Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Valve Component Supplier (Diaphragms/Internal Seals)

Active

Federal

Response Deadline10/16/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity with the Department of Defense Navsup Weapon Systems Support Mech involves the manufacture and supply of high-precision internal diaphragms and sealing components for prime contractors. The supplier will produce these components using specialized metal alloys, polymers, or elastomers according to strict technical specifications, providing all necessary quality assurance documentation and material certifications. Deliverables may consist of individual components or complete seal kits. The contract requires strict adherence to domestic end product or qualifying country standards as outlined in FAR 252.225-7020. Interested parties must submit their responses by October 16, 2026, under NAICS code 332999.

General Info

DoD subcontract for high-precision diaphragms and seals; responses due by October 16, 2026.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010426QLB50.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

VALVE,DIAPHRAM CONT

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 21

subcontract

Response DeadlineOct 16

Submission deadline

Response Deadline

10/16/2026, 08:30:00 PM UTCin 25 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Navsup Weapon Systems Support Mech

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies internal diaphragms or sealing components for prime contractors on NAVSUP Weapon Systems Support projects. Manufactures high-precision diaphragms or seals using specialized elastomers, polymers, or metal alloys to technical specifications. Provides material certifications and quality assurance documentation. Must meet domestic end product or qualifying country requirements per FAR 252.225-7020. Delivers individual diaphragm components or seal kits.

Similar Contracts

Same NAICS industry code

53--COVER,ACCESS

Solicitation # N0010426RZB85

This presolicitation for solicitation N0010426RZB85 involves the procurement of four access covers under NSN 1H-5340-014539267-L1. The items are to be delivered to the Portsmouth Naval Shipyard in Kittery, Maine. The government possesses full rights to the technical data package, meaning there are no manufacturing or engineering restrictions, making these parts candidates for full and open competition. This is a level 1 item that must be acquired from approved sources, and awardees must have an inspection system conforming to MIL-I-45208A or an equivalent standard certified by a joint DCMA/NAVSUP WSS survey team. The acquisition is 100 percent set aside for small business concerns, with specific designations to be determined in the final solicitation. All interested firms must include their CAGE code on solicitation requests. The procurement is managed by the Navsup Weapon Systems Support in Mechanicsburg, Pennsylvania, and is not being conducted under FAR Part 12 for commercial items. Responses are due by November 4, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Hardwood pistol rack with 14 aluminum pins

Solicitation # 70LART26QPFB00029

Solicitation 70LART26QPFB00029 is a firm-fixed-price request for quotation issued by the Department of Homeland Security's Federal Law Enforcement Training Centers for the procurement of 150 pistol racks. This requirement is a total small business set-aside under NAICS code 332999, with the award based on the lowest priced technically acceptable offer. The contract specifies a period of performance from September 22, 2026, to October 7, 2026, with a final delivery deadline of October 7, 2026, delivered FOB Destination to Artesia, New Mexico. The technical specifications require the racks to be constructed from 3/4 inch HDPE with a base plate measuring 22.75 inches long and 4 inches wide. Each rack must feature 13 aluminum pins made of 6061 aluminum, measuring 1/4 inch in diameter and 4 inches in length, spaced 1.5 inches on center and secured using a combination of press-fit and adhesive. The rear plate must also be 6061 aluminum, and the assembly must utilize 1/4 inch by 1.5 inch countersunk screws. Vendors must provide a drawing and photograph for pre-production approval and ensure that bulk packaging and palletizing clearly state item quantities per package. Quotes were due by September 21, 2026.

Fletc Artesia Procurement Office

POSTED

DEADLINE

in about 5 hours

Req 44986 Fire Rings

Solicitation # 5662622

The Province of British Columbia, through its Procurement Services Branch, has issued solicitation number 5662622 for the procurement of fire rings under requisition 44986. This opportunity is open for responses until September 29, 2026, with the performance of the contract taking place within British Columbia. Interested parties can find further details and submit their responses via the BC Bid portal. The solicitation was officially posted on September 18, 2026, and is managed as a general procurement action by the provincial government.

Procurement Services Branch

POSTED

DEADLINE

Marine Anode SupplyThis subcontract for Marine Anode Supply involves the procurement of aluminum alloy anodes designed for cathodic protection systems at Texas General Land Office TCOON station projects. The selected provider is responsible for manufacturing or sourcing materials that meet specific marine specifications based on field inspection recommendations and must provide full material certifications for all supplied anodes. The scope of work includes the delivery of these materials directly to the project site or the designated prime contractor. This opportunity is associated with NAICS code 332999 and is managed under the Texas General Land Office, with a response deadline set for October 19, 2026.

General Land Office

POSTED

DEADLINE

Supply of Exhaust Pipe (NSN 2990013232562)This subcontract through the Department of Defense Land Supply Chain involves the procurement of one exhaust pipe, identified by NSN 2990013232562. The selected provider is responsible for manufacturing or sourcing the component according to strict technical specifications, ensuring it is packaged per ASTM D3951, palletized per RP001, and marked in accordance with MIL-STD-129. The final product must be delivered to the designated government location at Fort Drum, New York. This opportunity falls under NAICS code 332999, with a response deadline set for September 23, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Warning Streamer Pins (NSN 1730-01-063-9717)This subcontract involves the manufacture or sourcing of eight specialized warning streamer pins, identified by NSN 1730-01-063-9717, for prime contractors delivering to DLA Troop Support. The selected provider must supply First Article Units for government testing and maintain strict supply chain traceability documentation in accordance with C03 requirements. All deliverables must comply with the Buy American Act as specified in DFARS 252.225-7001. The contract is managed under NAICS code 332999 for the Department of Defense, with performance taking place in Clearfield, Utah. Interested parties must respond by October 13, 2026, to fulfill the requirement for the units and their associated traceability documentation.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Vehicular Operation Panel Housing SupplyThis subcontract with the Department of Defense, specifically the Land Supplier Opns Vehicle Spt agency, requires the manufacture or sourcing of 25 units of a vehicular operation panel housing. The specific part is identified by NSN 2510-01-678-8813 and must be produced according to strict technical specifications. Performance will take place in New Cumberland, Pennsylvania. The contractor must ensure full compliance with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, as well as IP056 and 29 CFR 1910.1200 regulations. This agreement supports prime contractors on DLA supply contracts under NAICS code 332999. The response deadline for this opportunity is September 23, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Gasket Supply (NSN 5330017332292)This subcontract involves the procurement and delivery of one industrial gasket, identified by NSN 5330017332292, for prime contractors supporting the Department of Defense Land Supplier Operations Vehicle Support agency. The supplier is responsible for ensuring the unit complies with RA001 general technical and quality requirements as well as RP001 packaging standards, with technical data verification conducted through the DLA portal. The contract is categorized under NAICS code 332999 and specifies a place of performance in North Stonington, Connecticut. The solicitation was posted on September 18, 2026, with a response deadline of September 23, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Duct Assembly, Start (NSN 1560-01-290-5140)This subcontract involves the manufacture and supply of 369,000 duct assemblies for prime contractors supporting Department of Defense DLA supply contracts. The production must strictly adhere to technical specifications for NSN 1560-01-290-5140, utilizing specialized tooling to ensure high-volume hardware quality. Compliance with RQ001 Higher Level Contract Quality Requirements is mandatory, with specific packaging and marking standards defined by RP001 and RQ017. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332999 and is managed by the ASC Supplier OE and AF Division. Interested parties must submit responses by October 4, 2026, for this requirement posted on September 18, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supplier of Cellular Structural Core MaterialThis subcontract involves the supply of cellular structural core material for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment contracts. The supplier is responsible for manufacturing or sourcing part number AMSC74383_1 -1/8-(7(5052N)CL2 in accordance with specification 5680-01-123-0814, with a total delivery of one unit. The contractor must adhere to strict compliance standards, including supply chain traceability per C03 (JUN 2023) and hazardous materials packaging requirements under FED-STD-313 and TQ Requirement IP025. Additionally, the provider must comply with the Buy American and Balance of Payments Program. This opportunity is managed under NAICS code 332999 for the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Ring Spacers (NSN 5365-01-063-6859)This subcontract with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, involves the procurement of ring spacers under NSN 5365-01-063-6859. The selected provider is responsible for fabricating or sourcing these parts in strict accordance with the DLA Master List of Technical and Quality Requirements RA001 and must ensure all products are mercury-free per IP056. Additionally, the manufacturing facility must be registered with a valid CAGE code and deliver the items in compliant packaging. The opportunity was posted on September 18, 2026, with a response deadline of September 24, 2026. It falls under NAICS code 332999 and is managed through the DIBBS system.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720004039973)This subcontract through the Department of Defense Fluid Handling Division involves the supply of 34 nonmetallic hose assemblies for prime contractors delivering DLA supply contracts. The required equipment must match NSN 4720004039973 and Manufacturer Part Number 179-50072 from Designed Metal Connections Inc. All deliverables must strictly adhere to RP001 packaging standards and RQ011 identification requirements. The performance of this contract is centered at Hill AFB, zip code 84056-5734. Classified under NAICS code 332999, the opportunity was posted on September 18, 2026, with a response deadline of September 23, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

MIL-SPEC Packaging and Marking ServiceThe MIL-SPEC Packaging and Marking Service is a subcontract for the Department of Defense, specifically supporting NAVSUP Weapon Systems Support projects. The contractor is responsible for providing specialized military marking and packaging for prime contractors, which includes the application of ECC200 2D barcodes and DLR labels sourced from Naval Forms Online. The service requires strict adherence to MIL-STD-129 for shipment labeling and verification of machine readability according to MIL-STD-130 Appendix A. Using industrial 2D barcode printers and automated scanners, the contractor will deliver fully marked and labeled shipping containers and units. This opportunity falls under NAICS code 561910, with a response deadline of October 16, 2026.

Packaging and Labeling Services

POSTED

about 2 hours ago

DEADLINE

Diaphragm Control Valve SupplierThis subcontract involves the supply of finished Diaphragm Control Valves for prime contractors supporting NAVSUP Weapon Systems Support projects under the Department of Defense. The scope of work includes the fabrication and assembly of valves, requiring precision machining and the use of specialized 2D barcode verification hardware. All units must be delivered completed, labeled, and packaged. Compliance with strict identification marking standards is mandatory, specifically adhering to MIL-STD-130. This includes implementing 2D barcodes using ECC200 and data encoding per ISO/IEC 15434, as well as the application of DLR labels to both individual units and their containers. The opportunity is categorized under NAICS code 332919, with a response deadline of October 16, 2026.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # N0010426QZB70

This solicitation is for the procurement of Compartment Salvage Ball Valves for the U.S. Navy, managed by NAVSUP WSS Mechanicsburg. The material is designated as Special Emphasis (Level I), meaning it is used in crucial shipboard systems where failure could result in serious injury or loss of the vessel. Consequently, the contract mandates rigorous quality control, including strict material traceability, quantitative chemical and mechanical analysis for specific components, and comprehensive non-destructive testing such as liquid penetrant and ultrasonic inspections. The contractor must adhere to a wide array of military and industry specifications, including MIL-DTL-1222 and ISO 9001. Key requirements include the use of specific materials like Mearthane for seats and the application of permanent traceability markings on all components. Final acceptance is based on a zero-defect policy, and the award will be DPAS DO certified for national defense. The solicitation requires a bilateral agreement for execution and emphasizes the importance of past performance in the evaluation of offers.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

PARTS KIT,BALL VALV

Solicitation # N0010426QYAGR

This fixed-price solicitation, issued by NAVSUP Weapon Systems Support Mech, seeks a contractor for the teardown, evaluation, repair, and modification of ball valve parts kits (NSN 4820-01-345-5706). The requirement is processed under Emergency Acquisition Flexibilities and is DX certified for national defense. The contractor must provide an estimated repair price and is granted 90 days following the receipt of carcasses to perform a teardown and evaluation before submitting a firm-fixed-price quote for the full repair effort. A requested repair turnaround time (RTAT) of 120 days is established, and failure to meet this timeline will result in a per-unit price reduction. The government also retains an option to order an additional quantity of up to 100% for 365 days after the award at the same price. The award will be made to a single eligible offeror based on the most advantageous combination of price and past performance, with past performance weighted as more important than price. Technical requirements include strict adherence to MIL-STD-130 for physical identification, MIL-STD-2073 for packaging, and a total prohibition of metallic mercury contamination. Quality assurance must comply with MIL-I-45208 or ISO 9001/9002 standards. Inspection and acceptance will occur at the contractor's or subcontractor's plant. All payment requests and receiving reports must be processed electronically through the Wide Area Workflow system.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # N0010426QBW58

This solicitation, number N0010426QBW58, is issued by the Department of Defense via the Navsup Weapon Systems Support Mech for the procurement of solenoid valves. The contract is a fixed-price agreement with FOB-destination shipping and is designated as a total small business set-aside. It requires strict adherence to technical documentation, including Individual Repair Part Ordering Data (IRPOD), drawings, and military specifications, with a specific prohibition against the intentional use of mercury or mercury-containing compounds. Key requirements include mandatory vendor review of the IRPOD and compliance with specific packaging standards, such as MIL-PRF-23199 and MIL-STD 2073, particularly regarding cleanliness controls. The contractor must maintain an acceptable inspection system and provide a Certificate of Compliance per DI-MISC-81356 upon delivery. Pricing for quotations is generally valid for 60 days after the closing date, and the procurement process utilizes the Wide Area Workflow for payment and the Workflow Pro Mod Assist module for modifications.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

48--VALVE REGULATING SY, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYACP

This solicitation, issued by the Navsup Weapon Systems Support Mech, seeks a contractor for the repair and modification of a Valve Regulating System. The contract is a firm-fixed-price requirement that includes a one-year warranty from the date of delivery and a potential option for increased quantity within 365 days of the award. A critical requirement is the strict prohibition of metallic mercury and mercury contamination, as the equipment is intended for use on submarines and surface ships. The contractor is required to perform a teardown and evaluation of the provided carcass within 90 days to submit a final quote. The requested repair turn-around time is 180 days, and failure to meet this deadline will result in a per-unit price reduction. All work must comply with MIL-STD-129 for marking and MIL-STD-2073 for packaging. The award will be DO certified for national defense under the Defense Priorities and Allocations System.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

PROG CONTROL BOARD

Solicitation # N0010426QEH97

This solicitation is for the repair of the Prog Control Board under a firm-fixed-price arrangement. The process begins with a request for quotation to open, inspect, and evaluate the items. Upon acceptance of the quote, a contract will be issued, and the items will be shipped to the contractor for teardown and evaluation. Contractors must provide the repair turnaround time and monthly throughput constraints within their quotes, which remain valid for 60 days. The contract mandates strict adherence to technical documentation, including Individual Repair Part Ordering Data and specific military standards for packaging and cleanliness. It prohibits the intentional use of mercury and requires compliance with cybersecurity maturity model certification and various equal opportunity regulations. Quality assurance is managed through a government-approved inspection system, and final delivery requires a Certificate of Compliance submitted to the Navsup Wss-Mech code N9433.

Bare Printed Circuit Board Manufacturing

POSTED

about 2 hours ago

DEADLINE

VALVE,SAFETY RELIEF

Solicitation # N0010426QLB97

This solicitation, numbered N00104-26-Q-LB97, is issued by the Navsup Weapon Systems Support Mech for the repair of safety relief valves. The government is seeking quotations from authorized distributors of the original manufacturer, requiring a Repair Turnaround Time of 137 days. The contract is a fixed-price agreement that includes Government Source Inspection and requires the contractor to provide firm pricing for the repair, as well as a price for a new unit and its lead time for comparison. Key requirements include adherence to MIL-STD-130 for marking and MIL-STD 2073 for packaging. The contract specifies that failure to meet the required turnaround time will result in a price reduction per unit per month. An amendment has extended the solicitation response deadline to October 16, 2026. The award will be issued bilaterally, requiring written acceptance from the contractor, and includes an option for the government to increase the quantity of supplies at the specified unit price.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # N0010426QEH79

This solicitation, issued by the Navsup Weapon Systems Support Mech, is for the procurement of a specific processor, part number 6ES7417-5HT06-0AB0, manufactured by Siemens Energy & Automation, Inc. The contract is a fixed-price agreement with FOB-destination terms, requiring the processor to meet all specified design and material requirements. Key technical mandates include the strict exclusion of mercury and compliance with specific packaging standards, such as MIL-PRF-23199 and MIL-STD 2073, depending on cleanliness requirements. The agreement outlines a detailed order of precedence for document conflict resolution and requires contractors to maintain an acceptable inspection system for quality assurance. Bidders must provide a Certificate of Compliance per DI-MISC-81356 upon delivery. The solicitation also incorporates various federal clauses regarding equal opportunity, cybersecurity maturity model certification, and small business representations. Responses are due by October 19, 2026, and should be submitted to the primary point of contact at the Mechanicsburg, PA office.

Other Communications Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

48--SERVOVALVE ASSY, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RYAG8

This solicitation is for the repair and modification of Servovalve Assemblies for the Department of Defense, specifically under the Navsup Weapon Systems Support Mech. The contract requires the contractor to adhere to a Repair Turnaround Time of 321 days from the physical receipt of the asset, with an induction expiration date set for 365 days after the award. All work must comply with MIL-STD-130 for marking and MIL-STD-2073 for packaging, and the contractor must maintain inspection records for 365 days following final delivery. Key requirements include a strict prohibition of metallic mercury and mercury contamination, as the items are intended for use on submarines and surface ships. The contractor must be a government-approved source or submit a source approval request with their proposal to be considered for award. Additionally, the contract mandates the use of the Commercial Asset Visibility system for reporting transactions and requires adherence to specific quality assurance and inspection standards to ensure operational and functional requirements are met.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 2 months

59--ANTENNA, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYAFJ

This solicitation issued by the Navsup Weapon Systems Support Mech is for the repair and modification of antennas, specifically referencing CAGE code 03956 and reference number 1978835. The contract is DO certified for national defense under the Defense Priorities and Allocations System and utilizes Emergency Acquisition Flexibilities. The selected contractor must provide an estimated repair price and is required to complete a teardown and evaluation of the provided carcasses within 90 days to submit a firm-fixed price quote. Key requirements include a requested repair turn around time of 90 days, with financial penalties applied for failure to meet this schedule. The contractor must adhere to MIL-STD-130 for marking and MIL-STD 2073 for packaging. A one-year warranty from the date of delivery is required, and the government reserves the right to exercise an option for increased quantity within 365 days of the award. All work must be performed according to original manufacturer specifications and approved repair standards.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 2 months

VALVE,DIAPHRAM CONT

Solicitation # N0010426QLB50

This solicitation, issued under Emergency Acquisition Flexibilities, seeks repair services for the VALVE, DIAPHRAM CONT under a firm-fixed-price contract with a required Repair Turnaround Time (RTAT) of 234 days, measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. The Government requires strict adherence to military standards including MIL-STD-130 for Unique Item Identification, MIL-STD-129 for marking and packaging, and MIL-STD-2073-1 for packaging and preservation, with specific requirements for hazardous materials, electrostatic discharge protection, wood packaging compliance per ISPM 15, and shelf-life retention of at least 85% upon receipt. All repairs must follow the original manufacturer’s technical directives and drawings, with any design or part number changes requiring prior written approval from the Naval Inventory Control Point. Inspection and acceptance are mandatory at the contractor’s facility, with the Government retaining full rights to conduct independent inspections, and non-compliance can trigger rejection, Supply Discrepancy Reports, or termination for default. Price reductions will be applied per unit per month for unexcused RTAT delays, up to a capped amount specified by the contractor, and the contract allows for a contract option to increase quantities by up to 365 days post-award at the original unit price. The contractor must comply with cybersecurity requirements under NIST SP 800-171, submit Safety Data Sheets prior to award, and adhere to Buy American and Trade Agreements Act certifications. Invoicing is mandated through Wide Area WorkFlow (WAWF), and payment is processed via electronic funds transfer under prompt payment terms. The solicitation requires proof of being an authorized distributor of the original manufacturer, and performance must be supported by an active CAGE code. Past performance, assessed through SPRS color ratings, is prioritized over price in award decisions, and the Government evaluates offers on a trade-off basis. All responses must be submitted electronically via WAWF or email by the deadline of 22 JUL 2026, and quotations must include proposed RTAT, unit and total pricing, and any capacity constraints if unable to meet the required timeline. The contract is bilateral and requires formal contractor acceptance before execution.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS