in meeting international standards and proper documentation of certification processes.
Wood Container and Pallet Manufacturing

POSTED

1 day ago

DEADLINE

in about 15 hours
View Details
NAICS: 518210
New
Federal
Military Shipping Label (MSL) and Bar Code ComplianceThe contract requires the generation and application of bar-coded military shipping labels in strict compliance with MIL-STD-129, incorporating essential data elements including Transportation Control Number (TCN), Department of Defense Activity Address Code (DODAAC), and piece number. This subcontract mandates precise adherence to standardized labeling protocols to ensure accurate tracking, inventory management, and logistics operations within the Department of Defense supply chain. The labels must be produced and applied with high reliability to support seamless movement of military materiel across global supply networks. The opportunity is posted under NAICS code 518210 and is managed by the Sflc Procurement Branch 1 within the Department of Homeland Security. The response deadline is set for August 5, 2026, with a submission window of only 48 hours from the posting date of August 3, 2026, indicating a highly time-sensitive procurement. The place of performance and point of contact details are not specified, suggesting flexibility in execution location or reliance on vendor logistics coordination. This subcontract emphasizes technical precision and regulatory compliance over geographic or organizational constraints, targeting vendors with proven capability in defense labeling systems.
Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

1 day ago

DEADLINE

in about 15 hours
View Details
NAICS: 541330
New
Federal
Military-Compliant Packaging Design and EngineeringThe contract calls for the design and engineering of packaging systems that fully comply with MIL-STD-2073-1E standards, ensuring rigorous preservation, cushioning, sealing, and environmental protection for military-grade assets. The work requires precise adherence to federal specifications for long-term storage and transportation under extreme conditions, covering all aspects of material selection, structural integrity, and containment methods to safeguard sensitive equipment from moisture, corrosion, shock, and other environmental threats. Deliverables must meet or exceed the performance benchmarks outlined in the standard without deviation, and the contractor is expected to provide technical documentation and validation to confirm compliance throughout the development and implementation phases. This subcontract opportunity, posted on August 3, 2026, with a response deadline of August 5, 2026, falls under NAICS code 541330 for engineering services and is managed by the Sflc Procurement Branch 1 under the Department of Homeland Security. The work does not have a specified place of performance, indicating flexibility in execution, but all deliverables must be capable of supporting military logistics and supply chain requirements. There is no set-aside classification, meaning all eligible entities may compete, and no point of contact is listed, suggesting proposals must be submitted through the designated SAM.gov portal without prior direct communication. The submission window is extremely narrow, requiring rapid preparation and technical accuracy to meet the deadline.
Engineering Services

POSTED

1 day ago

DEADLINE

in about 15 hours
View Details
NAICS: 336611
New
Federal
DOCKSIDE (DS): CGC BEAR AA FY27
Solicitation # 70Z08026QMECP0025
The contract for USCGC BEAR (WMEC-901) Aviation Availability FY27 is a Firm Fixed Price solicitation issued as a Request for Quotations under a Total Small Business Set-Aside, targeting qualified small businesses to perform comprehensive aviation maintenance services aboard the vessel at its homeport in Portsmouth, Virginia. The period of performance is narrowly defined from January 5, 2027, to February 3, 2027, requiring the contractor to furnish all labor, materials, equipment, and services necessary to execute specified tasks in strict compliance with the SFLC Std Spec 0000 and other referenced standards, including NAVSEA Drawing 804-1213717 for helicopter tie-down fitting renewal at two precise locations on the flight deck. The scope includes critical deliverables such as a detailed Planning Document with graphical representations and milestone timelines, a Production Schedule due within three working days of vessel arrival, and multiple Critical Inspection Reports, particularly for substrate inspections, all governed by rigorous quality assurance protocols requiring the use of QA-3a and QA-4 forms for surface profile and salt conductivity testing. The contractor must adhere to stringent safety standards under OSHA Title 29 Part 1915, comply with DHS information security policies including MD 11042.1 for FOUO data and FIPS 140-2 encryption requirements, and implement protective measures for all vessel components and systems susceptible to interference from structural elements like insulation, ductwork, and electrical wiring. The award evaluation process prioritizes technical capability and past performance as significantly more important than price, with a best value tradeoff approach determining selection; however, price becomes controlling if offers are substantially equal in technical and performance merit. Invoicing must be conducted exclusively through the Invoice Processing Platform (IPP), with no invoice submission permitted until at least 25% of a CLIN is complete unless waived by the Contracting Officer, and 10% of the total contract value will be withheld until all deliverables are formally accepted. The contractor must maintain active SAM registration with a valid UEI and CAGE code throughout performance, submit signed DHS Non-Disclosure Agreements for all personnel handling sensitive information within two days of execution, and ensure no Sensitive Personally Identifiable Information is stored in billing systems. Proposals must be structured in four clearly delimited volumes with strict page limits and formatting rules: Volume I (Technical Capability, 15 pages), Volume II (Experience
Ship Building and Repairing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 332919
New
Federal
VALVE SAFETY RELIEF
Solicitation # 70Z08026QAJ042
The United States Coast Guard Surface Forces Logistics Center is soliciting quotations for two specialized safety relief valves essential to the 154 FRC ships’ service air system. Both valves, manufactured by Taylor Valve Technology, are identical in construction—stainless steel bodies with 316SS seat frames, 17-7SS springs, and Viton O-rings—differing only in pressure settings: one rated for 150 PSI and the other for 35 PSI, each with a 1/2” MNPT inlet and 1” FNPT outlet and a D-orifice design. Ten units of each valve are required, identified by their respective part numbers 825D3041831-150 and 825D1041831-35. Strict packaging requirements mandate that each valve be individually packaged per MIL-STD-2073-1E Method 10, cushioned and enclosed in ASTM-D5118 double-wall fiberboard boxes, with all external markings compliant with MIL-STD-129R and barcoded using ISO/IEC-16388-2007 Code 39 symbology. Commercial packaging is unacceptable, and failure to comply will result in rejection and return of the goods. Vendors may use third-party packaging services if needed, but must include associated costs in their quotations. The solicitation is issued under simplified acquisition procedures as a firm fixed price contract with an award based on lowest price technically acceptable. All submissions must originate from vendors registered in SAM.gov with a valid DUNS number and tax information provided. The NAICS code is 332919, and the procurement is a total small business set-aside, meaning only qualified small businesses may compete. Delivery must be F.O.B. Destination to the USCG Surface Forces Logistics Center in Baltimore, Maryland, with required labeling for Receiving Room, Building 88. The deadline for quotations is August 10, 2026, at 10:00 AM Eastern Standard Time. Offerors must complete and submit FAR 52.212-3 representations and certifications, including disclosures regarding corporate inversion status and compliance with anti-expatriate and subcontracting restrictions. Additional clauses governing procurement integrity, labor standards, Buy American Act, electronic funds transfer, and trafficking in persons prohibitions are fully incorporated. The contracting office is the Department of Homeland Security,
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details