MATTRESSES

Section SF 1449 - CONTINUATION SHEET ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0001 192 Each MATTRESS FFP EACH SPECIFICATION STATED BELOW MUST BE ADDRESSED IN YOUR QUOTE TO BE CONSIDERED TECHNICALLY ACCEPTABLE. 1. Width: 36" Minimum to 38" Maximum 2. Length: 78" Minimum to 80" Maximum 3. Thickness: 8" Minimum to 9" Maximum 4. Two-sided Twin XL mattress 5. A minimum of 280 double, heat-tempered steel, Bonnell innerspring coils (13 gauge minimum), each coil with minimum one turn per inch. 6. Edge support with no less than 6-gauge minimum border wire secured to the outer row of perimeter coils by helicals to protect the edges from premature breakdown. Wire border must be butt-welded at ends (support seating usage). 7. All sides shall be completely enclosed with adequate padding so that no sharp edges or coils can be felt. 8. A dark colored, outer-cover, made of breathable, soft, and comfortable polyurethane-coated nylon fabric or similar Polybrominated Diphenyl Ether (PDBE) and Polyvinyl Chloride (PVC) material. 9. All seams shall have a taped edge to resist raveling and zippering if stitches are broken or cut. 10. Mattress shall have a bonded, flame resistant insulation pad or fire retardant fiber (laminated to the outer cover) on top and bottom as a fire barrier. 11. Beneath the fire barrier, a minimum of 1.5 in thick High Resilience (HR) polyurethane high density foam (one piece) with an unfilled density of at least 1.5 pounds per cubic foot and minimum Indentation Load Deflection (ILD) of 30 on both sides of mattress. 12. Fluid Proof 13. Hypoallergenic 14. Bug Resistant 15.Antimicrobial 16. Antistatic 17.Crack resistant 18. Flame Retardant. 19. Must Meet the Consumer Product Safety Commission (CPSC) 16. 20. Must Meet the Code of Federal Regulations (CFR) 1632 and 16 CFR 1633. 21. Minimum of 10 year warranty (years 1-5 non-prorated and years 6-10 prorated) to cover manufacturer defects during normal wear and usage. Coverage shall include any damage to bedding material/cover, under normal wear and proper handling that result in the material/cover to split, crack, or collapse. FOB: Destination MILSTRIP: MMP20014SS00062 PURCHASE REQUEST NUMBER: MMP20014SS00062 NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0002 1 Each FREIGHT CHARGES FFP FREIGHT CHARGES FOB: Destination MILSTRIP: MMP20014SS00062 PURCHASE REQUEST NUMBER: MMP20014SS00062 NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0003 1 Each INSTALLATION FFP INSTALLATION OF MATTRESS AT BARRACKS HP-255 IN ACCORDANCE WITH THE STATEMENT OF WORK Installation of all items. Removal of all Packagine Debris FOB: Destination MILSTRIP: MMP20014SS00062 PURCHASE REQUEST NUMBER: MMP20014SS00062 NET AMT . The solicitation is a 100% set-aside for Small Business pursuant to 52.219-6. The associated NAICS code is 337910. Quotes from other than small businesses will not be considered for award. The Marine Corps Installations East, Regional Contracting Office, Camp Lejeune, North Carolina is issuing this Request for Quote (RFQ), M67001-14-Q-0203, for the acquisition of mattresses in accordance with FAR Part 12 "Acquisition of Commercial Items". Required items and specifications are listed in Schedule of Items and Statement of Work below. The Government intends to award a single contract as a result of this solicitation. The Government reserves the right to award without discussions, but reserves the right to engage in discussions if later determined to be in the best interest of the Government. A single firm-fixed price contract will be awarded for this requirement. This acquisition will be conducted in accordance with FAR Part 12, Acquisition of Commercial Items and FAR 13, Simplified Acquisition Procedures. The RFQ documents and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-74, effective 30 May 2014 and DFARS Publication Notice (DPN) 20140528. The proposed acquisition is for a 100% small business set-aside for the associated NAICS code 337910. Offerors must be registered in the System for Award Management (SAM) database. Information on registering in SAM may be obtained by calling +1 (555) 000-0000 or via the internet at http://www.sam.gov. The provision at 52.212-1, Instructions to Offerors - Commercial Items applies to this acquisition. DELIVERY/INSTALLATION: The Government requires delivery at the time of installation. The contract award, resulting from this solicitation, will provide the Government Representative contact information to arrange delivery and installation. Installation is required. A post-award meeting, between the Contractor and Government representative, will be scheduled within three (3) business days of contract award to arrange and coordinate installation of all items. Please see the Statement of Work for complete delivery/installation requirements. PRICING: All quotes shall be the Contractor's Best Pricing. EVALUATION. Award will be made to the Lowest Price Technically Acceptable quote. The Government intends to make a single Firm Fixed Price Award to satisfy this requirement. Award will be based on the initial evaluation of quotes received in response to the solicitation. Therefore, quoters are cautioned that their initial quotes should contain their best terms from a technical and price standpoint. Evaluation of quotes will be conducted on a lowest-priced, technically acceptable basis. All quotes will be evaluated first on price. The lowest priced quote will be evaluated for technical acceptability on an acceptable/unacceptable basis. If the lowest priced quote is found to be technically acceptable, then no further evaluations will be conducted and award will be made. If the lowest priced quote is not technically acceptable, the next lowest priced offer will be evaluated, and so on until a technically acceptable quote is found. TECHNICAL COMPLIANCE: To ensure technical compliance: a. The manufacturer's name and manufacturer's complete part number of each line item shall be submitted in the quote. A mere statement that the quoter will meet the Government's requirement is NOT sufficient. Additionally, simply regurgitating (copy and pasting) the specifications in the solicitation is NOT sufficient. b. Quoters shall provide product literature and description of all quoted items; and c. Clearly state whether the quoter can meet the required period of performance timeframe. Vendors who cannot meet the required period of performance will not be considered technically acceptable. PREPARATION OF THE RESPONSE TO THE SOLICITAITON FOR COMMERCIAL ITEMS. Quotes submitted shall include the following: (a) Technical Quote to include quoted delivery/installation time (b) Price/Quote (c) Vendors must complete and return DFARS 252.209-7993 Deviation and return with their quote package. DFARS 252.209-7993 is incorporate by FULL TEXT in this solicitation, under the Clause and Provision section. SUBMISSION OF QUOTES: Quotes related to this RFQ shall be received by the Contracting Department within the date and time specified in Block 8 on the first page of this solicitation, to be considered for award. The information submitted shall be clear and legible (Note: repetitively copied data loses its clarity and legibility.) Quotes may be submitted via email to contact@example.gov; via facsimile to +1 (555) 000-0000 Attn: Jean Wagnac; or via courier to Contracting Department, Bldg 1116, Camp Lejeune, NC 28542. Submitted quotes must reflect Technical and Price as described in this Request for Quote. It is solely the Contractor's responsibility to ensure proposals are received within the required timeframe. INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government DELIVERY INFORMATION CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC 0001 120 dys. ADC 192 N/A FOB: Destination 0002 120 dys. ADC 1 N/A FOB: Destination 0003 120 dys. ADC 1 N/A FOB: Destination STATMENT OF WORK 1. BACKGROUND This is an acquisition of Hadnot Point BEQ Mattresses and associated delivery/installation services. Items listed in the Purchase Request shall be delivered and installed in the above designated building. Building has (3) floors, (2) exterior stairways to left and right of building, and (1) interior stairway located center of building. All stairways connect each floor and lead to exterior cat-walks. There are NO elevators/lifts. Currently, building is UNOCCUPIED. If building is to be OCCUPIED prior to/or during the installation of the items, a Base Property representative will provide notice to Contracting Office and the contractor and installation shall be conducted in such a manner to prevent displacement of occupants. The contractor will be required to deliver and install the items as well as remove and dispose of all packaging and installation debris. 2. SCOPE OF WORK 2.1 REQUIREMENT Contractor shall provide the Mattresses as indicated in schedule and 2.2.3. Installation. Contractor shall perform per all specifications and contract requirements. 2.2 CONTRACTOR SPECIFICATIONS Contractor Shall: 2.2.1 Arrange Pre-Installation meeting(s) with a Base Property (Government) representative within (3) business days of contractor award. Purpose of this meeting is to coordinate delivery/ installation schedules. Base Property Government points of contact are as follows: TBD time of Award OPERATING HOURS: Normal operating hours are 7:30 AM EST - 4:00 PM EST, Monday through Friday. Closed on weekends and federal holidays. 2.2.2 DELIVERY Delivery shall be coordinated with Base Property (Government) representative. REQUEST DELIVERY NOTIFICATION A MINIMUM OF ONE WEEK PRIOR TO DELIVERY/INSTALLATION. The successful offeror shall provide a Project Manager to be on site throughout the entire project. The Project Manager shall have authority to represent the company to coordinate all services and issues through the Contracting and Base Property Offices. All work will be conducted during the normal operating hours listed above. Deliver all Mattresses directly to the required building at time of installation. Forklift(s) and temporary storage trailers/ storage vehicles may be set up in vicinity of buildings, with locations as directed by the government representative. Cost of forklift and storage trailers/vehicle is the full responsibility of the contractor. NO GOVERNMENT-OWNED FORKLIFTS, WAREHOUSING, OR STORAGE FACILITIES WILL BE PROVIDED. 2.2.3 Installation Installation of Mattresses shall be coordinated with Base Property (Government) representative and IAW floor plans (provided at Pre-Installation Meeting if not received by Contract Award). Building is (3) floors, ground-load following to total (96) rooms/ (32) rooms per floor: (2) Mattresses per room (total 192) Hallways to rooms shall be protected with some form of padding. Items needed to be installed and set-up as functional. Notify a Base Property Representative if any items are found inoperable; they must be replaced. Any deviations or modifications will need to be brought to the attention of the Base Property Officer/Director, Supply Management Division and may only be approved by the Contracting Officer via a signed modification on a Standard Form 30 (SF30). 2.2.4 REMOVAL Contractor is responsible for removal of all packing materials and debris from delivery and installation to include drill dust and foot traffic (e.g. dirt, sand, mud, grass, water). 2.2.5 DISPOSAL Contractor will clean-up/remove from all mattresses all plastics, tape, card board packaging, zip ties, Styrofoam, etc. Once a week (maximum), debris may be taken to the Materials Recycling Facility (MRF)/Landfill located on Piney Green Road (materials must be sorted as cardboard, plastic, and wood). Driver must have a copy of the contract and placard provided by Base Property to enter the site. 2.2.6 FACILITY DAMAGE Contractor shall be responsible for all damages to buildings or surrounding areas (including lawns) when moving or installing Mattresses /furnishings. Damages shall be repaired and installed by contractor at contractor's expense before final invoicing. 2.2.7. PARKING CONTAINERS Contractor must provide any containers if storage is necessary. Contractor shall be responsible for ensuring all storage containers maintained on the job site are locked. Parking of equipment and vehicles will be in designated areas or in authorized parking lots (normally not on the grass or lawn). Contractor shall provide all necessary material handling equipment and tools required to support this requirement to include non-marking, rubber-wheeled hand trucks, dollies, and carts. Contractor shall be responsible for securing all material handling equipment. The Government will not be liable for any stolen or damaged property that is left unsecured by the Contractor. CLAUSES INCORPORATED BY FULL TEXT 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): https://www.acquisition.gov/FAR/loadmainre.html or http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html (End of provision 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): https://www.acquisition.gov/FAR/loadmainre.html http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html (End of clause) CLAUSES INCORPORATED BY REFERENCE 52.204-7 System for Award Management JUL 2013 52.204-13 System for Award Management Maintenance JUL 2013 52.212-1 Instructions to Offerors--Commercial Items APR 2014 52.212-4 Contract Terms and Conditions--Commercial Items SEP 2013 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-- Representation and Certifications. DEC 2012 252.203-7000 Requirements Relating to Compensation of Former DoD Officials SEP 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD Officials NOV 2011 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7004 Alt A System for Award Management Alternate A MAR 2014 252.204-7012 Safeguarding of unclassified controlled technical information NOV 2013 252.225-7000 Buy American--Balance Of Payments Program Certificate JAN 2014 252.225-7001 Buy American And Balance Of Payments Program DEC 2012 252.225-7002 Qualifying Country Sources As Subcontractors DEC 2012 252.225-7031 Secondary Arab Boycott Of Israel JUN 2005 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports JUN 2012 252.232-7010 Levies on Contract Payments DEC 2006 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.247-7023 Transportation of Supplies by Sea APR 2014 CLAUSES INCORPORATED BY FULL TEXT 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (NOV 2013) An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically via http://www.acquisition.gov. If an offeror has not completed the annual representations and certifications electronically at the System for Award Management (SAM) website, the offeror shall complete only paragraphs (c) through (o) of this provision. (a) Definitions. As used in this provision -- "Economically disadvantaged women-owned small business (EDWOSB) Concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. "Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. Inverted domestic corporation, as used in this section, means a foreign incorporated entity which is treated as an inverted domestic corporation under 6 U.S.C. 395(b), i.e., a corporation that used to be incorporated in the United States, or used to be a partnership in the United States, but now is incorporated in a foreign country, or is a subsidiary whose parent corporation is incorporated in a foreign country, that meets the criteria specified in 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). An inverted domestic corporation as herein defined does not meet the definition of an inverted domestic corporation as defined by the Internal Revenue Code at 26 U.S.C. 7874. Manufactured end product means any end product in Federal Supply Classes (FSC) 1000-9999, except-- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate-- (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. Sensitive technology-- (1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically-- (i) To restrict the free flow of unbiased information in Iran; or (ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and (2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)). Service-disabled veteran-owned small business concern-- (1) Means a small business concern-- (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). "Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. Subsidiary means an entity in which more than 50 percent of the entity is owned-- (1) Directly by a parent corporation; or (2) Through another subsidiary of a parent corporation. Veteran-owned small business concern means a small business concern-- (1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. "Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and whose management and daily business operations are controlled by one or more women. "Women-owned small business concern" means a small business concern-- (1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; or (2) Whose management and daily business operations are controlled by one or more women. Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127)", means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States. (b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted electronically on the SAM website. (2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications--Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ----------. [Offeror to identify the applicable paragraphs at (c) through (o) of this provision that the offeror has completed for the purposes of this solicitation only, if any.) These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on ORCA.] (c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it ( ) is, ( ) is not a small business concern. (2) Veteran-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents as part of its offer that it ( ___ ) is, ( ___ ) is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. (Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.) The offeror represents as part of its offer that it ( ___ ) is, ( ___ ) is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents, for general statistical purposes, that it ( ___ ) is, ( ___ ) is not a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ) is, ( ) is not a women-owned small business concern. Note to paragraphs (c)(8) and (9): Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold. (6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that-- (i) It [ ___ ] is, [ ___ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: ----------.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation. (7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that-- (i) It [ ___ ] is, [ ___ ] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: ----------.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation. (8) Women-owned business concern (other than small business concern). (Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, a women-owned business concern. (9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price: _____________________________________________ (10) (Complete only if the solicitation contains the clause at FAR 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns or FAR 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting, and the offeror desires a benefit based on its disadvantaged status.) (i) General. The offeror represents that either-- (A) It ( ___ ) is, ( ___ ) is not certified by the Small Business Administration as a small disadvantaged business concern and identified, on the date of this representation, as a certified small disadvantaged business concern in the SAM Dynamic Small Business Search database maintained by the Small Business Administration, and that no material change in disadvantaged ownership and control has occurred since its certification, and, where the concern is owned by one or more individuals claiming disadvantaged status, the net worth of each individual upon whom the certification is based does not exceed $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); or (B) It ( ___ ) has, ( ___ ) has not submitted a completed application to the Small Business Administration or a Private Certifier to be certified as a small disadvantaged business concern in accordance with 13 CFR 124, Subpart B, and a decision on that application is pending, and that no material change in disadvantaged ownership and control has occurred since its application was submitted. (ii) Joint Ventures under the Price Evaluation Adjustment for Small Disadvantaged Business Concerns. The offeror represents, as part of its offer, that it is a joint venture that complies with the requirements in 13 CFR 124.1002(f) and that the representation in paragraph (c)(10)(i) of this provision is accurate for the small disadvantaged business concern that is participating in the joint venture. (The offeror shall enter the name of the small disadvantaged business concern that is participating in the joint venture: ____________.) (11) HUBZone small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents, as part of its offer, that-- (i) It [ ___ ] is, [ ___ ] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR Part 126; and (ii) It [ ___ ] is, [ ___ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(11)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns par...