This Solicitation opportunity from Government of Canada was posted on December 4, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

MDB - Armoured Combat Support Vehicle (ACSV) Edmonton

Closed

HQ202106-85210International

Submission Closed12/04/2025, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 236220

New

SLED

CDBG-DR HS004 New Escambia County Area Transit (ECAT) Facility

Solicitation # PD 26-27.004

Solicitation PD 26-27.004 is an invitation for bids to construct a new, resilient, and energy-efficient Escambia County Area Transit (ECAT) facility in Pensacola, Florida. Funded by HUD Community Development Block Grant-Disaster Recovery (CDBG-DR) grants, the project aims to replace infrastructure damaged by Hurricane Sally and relocate operations out of a flood zone. The scope of work involves the construction of five primary structures: an Administration Building, Maintenance Building, Passenger Terminal Transfer Center, Bus Wash, and Fuel Station, along with the addition of a regional stormwater pond to mitigate local flooding. To ensure functionality during emergencies, the facility must be built according to Enhanced Hurricane Protection Area (EHPA) specifications, allowing it to serve as an emergency shelter. The contract is divided into multiple lots, with awards based on the lowest responsive and responsible bid. Bidders must submit electronic responses via the OpenGov portal by November 23, 2026, at 10:00 am. Key requirements include compliance with the Davis-Bacon Act for prevailing wages, HUD Section 3 guidelines to promote economic opportunities for low-income residents, and adherence to ADA and OSHA standards. The successful contractor must provide performance and payment bonds and submit a Quality Control Plan within 10 days of the Notice to Proceed. Liquidated damages for delays are tiered based on the contract amount, with specific daily rates applied per lot.

POSTED

DEADLINE

Building 262 Renovations FLETC Glynco

Solicitation # 70LGLY27RSSB00001

Solicitation 70LGLY27RSSB00001 is a total small business set-aside for a single firm fixed price contract to perform comprehensive interior renovations of Building 262 at the Federal Law Enforcement Training Center in Glynco, Georgia. The scope of work includes replacing corridor and classroom flooring with LVP and carpet tiles, fully remodeling restrooms, updating doors and life-safety components, and repainting interior surfaces. Technical upgrades involve installing raised flooring with integrated electrical distribution for classrooms, replacing variable air volume systems, and updating lighting controls and plumbing. The project is scheduled for a period of performance from January 11, 2027, to March 11, 2028, with a total duration of 425 calendar days after the notice to proceed. The procurement is managed by the Department of Homeland Security, with proposals due by November 18, 2026. Award evaluation is based on three factors of equal importance: past performance, corporate relevant experience, and price. Successful offerors must provide payment and performance bonds, as well as a bid guarantee of 20 percent of the bid price or 3 million dollars. Strict security protocols are in place, requiring background checks, FBI fingerprinting, and adherence to DHS non-disclosure agreements for personnel. All work must comply with ADA accessibility guidelines and prevailing wage determinations for the Georgia region.

Bristol Alliance of Companies

POSTED

DEADLINE

Repair Auto Maintenance Bldg 575

Solicitation # N40085-27-R-9000

Solicitation N40085-27-R-9000 is for the repair and modernization of the Auto Maintenance Facility, Building 575, at Marine Corps Base Camp Lejeune, North Carolina. The project scope is comprehensive, involving selective demolition, building envelope and roofing repairs, interior reconfiguration with new finishes, and the installation of updated HVAC, exhaust extraction, and compressed air systems. Additionally, the work includes a full NFPA-compliant fire suppression system, electrical distribution and lighting upgrades, building automation controls, and site improvements such as paving, drainage, and hazardous materials abatement. The estimated contract value is between 10 million and 25 million dollars, with a performance period of 730 days after award. The contract is awarded based on the lowest price, with specific evaluation rules regarding Buy American Act compliance. Bidders must provide pricing for two primary exhibit line items: building renovation and paving removal and replacement. Key administrative requirements include the submission of monthly invoices via Wide Area WorkFlow and adherence to a three-phase quality control process consisting of preparatory, initial, and follow-on phases. Bonding requirements vary by proposal value, with projects over 150,000 dollars requiring bid, payment, and performance bonds. All work must comply with the Davis-Bacon Act, ADA accessibility guidelines, and specific military and industry standards for piping and lighting.

Bristol Alliance of Companies

POSTED

DEADLINE

Solicitation # weapons-magazine

The Weapons Magazine solicitation, issued by Sauer Construction, focuses on comprehensive site development and foundational infrastructure in Virginia. The scope of work encompasses critical electrical and structural elements, including primary and secondary electrical systems, grounding, lighting protection, and the construction of access roads. Additionally, the project requires specialized geotechnical and structural support through piling foundations, rigid inclusions, and general site work. This opportunity is specifically set aside for small businesses, including designated small disadvantaged businesses, women-owned small businesses, HUBZone small businesses, and veteran-owned or service-disabled veteran-owned small businesses. Interested parties must adhere to a tight response window, with the solicitation posted on November 12, 2026, and a response deadline of November 15, 2026. All inquiries and submissions should be directed to the primary point of contact, David Phillips.

POSTED

DEADLINE

AMC-0194 GPT ATCT Public Announcement

Solicitation # amc-0194-gpt-atct-public-announcement

This solicitation, managed by PTSI Managed Services Inc. (Parsons) for a project in Mississippi, involves a wide range of facility repairs and reinforcements with an estimated construction value between 500,000 and 1,000,000 dollars. The scope of work is multidisciplinary, encompassing electrical corrections such as grounding and SPDS replacement, mechanical repairs to copper piping and chilled water systems, and civil improvements including gate and foundation repairs. Additionally, the project requires structural maintenance like epoxy injection and painting, as well as architectural upgrades involving flooring, window sealing, and gutter installation. The opportunity is set aside for small businesses, including SDB, WOSB, HUBZone, and VOSB certifications, under NAICS code 236220. Interested parties must respond by November 18, 2026. The primary point of contact for this effort is Kurtis Kinard.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

P084 NEXT GENERATION TORPEDO INTEGRATION LAB & P1016 Consolidated RDT&E Systems Facility – Newport, RI

Solicitation # p084-next-generation-torpedo-integration-lab-p1016-consolidated-rdte-systems-facility-newport-ri

J&J Contractors, Inc. is soliciting bids for the construction of the Next Generation Torpedo Integration Lab and the P1016 Consolidated RDT&E Systems Facility in Newport, Rhode Island. The primary project involves a 12,920 square foot multi-story steel frame laboratory and office facility featuring a shallow foundation, metal standing seam roof, and masonry and metal panel exterior walls. This scope encompasses all site preparations and improvements, including landscaping, parking, exterior lighting, and the installation of underground stormwater retention and utility systems. An additional option for the P1016 facility includes a 17,978 square foot laboratory with similar structural specifications and the demolition of an existing 548 square meter engineering facility. The solicitation is open to various small business designations, including SDB, WOSB, HUBZone, and VOSB. Pricing is requested across a wide array of trades, including demolition, abatement, structural steel, mechanical, electrical, plumbing, and sitework. All work must adhere to Davis Bacon Wage Rates, and the project is exempt from sales tax. Interested parties must contact the primary point of contact to receive bid documents via Building Connected before the response deadline of November 30, 2026.

J&J CONTRACTORS, INC.

POSTED

DEADLINE

RENOVATE THE JIM EDGAR EXECUTIVE OFFICE BUILDING PHASE 2 – RENOVATION

Solicitation # renovate-jim-edgar-executive-office-building-phase-2-renovation

River City Construction, LLC is soliciting bids for the second phase of renovation for the Jim Edgar Executive Office Building located in Illinois. This project falls under NAICS code 236220 and is specifically set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. The solicitation was posted on November 12, 2026, and requires all responses to be submitted by the deadline of January 28, 2027, at 11:00 AM. Interested parties should contact Justin Beaty via email at [email hidden] or by phone at [phone hidden] for further information.

River City Construction, LLC

POSTED

DEADLINE

New Arabian Leopard Facility

Solicitation # new-arabian-leopard-facility

Grunley Construction Company is soliciting bids from qualified small business subcontractors and suppliers for Phase 2 of the Arabian Leopard Facility project located at the Smithsonian National Zoological Park in the District of Columbia. The scope of work is extensive, covering a wide range of bid packages including demolition, sitework, utilities, concrete, masonry, steel, roofing, glazing, finishes, MEP trades, landscaping, fencing, and material supply. This opportunity is specifically set aside for various small business designations, including SB, SDB, WOSB, HUBZone, VOSB, and SDVOSB firms. Interested parties must submit their responses by November 20, 2026. Primary inquiries and submissions should be directed to Brana Perlmutter.

Grunley Construction Company

POSTED

DEADLINE

CAPITAL DEVELOPMENT BOARD - CONSTRUCT NEW REST AREA, FORT MASSAC REST AREA

Solicitation # capital-development-board-construct-new-rest-area-fort-massac-rest-area

The Capital Development Board is seeking proposals for the construction of the new Fort Massac Rest Area located in Illinois. This solicitation is specifically set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. The project falls under NAICS code 236220, focusing on commercial and institutional building construction. Interested parties must submit their responses by the deadline of November 18, 2026, at 11:00 AM. The primary point of contact for this opportunity is Brock Bursott at River City Construction, LLC, who can be reached via email at [email hidden] or by phone at [phone hidden].

River City Construction, LLC

POSTED

DEADLINE

Water Damage Restoration

Solicitation # G26-005

Solicitation G26-005 is a request for a single lump sum contract to perform multi-floor water damage restoration in Building 17 at the Grafton Job Corps Center in North Grafton, Massachusetts. Operated by Adams and Associates, Inc. for the U.S. Department of Labor, the project follows a fire sprinkler discharge that impacted the first, second, and third floors, including dormitories, offices, and medical areas. The scope of work involves comprehensive architectural repairs, including the replacement and repair of drywall, painting, ceiling tiles, flooring, rubber wall bases, electrical components, and cabinetry to restore the facility to its original condition. The total period of performance is 105 days, with substantial completion expected within 90 days and final completion within an additional 15 days. This is an SBA set-aside opportunity open to small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Award will be based on best value, with evaluation weighted toward price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Bidders must attend a mandatory pre-bid conference on November 3, 2026, and submit proposals by November 17, 2026. Requirements include a valid Massachusetts Contractor's License, proof of specific automobile liability insurance naming Adams and Associates, Inc. as an additional insured, and compliance with Davis-Bacon Act wage determinations, OSHA, EPA, and NFPA-101 life safety codes. Payment terms are Net 30, and the contractor must provide a one-year workmanship guarantee and a 20-year manufacturer warranty for LVP flooring.

POSTED

DEADLINE

Solicitation # sof-armory

Sauer Construction is seeking bids from all construction trades for the SOF Armory project located in North Carolina. This solicitation is open to a wide range of small business entities, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by November 30, 2026. The primary point of contact for this opportunity is Adam Houck, and the project falls under NAICS code 236220.

POSTED

DEADLINE

Springdale JCC –Dormitory Interior Renovation & Repairs

Solicitation # springdale-jcc-dormitory-interior-renovation-repairs

The Career Systems Development Corporation, operating for the U.S. Department of Labor, is soliciting proposals for the interior renovation and repair of the North Wing dormitory at the Springdale Job Corps Center in Troutdale, Oregon. The project aims to restore water-damaged interior spaces, including sixteen residential rooms, bathrooms, and common areas, to return them to safe residential use. Key technical requirements include the restoration of approximately 300 square feet of floor area in mechanical rooms involving drywall installation, joint finishing, and painting. The contractor is responsible for all labor, materials, equipment, and supervision, as well as the testing of restored mechanical, plumbing, electrical, fire/life-safety, and security systems. A minimum one-year workmanship warranty is required upon final acceptance. This solicitation is set aside for Small Businesses and various SBA-certified categories. Proposals must include detailed relevant experience, a comprehensive description of the proposed work methods—including project phasing and occupied-building protection—and itemized pricing by room and trade. The project is subject to the Davis Bacon Act under wage determination OR20260100, requiring the submission of weekly certified payrolls. Awarded contractors must provide payment and performance bonding for the full project value within ten days of award, along with proof of liability insurance with a minimum of 1 million dollars per occurrence and 3 million dollars general aggregate. Pricing submitted in proposals must remain firm for at least 60 calendar days.

Career Systems Development Corporation

POSTED

about 2 hours ago

DEADLINE

in 7 days

AI Contract Overview

Defence Construction Canada is seeking proposals from qualified Design-Build Teams for the design and construction of the Armoured Combat Support Vehicle project at 3 CDSB in Edmonton, Alberta. This project utilizes a modified design-build approach with a Rough Order Magnitude construction cost estimate of 78 million dollars. The solicitation is conducted under the guidelines of the Canadian Free Trade Agreement, the Canada-European Union Comprehensive Economic and Trade Agreement, and the World Trade Organization Agreement on Government Procurement. Interested firms must submit their proposals through the MERX Electronic Bidding System by the closing date of December 4, 2025. The selected Design-Builder is required to maintain a valid Designated Organization Screening issued by the Contract Security Program. All inquiries must be directed exclusively to the identified point of contact to avoid disqualification. The contract involves a wide range of professional roles, including specialized architects, engineers, and project managers, with compensation structured through hourly rates and specific fee allowances.

General Info

Design-build proposals for Edmonton Armoured Combat Support Vehicle project due December 4, 2025.

Agency

Government of Canada → Defence Construction Canada / Construction de Défense Canada

NAICS

236220 - Commercial and Institutional Building Construction

Place of Performance

CAN

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedDec 4

Solicitation

Response DeadlineDec 4

Deadline has passed

Submission Closed

12/04/2025, 02:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Defence Construction Canada / Construction de Défense Canada

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → Defence Construction Canada / Construction de Défense Canada

Office AddressN/A

Contacts

Sarah MontesanoPoint of Contact

Full Description

*** THIS AMENDS THE PREVIOUSLY POSTED NOTICE TO CHANGE THE CLOSING DATE TO DECEMBER 4, 2025. TIME AND CLOSING LOCATION REMAIN UNCHANGED ******************************************************************************************************************* Defence Construction Canada – Armoured Combat Support Vehicle (ACSV) Project, 3 CDSB Edmonton, Alberta – HQ202106 DEFENCE CONSTRUCTION CANADA (DCC) is requesting Proposals from Design-Build Teams to design and construct the Armoured Combat Support Vehicle (ACSV) at 3 CDSB Edmonton, Alberta, following a modified design-build approach. Additional details are provided in the Request for Proposals (RFP) documents. The Rough Order Magnitude (ROM) Construction Cost Estimate for this Project is $78 Million. Firms that consider themselves qualified to provide these services are invited to submit their Proposals through the MERX Electronic Bidding System on or before the closing date and time indicated on the Electronic Bidding System. This solicitation is being conducted in accordance with the requirements set out in the Canadian Free Trade Agreement (CFTA), Chapter Nineteen of the Canada-European Union Comprehensive Economic and Trade Agreement (CETA) and the World Trade Organization Agreement on Government Procurement (WTO-GPA). The selected Design-Builder will be required to hold a valid Designated Organization Screening (DOS), issued by the Contract Security Program (CSP), Public Works and Government Services Canada (PWGSC). Details concerning the Security Requirements for this project are identified in Amendment No.1. Questions regarding this solicitation are to be directed ONLY to the point of contact identified in this advertisement. Bidders who address their questions to anyone other than the point of contact during the solicitation period may, for that reason alone, be disqualified. Bidders can obtain contract award results from the DCC website at https://www.dcc-cdc.gc.ca/industry/contract-activity. DCC now publicly discloses information on payments made to prime contractors so that subcontractors know when they can expect payment. Information on payments made in the past 90 days on construction contracts over $100,000, as well as further information regarding DCC’s prompt payment commitment, can be obtained from the DCC website at https://www.dcc-cdc.gc.ca/industry/contract-activity. code : 1.01description : Design Team Lead Chef de l'équipe de conceptionunitOfMeasure : Hourly Ratecode : 1.02description : Lead Architect Architecte principalunitOfMeasure : Hourly Ratecode : 1.03description : Senior Architect Architecte séniorunitOfMeasure : Hourly Ratecode : 1.04description : Intermediate Architect Architecte intermédiaireunitOfMeasure : Hourly Ratecode : 1.05description : Lead Sustainable Designer Spécialiste principal en conception durableunitOfMeasure : Hourly Ratecode : 1.06description : Senior Sustainable Designer Spécialiste sénior en conception durableunitOfMeasure : Hourly Ratecode : 1.07description : Intermediate Sustainable Designer Spécialiste intermédiaire en conception durableunitOfMeasure : Hourly Ratecode : 1.08description : Lead Structural Engineer Ingénieur en structure principalunitOfMeasure : Hourly Ratecode : 1.09description : Senior Structural Engineer Ingénieur en structure séniorunitOfMeasure : Hourly Ratecode : 1.1description : Intermediate Structural Engineer Ingénieur en structure intermédiaireunitOfMeasure : Hourly Ratecode : 1.11description : Lead Mechanical Engineer Ingénieur mécanique principalunitOfMeasure : Hourly Ratecode : 1.12description : Senior Menchanical Engineer Ingénieur mécanique séniorunitOfMeasure : Hourly Ratecode : 1.13description : Intermediate Mechanical Engineer Ingénieur mécanique intermédiaireunitOfMeasure : Hourly Ratecode : 1.14description : Lead Electrical Engineer Ingénieur électrique principalunitOfMeasure : Hourly Ratecode : 1.15description : Senior Electrical Engineer Ingénieur électrique séniorunitOfMeasure : Hourly Ratecode : 1.16description : Intermediate Electrical Engineer Ingénieur électrique intermédiaireunitOfMeasure : Hourly Ratecode : 1.17description : Lead Civil or Municipal Engineer Ingénieur civil ou municipal principalunitOfMeasure : Hourly Ratecode : 1.18description : Senior Civil or Municipal Engineer Ingénieur civil ou municipal séniorunitOfMeasure : Hourly Ratecode : 1.19description : Intermediate Civil or Municipal Engineer Ingénieur civil ou municipal intermédiaireunitOfMeasure : Hourly Ratecode : 1.2description : Lead Energy Specialist Spécialiste principal en énergieunitOfMeasure : Hourly Ratecode : 1.21description : Senior Architectural or Engineering Technologists/Technician/Draftsperson Technologue, technicien, ou dessinateur sénior en architecture ou en génieunitOfMeasure : Hourly Ratecode : 1.22description : Intermediate Architectural or Engineering Technologists/Technician/Draftsperson Technologue, technicien, ou dessinateur intermédiaire en architecture ou en génieunitOfMeasure : Hourly Ratecode : 1.23description : Project Manager Gestionnaire de projetunitOfMeasure : Hourly Ratecode : 1.24description : Superintendent SurintendantunitOfMeasure : Hourly Ratecode : 1.25description : Industrial Security Manager Responsable de la sécurité industrielleunitOfMeasure : Hourly Ratecode : 1.26description : Lead Commissioning Manager or Commissioning Agent Gestionnaire principal de la mise en service ou agent de mise en serviceunitOfMeasure : Hourly Ratecode : 1.27description : Indigenous Relations Coordinator Coordonnateur des relations avec les AutochtonesunitOfMeasure : Hourly Ratecode : 1.28description : Total Classification Rate Taux Horaire Pondéré TotalunitOfMeasure : Hourly Ratecode : 2description : Maximum Upset Fee for the Contract Award Scope of Services Honoraire maximum pour l’étendue des services visés par l’attribution du contratunitOfMeasure : Dollarcode : 301description : Estimated Cost of Travel for the Contract Award Scope of Services Coût de déplacement estimatif pour l’étendue des services visés par l’attribution du contratunitOfMeasure : Dollarcode : 3.02description : Maximum Upset Unit Travel Rate to 3 CDSB Edmonton Coût unitaire de déplacement maximum vers la BS 3 Div CA EdmontonunitOfMeasure : Tripcode : 4description : Disbursement Rate Taux des déboursratioType : BOTHunitOfMeasure : Percentcode : 5description : Design-Builder Mark-Up Allowance Allocation majorée du concepteur-constructeurratioType : MARKUPunitOfMeasure : PercentBidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS