Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

MIL-SPEC Packaging and Marking Service

Active

Federal

Response Deadline10/16/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The MIL-SPEC Packaging and Marking Service is a subcontract for the Department of Defense, specifically supporting NAVSUP Weapon Systems Support projects. The contractor is responsible for providing specialized military marking and packaging for prime contractors, which includes the application of ECC200 2D barcodes and DLR labels sourced from Naval Forms Online. The service requires strict adherence to MIL-STD-129 for shipment labeling and verification of machine readability according to MIL-STD-130 Appendix A. Using industrial 2D barcode printers and automated scanners, the contractor will deliver fully marked and labeled shipping containers and units. This opportunity falls under NAICS code 561910, with a response deadline of October 16, 2026.

General Info

MIL-SPEC packaging and marking services for DoD NAVSUP projects, adhering to MIL-STD-129 standards.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

561910 - Packaging and Labeling ServicesView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010426QLB50.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

VALVE,DIAPHRAM CONT

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 21

subcontract

Response DeadlineOct 16

Submission deadline

Response Deadline

10/16/2026, 08:30:00 PM UTCin 25 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Navsup Weapon Systems Support Mech

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized military marking and packaging for prime contractors on NAVSUP Weapon Systems Support projects. Applies ECC200 2D barcodes and DLR labels sourced from Naval Forms Online. Ensures compliance with MIL-STD-129 for shipment labeling and verifies machine readability per MIL-STD-130 Appendix A using industrial 2D barcode printers and automated scanners. Delivers marked and labeled shipping containers and units.

Similar Contracts

Same NAICS industry code

MIL-STD Packaging and Marking ServicesThis subcontract for the Defense Logistics Agency involves providing specialized packaging and marking services for prime contractors. The service provider is responsible for applying markings in accordance with MIL-STD-129 and MIL-STD-129R(3) and executing packaging that adheres to RP001 DLA Packaging Requirements for Procurement. This includes the use of compliant materials and marking equipment to produce labels and stencils that meet strict government standards for shipment and DLA acceptance. The opportunity is categorized under NAICS code 561910 and was posted on September 18, 2026, with a response deadline of September 25, 2026. The contract focuses on ensuring all markers are properly packaged and marked to facilitate seamless delivery and acceptance by the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThis subcontract for the Defense Logistics Agency involves providing specialized packaging, marking, and labeling services for chemical shipments. The contractor is responsible for packing items using glass or plastic jars according to ASTM-D3951-15 and PPP-C186 standards, while ensuring all shipments feature MIL-STD-129 markings, barcodes, and Military Shipping Labels. The scope of work includes the palletization of hazardous materials in compliance with RP001 and IP025 standards to ensure flux is ready for destination delivery. This opportunity falls under NAICS code 561910 and requires responses by September 25, 2026.

Defense Logistics Agency

POSTED

DEADLINE

MIL-STD Compliant Packaging and Shipping ServicesThis subcontract for MIL-STD Compliant Packaging and Shipping Services supports prime contractors delivering DLA supply contracts to Fort Bliss, Texas. The service provider is responsible for executing specialized military packaging and logistics, specifically adhering to MIL-STD-129 for marking, MIL-STD-2073-1E Preservation Method 33 for packaging, and RP001 for palletization. All work must be performed using MIL-STD compliant marking equipment and preservation materials to ensure shipments are fully prepared for transport. Managed under the Land Supply Chain agency of the Department of Defense, the contract falls under NAICS code 561910. The place of performance is located at Fort Bliss, Texas, zip code 79918-0000. Interested parties must note the response deadline of September 23, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE8E5-26-Q-0433

Solicitation SPE8E5-26-Q-0433 is a Firm Fixed Price request for quotations issued by the Defense Logistics Agency for the procurement of 2,000 rolls of labels, specifically American Labelmark Company part number C6 (NSN 7690-01-417-9227). The items are designated as Type I (Code H) with a non-extendable shelf life of 12 months. A critical quality requirement stipulates that materials must have at least 85% of their shelf life remaining at the time of delivery, with expiration dates set exactly one year from the cure date. Delivery is required within 30 days after receipt of order, with the destination and inspection/acceptance points located in Jordan. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, including specific palletization requirements per RP001. The contract incorporates various federal and defense regulations, including safeguarding covered defense information under DFARS 252.204-7012 and the Buy American and Balance of Payments Program. All quotes must be submitted via the DIBBS portal, and payment processing is managed through the Wide Area WorkFlow system.

Defense Logistics Agency

POSTED

DEADLINE

MIL-STD/Federal Standard Compliant Packaging and MarkingThis subcontract with the General Services Administration's Supply Chain Management Contracting Division involves providing professional packaging, marking, and labeling services for prime contractors on GSA/FAS supply contracts. The scope of work requires the application of markings according to Federal Standard 123 and the implementation of 2D PDF417 barcoding for CAGE codes, purchase orders, and National Stock Numbers. All operations must utilize industrial labeling equipment and materials that comply with ASTM D-3951 standards to ensure properly marked shipments for domestic civilian delivery. The project is categorized under NAICS code 561910 and will be performed in Vista, California. Interested parties must respond by September 25, 2026, following the posting date of September 18, 2026.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

MIL-STD-129 Packaging and Logistics ServicesThis subcontract for the Department of Defense Land Supply Chain involves providing comprehensive packaging and logistics services for prime contractors on Defense Logistics Agency supply contracts. The service provider is responsible for supplying packaging materials and performing marking and labeling for parts destined for CONUS shipment. All work must adhere to MIL-SPEC materials, MIL-STD-129 standards, and RP001 DLA Packaging Requirements for Procurement. The contractor must utilize specialized labeling systems to produce compliant tags and ensure all containers are properly packaged, labeled, and shipment-ready. This opportunity falls under NAICS code 561910, with a response deadline of October 2, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services supports the Department of Defense Aviation Supply Chain by providing specialized processing for aviation components. The contractor is responsible for packaging, marking, and palletizing shipments for prime contractors delivering DLA Aviation supply contracts, ensuring all work adheres to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. All deliverables must be prepared using compliant materials and equipment to ensure shipments are ready for FOB Origin delivery. The performance of these services will take place in San Diego, California. This opportunity falls under NAICS code 561910 and was posted on September 17, 2026, with a response deadline of September 25, 2026.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

MIL-STD-129 Compliant Packaging and PalletizationThis subcontract opportunity is for the Department of Defense Fluid Handling Division to provide specialized military packaging and palletization services for prime contractors. The scope of work involves executing packaging according to Preservation Method 10 and palletization per RP001 DLA Packaging Requirements, ensuring all marking and labeling comply with MIL-STD-129 using approved materials and systems. The final deliverable consists of shipments that are fully packaged, marked, and palletized for DLA acceptance. The project is designated as a Total Small Business Set-Aside under NAICS code 561910 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 28, 2026, following the posting date of September 17, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services involves the packaging, marking, and labeling of manufactured springs for prime contractors fulfilling DLA supply contracts. The work is performed in Phoenix, Arizona, under NAICS code 561910 for the Department of Defense agency Land Supplier Opns Engines. The contractor must ensure all packaging adheres to ASTM D3951 and all marking follows MIL-STD-129 using compliant labeling software and materials. The primary objective is to deliver shipments that are fully prepared for government acceptance. The response deadline for this opportunity is September 28, 2026.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Military Specification Packaging and Kitting ServicesThis subcontract for the Department of Defense involves providing specialized packaging and marking services for linear actuating cylinder kits. The contractor is responsible for preparing 15 parts kits for FOB Origin shipment, ensuring all work adheres to MIL-STD-2073-1E for packaging and MIL-STD-129 for markings. The process requires the use of military-grade materials, compliant labeling equipment, and specific preservation and cushioning standards designated as CUSH/DUNN MAT: A. The project is managed under NAICS code 561910 and is associated with the ASC Supplier OE and AF Div. Performance of these services will take place at Hill AFB, zip code 84056-5734. The solicitation was posted on September 17, 2026, with a response deadline of September 25, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

DLA Compliant Packaging and Shipping ServicesThis subcontract for DLA Compliant Packaging and Shipping Services supports the Department of Defense through the ASC Supplier Oper OEM Division. The selected provider will perform specialized packaging and marking for prime contractors, ensuring all hardware is processed according to RP001 DLA Packaging Requirements and MIL-STD-129 shipment and storage marking standards. All work must utilize DLA-approved materials and industrial labeling equipment to ensure shipments are ready for final DLA acceptance. The project is categorized under NAICS code 561910 and will be performed in Tracy, California. Interested parties must respond by September 25, 2026, following the solicitation posted on September 17, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

DLA-Compliant Packaging and Palletization ServicesThis subcontract for DLA-Compliant Packaging and Palletization Services supports the Department of Defense ASC Commodities Division by providing specialized military packaging for prime contractors. The scope of work involves the packaging and preservation of 51 units, strictly adhering to RP001 and MIL-STD-2073-1E standards. Technical requirements include the use of Level D cushioning and Level E5 intermediate containers, and the service provider must hold certifications in both the RP001 and MIL-STD-2073-1E standards. The project is categorized under NAICS code 561910 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by September 25, 2026, following the posting date of September 17, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Valve Component Supplier (Diaphragms/Internal Seals)This subcontract opportunity with the Department of Defense Navsup Weapon Systems Support Mech involves the manufacture and supply of high-precision internal diaphragms and sealing components for prime contractors. The supplier will produce these components using specialized metal alloys, polymers, or elastomers according to strict technical specifications, providing all necessary quality assurance documentation and material certifications. Deliverables may consist of individual components or complete seal kits. The contract requires strict adherence to domestic end product or qualifying country standards as outlined in FAR 252.225-7020. Interested parties must submit their responses by October 16, 2026, under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

Diaphragm Control Valve SupplierThis subcontract involves the supply of finished Diaphragm Control Valves for prime contractors supporting NAVSUP Weapon Systems Support projects under the Department of Defense. The scope of work includes the fabrication and assembly of valves, requiring precision machining and the use of specialized 2D barcode verification hardware. All units must be delivered completed, labeled, and packaged. Compliance with strict identification marking standards is mandatory, specifically adhering to MIL-STD-130. This includes implementing 2D barcodes using ECC200 and data encoding per ISO/IEC 15434, as well as the application of DLR labels to both individual units and their containers. The opportunity is categorized under NAICS code 332919, with a response deadline of October 16, 2026.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # N0010426QZB70

This solicitation is for the procurement of Compartment Salvage Ball Valves for the U.S. Navy, managed by NAVSUP WSS Mechanicsburg. The material is designated as Special Emphasis (Level I), meaning it is used in crucial shipboard systems where failure could result in serious injury or loss of the vessel. Consequently, the contract mandates rigorous quality control, including strict material traceability, quantitative chemical and mechanical analysis for specific components, and comprehensive non-destructive testing such as liquid penetrant and ultrasonic inspections. The contractor must adhere to a wide array of military and industry specifications, including MIL-DTL-1222 and ISO 9001. Key requirements include the use of specific materials like Mearthane for seats and the application of permanent traceability markings on all components. Final acceptance is based on a zero-defect policy, and the award will be DPAS DO certified for national defense. The solicitation requires a bilateral agreement for execution and emphasizes the importance of past performance in the evaluation of offers.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

PARTS KIT,BALL VALV

Solicitation # N0010426QYAGR

This fixed-price solicitation, issued by NAVSUP Weapon Systems Support Mech, seeks a contractor for the teardown, evaluation, repair, and modification of ball valve parts kits (NSN 4820-01-345-5706). The requirement is processed under Emergency Acquisition Flexibilities and is DX certified for national defense. The contractor must provide an estimated repair price and is granted 90 days following the receipt of carcasses to perform a teardown and evaluation before submitting a firm-fixed-price quote for the full repair effort. A requested repair turnaround time (RTAT) of 120 days is established, and failure to meet this timeline will result in a per-unit price reduction. The government also retains an option to order an additional quantity of up to 100% for 365 days after the award at the same price. The award will be made to a single eligible offeror based on the most advantageous combination of price and past performance, with past performance weighted as more important than price. Technical requirements include strict adherence to MIL-STD-130 for physical identification, MIL-STD-2073 for packaging, and a total prohibition of metallic mercury contamination. Quality assurance must comply with MIL-I-45208 or ISO 9001/9002 standards. Inspection and acceptance will occur at the contractor's or subcontractor's plant. All payment requests and receiving reports must be processed electronically through the Wide Area Workflow system.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # N0010426QBW58

This solicitation, number N0010426QBW58, is issued by the Department of Defense via the Navsup Weapon Systems Support Mech for the procurement of solenoid valves. The contract is a fixed-price agreement with FOB-destination shipping and is designated as a total small business set-aside. It requires strict adherence to technical documentation, including Individual Repair Part Ordering Data (IRPOD), drawings, and military specifications, with a specific prohibition against the intentional use of mercury or mercury-containing compounds. Key requirements include mandatory vendor review of the IRPOD and compliance with specific packaging standards, such as MIL-PRF-23199 and MIL-STD 2073, particularly regarding cleanliness controls. The contractor must maintain an acceptable inspection system and provide a Certificate of Compliance per DI-MISC-81356 upon delivery. Pricing for quotations is generally valid for 60 days after the closing date, and the procurement process utilizes the Wide Area Workflow for payment and the Workflow Pro Mod Assist module for modifications.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

48--VALVE REGULATING SY, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYACP

This solicitation, issued by the Navsup Weapon Systems Support Mech, seeks a contractor for the repair and modification of a Valve Regulating System. The contract is a firm-fixed-price requirement that includes a one-year warranty from the date of delivery and a potential option for increased quantity within 365 days of the award. A critical requirement is the strict prohibition of metallic mercury and mercury contamination, as the equipment is intended for use on submarines and surface ships. The contractor is required to perform a teardown and evaluation of the provided carcass within 90 days to submit a final quote. The requested repair turn-around time is 180 days, and failure to meet this deadline will result in a per-unit price reduction. All work must comply with MIL-STD-129 for marking and MIL-STD-2073 for packaging. The award will be DO certified for national defense under the Defense Priorities and Allocations System.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

PROG CONTROL BOARD

Solicitation # N0010426QEH97

This solicitation is for the repair of the Prog Control Board under a firm-fixed-price arrangement. The process begins with a request for quotation to open, inspect, and evaluate the items. Upon acceptance of the quote, a contract will be issued, and the items will be shipped to the contractor for teardown and evaluation. Contractors must provide the repair turnaround time and monthly throughput constraints within their quotes, which remain valid for 60 days. The contract mandates strict adherence to technical documentation, including Individual Repair Part Ordering Data and specific military standards for packaging and cleanliness. It prohibits the intentional use of mercury and requires compliance with cybersecurity maturity model certification and various equal opportunity regulations. Quality assurance is managed through a government-approved inspection system, and final delivery requires a Certificate of Compliance submitted to the Navsup Wss-Mech code N9433.

Bare Printed Circuit Board Manufacturing

POSTED

about 2 hours ago

DEADLINE

VALVE,SAFETY RELIEF

Solicitation # N0010426QLB97

This solicitation, numbered N00104-26-Q-LB97, is issued by the Navsup Weapon Systems Support Mech for the repair of safety relief valves. The government is seeking quotations from authorized distributors of the original manufacturer, requiring a Repair Turnaround Time of 137 days. The contract is a fixed-price agreement that includes Government Source Inspection and requires the contractor to provide firm pricing for the repair, as well as a price for a new unit and its lead time for comparison. Key requirements include adherence to MIL-STD-130 for marking and MIL-STD 2073 for packaging. The contract specifies that failure to meet the required turnaround time will result in a price reduction per unit per month. An amendment has extended the solicitation response deadline to October 16, 2026. The award will be issued bilaterally, requiring written acceptance from the contractor, and includes an option for the government to increase the quantity of supplies at the specified unit price.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # N0010426QEH79

This solicitation, issued by the Navsup Weapon Systems Support Mech, is for the procurement of a specific processor, part number 6ES7417-5HT06-0AB0, manufactured by Siemens Energy & Automation, Inc. The contract is a fixed-price agreement with FOB-destination terms, requiring the processor to meet all specified design and material requirements. Key technical mandates include the strict exclusion of mercury and compliance with specific packaging standards, such as MIL-PRF-23199 and MIL-STD 2073, depending on cleanliness requirements. The agreement outlines a detailed order of precedence for document conflict resolution and requires contractors to maintain an acceptable inspection system for quality assurance. Bidders must provide a Certificate of Compliance per DI-MISC-81356 upon delivery. The solicitation also incorporates various federal clauses regarding equal opportunity, cybersecurity maturity model certification, and small business representations. Responses are due by October 19, 2026, and should be submitted to the primary point of contact at the Mechanicsburg, PA office.

Other Communications Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

48--SERVOVALVE ASSY, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RYAG8

This solicitation is for the repair and modification of Servovalve Assemblies for the Department of Defense, specifically under the Navsup Weapon Systems Support Mech. The contract requires the contractor to adhere to a Repair Turnaround Time of 321 days from the physical receipt of the asset, with an induction expiration date set for 365 days after the award. All work must comply with MIL-STD-130 for marking and MIL-STD-2073 for packaging, and the contractor must maintain inspection records for 365 days following final delivery. Key requirements include a strict prohibition of metallic mercury and mercury contamination, as the items are intended for use on submarines and surface ships. The contractor must be a government-approved source or submit a source approval request with their proposal to be considered for award. Additionally, the contract mandates the use of the Commercial Asset Visibility system for reporting transactions and requires adherence to specific quality assurance and inspection standards to ensure operational and functional requirements are met.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 2 months

59--ANTENNA, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYAFJ

This solicitation issued by the Navsup Weapon Systems Support Mech is for the repair and modification of antennas, specifically referencing CAGE code 03956 and reference number 1978835. The contract is DO certified for national defense under the Defense Priorities and Allocations System and utilizes Emergency Acquisition Flexibilities. The selected contractor must provide an estimated repair price and is required to complete a teardown and evaluation of the provided carcasses within 90 days to submit a firm-fixed price quote. Key requirements include a requested repair turn around time of 90 days, with financial penalties applied for failure to meet this schedule. The contractor must adhere to MIL-STD-130 for marking and MIL-STD 2073 for packaging. A one-year warranty from the date of delivery is required, and the government reserves the right to exercise an option for increased quantity within 365 days of the award. All work must be performed according to original manufacturer specifications and approved repair standards.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 2 months

VALVE,DIAPHRAM CONT

Solicitation # N0010426QLB50

This solicitation, issued under Emergency Acquisition Flexibilities, seeks repair services for the VALVE, DIAPHRAM CONT under a firm-fixed-price contract with a required Repair Turnaround Time (RTAT) of 234 days, measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. The Government requires strict adherence to military standards including MIL-STD-130 for Unique Item Identification, MIL-STD-129 for marking and packaging, and MIL-STD-2073-1 for packaging and preservation, with specific requirements for hazardous materials, electrostatic discharge protection, wood packaging compliance per ISPM 15, and shelf-life retention of at least 85% upon receipt. All repairs must follow the original manufacturer’s technical directives and drawings, with any design or part number changes requiring prior written approval from the Naval Inventory Control Point. Inspection and acceptance are mandatory at the contractor’s facility, with the Government retaining full rights to conduct independent inspections, and non-compliance can trigger rejection, Supply Discrepancy Reports, or termination for default. Price reductions will be applied per unit per month for unexcused RTAT delays, up to a capped amount specified by the contractor, and the contract allows for a contract option to increase quantities by up to 365 days post-award at the original unit price. The contractor must comply with cybersecurity requirements under NIST SP 800-171, submit Safety Data Sheets prior to award, and adhere to Buy American and Trade Agreements Act certifications. Invoicing is mandated through Wide Area WorkFlow (WAWF), and payment is processed via electronic funds transfer under prompt payment terms. The solicitation requires proof of being an authorized distributor of the original manufacturer, and performance must be supported by an active CAGE code. Past performance, assessed through SPRS color ratings, is prioritized over price in award decisions, and the Government evaluates offers on a trade-off basis. All responses must be submitted electronically via WAWF or email by the deadline of 22 JUL 2026, and quotations must include proposed RTAT, unit and total pricing, and any capacity constraints if unable to meet the required timeline. The contract is bilateral and requires formal contractor acceptance before execution.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS