Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Medical Device Packaging and Labeling Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves providing secondary packaging, labeling, barcoding, and kitting services for iFOBT test units in compliance with FDA and Department of Veterans Affairs requirements. The scope includes the incorporation of multilingual inserts and adherence to Unique Device Identification (UDI) standards to ensure regulatory compliance and facilitate proper device tracking. The work focuses on medical device packaging and labeling services under the NAICS code 323111, which pertains to commercial printing. The contract is managed by the Department of Veterans Affairs through the 248-NETWORK Contract Office 8 (36C248) and is structured as a subcontract agreement. While specific location details for the place of performance and points of contact are not provided, the services must meet all applicable federal guidelines to support the distribution and use of these diagnostic test units within VA healthcare settings.

General Info

Provide secondary packaging, labeling, barcoding for iFOBT tests meeting FDA and VA regulatory compliance.

Agency

Department Of Veterans Affairs → 248-NETWORK Contract Office 8 (36C248)

NAICS

323111 - Commercial Printing (except Screen and Books)

Place of Performance

FL

Set-Aside

NONE

Documents

This scope was carved out of 36C24825Q0540.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

6515--Automated iFOBT CPT- OY1

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedApr 22

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 248-NETWORK Contract Office 8 (36C248)

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Veterans Affairs → 248-NETWORK Contract Office 8 (36C248)

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Secondary packaging, labeling, barcoding, and kitting of iFOBT test units per FDA and VA requirements, including multilingual inserts and UDI compliance.

Similar Contracts

Same NAICS industry code

Military Barcode Labeling and TaggingThis subcontract through C AND T SUPPLY CHAIN for the Department of Defense involves the supply and attachment of military barcode tags for prime contractors operating under DLA Troop Support supply contracts. The scope of work requires the thermal transfer printing of 13-digit NSN and 12-digit UPC barcodes on 100-pound bleached sulfate paper. All tagging operations must strictly adhere to MIL-STD-129 and MIL-STD-2073-1E standards to ensure compliance with military specifications. The project is categorized under NAICS code 323111 and will be performed in Virginia Beach. The contract requires the delivery of items that have been individually bar-coded and tagged. Interested parties should note the response deadline of November 9, 2026.

C AND T SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

Supply of Reflective Sheeting (Yellow)This subcontract involves the supply of yellow reflective sheeting for prime contractors supporting Defense Logistics Agency contracts. The required material must be 8 inches wide and 7-8 mil thick, adhering strictly to ASTM D4956-19 Type 1, Class 1 standards. The scope of work includes the delivery of one 50-yard roll of sheeting along with a Certificate of Quality Compliance as specified in the contract data requirements. All materials must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. The performance of this contract is designated for FPO 96310-7161. Interested parties should note the response deadline of November 9, 2026, and ensure all quality compliance documentation is provided upon delivery.

Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

Supply of Labels (NSN 7690-01-575-1522)This subcontract involves the manufacture or sourcing of 28 units of labels under NSN 7690-01-575-1522 to support prime contractors delivering DLA Troop Support contracts. The work is managed by the Department of Defense through Depot Oklahoma, with the place of performance located at Tinker AFB. The selected provider must ensure all labels meet specific technical specifications and adhere to DLA RP001 quality requirements. Packaging must comply with ASTM D3951 and MIL-STD-129 standards, and the contractor is required to maintain compliance with the Buy American Act. Responses to this opportunity are due by November 9, 2026.

POSTED

about 2 hours ago

DEADLINE

Manufacture and Supply of Labels (NSN 7690-01-484-1679)

DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

Identification Marker Supplier

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE8E6-27-T-0442

Solicitation SPE8E6-27-T-0442 is a request for quotations for the procurement of 156 units of labels, identified by NSN 7690-01-484-1679 and part number 7018912296. The items must be manufactured in accordance with Technical Data Package Rev A Gen 1 and Basic Drawing NR 53711 5760565 Revision C. Delivery is required within 36 days of award, with a need ship date of October 28, 2026, and an original required delivery date of January 25, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-STD-130N for military property identification. Specific requirements include a 24-month non-extendable shelf life (RS001) and a prohibition on the use of asbestos and the intentional addition of mercury. Quality assurance will be conducted using MIL-STD-1916 or ASQ H1331 zero-based sampling plans. Administratively, the contract requires the use of the Wide Area WorkFlow system for invoicing and incorporates CMMC Level 2 Self-Assessment and various FAR/DFARS clauses regarding cybersecurity, HUBZone small business preferences, and domestic material restrictions such as the Buy American Act and Berry Amendment.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

MARKER, IDENTIFICATION

Solicitation # SPE8E6-27-T-0453

Solicitation SPE8E6-27-T-0453, issued by the Defense Logistics Agency, is for the procurement of identification markers under NSN 7690-01-675-6387. The requirement is split across three CLINs with total quantities of 13 units to be delivered to the USS Bulkeley (DDG 84), USS Gabrielle Giffords (LCS 10), and USS Comstock (LSD 45). The items are designated as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 20 days after order, with an original required delivery date of October 26, 2026. Terms are FOB Destination, and inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and special marking code 32 for shelf-life identification. Palletization must comply with DLA requirement RP001. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, NIST SP 800-171 assessment requirements, and hazardous material labeling standards. Invoicing and payment processing must be handled through the Wide Area WorkFlow system. Tasha Robinson serves as the primary contracting contact for DLA Troop Support Construction and Equipment.

Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE8E5-27-T-0342

Solicitation SPE8E5-27-T-0342 is a request for quotations issued by the DLA Troop Support Construction and Equipment office for the procurement of 28 units of labels, identified by NSN 7690-01-575-1522. The contract specifies a delivery timeline of 6 days after award, with a need ship date of November 16, 2026, and an original required delivery date of December 11, 2026. Shipping is established as FOB Origin, with the final destination being the DLA Distribution Depot Oklahoma at Tinker AFB. Inspection and acceptance will both occur at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List technical and quality requirements, specifically RP001, take precedence. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment processing. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and prohibitions on certain telecommunications equipment. Evaluation may be conducted via an automated award process, and the NAICS code for this acquisition is 323111.

POSTED

about 2 hours ago

DEADLINE

MARKER, IDENTIFICATION

Solicitation # SPE8E6-27-T-0458

Solicitation SPE8E6-27-T-0458 is a request for quotations issued by DLA Troop Support, Construction and Equipment (Class IV) for the procurement of 186 identification markers, identified by NSN 7690-01-693-0147. The requirement is categorized under NAICS code 323111. The need ship date is October 28, 2026, with an original required delivery date of January 10, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution Warner Robins in Georgia. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging and labeling must comply with MIL-STD-129, and palletization must follow RP001 requirements. Invoicing and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system. Key regulatory requirements include compliance with the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and various socio-economic representations. Quotations are due by November 9, 2026.

POSTED

about 2 hours ago

DEADLINE

MARKER, IDENTIFICATION

Solicitation # SPE8E6-27-T-0431

Solicitation SPE8E6-27-T-0431 is a request for quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment office for the procurement of 40 identification markers, identified by NSN 7690-01-630-9293. The requirement is for a quantity of 40 units with a required delivery date of October 22, 2026, and a delivery timeline of 20 days after order. The contract is established as FOB Origin, with both inspection and acceptance occurring at the destination, specifically Joint Base Anacostia, DC. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Palletization must comply with RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act, hazardous material labeling standards, and cybersecurity reporting requirements. Offers are to be submitted via DIBBS, and the government may apply a HUBZone price evaluation preference during the award process.

Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

Large-Format Printing and Exhibit FabricationThis subcontract opportunity with the Department of Transportation focuses on the supply and installation of large-scale printed materials and physical exhibit structures for prime contractors. The scope of work includes large-format printing, plotting, exhibit design, and physical construction, utilizing specialized digital creasing, flatbed cutting, and mounting equipment in accordance with NASA CMR guidelines. Deliverables consist of physical large-format prints, mounted displays, and fully constructed exhibits. The project is designated as a set-aside for SBA Certified Women-Owned Small Businesses under NAICS code 323111. Performance will take place in Washington, DC. Interested parties must submit their responses by the deadline of December 4, 2026.

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Commercial Printing Services for Fishing Regulations GuideThis subcontract opportunity is for commercial printing services to produce the New York State Freshwater Fishing Regulations Guide for prime contractors working with the NYS Department of Environmental Conservation. The selected provider will be responsible for the professional printing and binding of multi-page guides, utilizing high-volume digital or offset presses and durable paper stock to ensure a high-quality finished product. The project requires full booklet binding and finishing, with a preference for vendors holding MWBE certification. Interested parties must submit their responses by December 1, 2026, to provide these specialized printing and delivery services under NAICS code 323111.

NYS Department of Environmental Conservation

POSTED

about 15 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Veterans Affairs → 248-NETWORK Contract Office 8 (36C248)

Same awarding agency

5680--FY27 NRM (PROJ 573-24-110) BB - Expand Cardiology Service

Solicitation # 36c24826r0124

Solicitation 36C24826R0124 is a firm-fixed-price requirements contract issued by the Department of Veterans Affairs Network Contracting Office 8 for the renovation and expansion of the Cardiology service administrative space at the Malcom Randall VA Medical Center in Gainesville, Florida. The project involves approximately 6,000 square feet of construction on the third floor of Building 1, encompassing selective demolition, site preparation, architectural finishes, and comprehensive mechanical, electrical, plumbing, fire protection, and technology systems work. The estimated project magnitude is between 2,000,000 and 5,000,000 dollars, with a base performance period of 540 to 548 calendar days from the Notice to Proceed. This procurement is strictly set aside for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB). Award will be determined using a trade-off process where technical factors—including relevant past performance, technical approach, project planning, safety, infection control, quality control, and project schedule—are combined and weighted approximately equal to price. Offerors must submit a bid guarantee of 20 percent of the bid price or 3,000,000 dollars, whichever is less, and provide a current Experience Modification Rate (EMR) of 1.0 or less. Due to the operational hospital environment, strict adherence to ICRA/PCRA controls, safety protocols, and minimal disruption to services is required. The closing date for the receipt of proposals has been extended to November 16, 2026, at 3:00 PM EST.

Commercial and Institutional Building Construction

POSTED

about 7 hours ago

DEADLINE

Emergency Exit Sign Fixture SupplyThis subcontract involves the supply and delivery of nine illuminated emergency exit sign fixtures and all necessary mounting hardware for Department of Veterans Affairs facility projects. The equipment must strictly adhere to VA building specifications and maintain UL Listing or an equivalent safety certification to ensure all electrical standards are met. The project is managed by the Department of Veterans Affairs Network Contract Office 8, with performance taking place in Bay Pines, Florida. Interested parties must respond by November 6, 2026, to provide the required fixtures and fittings under NAICS code 339950.

Sign Manufacturing

POSTED

DEADLINE

Emergency Exit Sign InstallationThis subcontract opportunity involves the installation of nine fully operational illuminated emergency exit signs at the C.W. Bill Young VA Medical Center in Bay Pines, Florida. The selected provider will be responsible for the complete electrical setup, including the installation of conduits, wiring, junction boxes, supports, fittings, and mounting hardware, as well as performing final electrical connections and testing to ensure all fixtures are functional. The project is managed under the Department of Veterans Affairs Network Contract Office 8 and requires a licensed electrical contractor under NAICS code 238210. Interested parties must submit their responses by November 6, 2026, to support prime contractors on this facility project.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Authorized Distributor/Supplier of ForeSite SS Tablet Pressure Mapping System

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Laboratory Operator Training ServicesThe Laboratory Operator Training Services subcontract involves providing comprehensive on-site and off-site training for end users and key operators supporting prime contractors on Department of Veterans Affairs medical laboratory projects. The scope of work focuses on instructing personnel in the operation of analyzers, incubators, and specialized software, while ensuring all staff are fully trained to meet operational requirements. In addition to training, the contractor is responsible for developing Standard Operating Procedures for all assays and maintenance tasks, adhering strictly to manufacturer guidelines and VA clinical standards. The final deliverables for this engagement include a fully trained workforce and a complete set of validated SOPs. The performance of these services is centered in Tampa, Florida.

Professional and Management Development Training

POSTED

DEADLINE

Medical Equipment Installation and MaintenanceThis subcontract for Medical Equipment Installation and Maintenance supports prime contractors on Department of Veterans Affairs medical laboratory projects in Tampa, Florida. The scope of work involves the delivery, installation, and continuous technical maintenance of laboratory hardware, including user-defined calibration and both hardware and software upgrades. All technical services must be performed by manufacturer-certified technicians to ensure compliance and operational efficiency. The contractor is responsible for providing all installed equipment and submitting detailed calibration reports. Additionally, the agreement requires the management of equipment removal and return shipping upon the conclusion of the contract. This effort falls under NAICS code 811211 and is managed through the Network Contract Office 8.

Consumer Electronics Repair and Maintenance

POSTED

DEADLINE

Lab Middleware and Interface ImplementationThe Lab Middleware and Interface Implementation subcontract involves providing software build, validation, and integration services for analyzers on Department of Veterans Affairs medical laboratory projects. The scope of work includes the implementation of bi-directional interfaces, barcode scanners, and result auto-verification rules for up to ten workstations, ultimately delivering a fully validated software system and integrated interface. Performance will take place in Tampa, Florida, under NAICS code 541512. The contractor must adhere to strict regulatory standards, including NARA-compliant data destruction and FAR 52.227-14(d)(1) data rights compliance. The response deadline for this opportunity is November 10, 2026.

Computer Systems Design Services

POSTED

DEADLINE

Microbiology Reagents and Consumables SupplyThis subcontract, managed by the Department of Veterans Affairs Network Contract Office 8, involves the supply of microbiology reagents and consumables for medical laboratory projects in Tampa. The scope of work includes providing calibrators, quality control materials, and disposable consumables necessary for routine blood, fungal, bacterial, and yeast cultures. Specific requirements include the delivery of disposable MALDI-TOF slides and plastic media bottles with a minimum expiration period of six months. The selected provider must ensure a continuous supply of FDA-approved reagents tailored to annual test volumes. This opportunity falls under NAICS code 423460 and was posted on October 27, 2026, with a response deadline of November 10, 2026.

Ophthalmic Goods Merchant Wholesalers

POSTED

DEADLINE

Microbiology Analyzers and Incubators SupplyThis subcontract opportunity with the Department of Veterans Affairs Network Contract Office 8 involves the supply of automated instrumentation for microbial incubation and ID/AST testing. The scope of work requires the delivery and installation of operational equipment, including large and medium capacity redundant analyzers, MALDI-TOF Mass Spectrometry systems, and blood culture incubators with a capacity exceeding 400 bottles. All provided equipment must strictly adhere to FDA guidelines and VA Directive 6550 Appendix A. The project is based in Tampa, Florida, under NAICS code 334516. Interested parties must submit their responses by November 10, 2026.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

6515--ForeSite SS Tablet w/Pressure Mapping Sensor System

Solicitation # 36C24827Q0082

The Department of Veterans Affairs, through Network Contracting Office 8, is conducting market research via a Sources Sought Notice to identify authorized sources for the ForeSite SS Tablet Pressure Mapping System manufactured by ForeSite Medical. This effort is for acquisition planning purposes and is not a formal solicitation. The required system is intended for clinical pressure assessment and treatment and must include the tablet platform, pressure-mapping sensors, sensor packs, chargers, software licenses, cables, and all necessary accessories. Key functional requirements include real-time pressure analysis and visualization, patient data storage and reporting, wireless and wired connectivity, and portable battery-powered operation. All equipment must be new and include the manufacturer's standard warranty. Interested vendors must submit electronic responses in PDF or Word format by October 30, 2026. Submissions must include the company name, address, Unique Entity Identifier, point of contact, and business size or socioeconomic status, such as SDVOSB, VOSB, Small Business, or Large Business. Additionally, respondents must provide documentation proving they are authorized to distribute or resell the ForeSite system, an estimated delivery lead time, and confirmation regarding the new condition and warranty of the product. The place of performance is located in Tampa, Florida, under NAICS code 334510.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Installation of Exit Signs

Solicitation # 36C24827Q0088

The Department of Veterans Affairs, Network Contracting Office 8, has issued a Sources Sought Notice under solicitation number 36C24827Q0088 for the installation of nine illuminated emergency exit signs at the C.W. Bill Young VA Medical Center in Bay Pines, Florida. The project is specifically located within the Laundry Building (Building 13) and is managed by Fire Protection Engineer Dale McDowell. The scope of work requires the contractor to provide all labor, materials, equipment, supervision, and testing necessary to install the fixtures, including all required conduits, wiring, junction boxes, and mounting hardware. A key requirement involves the strategic placement of signs, including low-mounted installations where overhead visibility is obstructed by laundry conveyors or bags, ensuring all work complies with NFPA 101 Life Safety Code Chapter 7.9.2 and applicable electrical codes. This notice is intended for market research and planning purposes to determine the feasibility of a set-aside for Service-Disabled Veteran-Owned Small Businesses, with potential alternatives for Veteran-Owned or other Small Businesses. It is not a formal request for bids or proposals. Interested parties must submit an affirmative response and a capability statement to Michael A. Shook by November 11, 2026. Final acceptance of the project will be based on the fixtures being fully operational, unobstructed, code-compliant, and approved by a government representative following functional testing and the submission of as-built documentation.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

6632--FY27 Microbial Incubation ID and Susceptibility CPT

Solicitation # 36C24827Q0029

The Department of Veterans Affairs is conducting market research through a Sources Sought Notice to identify qualified vendors capable of providing a comprehensive Microbial Incubation, Identification (ID), and Antimicrobial Susceptibility Testing (AST) system for the James A. Haley Veterans Hospital in Tampa, Florida. The requirement includes the delivery and installation of two redundant analyzers—one large capacity and one medium capacity—along with incubators, middleware, and hardware and software for up to ten workstations. Technical specifications require a bi-directional, bar-coded computer interface compatible with VA laboratory systems and specific sensitivity and resolution standards for MALDI TOF systems. The scope also encompasses a continuous supply of reagents, calibrators, and consumables, which must have a minimum shelf life of six months upon delivery. Interested parties must submit a brief capability statement by November 10, 2026, including their SAM Unique Entity ID, socioeconomic status, and evidence of their ability to meet the functional requirements under NAICS code 334516. Respondents should identify available contract vehicles, such as GSA FSS or NASA SEWP, and provide estimated timelines for delivery, validation, and software implementation. The government will evaluate submissions based on technical specifications, manufacturer reputation, and the ability to provide a tiered pricing structure for cost-per-test (CPT) models. This notice is for planning purposes only and does not constitute a formal solicitation; however, it establishes strict requirements for data security, NARA-compliant data destruction, and mandatory personnel training for any future awarded contractor.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Military Item Marking and Labeling (MIL-STD-129 Compliance)

SPRMM1 DLA Mechanicsburg

POSTED

CLOSED

MIL-STD-129 Labeling and Marking Services

Navsup Weapon Systems Support Mech

POSTED

CLOSED

Government-Furnished Property (GFP) / Depot-Level Repairable (DLR) Labeling

Navsup Weapon Systems Support Mech

POSTED

CLOSED

Military Labeling and Marking Services (IUID, SMIC, Shelf-Life)

SPRMM1 DLA Mechanicsburg

POSTED

CLOSED

MIL-STD Packaging, Preservation, and Labeling

SPRMM1 DLA Mechanicsburg

POSTED

CLOSED

Item Unique Identification (IUID) and Data Matrix Marking Services

Navsup Weapon Systems Support Mech

POSTED

CLOSED

Military Marking & Labeling Services

FA8250 Afsc Pzaaa

POSTED

DEADLINE

IUID Marking and Data Matrix Labeling Services

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

CLOSED

Enlisted Booklet - A Guide To Becoming A Marine

Solicitation # EnlistedBookletAGuideToBecomingAMarine460679

Customer Services

POSTED

CLOSED

Container Marking and Labeling Services

Pa DLA Aviation At Philadelphia

POSTED

CLOSED

Military Marking and Labeling Services (MIL-STD-129)

Pa DLA Aviation At Philadelphia

POSTED

CLOSED

Specialized Labeling and Marking

SPRMM1 DLA Mechanicsburg

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS