Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

6515--629-27-1-6789-0002 DENTAL UNIT AIR COMPRESSOR REPLACEMENT

Active
36C25626Q1145Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Veterans Affairs → 256-NETWORK Contract Office 16 (36C256)View Agency

NAICS

339112 - Surgical and Medical Instrument ManufacturingView NAICS

Place of Performance

DEPARTMENT OF VETERANS AFFAIRS NCO 16 Overton Brooks VA Medical Center, Shreveport, MS, 71101

Set-Aside

NONE

Documents

(2)

36C25626Q1145.docx

DOCX

SOW+DENTAL+COMPRESSOR+REPLACEMENT+2026_6_23.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Veterans Affairs → 256-NETWORK Contract Office 16 (36C256)
Contacts1 person available
OfficeRIDGELAND, MS, 39157, USA
Organization / Agency
Department Of Veterans Affairs → 256-NETWORK Contract Office 16 (36C256)
View Agency Profile
Office AddressRIDGELAND, MS, 39157, USA
Contacts
Tiffany ConnerContracting Officer

Full Description

Show more
Presolicitation/Sources Sought Notice
Presolicitation/Sources Sought Notice

Presolicitation/Sources Sought Notice *=Required Field Presolicitation Notice
1. Title: Dental Air Compressor (Oil-Free Rotary Scroll)
2. Purpose: The Network Contracting Office (NCO) 16, located at Southeast Louisiana Healthcare System, 2400 Canal St., New Orleans, LA, hereby issues the following Sources Sought to Request Information (RFI) with the intent of determining the contractor interest, capabilities, qualifications of potential businesses, nonmanufacturer rule compliance, Buy American Act compliance, Trade Agreement compliance and estimated industry pricing information for market research and estimated budgetary purpose for replacement Oil-Free Rotary Scroll Dental Air Compressor.
Contractor shall provide and deliver the necessary equipment to replace the inoperable Dental Air compressor at the VA in New Orleans. This Sources Sought is published for market research purposes. This Sources Sought will be used to determine if a set-aside for any small business program is appropriate. Government anticipates competitive, firm fixed price contract. Please review this announcement, respond to questions below and review all attachments in their entirety.
Government requests that interested offerors complete all questions below, provide required documentation, descriptive literature, information for compatibility to existing government equipment and authorization letter as described below. The Government is in no way obligated to do business with or to enter into any form of contract with any person, firm or other entity that receives or responds to this announcement.
3. Objective: To find qualified and certified contractors with the capability to provide Oil-Free Rotary Scroll Air Compressor per draft statement of work.
4. Place of Performance:
Delivery Location:
Southeast Louisiana Veterans Healthcare System 2400 Canal St. New Orleans, LA. 71109.
5. Responses Requested: The NCO 16 requires all the following information and questions answered in this RFI/SS: Questions and information that is not provided shall be considered nonresponsive to the Request for Information and contractor may not be considered as part of the market research.
a. Contractors shall provide their point(s) of contact name, address, telephone number, and email address; and the company's business size, and SAM Unique Entity Identification Number.
b. Is your company a small business, SDBs, HUBZone, or 8A concern? Please provide proof of qualifications.
c. Is your company considered small under the NAICS code: 333912?
d. Do you (Contractor) manufacture the product itself or a distributor of the items being researched above?
e. Are you an authorized distributor/reseller to provide the product and services? Provide evidence from original equipment manufacturer (OEM).
f. Do you (Contractor) supply a product manufactured by another domestic small business, if it is a nonmanufacturer?
g. Do you (Contractor) supply the product of any sized manufacturer if SBA has granted a waiver to the nonmanufacturer rule?
h. Is your (Contractor) Buy American Certificate completed in SAM? Please provide evidence with response.
i. Is your (Contractor) Trade Agreement Certificate completed in SAM? Please provide evidence with response.
j. Information for the product being requested, is it manufactured outside the US-Domestic non-available? Please provide country of origin.
k. Information for the product being requested, is it a foreign manufactured end product under the trade agreement?
l. What is your schedule of delivery after receipt of order for the product?
m. For the product required, Is your company available under any;
Government Wide Agency Contract (GWAC) General Services Administration Schedules (GSA) Indefinite Delivery Indefinite Quantity (IDIQ) Blanket Purchase Agreement (BPA)
If so, please list the contract number.
n. Provide descriptive literature demonstrating ability to meet all of the requirement per the draft SOW. Please provide list of contracts for commercial, federal, state, and local governments. Listed contracts shall provide communication on the government requirement illustrating the capability to meet the government requirement.
o. Contractors shall provide an estimated delivery time for the product.
6. Opportunity: The NCO 16, is seeking information from potential contractors on their ability to provide this service. THIS IS A SOURCES SOUGHT FOR REQUEST INFORMATION (RFI) ONLY. Small Business Concerns are encouraged to provide responses to this Sources Sought in order to assist the NCO 16 in determining potential levels of competition available in the industry. Contractor shall possess the capability to provide all requirements and objectives.
7. Instructions and Response Guidelines: Sources Sought responses are due by August 10, 2026, at 10:00 am (CST) via email to tiffany.conner@va.gov
Telephone requests or inquiries will not be accepted.
This is a New Requirement.
The subject line shall read: 36C25626Q1145-RFI-Sources Sought- Dental Air Compressor. NO SOLICITATION EXISTS AT THIS TIME. There is no page limitation on subparagraphs 5(a) - 5(o).
Please provide the information you deem relevant in order to respond to the specific inquiries of the Sources Sought. Information provided will be used solely by NCO 16 as "market research" and will not be released outside of the NCO 16 Purchasing and Contract Team.
This Sources Sought notice does not constitute a Request for Proposal (RFP), Invitation for Bid (IFB), or Request for Quotation (RFQ), and it is not to be construed as a commitment by the Government to enter into a contract, nor will the Government pay for the information submitted in response to this request. All information contained in this Sources Sought is preliminary as well as subject to modification and is in no way binding on the Government.
In accordance with FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the U.S. Government to form a binding contract. If a solicitation is released, it will be synopsized on Contracting Opportunities (https://beta.sam.gov/) website or GSA. It is the responsibility of the interested parties to monitor these sites for additional information pertaining to this Sources Sought, or future RFP/RFQ.
8. Contact Information: Contract Specialist, Tiffany Conner Email address: tiffany.conner@va.gov
Your responses to this notice are appreciated.
THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE QUOTES/PROPOSALS; however, any firm that believes it can meet the requirements may provide answers, responses and give written notification prior to the response due date and time. Supporting evidence and responses must be furnished in enough detail to demonstrate the ability to perform the requirements.
See attached document: DRAFT-Statement of Work Dental Air Compressor

Similar Contracts

Same NAICS industry code

NAICS: 339112
New
DIBBS
BULB, OTOSCOPEThe contract is for the procurement of 15 otoscope bulbs under NSN 6515-01-647-7534, sourced from Welch Allyn, Inc. with part number 06500-U, requiring delivery within 20 days to Fort Bragg, North Carolina, under FOB destination terms. The item is classified as a FDA-regulated Class I medical device, requiring compliance with registration, listing, labeling, and GMP standards even if a 510(k) is not mandatory. Packaging must adhere to commercial standards specified in the procurement document, with each unit sealed in a protected container and shipped in suitable exterior containers ensuring safe, cost-effective delivery. All marking must follow Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support or online. The items must be shipped via traceable freight methods, excluding parcel post, and palletization must comply with DLA packaging requirements. The contract reference number is SPE2DS-26-T-278L, with a response deadline of August 3, 2026, and the required delivery date is July 29, 2026. The purchasing unit price is $15.00 per unit, totaling $225, with no variance allowed in quantity. The contracting official must submit a referral in EBS to confirm regulatory compliance, including manufacturer and bidder details. The supply chain and delivery logistics are managed under Defense Logistics Agency protocols with specific identification codes for tracking and accountability.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, ACUPUNCTUREThe contract specifies the procurement of acupuncture needles measuring 0.30 mm in diameter by 50 mm in length, with a unit of issue of a package containing 100 needles. Each package must be labeled with the NSN 6515-01-674-2741, manufacturer name and CAGE code, date of manufacture, expiration or retest date, and the contract number alongside the lot number. All containers must be marked with the lot control number and manufacture date prefixed by “MFD”. The supplier must clearly identify the company and part number being provided, including approved identifiers such as LHASA OMS, INC. P/N SJ.30X50 and OWENS & MINOR DISTRIBUTION INC P/N 6244RM128488. The product is regulated by the FDA, requiring referral through EBS for confirmation by the product specialist prior to award, with full bidder and manufacturer details provided. All packaging must comply with commercial standards, be sealed to protect contents from damage, and be shipped in suitable exterior containers for safe transit at the lowest carrier rate. Labeling and marking must follow Medical Marking Standard No. 1, surpassing references to MIL-STD-129, and packaging must adhere to ASTM D3951 unless superseded by higher-priority DLA technical and quality requirements. The delivery is FOB destination, with a strict 20-day delivery timeline and a required delivery date of July 29, 2026. No quantity variance is permitted. The items must be palletized per RP001, shipped via traceable means excluding parcel post, and delivered to the specified military facility at Fort Bragg, North Carolina. The contract is issued under solicitation SPE2DS-26-T-277G, with total quantity of 4 packages and a unit price of $4.00 per package.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
REFILL MODULES, PROCThe contract specifies the procurement of twenty-eight refill modules for the Brosewell Hinkle Pediatric Resuscitation System, designed for use with the seven-color packs or color-code cart. These modules support critical pediatric emergency procedures including intraosseous access, oxygen delivery, intubation, and IV delivery, and are explicitly latex-free to ensure safety and compliance with medical standards. Each complete unit must be packaged in a sealed container that protects against damage or breakage, and all units must be shipped in commercial exterior containers suitable for safe transport by common carriers at the lowest possible cost to the specified delivery point at Fort Bliss, ZIP 79918-2527. All items must conform to Medical Marking Standard No. 1, replacing any prior references to MIL-STD-129, and labeling must follow this standard strictly. The unit of issue is each, with one unit being procured under NSN 6515-01-513-9488 and purchase request 7017631807. Technical and quality requirements identified by R or I numbers are governed by the DLA Master List, with the version in effect on the solicitation issue date controlling compliance. The solicitation, issued under SPE2DS-26-T-277L, has a response deadline of August 3, 2026, and requires delivery within 20 days after award. The contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with primary point of contact Brooke Webb.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
CATHETER, INTRAVENOUSThe contract specifies the procurement of 6 packages of intravenous catheters, each containing 200 units, for a total of 1,200 catheters. Each catheter is a 20-gauge polyurethane device with a 1-inch straight needle, featuring a passive safety design that automatically engages a safety clip when the bevel exits the catheter hub, with the bevel orientation clearly marked on the push-off plate. The catheters have no wings, are sterile, and must comply with strict shelf life requirements: a minimum of 60 months from manufacture and no more than 9 months elapsed between manufacturer date and delivery to the government. All labeling must include the manufacturer date, expiration or retest date, contract number, and lot number, adhering to the latest revision of MMS1A standards. The product must meet technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, and packaging must conform to DLA requirements. The contract includes provisions for the removal of government identification from non-accepted supplies and applies to covered defense information. The solicitation number is SPE2DS-26-T-282X, with a response deadline of August 3, 2026, and delivery must be completed within 20 days after order. The point of contact is Vernon Stevenson of the Department of Defense, Medical Supply Chain MD Surg FSF, with performance located at Fort Bragg, North Carolina.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
WIRE, BONEThe contract specifies the procurement of sterile Kirschner wires, described as threaded, 9 inches long, with a diameter of 0.045 inches and diamond-point ends on both sides, supplied in packages of five units per package, with a total order quantity of four packages. The item is regulated by the FDA and requires confirmation through the EBS referral system, with mandatory inclusion of bidder and manufacturer details including part numbers such as ZIMMER INC P/N 47-0262-012-00 and TWO RIVERS MEDICAL P/N 47-262-12-00. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, which replaces MIL-STD-129, ensuring proper identification and protection during transit. Each unit must be sealed in a container that prevents damage, and shipping containers must ensure safe delivery at the lowest cost to the designated destination, which is APO 96260-5479. The contract adheres to DLA packaging and quality requirements under RP001 and RA001, referencing the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date. The NSN is 6515-01-466-5249, with a delivery window of 84 days, FOB destination, zero quantity variance, and inspection and acceptance occurring at the delivery point. The solicitation number is SPE2DS-26-T-280T, with a response deadline of August 3, 2026, issued under NAICS code 339112 by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
BRACE, WRIST AND FOREARThe contract pertains to the procurement of two wrist and forearm braces with NSN 6515-01-699-6578, supplied by NORTH COAST MEDICAL, INC. under part number NC91263, for delivery within 84 days to a designated military medical facility in APO AE 09227-0000. Each unit must be individually sealed in a commercial-grade container that protects against damage or breakage, and all units must be packed in commercial shipping containers suitable for safe transport via common carrier at the lowest possible rate. All packaging and marking must comply strictly with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and detailed packaging instructions must follow RP001 and other referenced DLA guidelines. The item is classified as a Class I medical device under FDA Regulation 890.3475, requiring compliance with registration, listing, labeling, and GMP standards, though a 510(k) may or may not be required. The contract specifies zero variance in quantity, with inspection and acceptance occurring at destination, and mandates adherence to DLA packaging and marking protocols including palletization standards. Delivery is FOB destination, and transportation must conform to DLAD procedural notes C19 and C20. The solicitation is issued under SPE2DS-26-T-279E with a response deadline of August 3, 2026, and the item is procured under a federal acquisition framework managed by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
DRESSING, WOUND, FIRST AThis is a sterile, vacuum-packed trauma dressing designed for emergency wound care, featuring an Israeli-style compression bandage that integrates a non-adherent wound pad, an elastic webbing component, a plastic pressure bar, and a plastic closure/tourniquet bar—all contained in double vacuum-sealed pouches. The wound pad measures 10 by 17 cm and is composed of non-woven high-density polyethylene, cotton, and polyethylene; the elastic portion extends to 4 meters when stretched and is made of polyamide, nylon-wrapped rubber, and cotton. The entire assembly is sterile, OD green in color, and intended for single-unit use. The product must have a 96-month shelf life with no extensions permitted, and no more than 14 months may have elapsed from the date of manufacture to the date of government delivery. Labeling must include the manufacturer date, expiration or retest date, and contract or lot number in compliance with the latest revision of MMS1A. Packaging, quality, and handling must meet DLA procurement standards, including requirements for covered defense information and removal of government identification from rejected supplies. The item is identified by NSN 6510-01-460-0849 and falls under NAICS code 339112. Bidders must provide the source and part number being offered. This solicitation, issued under contract SPE2DS-26-T-280Z, requires delivery to Fort Bliss, Texas, within 20 days of award, with responses due by August 3, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Veterans Affairs → 256-NETWORK Contract Office 16 (36C256)

Same awarding agency

NAICS: 213112
New
Federal
H266--Boiler Plant Gas Detection TestingThe contract pertains to Gas Detection Systems testing for the NLR Boiler Plant (B69) at the North Little Rock Veterans Hospital under the Central Arkansas Veterans Healthcare System, with the primary objective of verifying that the gas detection system operates correctly and is properly calibrated to identify and alert when gas levels exceed established safety thresholds, in full compliance with NFPA requirements. The procurement is issued under solicitation number 36C25626Q0991 by the Department of Veterans Affairs’ Network Contracting Office 16, located in Biloxi, Mississippi, and is classified under NAICS code 213112 for Support Activities for Oil and Gas Operations, with a Product Service Code of H266 for Equipment and Materials Testing — Instruments and Laboratory Equipment. The solicitation is a total small business set-aside, and all submissions must be received electronically by July 20, 2026, at 12:00 PM CDT, directed to Contract Specialist Angela M. Kennedy at angela.kennedy2@va.gov, with the solicitation number included in the email subject line. Proposals must be submitted via email only, with attachments limited to 5 MB per message and formatted in Microsoft Office or Adobe PDF. Required documentation includes a signed Contractor Certification addressing compliance with the Immigration and Nationality Act, a list of past performance references, and a completed past performance questionnaire, along with the applicable Pulaski County Wage Determination. The contract incorporates numerous Federal Acquisition Regulation (FAR) and Veterans Affairs Acquisition Regulation (VAAR) clauses by reference, including those on whistleblower protections, prohibitions on mandatory confidentiality agreements, small business set-asides, limitations on subcontracting, labor standards, security prohibitions, personnel vetting, and the prohibition on contracting with inverted domestic corporations. Subcontractors must also adhere to all terms, and the contractor is required to flow down these obligations and obtain written acknowledgment. Additional requirements include compliance with the Federal Acquisition Supply Chain Security Act, prohibition on employing illegal aliens or violating non-immigrant status, and strict controls on information security—contractors are barred from accessing VA desktop computers, government online systems, or protected Patient Health Information. Payment will be made via electronic funds transfer after delivery, installation, testing, and formal acceptance by the government, with no advance payments permitted. Invoices must include specific details such as contract number, line item, quantity, unit price, facility location, and authorized payment recipient, following VAAR Clause 85
Support Activities for Oil and Gas Operations

POSTED

about 21 hours ago

DEADLINE

N/A
View Details