Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Membrane Element Assembly Supplier

Active

Federal

Response Deadline11/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of 42 Membrane Element Assemblies, identified by NSN 4440-01-459-4300, to support prime contractors on Department of Defense supply contracts. The selected supplier is responsible for the fabrication of membrane elements and the assembly of units, ensuring strict adherence to configuration control standards per MIL-STD-973 and compliance with NAVSEA 5100-003D regarding the exclusion of mercury. Each unit must be delivered with comprehensive commercial manuals covering operation, maintenance, and parts lists. Managed by the Department of Defense in San Diego, the project falls under NAICS code 333994. The response deadline for this opportunity is November 16, 2026, with the place of performance located in San Diego, California.

General Info

Agency

Department Of Defense → SAN DIEGO

NAICS

333994 - Industrial Process Furnace and Oven Manufacturing

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E8-27-T-0479.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MEMBRANE ELEMENT AS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 3

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SAN DIEGO

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → SAN DIEGO

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies Membrane Element Assemblies (NSN 4440-01-459-4300) for prime contractors on DLA supply contracts. Manufactures membrane elements and assembles units while maintaining configuration control per MIL-STD-973. Ensures no intentional addition of mercury per NAVSEA 5100-003D. Delivers 42 units with accompanying commercial manuals including operation, maintenance, and parts lists.

Similar Contracts

Same NAICS industry code

NCAT Ignition Oven for the TxDOT Corpus Christi District

Solicitation # 601320000072129

The Texas Department of Transportation is soliciting bids for the procurement of an NCAT Ignition Oven to be utilized by the TxDOT Corpus Christi District. This solicitation, identified by number 601320000072129, was posted on November 3, 2026, with a response deadline of November 24, 2026. The project is managed by the Texas Department of Transportation as a SLED organization, with Brooke Zotz serving as the primary procurement point of contact. Interested vendors must register and submit their responses through the Euna Procurement portal. All official communications, including addendums and question-and-answer sessions, will be posted on the procurement website. The agency utilizes NIGP codes and the Texas Comptroller of Public Accounts Centralized Master Bidders List for vendor selection. Submissions received after the specified due date and time will not be accepted.

Texas Department of Transportation

POSTED

about 6 hours ago

DEADLINE

409-27 Rolling Thin Film Oven

Solicitation # 409-27

The Ohio Department of Transportation is soliciting a one-time purchase of one new Rolling Thin Film Oven (RTFO) for asphalt binder testing that meets AASHTO T 240 standards. The procurement includes the latest production model of the equipment along with specific accessories: eight glass RTFO bottles, one set of jar tongs, one bottle cooling rack, and one bottle scraper. The equipment must have a depth not exceeding 26 inches and operate on 208-230V; 60Hz power. The comprehensive bid must encompass the cost of the equipment, shipping to the Office of Materials Management in Columbus, Ohio, installation, onsite calibration, and training. Bids are submitted electronically via OhioBuys and are evaluated based on responsiveness, responsibility, and total evaluated cost. In the event of a price tie, vendors may be asked to provide revised pricing within two business days. Vendors must provide documentation as an authorized dealer or distributor and must certify compliance with Buy American and Buy Ohio preferences. Delivery is F.O.B. Destination, with the contractor bearing the risk of loss during transportation. Payment is processed via electronic funds transfer, with terms set at 30 days from the receipt of a proper invoice.

Dept Of Transportation

POSTED

about 7 hours ago

DEADLINE

MEMBRANE ASSEMBLY

Solicitation # SPE8E8-27-T-0481

Solicitation SPE8E8-27-T-0481 is a federal acquisition by the Defense Logistics Agency for one membrane assembly, identified by NSN 4440-01-665-4300 and piece number 6964659. The requirement is based on Technical Data Package Revision A, General 1, and basic drawing 53711 6964659. The item must be delivered within 20 days of award, with an original required delivery date of October 29, 2026. Shipping is FOB Origin, while both inspection and acceptance will occur at the destination. Delivery locations include the NUWC Division Keyport in Ewa Beach and Joint Base Pearl Harbor, Hawaii. The contract mandates strict adherence to DLA Master List technical and quality requirements, specifically RP001 for packaging and palletization, and MIL-STD-129 for marking and labeling. Packaging must also comply with ASTM D3951. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and cybersecurity reporting under DFARS 252.204-7012. Offerors must maintain active registration in the System for Award Management and provide necessary representations regarding small business status and the use of covered defense telecommunications equipment.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

MEMBRANE ELEMENT AS

Solicitation # SPE8E8-27-T-0479

Solicitation SPE8E8-27-T-0479 is a fixed-price procurement issued by the Defense Logistics Agency for 42 units of Membrane Element Assemblies, identified by NSN 4440-01-459-4300. The items are to be delivered to DLA Distribution San Diego, with a required delivery timeline of 71 days after order and an original required delivery date of December 17, 2026. The contractor is required to provide one manufacturer's commercial manual covering operation, services, maintenance, and repair. The contract mandates strict adherence to quality and technical standards, including configuration control per MIL-STD-973 and packaging and marking requirements according to MIL-STD-2073-1E and MIL-STD-129. Special restrictions prohibit the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Inspection and acceptance will occur at the destination. Payment must be processed electronically through the Wide Area WorkFlow system. The procurement is associated with NAICS code 333994 and includes standard FAR and DFARS clauses regarding sustainable products, hazardous material identification, and safeguarding covered defense information.

POSTED

about 10 hours ago

DEADLINE

Supply of Electric Desiccant Dehumidifiers (NSN 4440012732564)This subcontract involves the supply of seven electric desiccant dehumidifiers, identified by NSN 4440012732564, for prime contractors working on DLA Troop Support Construction and Equipment projects. The equipment must strictly adhere to TDP Rev A Gen 1 and meet specific electrical requirements of 230 Volts, single phase, and 60 HZ. All units are required to be packaged in accordance with RP001 DLA Packaging Requirements. Managed by the Department of Defense through the Jacksonville Building office, the contract requires the provider to submit representations regarding covered defense telecommunications equipment. Performance will take place in Jacksonville, Florida. The solicitation was posted on November 2, 2026, with a response deadline of November 13, 2026.

JACKSONVILLE BLDG

POSTED

DEADLINE

DEHUMIDIFIER, DESICCANT

Solicitation # SPE8E8-27-T-0466

Solicitation SPE8E8-27-T-0466 is a small business set-aside request for the procurement of seven electric desiccant dehumidifiers, identified by NSN 4440012732564. The required equipment must operate at 230 Volts, single phase, 60 HZ, and comply with TDP Rev A Gen 1. The items are to be delivered FOB Origin to DLA Distribution Jacksonville, Florida, with a required delivery date of March 1, 2027, and a delivery lead time of 107 days. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 for labeling and RP001 for palletization, with ASTM D3951 serving as the general packaging standard. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. The procurement is subject to various federal regulations, including the Buy American Act, safeguarding of covered defense information under DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment.

JACKSONVILLE BLDG

POSTED

DEADLINE

Compressor-Dehydrator PN 11474244

Solicitation # SPRRA227R0801

The Defense Logistics Agency is conducting market research to identify qualified manufacturing and supply sources for the Compressor-Dehydrator, part number 11474244, used in the Patriot Weapons System. This Sources Sought Synopsis aims to determine if future acquisitions can be competitive or set aside for small businesses, including 8(a), Hubzone, and women-owned concerns. The effort falls under NAICS code 333994, with a size standard of 500 employees. Prospective contractors must meet prequalification requirements through the U.S. Army Combat Capabilities Development Command Aviation and Missile Center. Awarded contractors will be responsible for all recurring and nonrecurring engineering services, supply chain management, material forecasting, and the resolution of obsolescence issues. This notice is for informational purposes only and does not constitute a formal solicitation or a commitment by the government to award a contract.

Al DLA Aviation At Huntsville

POSTED

DEADLINE

Deep Pit Furnace

Solicitation # W519TC-27-Q-A019

Army Contracting Command-Rock Island is soliciting quotes for the procurement of one stationary, top-loading electric deep pit furnace for the Rock Island Arsenal, Joint Manufacturing and Technology Center. This is a firm fixed price acquisition set aside for small businesses, specifically targeting HubZone small businesses. The required furnace must be a free-standing vertical cylinder capable of austenitizing and normalizing heat treatment processes with a minimum operating range of 1500 to 1850 degrees Fahrenheit and the capacity to support loads up to 10,000 pounds without distortion. The equipment must comply with SAE AMS 2750 Class 5 or better, ASTM E230, and NFPA 86 standards. The government will award the contract to the lowest priced, responsive, and responsible vendor based on a lowest price technically acceptable selection process. Technical acceptability requires a strict compliance statement marking every paragraph of the purchase description as comply or non-comply, as well as evidence that the manufacturer has offered similar equipment for at least three years. Key deliverables include the furnace unit, CAD models, a certificate of conformance, and signed reports for the Initial Temperature Uniformity Survey and Initial System Accuracy Test. Delivery is required by June 1, 2027, with shipping to Rock Island Arsenal, Illinois, and payment processed via Wide Area WorkFlow. A site visit is scheduled for November 10, 2026, and quotes are due by November 27, 2026.

POSTED

DEADLINE

DEHUMIDIFIER, SPACE

Solicitation # SPE8E8-27-T-0448

Solicitation SPE8E8-27-T-0448 is a request for quotations from DLA Troop Support, Construction and Equipment for the procurement of five space dehumidifiers, identified by NSN 4440123992587. The requirements specify parts from Hensoldt Sensors GmbH, specifically part numbers 54.1227.560.00 and 83154459, and compliance with TDP Rev A Gen 1. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a need ship date of September 29, 2026, and an original required delivery date of October 22, 2026. Delivery is set for 87 days after receipt of order, with FOB terms specified as Origin. The contract mandates strict adherence to DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. All packaging must be marked and labeled according to MIL-STD-129, and palletization must follow RP001 requirements. Inspection and acceptance will occur at the destination. The procurement includes various FAR and DFARS clauses covering basic safeguarding of contractor information systems, combating trafficking in persons, and the Buy American Act. Invoicing and payment must be processed through the Wide Area WorkFlow system. Quotations are due by November 9, 2026, and must be submitted to the issuing office in Philadelphia.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Custom R&D Industrial Furnace

Solicitation # 7-S176-Q-00012-00

Argonne National Laboratory (ANL) is soliciting a firm fixed price contract under solicitation 7-S176-Q-00012-00 for the design, fabrication, delivery, installation, and commissioning of a custom industrial R&D furnace. The furnace is intended for testing fuel-flexible burners using natural gas and hydrogen blends from 0 to 100 percent H2, supporting both direct and indirect-fired configurations. Key technical specifications include a maximum continuous firing rate of 5 MMBtu/hr, a maximum bulk temperature of 2400 degrees Fahrenheit, and the inclusion of 70 threaded instrumentation ports and high-temperature optical windows. The project is expected to take approximately six months, with a target completion date of June 2027 and a planned award date in January 2027. Award will be made based on the Lowest Price Technically Acceptable (LPTA) basis, with technical acceptability evaluated on a pass/fail basis. Offerors must provide a completed ANL-70 Request for Quotation, technical compliance responses, country of origin information per FAR 52.225-1, and signed ANL-70B representations and certifications. Performance involves fabrication at the supplier's facility and installation at ANL Building 362 in Lemont, Illinois. Acceptance is contingent upon successful commissioning with a natural gas fired burner for at least two hours, ensuring the exterior shell temperature does not exceed 176 degrees Fahrenheit. The contract includes various FAR and DEAR clauses regarding labor standards, small business utilization, and safety, and requires specific insurance certifications and a High Risk Job Safety Analysis Form ESH-209 before a Notice to Proceed is issued.

Argonne National Labor - DOE Contractor

POSTED

DEADLINE

Supply, delivery, installation and commissioning of six (6) units of Autoclave system for the School of Materials Science and Engineering, Nanyang Technological University (PR761154)

Solicitation # Doc5955944467

Nanyang Technological University is seeking proposals for the supply, delivery, installation, and commissioning of six autoclave system units for the School of Materials Science and Engineering. This procurement opportunity, identified by solicitation number Doc5955944467, requires all bids to be submitted exclusively through the designated sourcing event by the deadline of November 10, 2026. Suppliers must download the specification documents via the Response to posting section to identify the primary contact person and any site briefing details. It is critical that proposals are submitted using the submit entire response function, as submissions through other channels may lead to disqualification. Additionally, bidders should note that the currency cannot be changed after submission and the default opportunity amount of 500 USD should be ignored.

Nanyang Technological University

POSTED

DEADLINE

DEHUMIDIFIER, DESICC

Solicitation # SPE8E8-27-T-0432

Solicitation SPE8E8-27-T-0432, issued by the Defense Logistics Agency, is for the procurement of two desiccant dehumidifier units, identified by NSN 4440-01-663-2801 and part piece number 86753-020. The items must be manufactured in accordance with Technical Data Package Rev A Gen 1, specifically Basic Drawing NR 5B5M3 19E2500234 Revision B and Reference Drawing NR 5B5M3 19E2500234. Delivery is required within 20 days after receipt of order, with an original required delivery date of April 7, 2026. The shipping terms are FOB Origin, and the destination for both freight and parcel post is the NSWC Carderock Division in Bethesda, Maryland. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951, MIL-STD-129, and DLA packaging requirement RP001. Inspection and acceptance will occur at the destination. Payment must be processed electronically through the Wide Area WorkFlow system. Key regulatory requirements include the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards. Offers produced using additive manufacturing are ineligible for award unless specifically authorized. The solicitation is open for responses until November 9, 2026, and incorporates a price evaluation preference for certified HUBZone small business concerns.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → SAN DIEGO

Same awarding agency

Titanium Alloy UNS R56400 Round Bar SupplyThis subcontract involves the supply of 52 feet of certified titanium alloy UNS R56400 round bars for prime contractors supporting DLA Troop Support procurement projects. The required materials must be round, drawn, or rolled with a diameter of 0.875 inches and lengths ranging between 10 and 12 feet. All bars must be solution treated and aged in strict accordance with SAE AMS6930G, SAE AMS2809B, and QAP 13873 standards. Managed by the Department of Defense in San Diego, the contract mandates that the supplier maintain a QSLD listing and provide a Certificate of Quality Compliance. Interested parties must respond by November 16, 2026, to fulfill the requirements under NAICS code 332111. Performance for this procurement will take place in San Diego, California.

Iron and Steel Forging

POSTED

about 10 hours ago

DEADLINE

Industrial Fluid Cooler Baffle SupplierThis subcontract involves the manufacture or procurement of 186 industrial fluid cooler baffles, specifically Part Number PA12652373, for prime contractors supporting Department of Defense supply contracts through the agency in San Diego. All units must be produced in accordance with TDP Rev A Gen 1 and the DLA Master List of Technical and Quality Requirements, with delivery terms set as FOB Origin. Packaging must strictly adhere to MIL-STD-2073-1E standards, utilizing QUP 001, Preservation Method 10, and Cleaning/Drying method 1. The project falls under NAICS code 332312 and is performed in San Diego, California, with a response deadline of November 16, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 10 hours ago

DEADLINE

Military Packaging and Shipping ServicesThis subcontract for Military Packaging and Shipping Services involves providing specialized packaging, marking, and palletization for prime contractors supporting DLA supply contracts. The service provider is responsible for ensuring all items are processed according to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Requirements include the use of military-grade packing materials and specified JC cushioning or dunnage to prepare shipments for FOB Origin delivery to DLA Distribution San Diego. Managed under the Department of Defense in San Diego, the contract falls under NAICS code 561910. The performance of these services will take place in San Diego, California, with a primary focus on delivering properly packaged and marked shipments that meet strict military standards. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026.

Packaging and Labeling Services

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0227

Solicitation SPE8E4-27-T-0227 is a small business set-aside request for quotations issued by DLA Troop Support for the procurement of 52 feet of round, drawn or rolled titanium alloy metal bars (UNS R56400). The material must be solution treated and aged, featuring a diameter of 0.875 inches and lengths between 10 and 12 feet. Compliance with technical standards SAE AMS6930G, SAE AMS2809B, and QAP 13873 is required, and a Certificate of Quality Compliance must accompany every shipment. The delivery is scheduled for 160 days after order, with a required delivery date of March 6, 2027, and a need ship date of April 26, 2027, shipping FOB Origin to DLA Distribution San Diego. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD), and offers utilizing additive manufacturing are ineligible. The contract mandates rigorous marking and packaging standards per MIL-STD-129 and MIL-STD-2073-1E, including waterproof continuous identification markings such as the DLA contract number, NSN, and manufacturer heat and lot numbers. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to the Buy American Act and Berry Amendment for domestic sourcing.

Nonferrous Forging

POSTED

about 10 hours ago

DEADLINE

44--BAFFLE,FLUID COOLER,IN

Solicitation # SPE8E8-27-T-0472

Solicitation SPE8E8-27-T-0472, issued by DLA Troop Support Construction and Equipment, is a request for quotations for 186 industrial fluid cooler baffles, identified by NSN 4420016125942 and Fairbanks Morse part number PA12652373. The procurement is categorized under NAICS 332312 and requires adherence to Technical Data Package Rev A Gen 1 and the DLA Master List of Technical and Quality Requirements. Delivery is specified as FOB Origin with a required delivery date of February 3, 2027, and a need ship date of April 26, 2027, with a delivery window of 160 days. Inspection and acceptance will occur at the destination, specifically DLA Distribution San Diego. The contract mandates strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with additional palletization requirements per RP001. Notably, the use of additive manufacturing processes is prohibited without prior approval. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses covering equal opportunity, combating trafficking in persons, and cybersecurity standards, including NIST SP 800-171 and safeguarding of covered defense information. Offerors must also comply with domestic material restrictions such as the Buy American Act and the Berry Amendment.

Fabricated Structural Metal Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7MC-27-T-0968

Solicitation SPE7MC-27-T-0968 is a fixed-price request for quotation issued by the Defense Logistics Agency for the procurement of 23 check valves, identified by NSN 4820015437794. The requirement is designated as a total small business set-aside under NAICS code 332919. Delivery is required within 168 days after order receipt, with shipping terms established as FOB Origin and the final destination for inspection and acceptance located at DLA Distribution San Diego. The contract mandates strict adherence to quality and technical standards, including ISO 9001:2015 for manufacturer inspection systems and specific DLA Master List requirements such as RP001 for packaging and MIL-STD-129 for marking and labeling. Packaging must comply with ASTM D3951, though DLA Master List requirements take precedence. All invoicing and receiving reports must be processed electronically through the Wide Area Workflow system. Additionally, the procurement incorporates various FAR and DFARS clauses regarding the Buy American Act, cybersecurity safeguarding, and the prohibition of unauthorized additive manufacturing.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-27-T-0895

Solicitation SPE7MC-27-T-0895 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Hardware/Electrical office for the procurement of seven safety relief valves. These critical application items must feature a copper and tin alloy body, a size of 3 by 4 inches, a maximum operating pressure of 150 PSI, and an adjustable pressure range between 59 and 72 PSI. The items are restricted source components requiring engineering source approval from the government design control activity. Manufacturing may require specific casting or forging tooling, and the contract strictly prohibits the intentional addition of mercury or the use of Class I ozone-depleting chemicals. The contract specifies delivery to DLA Distribution San Diego with a required delivery date of March 17, 2027, and a lead time of 134 days after order. Shipping is designated as FOB Origin under the First Destination Transportation program. Quality and packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the destination. Invoicing is to be processed electronically via Wide Area WorkFlow. This is not a small business set-aside, and offerors must submit quotes through the DLA Internet Bid Board System.

Industrial Valve Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Immobilization ServicesThis subcontract for MIL-SPEC Packaging and Immobilization Services supports prime contractors on aerospace projects for the Department of Defense in San Diego. The scope of work involves the construction of ISPM-15 compliant wooden containers and the immobilization of products through bolting to ensure secure transport. Additionally, the provider is responsible for all marking and labeling in strict accordance with MIL-STD-129 and MIL-STD-2073-1E standards. The final deliverable consists of fully packaged and marked modules ready for shipment to DLA Distribution San Diego. Performance takes place in San Diego, California, under NAICS code 321999. Interested parties must adhere to the response deadline of November 12, 2026.

All Other Miscellaneous Wood Product Manufacturing

POSTED

DEADLINE

Aerospace Surface Treatment and Pressure TestingThis subcontract for Aerospace Surface Treatment and Pressure Testing supports prime contractors on DLA San Diego aerospace projects. The scope of work involves applying specialized corrosion-resistant finishes, such as anodizing and plating, and performing hydrostatic pressure testing up to 3,700 psi. All testing must ensure zero leakage in strict accordance with SAE AS9003 standards, and the final deliverables include finished, coated modules accompanied by certified test reports. The project is managed under the Department of Defense in San Diego, with performance taking place in the 92136-3581 zip code. Environmental compliance is a critical requirement, as the use of mercury and Class I ozone-depleting chemicals is strictly prohibited. Interested parties must adhere to the response deadline of November 12, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Supply of High-Pressure Hydraulic InternalsThis subcontract involves the supply of high-pressure hydraulic internals, including seals, valves, and regulators, for prime contractors working on DLA San Diego aerospace projects. The required components must be flight-certified and capable of operating between 3,250 psi and 3,700 psi at a flow rate of 5 gpm, with the inclusion of noncorrosive plugs for threaded ports. All delivered items must be provided as kitted hydraulic internals and sealing components. Strict adherence to aerospace traceability and certification standards is mandatory for all supplied parts. The contract is managed under the Department of Defense in San Diego, with performance taking place in the 92136-3581 zip code. Interested parties must respond by November 12, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Precision Machining of Hydraulic Module HousingThis subcontract involves the precision CNC machining and fabrication of hydraulic module bodies for prime contractors supporting Department of Defense aerospace projects in San Diego. The scope of work includes CNC milling, turning, and boring to strict aerospace tolerances, as well as deburring and surface finishing to ensure hydraulic seal requirements are met according to drawing 53711 556-5749776 revision M. Qualified providers must hold ISO 9001 or SAE AS9003 certification to ensure quality standards for the delivered machined hydraulic module housings. The project falls under NAICS code 332710, with performance taking place in San Diego, California. Interested parties must respond by November 12, 2026.

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS