Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Medical Packaging and Labeling Services

Active

Federal

Response Deadline08/10/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the compliant packaging, labeling, and kitting of compounded sterile agents to meet strict regulatory standards, with requirements including tamper-evident sealing, barcoding, and complete documentation to ensure full traceability and adherence to Veterans Affairs compliance protocols. All activities must be performed in a manner that maintains sterility, integrity, and accountability throughout the packaging lifecycle, supporting safe and lawful distribution across VA facilities. This subcontract is issued by the Department of Veterans Affairs through the 256-NETWORK Contract Office 16 and requires performance at a location in Shreveport, with a zip code of 71101. The NAICS code 325998 indicates it falls under other pharmaceutical and medicine manufacturing. The opportunity was posted on July 27, 2026, and responses are due by August 10, 2026, at 3:00 PM. There is no set-aside classification specified, and no point of contact information is provided within the data.

General Info

Packaging, labeling, and kitting of sterile agents per VA compliance at Shreveport, 71101, with tamper-evident, barcoded, traceable processes.

Agency

Department Of Veterans Affairs → 256-NETWORK Contract Office 16 (36C256)View Agency

NAICS

325998 - All Other Miscellaneous Chemical Product and Preparation ManufacturingView NAICS

Place of Performance

Shreveport, MS, 71101

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 03:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 256-NETWORK Contract Office 16 (36C256)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 256-NETWORK Contract Office 16 (36C256)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Compliant packaging, labeling, and kitting of compounded sterile agents, including tamper-evident sealing, barcoding, and documentation to support traceability and VA compliance.

Similar Contracts

Same NAICS industry code

Supply of Non-Exempt Hazardous MaterialsThe contract pertains to the manufacture or supply of hazardous materials that are not exempt under statutory exceptions, requiring full submission of Safety Data Sheets and strict adherence to GHS-compliant labeling standards. All materials must meet regulatory safety and communication requirements to ensure proper handling, storage, and transport. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the SBA, with a NAICS code of 325998 indicating classification under other chemical product and preparation manufacturing. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, and is managed by the Department of Defense through its Land Supply Chain office. Performance location and specific point of contact details are not provided, but the opportunity is accessible via the DIBBS portal for qualified small business vendors to submit responses.

LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

Supplier of NSN 2920015959464 (Primary Item)The contract seeks a supplier to provide NSN 2920015959464, an industrial consumable item likely classified as a solvent, lubricant, or hydraulic fluid, with strict adherence to all labeling, packaging, and hazardous materials documentation requirements. The item must meet full regulatory and military standards for handling, transportation, and inventory compliance. Performance is designated at Tinker Air Force Base with a ZIP code of 73145-8000, indicating the delivery location and operational context within a Department of Defense facility. The solicitation is structured as a subcontract under NAICS code 325998, which pertains to other chemical product and preparation manufacturing, and is issued by the Land Supply Chain organization under the U.S. Department of Defense. The posting date is July 28, 2026, with a response deadline of August 10, 2026, allowing suppliers a two-week window to submit proposals. The contract does not specify a solicitation number or set-aside details, suggesting it may be part of a broader master agreement or indirect procurement process. All submissions must ensure complete compliance with hazardous materials regulations and defense logistics protocols to meet the stringent demands of military supply chains. The official point of contact is not listed, and all inquiries must be directed through the provided DIBBS link for procedural guidance and documentation submission.

LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

Sustainable & Environmentally Compliant Materials SupplyThe contract mandates the supply or substitution of environmentally sustainable materials, including lubricants, coatings, and packaging components, in full compliance with the DFARS clause 52.223-23 – Sustainable Products. It is issued as a subcontract under the NAICS code 325998 by the Fluid Handling Division of the Department of Defense, with performance required in Norfolk, Virginia, ZIP 23511. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and emphasizes the use of materials that meet federal sustainability standards, ensuring reduced environmental impact throughout the product lifecycle. All submitted materials must align with the Department of Defense’s procurement policies on green purchasing and environmental stewardship.

FLUID HANDLING DIVISION

POSTED

about 22 hours ago

DEADLINE

Supply of Industrial Pressure Cleaner (Hazardous Material)The contract seeks the procurement and delivery of a commercial pressure cleaner identified by NSN 4940014979549, designed to meet stringent military packaging, hazard communication, and safety standards. This item, classified under NAICS code 325998, is part of a total small business set-aside under the SBA program, ensuring exclusive eligibility for small businesses to compete. The equipment must comply with all applicable regulations governing hazardous materials, including labeling, documentation, and safe handling procedures, to ensure operational readiness and personnel safety within Department of Defense environments. The solicitation is managed by the Fluid Handling Division under the Department of Defense, with a response deadline of August 10, 2026, and was posted on July 28, 2026. The contract type is a subcontract, indicating it may be awarded as part of a larger procurement framework. Although specific performance location and point of contact details are not provided, the requirement is for full delivery in accordance with military specifications. Bidders must ensure compliance with all technical, logistical, and regulatory mandates associated with the NSN and hazardous material handling to qualify for award.

FLUID HANDLING DIVISION

POSTED

about 22 hours ago

DEADLINE

Supply of Oxygen Removal Cartridges with Hazardous Material ComplianceThe contract encompasses the supply and delivery of oxygen removal cartridges identified by NSN 4610016209860, specifically tailored for use aboard the USS RONALD REAGAN CVN 76. All items must be packaged and labeled in strict compliance with regulatory standards, including proper hazardous material handling procedures to ensure safe transportation and onboard storage. The requirement emphasizes adherence to defense logistics protocols, with performance focused on fidelity to technical specifications and regulatory compliance throughout the supply chain. Delivery is to be made to a military postal address in FPO with ZIP code 09587, and all shipments must conform to hazardous materials protocols as mandated by department of defense standards. This subcontract, issued under NAICS code 325998, is managed by the Defense Logistics Agency under the Department of Defense, with a response deadline of August 10, 2026, and a posted date of July 28, 2026. The solicitation is administered through the DIBBS platform and requires proposers to meet all contractual obligations related to hazardous material identification, packaging integrity, and labeling accuracy. No set-aside provisions are specified, and the contract seeks qualified vendors capable of fulfilling military-grade requirements under time-sensitive conditions for critical shipboard systems.

Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

FLUX, SOLDERINGThis contract specifies the procurement of silver solder paste, RMA type, in accordance with ASTM B32, delivered in 8-ounce units (BT), with a total quantity of four units. The item is identified as a commercial product and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including packaging requirements per MIL-STD-2073-1E and MIL-STD-129 for marking, with specific emphasis on shelf-life labeling (Type II, 12-month shelf life, extendable) and passive RFID tagging where applicable. The product must retain at least 85 percent of its shelf life—equivalent to 10 months or three quarters—at the time of delivery to the government, and must be packaged in glass or plastic jars conforming to PPP-C186, following ASTM-D3951-15 for commercial packaging while yielding to MIL-STD-129 for all labeling requirements including barcoding and MSL. The contractor is required to submit Safety Data Sheets (SDS) compliant with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) and corresponding GHS-compliant labels prior to award, along with employee training on these requirements. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for specific functional components like sensors or batteries, and when present, must have secondary containment as mandated by NAVSEA. Packaging must conform to DLA palletization standards, and all shipments must be delivered FOB destination within 20 days of contract award, with no variance allowed in quantity. Delivery is designated to USS ESSEX LHD 2 at FPO AP 96643, with shipment tracking required via traceable methods—parcel post is forbidden. The contract explicitly prohibits identification of sensitive materiel on external markings and mandates strict adherence to identification marking standards including UII 2D barcoding on all packaging levels.

Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

DECALThis contract issued by the Defense Logistics Agency (DLA) under solicitation number SPE8E6-26-T-3882 pertains to the procurement of 64 units of a Type I shelf-life item identified by NSN 7690-01-617-0384 and part number EP-0010909. The item has a non-extendable shelf life of 24 months and must be packaged in full compliance with MIL-STD-2073-1E, including specific packaging methods, preservation techniques, and marking requirements per MIL-STD-129, with special labeling indicating its Type I shelf-life classification. All packaging and palletization must adhere to DLA’s packaging requirements, and the delivery is FOB origin with no quantity variance allowed. Inspection and acceptance occur at the destination, and the item must be delivered to the specified receiving warehouse in Tracy, California by 146 days after award, with a required ship date of January 4, 2027, and original delivery deadline of February 11, 2027. The unit price is $64.00 per unit, resulting in a total contract value of $4,096.00. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which governs compliance unless amended. Transportation directives reference DLA procedural notes C19 and C20, and the unit of issue is the each (EA). The contractor, INDEPENDENT ROUGH TERRAIN CENTER LLC, must ensure all items are clearly marked and packaged as specified, with government identification removed from non-accepted supplies if applicable. The contract includes special handling and preservation protocols, requiring dry, sealed packaging with no cushioning or dunnage. All deliveries must be addressed to the designated DLA receiving facility in Tracy, CA, and the point of contact for the contract is Tai Nguyen, reachable via phone and email. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, under NAICS code 325998 for other miscellaneous chemical product and preparation manufacturing.

DLA DIST SAN JOAQUIN

POSTED

about 22 hours ago

DEADLINE

CORROSION REMOVINGThe contract solicits a corrosion removing compound designated as a commercial off-the-shelf (COTS) item under NSN 6850-01-385-1326, with a quantity of two cans, each containing five gallons, to be delivered FOB destination within 20 days of order issuance, with a required delivery date of July 14, 2026. All supplies must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging standards per MIL-STD-2073-1E and MIL-STD-129 for marking and labeling, with paper labels explicitly prohibited. Packaging must be palletized according to DLA Packaging Requirements for Procurement, and hazardous materials must adhere to IP025 guidelines and GHS labeling requirements. The compound must not contain intentional mercury or mercury compounds except for specific exceptions such as functional uses in batteries, instruments, or reagents specified by NAVSEA, and any portable mercury-containing devices must be shock-proof with a secondary containment barrier. Safety Data Sheets and OSHA-approved hazard warning labels must be reviewed and approved by technical personnel prior to award, submitted to the contract file, and forwarded to the DLA Aviation HMIRS Office (VBA). Sampling and inspection are to be conducted at the destination using either MIL-STD-1916 or ASQ H1331 Table 1 with a zero non-conformance acceptance criterion, where critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The item has no shelf life requirement, and the unit of issue is CAN (CN). Delivery address is Beachmaster Unit 2 in Virginia Beach, Virginia, with shipment required by the fastest traceable means excluding parcel post. Compliance with FAR and DFARS clauses related to employment equity, trafficking in persons, hazardous materials identification, sustainable products, cybersecurity (NIST SP 800-171), subcontracting for commercial items, and whistleblower rights is mandatory. The contract specifies no pricing data, and the type of contract is undefined, though the absence of price details suggests an LPTA evaluation methodology. Offerors must provide their Unique Entity Identifier and CAGE code, certify size status and socioeconomic eligibility if applicable, and comply with all DIBBS submission protocols for electronic proposals. The Government retains

ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

CLEANING SOLVENT, GEThe contract is for the procurement of Cleaning Solvent, GE, identified by NSN 7930013670994 and part number P28288-16OZB-P-1, with a mandatory shelf life of 12 months that cannot be extended. The item is classified as a Type I (Code H) hazardous material, requiring strict compliance with MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA packaging guidelines. All shipments must adhere to IP025 regulations for hazardous materials and be palletized according to DLA specifications. The solvent is ordered in three separate line items totaling 11 boxes, with delivery required within five days of shipment under FOB destination terms and no quantity variance allowed. Inspection and acceptance occur at the delivery point. Three distinct delivery locations are specified: RAF Mildenhall in the UK, NAS Oceana in Virginia, and the Naval Air Warfare Center in Maryland, each with unique mailing and freight addresses, TCN identifiers, and RDD shipment codes. The contract enforces exact packaging codes, preservation methods, and prohibits parcel post delivery, mandating the fastest traceable shipping methods. The solicitation number is SPE8E5-26-T-3707, issued by the Defense Logistics Agency under a federal procurement, with technical and quality requirements governed by the DLA Master List, and the original required delivery dates range from November 28, 2025, to December 3, 2025.

Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

FLUX, SOLDERINGThe contract specifies the procurement of FLUX, SOLDERING in a quantity of 2 BT, with each BT equivalent to 4 OZ, under NSN 3439-00-250-2629, for delivery within 20 days after award. The product is classified as a DOT Class 8 Corrosive Material with a shipping name of HYDROCHLORIC ACID MIXTURE, and manufacturers must ensure correct classification if their product differs. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation issue date for large acquisitions or award date for simplified acquisitions. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with verification levels of VII, IV, and II for critical, major, and minor attributes respectively, or AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. Zero non-conformances are required in sample lots unless otherwise stated. The product must be marked in accordance with MIL-STD-130N for identification of U.S. military property. The solicitation, issued by the Defense Logistics Agency under number SPE8E6-26-T-3885, was posted on July 28, 2026, with a response deadline of August 10, 2026, and is procured as fully competitive under a federal specification. Primary point of contact is Brett Scull, reachable via email and phone provided.

Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

Supply and Delivery of De-Icing SaltThe contract entitled Supply and Delivery of De-Icing Salt seeks qualified contractors to provide on-demand bulk rock salt and liquid de-icers for winter weather response along IH-820 in Texas. Contractors must manage the full logistics chain including storage, load-out, and transportation of materials to TxDOT maintenance locations as needed during inclement weather events. The solicitation is open for responses until August 20, 2026, with submissions required through the Texas SmartBuy portal. This is classified as a subcontract under NAICS code 325998, indicating it pertains to other chemical product and preparation manufacturing, and is procured by the Texas Department of Transportation. Performance is exclusively tied to the IH-820 corridor, and contractors must be prepared to deliver materials promptly and reliably to support continuous road safety operations during winter conditions.

Texas Department of Transportation

POSTED

about 23 hours ago

DEADLINE

Anti-Icing Liquid Chemical SupplyThe contract is for the supply of liquid anti-icing agents, including calcium chloride and brine solutions, to be used by the Texas Department of Transportation to prevent ice from adhering to roadways during winter conditions. The solicitation is structured as a subcontract and is open for responses until August 20, 2026, with the opportunity posted on July 28, 2026. The North American Industry Classification System code associated with this procurement is 325998, indicating it falls under miscellaneous chemical product manufacturing. The contract is administered by the Texas Department of Transportation under the state agency designation of Texas, with the performance location expected to be statewide across Texas roadways. While specific delivery locations and point of contact details are not provided, the contract is accessible through the TxSmartBuy procurement portal for interested vendors to review submission requirements and participate in the bidding process.

Texas Department of Transportation

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Veterans Affairs → 256-NETWORK Contract Office 16 (36C256)

Same awarding agency

J044--Annual Boiler Inspection & Testing

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 3 hours ago

DEADLINE

Technical Documentation and Manuals ProvisionThe contract seeks the development and delivery of comprehensive technical manuals for operation, maintenance, and troubleshooting, ensuring full compliance with VAAR 852.211-70 and Section 508 accessibility standards. These manuals must be precisely structured to support end-user functionality, meet federal documentation requirements, and provide clear, accessible guidance for individuals with disabilities, including those using assistive technologies. The deliverables are critical for maintaining operational readiness and regulatory alignment within Department of Veterans Affairs systems. This is a subcontract under NAICS code 541830, issued by the 256-NETWORK Contract Office 16 (36C256), with a response deadline of August 7, 2026. The work will support government operations but the specific location of performance is not designated. Interested parties must submit proposals prior to the deadline, and all documentation must adhere strictly to federal accessibility mandates and the stipulated regulatory framework. There is no set-aside designation, and the procurement is open to qualified subcontractors capable of delivering high-quality, compliant technical manuals under tight federal standards.

Media Buying Agencies

POSTED

DEADLINE

Clinical Training for VA Medical StaffThe contract is for hands-on clinical training of VA physicians, nurses, and technicians focused on the operation, interpretation, and maintenance of an esophageal catheter system. The training is designed to ensure medical staff are fully competent in using the device in clinical settings, emphasizing practical skills over theoretical instruction. This subcontract is part of a broader effort to enhance patient care through improved technical proficiency among VA healthcare teams. The solicitation was posted on July 28, 2026, with a response deadline of August 7, 2026, at 5:00 PM. The North American Industry Classification System code is 611519, indicating the work falls under other schools and instruction services, specifically related to professional and management development training. The contract is managed by the Department of Veterans Affairs through the 256-NETWORK Contract Office 16 (36C256), and the performance location is not specified, suggesting it may occur at multiple VA facilities across the country. No set-aside designation or point of contact information is provided in the data.

Other Technical and Trade Schools

POSTED

DEADLINE

On-Site Installation and Calibration of Catheter SystemThe contract entails the on-site installation, calibration, and system validation of an esophageal catheter system at a Department of Veterans Affairs medical facility to ensure full operational readiness and technical accuracy. The work requires qualified personnel to perform all necessary procedures in accordance with manufacturer specifications and facility standards, guaranteeing the system is properly configured and validated for clinical use. All tasks must be completed at the designated VA location, with attention to safety, compliance, and minimal disruption to ongoing medical operations. The solicitation is categorized as a subcontract under NAICS code 811212, with a response deadline of August 7, 2026, and was posted on July 28, 2026. The contracting office is the 256-NETWORK Contract Office 16 (36C256), which oversees procurement under the Department of Veterans Affairs. There is no set-aside designation specified, and no point of contact information is provided in the public data. Contractors must be prepared to deliver services in person at the VA facility without prior details on exact location, necessitating further coordination upon award.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Supply of 36-Channel Esophageal CatheterThe contract calls for the supply of a 36-channel esophageal catheter featuring true circumferential sensors with 12 measuring points per sensor and a 4.2 mm diameter, designed to meet stringent technical and regulatory requirements. The device must comply with FDA regulations, ISO 13485 quality management standards, and Veterans Affairs technical specifications to ensure safety, accuracy, and suitability for clinical use within VA facilities. The procurement is structured as a subcontract under the NAICS code 339112, which classifies it within the medical equipment and supplies manufacturing sector. The opportunity was posted on July 28, 2026, with a firm response deadline of August 7, 2026, at 5:00 PM, allowing vendors to submit proposals for fulfillment. The contracting office is the 256-NETWORK Contract Office 16 (36C256), operating under the Department of Veterans Affairs, indicating this procurement is intended to support healthcare systems serving veterans. While specific delivery locations and point of contact details are not provided, the equipment will be used in clinical settings requiring high-fidelity esophageal monitoring, likely for diagnostic or therapeutic applications. Compliance with VA technical standards ensures interoperability with existing infrastructure and adherence to protocols used across VA medical centers. Vendors must demonstrate capacity to deliver fully compliant devices within the specified timeline and meet all regulatory and performance benchmarks outlined in the requirement.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Exterior & Interior Window Cleaning ServicesTwice-annual window cleaning services are required for all exterior-facing and interior entrance windows across eight federal buildings located in Fayetteville, Arkansas, with both accessible and inaccessible areas included in the scope. The work must be performed using non-abrasive cleaning solutions and specialized high-access equipment to ensure safety and prevent damage to glass and surrounding structures. The contract is designated as a Service-Disabled Veteran-Owned Small Business Set Aside under NAICS code 561720, which restricts eligibility to qualifying small businesses owned and controlled by service-disabled veterans. The opportunity was posted on July 28, 2026, with a response deadline of August 4, 2026, and is structured as a subcontract under the Department of Veterans Affairs, managed by the 256-NETWORK Contract Office 16. All work must be conducted at the specified location in Fayetteville with a zip code of 72703.

Janitorial Services

POSTED

DEADLINE

6515--Surgical Instrument Repair ServiceThe Department of Veterans Affairs, through Network Contracting Office 16, is issuing a sources sought notice for surgical instrument repair services under NAICS code 811210 with a size standard of $9 million. This notice is strictly for market research purposes and does not constitute a solicitation, request for proposals, or any binding obligation on the part of the VA. No contracts will be awarded based on responses to this notice, and respondents should not interpret it as an invitation to bid or as inclusion on any future bidder list. Interested businesses are requested to submit capabilities statements via email to angela.kennedy2@va.gov by 12:00 p.m. Central Time on Monday, June 29, 2026, must include their Unique Entity Identifier and any relevant certifications, and must not be submitted via fax or phone. All potential respondents are required to be currently registered, active, and verified in SAM.gov and the SBA’s certification portal, with veteran-owned small businesses additionally required to comply with VETS-4212 reporting obligations. The anticipated place of performance is Biloxi, Mississippi, with the contracting office located in Ridgeland, Mississippi, and the point of contact is Contract Specialist Angela Kennedy.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

6515--629-27-1-6789-0002 DENTAL UNIT AIR COMPRESSOR REPLACEMENTThe U.S. Department of Veterans Affairs, through Network Contracting Office 16, is conducting market research to identify qualified contractors capable of supplying an oil-free rotary scroll dental air compressor to replace an inoperable unit at the Southeast Louisiana Veterans Healthcare System in New Orleans, Louisiana. This sources sought notice is not a solicitation and does not obligate the government to award a contract; however, it seeks detailed information from potential vendors regarding their ability to meet technical requirements, compliance with federal acquisition regulations, and market pricing. Respondents must provide comprehensive documentation including company size status, SAM registration details, proof of small business certification if applicable, evidence of OEM authorization, Buy American Act and Trade Agreements Act compliance, country of origin for the equipment, delivery timelines, and supporting literature demonstrating past performance on similar government contracts. The notice specifically requires clarification on whether the respondent is a manufacturer or distributor and whether the product qualifies under the nonmanufacturer rule. The government is evaluating potential small business participation and competition levels to determine if a set-aside is appropriate for the upcoming procurement. Responses must include a completed draft statement of work alignment, details on existing government contracts held, and confirmation of eligibility under any existing federal contracts such as GSA Schedules, GWACs, IDIQs, or BPAs. All submissions are due by August 10, 2026, at 10:00 a.m. CST and must be emailed to the designated contracting officer with the specified subject line. No telephone inquiries will be accepted, and failure to provide complete and accurate responses will result in nonresponsiveness. The information submitted will be used strictly for market research purposes and will not be shared beyond the NCO 16 purchasing team. This notice serves as a preliminary step prior to any potential solicitation, which will be formally announced on SAM.gov if initiated.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Esophageal CatheterThe contract is for an esophageal catheter under solicitation number 36C25626Q1134, issued by the Department of Veterans Affairs through the 256-NETWORK Contract Office 16 located in Ridgeland, Mississippi. The solicitation was posted on July 28, 2026, with a response deadline of August 7, 2026, at 5:00 PM Eastern Time. It falls under NAICS code 339112, which pertains to medical equipment and supplies manufacturing, indicating the requirement is for a specific medical device. The contracting office is an official federal entity, and the place of performance is not specified, suggesting delivery may be to multiple VA facilities nationwide. Angela M. Kennedy, Contract Specialist, is the primary point of contact and can be reached at angela.kennedy2@va.gov for further inquiries regarding this procurement.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

6640--Biotyper Sirius CA System with centrifugeThe solicitation 36C25626Q1142, issued by the Department of Veterans Affairs through the 256-NETWORK Contract Office 16 located in Ridgeland, Mississippi, seeks information regarding the procurement of the Biotyper Sirius CA System with centrifuge. This sources sought notice is aimed at gathering market research to assess industry capabilities and determine optimal acquisition strategies for the specified equipment, which is intended for use at the performance location in Jackson, Mississippi. The posting was made on July 28, 2026, with responses due by July 31, 2026, and falls under NAICS code 334516, which pertains to medical equipment and supplies manufacturing. The primary point of contact for inquiries is William Shaver, Contract Specialist, reachable via email at William.Shaver@va.gov. No set-aside designation is specified, indicating the opportunity is open to all eligible small businesses and large businesses. Further technical specifications and requirements are referenced in the draft Statement of Work, Attachment A, and the full context of the procurement intent is detailed in the accompanying Sources Sought Notice.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

S201--Window WashingThe contract titled S201–Window Washing is a service acquisition issued under solicitation number 36C25626Q1137 by the Department of Veterans Affairs through the 256-NETWORK Contract Office 16 located in Ridgeland, Mississippi. It is structured as a combined solicitation with a response deadline of August 4, 2026, and is specifically set aside for Service-Disabled Veteran-Owned Small Businesses as defined by the SDVOSBC designation. The work involves window washing services to be performed at a location in Fayetteville, Arkansas, with the North American Industry Classification System code 561720, indicating it falls under building cleaning services. The contract is managed by Contract Specialist William Shaver, who serves as the primary point of contact and can be reached at William.Shaver@va.gov. The solicitation references additional required documents, including the P07 Wage Determination, which outlines prevailing wage rates and fringe benefits applicable to workers under this contract. All interested bidders must comply with federal contracting requirements and ensure adherence to the specified set-aside criteria to be eligible for award.

Janitorial Services

POSTED

DEADLINE

IT and Data Management Support for e-Invoicing and ComplianceThe contract supports the implementation and maintenance of electronic invoicing through the VA e-Invoice portal, requiring the contractor to handle data securely and ensure strict segregation between systems and information streams to meet federal privacy standards. All IT systems and processes must comply with Department of Veterans Affairs cybersecurity and data protection regulations, with an emphasis on safeguarding sensitive health and financial information. The work includes ongoing monitoring, updates, and reporting to maintain system integrity and regulatory alignment. Performance is centered in Shreveport, Louisiana, with a deadline for proposals set for August 10, 2026. This is a subcontract under the NAICS code 541512 for Computer Systems Design and Related Services, managed by the Department of Veterans Affairs’ 256-NETWORK Contract Office 16. The contract does not specify a set-aside type or point of contact, and all deliverables must align with VA’s comprehensive compliance protocols without exception.

Computer Systems Design Services

POSTED

DEADLINE