Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Mechanical Installation Support and Commissioning

Active

Federal

Response Deadline10/28/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Mechanical Installation Support and Commissioning, involves providing on-site technical support and commissioning services for prime contractors at the NASA Langley Research Center in Hampton, Virginia. The scope of work is centered on the B1221 C facility basement, where the contractor is responsible for installation support and the execution of commissioning tests to ensure the proper operation of a 40-ton cement blast door. To achieve this, the contractor will utilize precision alignment and load verification tools to validate the system's functionality. The final deliverables for this project include a fully commissioned operational lift system and a comprehensive final report. The project falls under NAICS code 238990 and is managed through the NASA Shared Services Center.

General Info

Technical support and commissioning for a 40-ton cement blast door at NASA Langley.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

NAICS

238990 - All Other Specialty Trade Contractors

Place of Performance

Hampton, VA, 23681, USA

Set-Aside

NONE

Documents

This scope was carved out of 80NSSC27944391Q.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STAINLESS JACK SCREW

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 26

subcontract

Response DeadlineOct 28

Submission deadline

Response Deadline

10/28/2026, 12:00:00 PM UTCin about 18 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs on-site technical support and commissioning for prime contractors on NASA Langley Research Center facility projects. Conducts installation support in the B1221 C facility basement and performs commissioning tests to verify the operation of a 40-ton cement blast door using precision alignment and load verification tools. Delivers a commissioned operational lift system and report.

Similar Contracts

Same NAICS industry code

PURIFIED WATER REPLENISHMENT SAN JACINTO VALLEY ADVANCED WATER PURIFICATION FACILITY SPECIFICATION NO. 1472W

Solicitation # purified-water-replenishment-san-jacinto-valley-advanced-water-purification-facility-specification-0

The Eastern Municipal Water District is seeking sub-bids for the Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility project located in San Jacinto, California. Managed by J.F. Shea Construction, Inc., this solicitation is specifically targeting qualified Disadvantaged Business Enterprise subcontractors and suppliers across a wide range of NAICS codes, including various construction, specialty trade, and manufacturing sectors. Interested parties must submit their responses by the bid deadline of November 17, 2026, at 10:00 A.M. This opportunity is set aside for SBA-certified entities, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses, as well as Disadvantaged Business Enterprises. Primary coordination for this project is handled by Lori Olivas.

J.F. Shea Construction, Inc.

POSTED

about 2 hours ago

DEADLINE

CONSTRUCTION MANAGER/GENERAL CONTRACTOR (CM/GC) SERVICES FOR DIRECT POTABLE REUSE DEMONSTRATION FACILITY (PHASE 1) RFQ NO. 3002

Solicitation # construction-managergeneral-contractor-cmgc-services-direct-potable-reuse-demonstration-facility

The Metropolitan Water District of Southern California is seeking qualified subconsultants for the Construction Manager/General Contractor services regarding the Direct Potable Reuse Demonstration Facility Phase 1 in Carson, California. This solicitation specifically targets certified MBE, WBE, SBE, DVBE, VOB, and LSA firms, with a focus on SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses, as well as Disadvantaged Business Enterprises. Subconsultant bids are due by October 23, 2026, at 2:00 P.M., preceding the owner bid date of November 3, 2026. The project encompasses a wide range of professional and construction services as indicated by various NAICS codes, including engineering, architectural, and specialized construction management. Interested parties should coordinate through J.F. Shea Construction, Inc. to participate in this infrastructure project.

J.F. Shea Construction, Inc.

POSTED

about 2 hours ago

DEADLINE

On-Call Maintenance and Minor Construction Services

Solicitation # RFP-VC-26-008

The Inland Empire Regional Composting Authority is soliciting proposals from licensed general contractors for a Master Services Contract to provide on-call maintenance and minor construction services in California. The scope of work includes millwright work, welding, fire sprinkler system maintenance, general construction such as framing and concrete, and the repair of conveyors, hoppers, and heavy equipment. The Authority intends to award multiple contracts based on an evaluation of price, payment terms, organizational experience, personnel qualifications, and the proposed work plan. Additional selection factors include the contractor's proximity to the service area and their capacity to provide equipment and staff for emergency work on short notice. Proposals must be submitted electronically via PlanetBids by October 29, 2026, at 3:00 p.m. This is a prevailing wage contract subject to the California Labor Code, requiring contractors to be registered with the Department of Industrial Relations. Key contractual requirements include providing performance and payment bonds for any task order exceeding 25,000 dollars and maintaining insurance coverage of at least 1,000,000 dollars for general liability and auto accidents. Payment is generally issued within 30 days of invoice approval, though an expedited payment protocol is available in exchange for a percentage discount. The contract includes a right to audit for up to 12 months after final payment and stipulates that all disputes be governed by California Code Civil Procedure.

Inland Empire Utilities Agency

POSTED

about 2 hours ago

DEADLINE

Traffic Striping and Pavement MarkingsThis subcontract agreement involves the supply and installation of traffic stripes and signage for prime contractors working on City of Clovis signalization projects. The scope of work includes applying pavement markings using either paint or thermoplastic materials, installing traffic signs with appropriate posts, and placing raised pavement markers. All work must be performed in strict accordance with City of Clovis Standard Specifications Sections 84 and 85. The project is located in Fresno, California, under NAICS code 238990. Interested parties must submit their responses by the deadline of November 17, 2026. The final deliverables for this contract consist of fully completed pavement markings and the successful installation of all required signage.

POSTED

about 3 hours ago

DEADLINE

Bridge Coating and Painting

Texas Department of Transportation

POSTED

about 3 hours ago

DEADLINE

Martin Luther King Jr., Park Pilot Dog Park Project

Solicitation # 20261026021

City of East Palo Alto

POSTED

about 4 hours ago

DEADLINE

DEI-600-27 Windsor Mills Bus Facility - AST and Fuel Dispenser Upgrade (Revised)

Solicitation # DEI-600-27

Solicitation DEI-600-27 is issued by the Board of Education of Baltimore County for the Windsor Mill Bus Facility AST and Fuel Dispenser Upgrade. The project involves the procurement and installation of fuel storage tanks, liquid fuel dispensers, pumps, and related distribution equipment and components. The estimated contract value is between 500,001 and 1,000,000 dollars. To be considered responsive, bidders must be pre-qualified by the Baltimore County Department of Public Works and Transportation under Category O, Classification Number 9 for Fuel Centers prior to the bid opening. The procurement includes a goal of 15 percent participation for Minority Business and Small Business Enterprise organizations, and bidders must submit a Small and Minority Business Enterprise Utilization Affidavit to avoid being deemed non-responsive. Sealed bids must be submitted electronically by November 2, 2026, at 11:00 A.M. local time.

Baltimore County Public Schools

POSTED

about 21 hours ago

DEADLINE

Digital LED Signage Supplier & Installer

Chicago Public Schools

POSTED

about 22 hours ago

DEADLINE

Okaloacoochee Slough WMA Fence Line Project

Solicitation # FWC 26/27-25

The Florida Fish and Wildlife Conservation Commission is soliciting competitive bids for the Okaloacoochee Slough WMA Fence Line Project in Hendry County, Florida. The scope of work includes the removal of approximately 159,600 linear feet of barbed wire fence and the installation of approximately 56,400 linear feet of 4-strand barbed wire and 32,300 linear feet of 3-strand smooth wire. Additionally, the contractor must install 42 sixteen-foot gates and 45 three-foot pedestrian spring back gates, perform right-of-way vegetation clearing 50 feet interior of the fence lines, and complete fire line installation. The project has an estimated budget of 520,000 dollars and an initial contract term of four years, with work required to commence within 30 days of purchase order issuance. Bidders must be registered in the MyFloridaMarketPlace and SunBiz systems. Sealed bids are required by October 20, 2026, at 3:00 pm ET, and digital submissions are strictly prohibited. Award decisions will be based on the bidder's responsiveness and responsibility, with specific unit pricing required for fence removal, installation, clearing, and gates. The contractor is prohibited from subcontracting and must comply with various regulations, including the Build America, Buy America provision, Davis-Bacon Act wage standards for federally funded construction, and strict guidelines regarding the disturbance of wetlands and the prevention of non-native species contamination.

Florida Fish and Wildlife Conservation Commission

POSTED

about 23 hours ago

DEADLINE

Utility Pole Installation and Setting ServicesThis subcontract for Utility Pole Installation and Setting Services involves performing physical installation and setting of utility poles for prime contractors on City of Covington electric infrastructure projects. The scope of work includes excavation, boring, plumbing of poles, and the installation of crossarms utilizing crane and auger trucks to ensure all structures are properly secured and ready for conductor stringing. The selected provider must ensure all work complies with the specific codes and ordinances of the City of Covington. This opportunity is categorized under NAICS code 238990, with a response deadline set for November 24, 2026.

City of Covington

POSTED

DEADLINE

Overhead Door Services (Bid Discount)

Solicitation # 27-P-00016

Solicitation 27-P-00016 is an invitation for bids to establish a fixed firm pricing schedule for the installation, repair, and replacement of overhead doors, openers, and gates for the City of Tampa, Florida. This as-needed contract includes scheduled preventative maintenance for doors, closures, gates, and access control systems. The awardee must provide all necessary labor, tools, and materials, maintaining a minimum of five trained technicians and ensuring 24/7 availability. Emergency responses for police and fire departments are required within the same day of the incident. Specialized services include fire door drop testing and certification in compliance with NFPA 80 standards, with required certification tags and written deficiency reports for failed inspections. The contract is set aside for Small Local Business Enterprises and requires bidders to be licensed in the State of Florida. Evaluation is based on responsiveness and responsibility, including financial condition, experience, and insurability. Award may be granted to multiple bidders by division or aggregate total. Performance occurs at various city locations, including fire stations and fleet maintenance facilities, with specific port pass requirements for The Port at Tampa. Compliance requirements include the Davis-Bacon Act for prevailing wages, OSHA safety standards, and a minimum of 1 million dollars in insurance coverage. Bids must be submitted electronically via the OpenGov portal by November 16, 2026, and must include specific DMI forms and certifications to be considered responsive.

LAM - Facilities

POSTED

DEADLINE

Fire-Stopping and Penetration SealingThis subcontract for the University of Mississippi Medical Center involves the supply and installation of fire-rated seals and materials for facility projects. The scope of work requires the application of intumescent sealants, fire-rated caulk, mineral wool, pillows, and collars to maintain the fire ratings of walls and floors at all pipe and cable penetrations. All work must be performed using UL-listed firestop systems and must strictly comply with ASTM E814 standards to ensure the delivery of certified fire-stopped penetrations. The solicitation was posted on October 26, 2026, with a response deadline of November 24, 2026, falling under NAICS code 238990.

UNIV of MS MEDICAL CENTER

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Transient hot wire liquid thermal conductivity meter to support material compatibility and property testing for explosive materials.

Solicitation # 80NSSC27946410Q

Other Measuring and Controlling Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

Yateks 3D video borescope system

Solicitation # 80NSSC27946179Q

Solicitation 80NSSC27946179Q is a firm-fixed-price contract opportunity issued by the NASA Shared Services Center for the procurement of a Yateks 3D video borescope system for the Goddard Space Flight Center. This is a brand-name requirement specifically for the Yateks Realta 3D system, which includes the iShot Imaging E Series Monitor Kit (PN: EM10418). The system was selected for its specialized capabilities, including motorized 360-degree articulation, forward-facing stereo 3D measurement, and full-HD imaging. The procurement is set aside for small businesses under NAICS code 334519, with delivery expected within one to two weeks after receipt of order. Shipping is FOB Destination to Greenbelt, Maryland. The award will be granted based on the lowest price technically acceptable (LPTA) criteria. To be eligible, responses must be submitted by authorized resellers only and must include a letter of authorization and proof of manufacturer pricing. Offerors must be registered in the System for Award Management (SAM) and include their CAGE code or Unique Entity ID on the proposal. All quotes are due by October 22, 2026, and must be submitted via email to Cody Guidry. The contract includes specific requirements for duty-free entry marking and strict compliance with U.S. export control laws, including ITAR and EAR regulations.

Other Measuring and Controlling Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

ABAR Vacuum Furnace Calibration Services

Solicitation # 80NSSC27947871Q

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 6 hours ago

DEADLINE

Supply of RED Digital Cinema V-RAPTOR [X] Z Mount CamerasThis subcontract through the NASA Shared Services Center involves the procurement and delivery of two RED Digital Cinema V-RAPTOR [X] Z Mount Cameras. These professional cinema cameras are intended for prime contractors working on projects at the Kennedy Space Center. The acquisition is handled as a commercial item purchase governed by FAR Part 12 under NAICS code 423610. Interested parties must provide a capability statement proving their ability to source this specific hardware. The selected provider is responsible for the sourcing and final delivery of the completed hardware shipment directly to the NASA Kennedy Space Center.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Direct Drive Couplings and Limit SwitchesThis subcontract through the NASA Shared Services Center involves the provision of specialized coupling hardware and electronic limit switches for prime contractors working on facility projects at the NASA Langley Research Center in Hampton. The scope of work focuses on delivering industrial-grade limit switches compatible with existing motor systems and direct drive couplings featuring a 32:1 gear ratio, along with necessary protective shields. Classified under NAICS code 333318, the agreement ensures the delivery of critical mechanical components to support agency infrastructure. The opportunity was posted on October 26, 2026, with a response deadline set for October 28, 2026.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

in about 18 hours

Custom Stainless Steel Lifting Screw Jacks (50-Ton Capacity)This subcontract through the NASA Shared Services Center involves the manufacture and supply of custom-engineered, heavy-duty stainless steel lifting screw jacks for prime contractors working on NASA Langley Research Center facility projects in Hampton. The required hardware must feature a 50-ton vertical lift capacity, a minimum travel length of 150 inches, and clevis ends. To ensure operational integrity and safety, the jacks must integrate bearing supports equipped with protective boots designed to prevent foreign object debris entry. This specialized fabrication effort falls under NAICS code 333998 and focuses on delivering high-capacity lifting solutions tailored to the specific technical requirements of the research center.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

in about 18 hours

ICN-LHT-1G Lunar Regolith Simulant Supplier

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

in about 2 hours

High-Temperature Thermal Analysis (Diffusivity and Specific Heat)

Testing Laboratories and Services

POSTED

DEADLINE

in about 2 hours

Tubing Fittings & installation Hardware

Solicitation # 80NSSC27947142Q

The NASA Shared Services Center is soliciting quotes for a firm-fixed-price contract to procure 316SS tubing fittings and installation hardware in support of the E3 Component Test Bed Project at the Stennis Space Center in Mississippi. This procurement is set aside for small businesses under NAICS code 332510. The required hardware includes various sizes of AN, MP, and HP unions and crosses, with specific material mandates such as virgin PTFE O-rings and copper crush washers. All AN fittings must comply with SAE AS4841, AS4842, AS4843, or AS4875 standards, while MP and HP fittings must adhere to ASME B31.3 Chapter IX. Award will be granted to the responsible offeror with the lowest price technically acceptable offer. To be considered, quotes must be comprehensive, as partial quotes will not be accepted, and must include all applicable shipping costs. Deliveries are required FOB Destination to the Stennis Space Center no later than 12 weeks after contract award, and the vendor must provide a Certificate of Conformance. Offerors must be registered in the System for Award Management and comply with all applicable FAR and NFS clauses, including export control laws such as ITAR and EAR.

Hardware Manufacturing

POSTED

DEADLINE

FLOWMETER, CALIBRATION, AND SIGNAL CONDITIONERS NEEDED FOR PANEL MODIFICATION FOR ESR

Solicitation # 80NSSC26946800Q

Solicitation 80NSSC26946800Q is a brand-name, firm-fixed-price request for quotation issued by the NASA Shared Services Center, set aside for small businesses under NAICS code 334513. The objective is to procure specific hardware to support the Orion scrubber purge capability at the Multi-payload Processing Facility and to integrate redundant flowmeters into the Cabin Air Supply Panel for real-time SCFM measurement. Key deliverables include six turbine flow meters (OEM Part FT-08AER1-GEA-2), six corresponding calibrations in air at 293 PSIA, and signal conditioners (OEM Part TWA-A-9-00-IS) featuring explosion-proof enclosures. Performance will take place at the Kennedy Space Center, specifically within the Vehicle Assembly Building on the Mobile Launcher and the Multi-payload Processing Facility, with a performance date of October 25, 2026. The government will award the contract based on the lowest price technically acceptable offer. Technical requirements mandate compliance with KSC Drawing 79K03436 and various governmental specifications regarding electrical sealing, electromagnetic interference, and butt weld hubs. Quality assurance follows ISO 9000 standards, with initial inspections conducted at the contractor's plant and final acceptance occurring at Kennedy Space Center. Delivery is specified as FOB Destination. Offerors must be registered in the System for Award Management and submit quotes by October 22, 2026. Special requirements include adherence to Sensitive But Unclassified information protocols and the provision of prototype samples if requested by the Contracting Officer.

Testing Laboratories and Services

POSTED

DEADLINE

in about 3 hours

PerkinElmer Spectrum 3 Dual Range Spectrometer OR EQUIVALENT

Solicitation # 80NSSC27944070Q

The NASA Shared Services Center, on behalf of the NASA Langley Research Center, is soliciting quotes for a PerkinElmer Spectrum 3 Dual Range Mid-infrared (MIR) and Near-infrared (NIR) Fourier transform infrared (FTIR) Spectrometer or an equivalent system. This procurement is a small business set-aside under NAICS code 334516 and is being awarded as a firm-fixed-price contract for commercial items. The required system must be a single integrated platform featuring automated range switching, sealed and desiccated optics, and specific performance capabilities, including a MIR signal-to-noise ratio better than 50,000:1 RMS for a 5-second acquisition and wavenumber accuracy of 0.02 cm-1 at 2,000 cm-1. The acquisition includes the spectrometer, a Windows 11 workstation with a minimum 24-inch monitor, instrument control and data analysis software, and specialized accessories such as an ATR accessory, an NIR reflectance accessory, and an ATEX-compliant NIR 60mm spinner. The contract will be awarded to the responsible offeror based on the lowest price technically acceptable (LPTA) criteria, provided the offer meets all technical specifications and requirements. Delivery is specified as FOB Destination to the NASA Langley Research Center in Hampton, Virginia, with a period of performance of 30 days after receipt of order. Offerors must be registered in the System for Award Management (SAM) to be eligible for award. All quotes must be submitted electronically to the primary point of contact, Lindsey McLellan, by the specified deadline. The solicitation incorporates various FAR and NFS clauses, including those regarding sustainable products, personal identity verification, and the unenforceability of unauthorized obligations.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Institute of Electrical & Electronics Engineers Subscription Renewal

Solicitation # 80NSSC27IEEE

Libraries and Archives

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS