This Solicitation opportunity from Department Of Defense was posted on July 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
MEASURING TUBE, GAS ANA
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract is for the procurement of measuring tubes for gas analysis, specifically designed to measure carbon dioxide content in compressed gases with a range of 100 to 3000 parts per million per liter of air. The item is identified by NSN 6630-12-189-3126 and is packaged in units of PG, with each package containing ten tubes. The tubes are glass, round, with melted tips, and must comply with strict packaging and labeling standards outlined in DLA’s Medical Marking Standard No. 1, which supersedes MIL-STD-129 for medical acquisitions. Each unit must be individually sealed in a suitable container to prevent damage or breakage, and all shipments must use commercial exterior containers to ensure safe delivery at the lowest cost to designated FPO addresses. The item has a non-extendable shelf life of 24 months, with no more than three months elapsed from date of manufacture to delivery date, and all packaging must clearly display the date of manufacture, expiration or retest date, contract number, and lot number in accordance with MMS1C. The contract is issued under solicitation SPE2DH-26-T-5302 with a response deadline of July 27, 2026, and delivery required within 20 days of order placement. The government will inspect and accept the product at the destination, with FOB destination terms placing transportation responsibility on the contractor. Deliveries are targeted to multiple U.S. Navy vessel locations served through Fleet Post Office addresses, including FPO AE 09588 and FPO AP 96671. All packaging must conform to DLA’s Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951, and palletization must meet RP001. Hazardous material identification, shipping, and labeling must comply with DFARS 252.223-7001 and OSHA’s Hazard Communication Standard, requiring submission of Material Safety Data Sheets pre-award. Ocean transport must use U.S.-flag vessels unless a waiver is granted at least 45 days prior to shipment, with strict reporting requirements for any foreign-flag shipments. The contract includes mandatory clauses on equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, shipping, whistleblower rights, cybersecurity via NIST SP 800-171, and disclosure of information. The solicitation is open to
General Info
Agency
NAICS
Place of Performance
UNIT 100259 BOX 1, FPO, AE, 09588, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
MEASURING TUBE,GAS ANALYZER
FEATURES DRAEGER CARBON DIOXIDE 100/A-P, FOR MEASURING THE CARBON
DIOXIDE CONTENT IN COMPRESSED GASES; MEASURING RANGE: 100 TO 3000 PARTS
PER MILLION FOR 1 LITER OF AIR; GLASS TUBE ROUND WITH MELTED TIPS
UNIT OF ISSUE: PG (10 EACH PER PACKAGE)
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
.. RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a
SPE2DH-26-T-5302
SECTION B
shelf life of 24 months (non-extendable) applies to this item.
SHALL HAVE A SHELF LIFE OF 24 MONTHS. NOT MORE THAN 3 MONTHS SHALL HAVE ELAPSED FROM DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE GOVERNMENT. . SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH THE LATEST REVISION OF MMS1C.
. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE CONTRACT NUMBER/LOT NUMBER. .. ADEQUATE DATA FOR THE NSN/Part Number: 6630-12-189-3126 Quantity: 1 PG Purchase Request: 7017540700QTY: 1 Delivery: 20 days ADO
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS